How to identify which playlists a song is in?

As I organize my songs into playlists, I sometimes find I hadn't put a song into a playlist when I thought I had. Is there any way to show which playlists a song belongs to?

Right click on the song, and hit Show in Playlist.

Similar Messages

  • Tip: How to play a playlist one song at a time from iTunes on a computer using the checkbox property

    I would like to share a tip about how to play a playlist one song at a time from iTunes on a computer. The tip I am sharing is simple, but I was not able to find it in the iTunes Help. After searching on the internet I found the idea for this solution in a discussion in which this was presented as a frustrating problem rather than a desired behavior. This tip relies on the checkbox for each song in iTunes. For a song in a playlist to play automatically, the checkbox must be checked. To keep a song from playing in a playlist, simply uncheck it. Therefore, to keep all songs from playing automatically in a playlist, simply uncheck them all. Now you have a list of desired songs in a desired order but none of them will play automatically. You can play each one when you want to play it without having to search for the next song and without having to be at the computer to stop the playing after each song.
    Step by step:
    1. Create the playlist.
    2. Uncheck all of the check boxes in the playlist (In iTunes for Windows, ctrl click one of the check marks to uncheck all of the checkboxes at once) 
    3. Now double click (or select and press spacebar) a song to play it. It will stop when finished because there is no other song checked to be played next.
    4. If you want to change back to normal sequential play, ctrl click one of the check marks again to change all of the checkboxes back to the checked status.
    Based on some discussions I found while looking for a solution (including at least one in which the questioner got bashed about why anybody would ever want to do such a thing and in which the proposed solutions were things like creating one song playlists or simply press stop after each song), some may not understand why this would ever be desired.  Here's why I wanted to do it:
    I was responsible for playing a series of songs at a dance. I needed to stop after each song to have a transition time to allow me to introduce the next song and to give new dancers time to get onto the floor and other dancers an opportunity to leave the floor. Furthermore, I was also dancing and didn't want to have to spend time searching for the next song (which is why I wanted to create a playlist in advance with just the songs I wanted to play in the order I wanted to play them) and I wanted each song to stop after playing since I was not at the computer to press stop.
    I hope this will help others who have a similar need.

    Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my  Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.

  • How to identify which is rootsite/webapplication url and which are site collection url ?

    How to identify which is rootsite/webapplication url and which are site collection url underneath of web application using powershell script in following code?
    # Get site objects
    $webapplication = Get-SPWebApplication $siteUrl
    # Walk through each site in the site collection
    foreach($site in $webapplication.Sites)
    foreach($subWeb in $site.AllWebs)
    $_ = AddLevel123($subWeb.Url)

    Hi,
    Hope you wanted to know which API is Site collection (SPSite) and Sub site(SPWeb) 
    $webapplication.Sites = Site Collection (SPSite)
    and $site.AllWebs = Subsite (SPWeb)
    and see these links - to get webApplication URL
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/e223b607-ab35-454a-a050-1db3005687e5/spwebapplication-url?forum=sharepointdevelopmentlegacy
    SPSite Url - SPSite.Url (http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.spsite.url.aspx)
    SPweb URl - SPWeb.URL (http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.spweb.url.aspx)
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/b4dfb645-69f4-4abd-947c-64ca42af3a26/script-to-get-list-of-sites-and-subsites
    Hope this helps!
    MCITP: SharePoint 2010 Administrator
    MCTS - MOSS 2007 Configuring, .NET 2.0
    | SharePoint Architect | Evangelist |
    http://www.sharepointdeveloper.in/
    http://ramakrishnaraja.blogspot.com/

  • How to identify which videos

    I took a dozen or so short clips of an event. I know which three I want to combine and edit. But I can't figure out how to identify which they are in imovie in order to put those clips in my project. It shows them all as consecutive clips or frames, without file numbers or names.

    I'll try to explain better.
    A dozen clips or videos, 1 min to 5 min in length. In one case all along a mountain road.
    I want to produce a 5 min project or video with the best parts of 3 of those 12.
    All 12 have thumbnails almost identical (the dashboard across the bottom, roof line at the top)
    I only want to start editing the 3, not put all 12 in.
    How do I identify those 3?

  • How to identify Which function modules are used in the planning area?

    Hi all,
    there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
    But how to identify which function module is used in which planning area?
    I cant find out from the where used list from function modules?
    Thanks
    pooja

    Hi Pooja,
    Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
    Regards,
    Indu

  • How to identify Which ports are using in RAC setup?

    Hi,
    how to identify Which ports are using in RAC setup?
    Thnaks,

    [Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

  • How to identify which DC to modify?

    I need to change the iView u201CChange Own Datau201D in ESS.
    ESS -> Employee search -> Change Own Data
    How to identify which DCs to modify in development configuration?
    Greatly appreciated for any comment/suggestion!

    Hi,
           The purpose of each DC is modifying different Iviews (Ex:you need to modify Change Own data like that some other needs to change some other Iview may be this Iview will be present in another DC).
    based on our requirement we need to modify different different DCs.
    yes you need to modify in the DC as i mentioned..
    Regards,
    Anil.

  • How to identify which key figure will the numeric pointer for deltas?

    Hi All,
    I have created a numeric pointer for generic extraction ? but how to identify which key figure will the numeric pointer will use for deltas ?
    how to identify the key figures which is suitable for numeric pointer. And the generic extraction is based upon the copa table?
    Can anyone suggest me how the numeric pointer works and how to identify deltas are carried out at numeric pointer?
    Thanks
    Pooja

    Pooja,
    If you are using a generic extractor which is based on COPA table, then numeric pointer may not be the suggested delta extraction mechanism. 
    A time stamp would be the better one to use.  In a time stamp, you can give a lower limit value of 300 seconds.. so that it will try to fetch the missed records.
    Moreover, a delta would be based on a character, preferably a time char.
    In your requirement, try to figure out the character on whichdeltas will be based.
    Sasi

  • How to identify which record(s) the user hasbeen checked

    i have a internal table in which first field is represented as check box in the output .
    like bellow
      loop at g_it_final into g_wa_final.
            write : 5 sy-tabix ,
                   20 g_wa_final-g_v_check as checkbox,
                   25 g_wa_final-TRKORR,
                   40 g_wa_final-AS4TEXT.
      endloop.
    now the user will select some records from the output checking the check box
    NOW the QUESTION is
    how to identify which record(s) the user hasbeen checked(selected) ?
    so that i can disply only the selected records in the secondary list.

    Hi,
    You will have to use the 'READ LINE' command within a loop to retrieve the data back into your program.
    You may want to use the HIDE command to ease the retrieval of the checkbox value.
    Check out the online help for both of these.
    Darren

  • How to identify which Internal order type is relevant for Budget manager

    Hi,
        How to identify which Internal order type is relevant for Budgeting i.e Budget Manager.
    regards,
    Rajesh

    controlling-internal orders-budegeting and availability control -define tolerance limits for availabilty control
       in which it is defined whether mail be sent to budget manager against the budget profile(budget profile is assigned to order type).
    controlling-internal orders-budegeting and availability control -define tolerance limits for availabilty control-maintain budget manager
    here budget manager is assigned to  order type
    assign me points if it is useful

  • How to identify which applicarion is using the DVD burner?

    How to identify which applicarion is using the DVD burner? Ot is not allow me to burn the DVDs genetrated in the Final Cut 7

    I think you'll find that the application is Final Cut Pro...  the message is bug.  I get a similar message when disconnecting external drives after using them with FCP (even when the project is no longer loaded.)
    As I mentioned above, the accepted workflow is to export the sequence to one of your hard drives using the Export>QuickTime Movie path with Settings:Current Settings and Make Movie Self-Contained checked like this:
    This gets you a high quality "master copy" which you open in Compressor for transcoding. You should use the DVD: Best Quality setting for the duration of your movie.
    this gets you the high quality MPEG-2 and AC-3 files for DVD Studio Pro authoring.
    If you've never used DVD Studio Pro before, you can use iDVD instead. For iDVD, you just drag and drop your "master" on iDVD and it takes it from there. Both make a very professional product.
    hope this helps.

  • How to identify which root certificate is used?

    How to identify which root certificate(on terminal) is used when a terminal is connecting to a https website?
    SecurityInfo.getServerCertificate() only returns the certificate send from the https server.
    But how could know the which local root certificate is used to verify the certificate send from the https server?
    Is there a method or class in MIDP 2.1?
    Thanks

    UP�Cthis question is urgent. Hope anyone can answer me!

  • How to choose which playlists goes onto ipod

    I want to put songs onto my ipod but not my "music" playlist, I have a playlist that I want put onto my ipod but just not all my music, does anyone know how I can choose which playlist gets put onto my ipod? Thanks

    Welcome to AD!
    It's simple, but you have to have "manually managed music" unchecked in the ipod summary tab.
    Once that is unchecked, you can go to teh iPod's music tab and check the option to "Only sync these playslists".

  • How to Identify which Source Row is causing a slowdown in the Indexing?

    Every so often the Indexing seems to hit a wall and we gaet a huge backlog of text files that need to be indexed. We get about 2 to 3 million files per day. Most of the time the problem gets resolved when we increase the degree parallel. How can we identify which text file is causing the problem?
    Regards

    I wonder if the problem is becuse of some bug when the DR$PENDING gets to zero rows. Apparently this causes the query on CTX_USER_PENDING to take a long time. I use that view to determine the partitions to pass to SYNC_INDEX procedure.
    select
    pnd_partition_name
    ,count(*)
    from ctx_user_pending
    where pnd_index_name = '<index_name>'
    group by
    pnd_partition_name
    /This takes about 5 seconds for tow rows with 335 and 13 rows.
    Tables DR$INDEX, DR$INDEX_PARTITION and DR$PENDING have had Statistics gathered
    This query has taken over 45 minutes.

  • How to identify which server are connected in a switch?

    Hi,
    Many servers are connected to a switch?
    How to identify what server are connected to which port remotely?
    Thanks!
    Samuel

    Hi Sam,
    just issue the command show ip arp , it will display some thing like this for know the MAC address & the VLAN number.
    Protocol Address Age (min) Hardware Addr Type Interface
    Internet 10.2.1.18 9 0800.6913.710e ARPA Vlan2
    to know on which port it is connected, just issue the command as mentioned below
    sh mac-address-table address 0800.6913.710e
    Mac Address Table
    Vlan Mac Address Type Ports
    2 0800.6913.710e DYNAMIC Po1
    hpe this will help you to identify your servers.
    rate this post.

Maybe you are looking for