How to identify Which ports are using in RAC setup?

Hi,
how to identify Which ports are using in RAC setup?
Thnaks,

[Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

Similar Messages

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

How to identify which applicarion is using the DVD burner?

How to identify which applicarion is using the DVD burner? Ot is not allow me to burn the DVDs genetrated in the Final Cut 7

I think you'll find that the application is Final Cut Pro... the message is bug. I get a similar message when disconnecting external drives after using them with FCP (even when the project is no longer loaded.)
As I mentioned above, the accepted workflow is to export the sequence to one of your hard drives using the Export>QuickTime Movie path with Settings:Current Settings and Make Movie Self-Contained checked like this:
This gets you a high quality "master copy" which you open in Compressor for transcoding. You should use the DVD: Best Quality setting for the duration of your movie.
this gets you the high quality MPEG-2 and AC-3 files for DVD Studio Pro authoring.
If you've never used DVD Studio Pro before, you can use iDVD instead. For iDVD, you just drag and drop your "master" on iDVD and it takes it from there. Both make a very professional product.
hope this helps.

Which ports are used by LMS 4.2.5 Software Center

Hi everybody!
we are trying to download device updates and packages via the software center of lms 4.2.5. but get the attached error msg.
Which ports are used for the download (for firewall configuration)
I can't find the used ports for this function in the install guide.....
I am very thankful for any suggestions!
Edit:
here is the log output:
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
there is no proxy in use, so the is none configured :)

Hi,
Looks like you are encountering this BUG
CSCur85172    Unable to installing the device packages from cisco.com using LMS Server
Try this to resolve the issue::
Stop Daemon Manager
2.            Change the protocol 'http' to 'https' for the below URL's in vds.properties
file located under /NMSROOT/lib/classpath/com/cisco/nm/xms/vds/.
NGCcoScript=http://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=http://tools.cisco.com/software/catalog/swcs/image
TO
NGCcoScript=https://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=https://tools.cisco.com/software/catalog/swcs/image
3.            Start the Daemon Manager.
Thanks-
Afroz
****Ratings Encourages Contributors ****

Which ports are used by oracle datbase and management agent other than 1521

Hi,
Which ports are used by oracle datbase and management agent other than 1521 and the default port of management agent?
Regards,
Rjiv.

Check Port Numbers and Protocols of Oracle Components and also check your portlist.ini in $ORACLE_HOME/install directory.

How to identify which server are connected in a switch?

Hi,
Many servers are connected to a switch?
How to identify what server are connected to which port remotely?
Thanks!
Samuel

Hi Sam,
just issue the command show ip arp , it will display some thing like this for know the MAC address & the VLAN number.
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.2.1.18 9 0800.6913.710e ARPA Vlan2
to know on which port it is connected, just issue the command as mentioned below
sh mac-address-table address 0800.6913.710e
Mac Address Table
Vlan Mac Address Type Ports
2 0800.6913.710e DYNAMIC Po1
hpe this will help you to identify your servers.
rate this post.

How to determine which processes are using a module?

I want to find out which processes are using a kernel module.
However this info is shown neither with ``lsmod'' nor in
/sys/modules/<mod_name>/.
It's needed to reload certain modules which are acting buggy,
in a bash script. Right now I just keep a list of processes which
use the module and try to kill'em all, not exactly a beautiful
solution.
To work around it I compiled a kernel with
``CONFIG_MODULE_FORCE_UNLOAD=y'', however actually
trying to unload anything with this results in an unstable system.
Suggestions?

After successfully syncing the configuration database I ran the configuration compliance job once more, however with the same (misleading) results. Cross-checking the configuration reveals that none of the devices marked as compliant are actually having the "ip helper-address" configured.
Maybe it is something wrong with the input data I specified for the compliance template (ref step 1-6 in my first post)?
Or maybe the Compliance Jobs arent the best ways to determine whether or not my devices are having the "ip helper-address" configuration defined?

Identifying which clips are used in browser

I am learning FCP for the first time but I am extremely familiar with editing video on a PC. My version of FCP is 6.0.6. I really want a way to see in the browser which clips I have used in a sequence. I know I could manually mark each take by using a label but that is a huge time waste with hundreds of clips in my program. Show duplicate frames is helpful in figuring out if I have used a shot before but I want to avoid having to ever even put the same shot into the time line.
If I have 100 shots and I have used 75, I want a fast way to see the other 25 shots in my browser so I don't waist time trying every shot to see if there are duplicated frames in my time line. And I don't want to have to manually change a label every time I edit in a shot for the first time.
Premier does this so much better.
Thank you.

Thank you but I know how to enable "Show Duplicate Frames." I want to avoid needing to use this in the first place.
In Premier's equivalent to the browser window we have a field labeled "used" and it's checked if we have used the clip in the time line / sequence. Then I can instantly see which clips I have pulled nothing from.
Yes I could edit my piece and use the "Show Duplicate Frames" to find out I used 30 clips twice or more in a montage. I want to avoid putting the clips into the sequence it first place so I don't waste time. I also don't want to waste time editing a clip to the time line just to find out if I have used it before with the Show Duplicate Frames setting enabled. That wasts lots of time when you have a large number of clips. I don't want to try say 50 clips in the time line to find the 1 or 2 that I haven't already used.
I want to be able to see what clips are used in any sequence from within the browser so I can quickly see what's left. This is not Show Duplicate Frames. Again I understand what that setting does and it is helpful but not what I am talking about.
Thank you,
David

How to identify reports that are using a specific universe object?

Any idea how to use BO Auditor or Metadata Manager to identify webi reports that are using a specific universe object or universe prompt in the report SQL?

Hi Samuel,
In case you are using BOXIR2 you can do this by editing the crystalenterprise.webi.xml file.
Replace the CrystalEnterprise.Webi.xml file (Take a backup) with the edited one.
Path where you can find this file- Tomcat/webapps/businessobjects/enterprise115/desktoplaunch/WEB-INF/classes/META-INF/CrystalEnterprise.Webapps/ePortfolio/plugins
Paste the Custom Documentation folder in Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\
May I know your email Id so that I can send you the edited crystalenterprise.webi.xml file.
Regards,
Sarbhjeet Kaur

Which ports are used by XE

Hi,
right now I am testing XE on a fresh installed SuSE-10 machine without any firewall, because the machine has no connection to the internet. But when I start the firewall, which ports should I keep open for XE? Only 1521 and 8080 (when I accept the defaults during installation)???

It really depends on what you are trying to accomplish. Probably port 8080 ...
Understand that Oracle provides a listener that serves several functions, but is in essence the same as inetd ... the listener listens on behalf of services and then tells the service and the requestor to connect.
For the baseline database service, the listener watches on port 1521 for a network-based request. When received, the listener tells the database service and the requestor to 'go play elsewhere'. (This is not the case for a bequeath request - within the local machine - which is why "sqlplus / as sysdba" does not even need the listener up.)
If you plan on allowing Oracle Networking requests from other machines (Java, sqlplus, .Net, etc) you will need to allow ports other than 1521.
The listener also listens on one or more ports for the Enterprise PL/SQL Gateway that provides http, ftp and OraDAV access. The default for this in XE is port 8080, although you can change that by calling the appropriate procedure [dbms_xdb.sethttpport(8080)]
If you plan on supporting HTMLDB connections, opening 8080 (or whatever you set) is required.
On my machine, using the lsof command, I note that
- when the listener is down, the database has one socket open looking for listener
- when listener is up, a port is assigned, presumably for the DB<->listener communication
.... this results in two handles on the selected, but random, port
- making an http htmldb request to login page opens the http-alt (8080) port
.... if from a local browser, it results in 2 handles
.... if from a remote browser, it results in one handle on the XE machine
- logging in releases that port
- making a SQLPlus connection opens a random port
.... if from a local host, results in two handles
.... if from a remote host, results in one handle.
The following lsof has:
- 1 local & 1 remote sqlnet, both using TCP
- 1 local sqlnet using bequeath
- 1 local HTTP access
- listener is up
host:/home/pop2 # lsof -T s -i 4TCP -a -u oraclexe
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
oracle 4343 oraclexe 120u IPv4 387830 TCP host.domain.ca:7896->host.domain.ca:ncube-lm (ESTABLISHED)
oracle 4366 oraclexe 15u IPv4 385934 TCP *:exosee (LISTEN)
oracle 4366 oraclexe 16u IPv4 451366 TCP host.domain.ca:http-alt->host.domain.ca:msi-selectplay (ESTABLISHED)
tnslsnr 4457 oraclexe 8u IPv4 386930 TCP *:ncube-lm (LISTEN)
tnslsnr 4457 oraclexe 11u IPv4 387831 TCP host.domain.ca:ncube-lm->host.domain.ca:7896 (ESTABLISHED)
tnslsnr 4457 oraclexe 12u IPv4 387832 TCP *:http-alt (LISTEN)
tnslsnr 4457 oraclexe 13u IPv4 387833 TCP *:amiganetfs (LISTEN)
oracle 14917 oraclexe 14u IPv4 444576 TCP host.domain.ca:ncube-lm->mini.domain.ca:16815 (ESTABLISHED)
sqlplus 15252 oraclexe 8u IPv4 447190 TCP host.domain.ca:15200->host.domain.ca:ncube-lm (ESTABLISHED)
oracle 15257 oraclexe 14u IPv4 447191 TCP host.domain.ca:ncube-lm->host.domain.ca:15200 (ESTABLISHED)

How to identify which process is using PSA?

Hi all,
Does anybody know if there is some way to identify all infopackages in my environment that are using PSA?
Thanks in advance,
Silvio Messias.

Hi Guys, just to thanks you...
I have created this ABAP program... Enjoy...
*& Report ZLIST_OF_IP_THAT_USE_PSA
REPORT zlist_of_ip_that_use_psa.
Data declaration
TABLES: rsldpsel, rsldpio.
TYPES: BEGIN OF ty_rsldpsel,
         logdpid       TYPE rslogdpid,
         objvers       TYPE rsobjvers,
         lnr           TYPE rsnrchar,
         ziel          TYPE rsziel,
         ziel_text(40) TYPE c,
         source        TYPE rsisource,
         logsys        TYPE rsslogsys,
         oltpsource    TYPE rsisource,
       END OF ty_rsldpsel,
       BEGIN OF ty_rsldpio,
         logdpid       TYPE rslogdpid,
         objvers       TYPE rsobjvers,
         source        TYPE rsisource,
         logsys        TYPE rsslogsys,
         oltpsource    TYPE rsisource,
       END OF ty_rsldpio.
DATA: l_is_rsldpsel TYPE STANDARD TABLE OF ty_rsldpsel,
      l_ih_rsldpio TYPE HASHED   TABLE OF ty_rsldpio
                    WITH UNIQUE KEY logdpid objvers.
FIELD-SYMBOLS : <ls_rsldpsel> TYPE ty_rsldpsel,
                <ls_rsldpio> TYPE ty_rsldpio.
RANGES: rg_ziel FOR rsldpsel-ziel.
Processing data...
PARAMETERS : psa_used AS CHECKBOX DEFAULT 'X'.
START-OF-SELECTION.
PERFORM collect_data.
END-OF-SELECTION.
PERFORM display.
*&      Form COLLECT_DATA
      Collecting database information
FORM collect_data.
Valid range of ZIEL
CLEAR: rg_ziel, rg_ziel[].
rg_ziel-sign   = 'I'.
rg_ziel-option = 'EQ'.
rg_ziel-high   = space.
rg_ziel-low    = 1. APPEND rg_ziel.
rg_ziel-low    = 2. APPEND rg_ziel.
rg_ziel-low    = 3. APPEND rg_ziel.
IF psa_used IS INITIAL.
    rg_ziel-low = 4. APPEND rg_ziel.
ENDIF.
Selection all INFOPACKAGES that are using PSA tables
SELECT logdpid objvers lnr ziel
    INTO TABLE l_is_rsldpsel
    FROM rsldpsel
    WHERE objvers EQ 'A'
      AND ziel IN rg_ziel.
IF sy-subrc EQ 0 AND l_is_rsldpsel[] IS NOT INITIAL.
    DELETE ADJACENT DUPLICATES FROM l_is_rsldpsel COMPARING logdpid.
Selecting data from RSLDPIO
    SELECT logdpid objvers source logsys oltpsource
       FROM rsldpio INTO TABLE l_ih_rsldpio
       FOR ALL ENTRIES IN l_is_rsldpsel
       WHERE logdpid EQ l_is_rsldpsel-logdpid
         AND objvers EQ l_is_rsldpsel-objvers.
ENDIF.
LOOP AT l_is_rsldpsel ASSIGNING <ls_rsldpsel>.
    CASE <ls_rsldpsel>-ziel.
      WHEN 1.
        <ls_rsldpsel>-ziel_text = 'Only PSA'.
      WHEN 2.
        <ls_rsldpsel>-ziel_text = 'PSA in parallel mode'.
      WHEN 3.
        <ls_rsldpsel>-ziel_text = 'PSA and after that to Infoprovider'.
      WHEN OTHERS.
        <ls_rsldpsel>-ziel_text = 'Directly to Infoprovider'.
    ENDCASE.
    READ TABLE l_ih_rsldpio ASSIGNING <ls_rsldpio>
    WITH TABLE KEY logdpid = <ls_rsldpsel>-logdpid
                   objvers = <ls_rsldpsel>-objvers.
    IF sy-subrc EQ 0 AND <ls_rsldpio> IS ASSIGNED.
      <ls_rsldpsel>-source     = <ls_rsldpio>-source.
      <ls_rsldpsel>-logsys     = <ls_rsldpio>-logsys.
      <ls_rsldpsel>-oltpsource = <ls_rsldpio>-oltpsource.
    ENDIF.
ENDLOOP.
ENDFORM. " collect_data
*&      Form DISPLAY
      Displaying database information
FORM display .
TYPE-POOLS: slis.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
        gs_layout   TYPE slis_layout_alv.
PERFORM fieldcat_init USING gt_fieldcat[].
PERFORM layout_init USING gs_layout.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = 'Z_DB_ENTRIES_COUNTER'
      is_layout          = gs_layout
      it_fieldcat        = gt_fieldcat[]
    TABLES
      t_outtab           = l_is_rsldpsel.
ENDFORM.                    "DISPLAY
*&      Form fieldcat_init
FORM fieldcat_init USING lt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'LOGDPID'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'InfoPackage (ID)'.
ls_fieldcat-seltext_m    = 'InfoPackage (ID)'.
ls_fieldcat-seltext_s    = 'InfoPackage (ID)'.
ls_fieldcat-reptext_ddic = 'InfoPackage (ID)'.
ls_fieldcat-key          = 'X'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'SOURCE'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'InfoSource'.
ls_fieldcat-seltext_m    = 'InfoSource'.
ls_fieldcat-seltext_s    = 'InfoSource'.
ls_fieldcat-reptext_ddic = 'InfoSource'.
ls_fieldcat-key          = ' '.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'LOGSYS'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'Source System'.
ls_fieldcat-seltext_m    = 'Source System'.
ls_fieldcat-seltext_s    = 'Source System'.
ls_fieldcat-reptext_ddic = 'Source System'.
ls_fieldcat-key          = ' '.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'OLTPSOURCE'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'Datasource'.
ls_fieldcat-seltext_m    = 'OLTPSOURCE'.
ls_fieldcat-seltext_s    = 'OLTPSOURCE'.
ls_fieldcat-reptext_ddic = 'OLTPSOURCE'.
ls_fieldcat-key          = ' '.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'ZIEL_TEXT'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'Type of processing'.
ls_fieldcat-seltext_m    = 'Type of processing'.
ls_fieldcat-seltext_s    = 'Type of processing'.
ls_fieldcat-reptext_ddic = 'Type of processing'.
ls_fieldcat-key          = ' '.
APPEND ls_fieldcat TO lt_fieldcat.
ENDFORM.                    "fieldcat_init
*&      Form layout_init
FORM layout_init USING ls_layout TYPE slis_layout_alv.
ls_layout-zebra             = 'X'.
ls_layout-colwidth_optimize = 'X'.
ENDFORM.                    "layout_i

How to identify a port is used by which application

When I use ServerSocket to listen for request from the client, I got BindException with 'port is in use' message. Is it possible to get the process name which already using the port, if so then I can inform the user, so that he/she can decide whetehr to kill the process or just choose different port number.
Thanks for your help!!!
--KK

hi friend
read this one
Each port is identified by a number from 1 to 65,535. Each port
can be allocated to a particular service.
For example, the HTTP service, which is used by the Web, generally runs on port 80:
we say that a web server listens on port 80 for incoming connections. SMTP or email
servers run on port 25.
Port numbers from 1 to 1023 are reserved for well-known services such as finger, FTP,
HTTP,SMTP etc.
Well Known Port Numbers (0 through 1023)
2. Registered Port Numbers (1024 through 49151)
3. Dynamic Port Numbers (49152 through 65535)
so use port no above 1024, it might solve your problem

Deduplication: how to identify which files are "in-policy" (and which are not)?

Dear experts,
in eventlog I find the following information for one of my deduplicated volumes:
Volume: F: (\\?\Volume{9794e270-fb08-487e-979b-8a08fa9ca311}\)
Error code: 0x0
Error message:
Savings rate: 24
Saved space: 853327714684
Volume used space: 2681869406208
Volume free space: 66771247104
Optimized file count: 1199618
In-policy file count: 1188049
Job processed space (bytes): 0
Job elapsed time (seconds): 2
Job throughput (MB/second): 0
Some things look strange to me:
- The savings rate is only 24% which looks odd because I get about 40% on other file shares with similar characteristics.
- The "Optimized file count" is higher than the "in-policy" file count.
- The volume has about 3.5 million files but only 1.1 million files are "in-policy".
My understanding of "in-policy" files is that all files are in-policy which are older than 3 days (if not configured different, which is not the case) and which are not contained in an excluded folder (nothing configured here) and which have no
excluded file extension (nothing configured here apart from the default). Right?
I'm sure that only a small fraction of the files on this volume are younger than three days, so something seems to be wrong there, but I have no idea how to find the cause of the problem.
Is there any way to identify the files (full path) which are considered to be not "in-policy"?
How can I find out if the optimization process really looks at all files - and doesn't skip a million?
Thanks!
Regards
Christoph

Mandy, thanks for your feedback! I've read these technet articels, but I couldn't learn something really helpfull related to my problem there. To make investigation of the problem easier I did the following:
- created a brand new empty volume (x:) on the same server
- enabled data deduplication on that volume with a minimal file age of 0 days
- copied about 2GB of data from the problem-volume in 15450 files to this new volume
- started "Start-DedupJob x: -Type Optimization -Memory 50"
After a few seconds that job completed and I got the following result:
Volume: X: (\\?\Volume{d1ba9ed8-28f1-44d1-9535-fe603d6a70c6}\)
Error code: 0x0
Error message:
Savings rate: 0
Saved space: 12360718
Volume used space: 3091664896
Volume free space: 7610097664
Optimized file count: 153
In-policy file count: 153
Job processed space (bytes): 46095214
Job elapsed time (seconds): 9
Job throughput (MB/second): 4.88
The question is: why are only 153 files in-policy?
All files (of more than 15000) are of course "older than 0 days", there are no excluded folders configured, there are no excluded extensions configured, no file has one of the default excluded extensions and more than 1000 files are bigger than 100kB
(minimal size for deduplication is 32kB). So what makes only 153 files qualify for deduplication?
My impression is that there are further undocumented requirements which have to be met by a file to qualify for deduplication. But if there's no detailed log of an optimization run available how to find out what's going on?
(Or is something going wrong on my server?)
Kind Regards
Christoph

How to identify which albums are missing from my iTunes

I recently got a new PC with loads of storage so I have been copying mp3's onto it from various old backups and CD's that wouldn't fit on my old laptop.
Is there an automated way of importing the albums that don't already exist in the iTunes library? It would be a mess to import everything then weed out the dupes!

You can put everything into the "Automatically add to iTunes" folder, but there are occasional horror stories about those files going missing. You can also add the entire media folder, but occasionally that can create duplicate entries in the library, particularly if you have split the media folder to a separate location on a drive that isn't permanently connected to your computer.
tt2

How to identify which videos

I took a dozen or so short clips of an event. I know which three I want to combine and edit. But I can't figure out how to identify which they are in imovie in order to put those clips in my project. It shows them all as consecutive clips or frames, without file numbers or names.

I'll try to explain better.
A dozen clips or videos, 1 min to 5 min in length. In one case all along a mountain road.
I want to produce a 5 min project or video with the best parts of 3 of those 12.
All 12 have thumbnails almost identical (the dashboard across the bottom, roof line at the top)
I only want to start editing the 3, not put all 12 in.
How do I identify those 3?

How to identify Which ports are using in RAC setup?

Similar Messages

Maybe you are looking for