How to identify your current mac book pro version
hi,i just want to ask on how to identify your macbook pro if it's the 2008's version or the 2012's version?
To identify the MacBook Pro model you are using, see > http://support.apple.com/kb/ht4132
Similar Messages
-
Does anybody know how I can get my Mac Book Pro back, which was stolen after a class I taught?
I have the store receipt, its serial number, however I had not installed i Cloud on my Mac Book and I'm not able to find my Mac back.
Thanks for helping me!Sorry to say but you are out of luck.
What To Do If Your Mac Is Lost Or Stolen
If you activated Find My Mac before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi. What you cannot do is track your computer using a serial number or other identifying number. You cannot expect Apple or anyone else to find your computer for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty. Be sure to report the loss or theft to the local police. Have the serial number handy. If your Mac is found it cannot be returned to you if you don’t have the serial number and proof of purchase.
Find My Mac can be used from Find My Phone at iCloud.com and via Find My Phone on your iDevice.
The following is third-party anti-theft software:
1. STEM 2.1
2. MacPhoneHome 3.5
3. MacTrack 7.5.0
4. VUWER 1.7
5. Sneaky Bastar* 0.2.0
6. Undercover 5.1.1
7. LoJack for Laptops
8. Hidden 2.0
9. Prey 0.6.2 -
How do I connect my Mac Book Pro to a projector I have the adapter but cant get anything on the screen
Go to your "screen settings". then chose "find screen" then you vill find the prosjector.
this will probably fix your problem.
if this dont works can it be something wrong with your adapter.
hope it helps -
How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.
I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can). -
How can I share my mac book pro with my mac pro.
Hi,
Anyone know how can I share my mac book pro with my mac pro. At the moment I am in NewZealand and my Mac Pro is in UK. I used to share my both computer in UK in same network but I don't know how can I share with different network. Please help me.You can't, currently only the iPhone has the personal hotspot function, it hasn't been enabled on the iPad - whether it will be possible in the future I don't know
-
How do I fix my mac book Pro from running slow?
How do I fix my mac book Pro from running slow?
Why is my computer slow?
Step by Step to fix your Mac -
How can I clean my Mac Book Pro completely to hand it over to an other user ?
How can I clean my Mac Book Pro completely to hand it over to an other user ?
Follow these directions:
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
Ciao, -
How can i restore my mac book pro computer
how can i restore my mac book pro computer??an what am i doing b4 restore my computer??
please remind me all the think i need to do,an i dont want to miss.
thxxxxWelcome to the Apple Support Communities
If you want to erase the disk, reinstall Mac OS X and your Mac didn't come with DVDs or you have OS X Mountain Lion or Lion:
1. Press Command and R keys while your Mac is starting.
2. Open Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
3. Install Mac OS X.
If your Mac came with DVDs:
1. Insert the OS X DVD that came with the Mac and press C key while your Mac is starting.
2. Go to Utilities > Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
3. Install Mac OS X -
how can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.
try this;
open disk utility - verify disk permissions - repair disk permissions if errors are found. might take an hour or less - depending on how much errors needs to be repaired.
restart your macbook and see if that sorts it out for you.
also check your hard drive space. if your hard drive is almost full, that will also contribute to your macbook getting slower....
good luck -
how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?
https://www.youtube.com/watch?v=72l_FLsXNAg
I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac -
HT1661 How can I restart my mac book pro 11 inches when it's on target disc mode
How can I restart my mac book pro 11 inches when it's on target disc mode
Even if you could open Disk Utility you can't reformat a disk while you are booted from it. You will have to use the install CD. Ring the Apple Online Store at the number given at bottom left of this page and give them the serial number of your Mac. You should be able to get the Snow Leopard install disks for a nominal fee.
-
How do i connect my mac book pro to the tv to watch videos?
How can I connect my mac book pro to the HD TV to watch my videos on the TV?
Depending on what model of Macbook Pro you have, you can either wirelessly mirror your computer's monitor (using AirPlay, so an AppleTV is required.) You can also buy and HDMI cable and special adaptor for your Macbook Pro so you can wire your Macbook Pro to your TV via HDMI cable.
http://store.apple.com/us/product/HA824ZM/A/belkin-mini-displayport-to-hdmi-adap ter
This is an example of the adapter you might have to buy. The cable/adapter depends on your Macbook Pro model. -
I clicked on a link in an email that may be spam/phishing. How can I scan my mac book pro for viruses?
You can just download the free ClamXav and scan your entire drive - but as there are no known viruses for OS X (although there is malware - see Thomas Reed's excellent Mac Malware Guide) it's very unlikely that you have a virus.
The best source against malware is OS X itself and common sense. Don't click on links in suspicious emails and be careful of anything that wants to install something on your computer that is not from a reputable source.
Clinton -
How do i get a mac book pro to out of the box
how do i get my mac book pro to out of the box. clear everything off it and start over
Boot with your original system installation DVD: with the disc in the drive, restart the MBP while holding the C key. From the Utilities menu, select Disk Utility. Erase the internal disk.
Quit Disk Utility and install OS X. Install the applications that came with the MBP from the Applications DVD. -
my mac book pro version 10.6.8 screen brightness doesn't increase its just black but can see icons when m 2 close to the screen..how can the problem be solved
Try resetting the SMC http://support.apple.com/kb/ht3964
You can get an idea for repair from these site. Check locally for your area.
https://www.techrestore.com/mac/
http://www.dttservice.com/macbookprounibody.html
http://www.myservice.com/macbookpro.html
http://www.ifixit.com/Device/MacBook_Pro
http://www.PowerbookMedic.com
Maybe you are looking for
-
Tryoing to play QVR. Works on a MAC with version 7. Doesn't work the same using Version 10.
Have some .mov files that work just find on my MAC that has QVR player version 7. When I try these same files on a MAC that was recently updated automatically and has QVR version 10, the .mov doesn't work the same way. Is there a way to set paramete
-
My Windows 7 XP laptop won't update to iTunes 10.7
I just bought the iPhone 5, and in order to sync it with the iTunes on my computer I need to download iTunes version 10.7. However, I get the following error message midway through the process: "There is a problem with this Windows installer package.
-
How to address relative cell in TileList during drag-and-drop processing
Is there a way to address the tile cell being dropped onto during the dragDrop function processing? private function myDragDrop(e:DragEvent):void { // e.whatthe#*&$ <mx:TileList id="tilelist1" rowCount="9" columnCount="9" dragDrop="myDragDrop(event);
-
Oracle version: 11g I am having a problem in UNIX box where my datafile is delimited by "|". The last field is ITM_CMNT declared as VARCHAR2(60) in Oracle. When I have exactly 60bytes in the last field it rejects the record saying actual 61 and max a
-
Every song in itunes library appears twice. how do i delete the dups
in my itunes library every song shows up twice. how do I delete the duplicates?