How to (if possible) change the measfilename variable at runtime

Hello / Hallo (in Deutsch unten)
Is it possible to change the measfilename at runtime? I have two HBM MGC+ which need a pretty long time to initialize. Both are installed in a car. For each measurement we make I must run the DAC scheme make the measurements an stop it. Then ich change the filename for the data and we make the next measurements. This takes a lot of time.
I want to start run the DAC scheme for only one time and let it run. Then I want to trigger the measurements with buttons setting triggerconditions in the DAC scheme. To trigger the recording of the data is not the problem but how can I change the measfilename variable at runtime so that each new measurement is saved in a new file?
The example with the GenFileName function is interesting but not the solution for my problem...
has anyone an idea?
Thanks a lot.
Sebastian
DEUTSCH:
Hallo,
kennt einer eine Möglichkeit die Variable MeasFileName bei laufender Messung zu verändern? Ich möchte die Messung starten... das Abspeichern geschieht über Triggerbedingungen die von Button im DAC Plan während der Messung gesteuert werden. Ziel wäre für jede neu getriggerte Messung je eine neue Datei mit einem neuen (in der Laufzeit eingebbaren) Dateinamen anzulegen.
Hat das oder ähnliches schonmal einer gemacht und kann sachdienliche Hinweise abgeben ?
Danke schonmal.
Grüße Sebastian

Hallo,
ich habe noch ein wenig herumprobiert aber es klappt nicht so richtig. Ich habe noch folgendes versucht: Daten ins Datenportal ablegen und immer nach Ende einer einzelnen Messung per Button eine Autosequenz aufrufen die die Daten in eine Datei schreibt (Dateiname über Dialogfeld eingebbar). Das klappt auch... nur wenn ich dann in der Autoseq. den Datenbereich komplett lösche (DATADELALL) und eine neue Messsequenz starten will stürzt das Messprog. mit Runtimeerror ab. Irgendwie kommt der vermutlich nicht klar damit, dass der Messwertzähler während der Laufzeit wieder auf 0 gesetzt werden muss.
Eine fortlaufende Speicherung mit anschließender Sortierung wollte ich auch schon machen aber bei fast 200 Messkanälen mit 800Hz häufen sich einfach soviele Daten an, dass die Messdatei riesig werden würde.
Grüße Sebastian

Similar Messages

OBIEE 10 - Is Possible change the Presentation Variable without GO BUTTON ?

OBIEE 10:
Is Possible change the Presentation Variable only changing the Value on the prompt ??
Or the presentation variable only change if click on "GO BUTTON" ????
Thanks.

You need to click the "Go" button. That is what sets the variable.

I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

Remember security on a TC is an illusion.
Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
Remember this the next time because anybody at all can change your passwords.
Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
Voila .. all your passwords in plain sight to any Tom Dick and Fred.

How to change the text variables for a standard report-writer report ?

I am trying to change the text variables for a report -writer report and transport the same so as to change the title page and the report output heading .I know the Report-Group 6Z02 and the library 6O1 to which it belongs.I tried using the change transaction GR32 after going to the area menu through FGRP . I try to change the text variables through but it throws an error "You chose a name in the reserved name range - try different name ".
I have also tried copying this report into another report and changing the new report . I was able to change and save the text variables . Now when I try to overwrite the original report 6Z02-001 with this new report , it does not allow that.
Let me know how I can change the text variables for the same

Can anyone please suggest me what to do here ?

How to change the characterstic variable

Hi Friends,
I have to change the characterstic variable Variable Represents = u201CSelection Option to interval option.
Can any body help me in this regard
Thanks
Kiran

Unfortunately Rakesh is right. you cant change this property once the variable is created. You will need to create a new one.
best regards,
Jerome

How to change the outbound variable?

Hi..
we are trying to change the outbound variable tag <http:http-response-code>, we tried with replace activity it was not working as what we expected.
By default we are getting the following value "<http:http-response-code>200</http:http-response-code>" we are trying to change it from "200" to some other value.
Thanks.

Hi..
Thanks for ur reply..
Replace node contents of ./ctx:transport/ctx:response/http:http-response-code in inbound variable with "202"
we tried insert also Insert
<http:http-response-code>202</http:http-response-code> as last child of ./ctx:transport/ctx:response in inbound variable.
Its not working
Thanks

How do I programaticly change the header BG color on a multiline listbox

How do I programaticly change the header BG color on a multiline listbox

Hi,
If you mean the multicolumn listbox then you have to create the its property node on the diagram (right click on the item and select "Create->property node" from pop-up menu). Then you have to select two properties:
"Active Cell"
"Cell Background color".
You can do it by expanding prperty node to 2 rows and right clicking on each row. Then select "Properties" from pop-up menu and the appropriate property.
Then you have to set-up "active cell" to the appropriate coordinates of the column header. (row=-1; column=N or column=-2 if you want to change the colors of all headers).
Now you have to connect the appropriate colorbox or numeric variable to "Cell Background color" property node and run the program.
I've attached the example.
Good luck/
Ole
g Chutko.
Attachments:
Color.vi ‏15 KB

Change the environment variables for sid adm failed

Hi Experts,
I have installed ECC HA on AIX/ORACLE
now i want to change the environment variables for the qr1adm user at the standby node
i tried to change the /home/qr1adm/.profile with command
vi /home/qr1adm/.profile it is changed and i saved this changes.
now I login with qr1adm user and i executed this command
env |more
it comes with the old values
i don't know why?
and if i oppened the .profile file i'm finding the new values
So could you please tell me how can i change the environment variable for qr1adm user
Thanks
Sherif
Edited by: Sherif Eid on Jan 23, 2008 9:08 AM

Thanks Sridhar ,
which hostname?
for example i have
.dbenv_R3QASsvc.csh
.sapenv_KFGKWERPR303.csh
i want to tell you that R3QASsvc is the virtual hostname
and KFGKWERPR303 is the name of the primary node A
and the phiscal host name of node B is KFGKWERPR307
so which one should i change it?
thanks
Sherif
Edited by: Sherif Eid on Jan 23, 2008 11:59 AM

How/where do I change the AppleID associated with my computer?

How/where do I change the AppleID associated with my computer?

What do you mean by "change the Apple ID"? Are you trying to get a new ID from the one you currently have or just add a new ID to the computer?

How much is to change the ipod touch 5 screen at a London authorized apple store or technical support?, how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?

how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?, how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?

Big thank you, KP.
I will try it out Though I did try something similar before I posted to you ... and was unsuccessful

How do I programatically change the text in a listbox that is contained in a cluster?

How do I programatically change the text in a listbox that is contained in a cluster?

In the front panel, right click on the listbox object and select create>attribute node.
In the diagram click on the attribute node and select "Item Names".
Connect the desired array of string to the attribute node.
BigBen

How can I manually change the height of the "Type ...

Hi all
Just got automatically installed the latest 6.22 version of skype few minutes ago and I got a few questions.
First and foremost, how can I MANUALLY change the height of the textbox, where I type the messages. I would like to make it larger, like in the previous versions of skype. I don't want to move my mouse cursor through the entire monitor to reach this tiny textbox.
And second, why you guys are trying constanly to ruin something that is working perfectly ? Going to revert to the previous version until you fix all these nuisances.
Regards

There is no way to do this, it is designed to be strictly landscape with keyboard, portrait without - not the best thought-out phone on the market, mainly geared towards compulsive texters and e-mailers.
There's no way to know whetherNokia will change this with any future updates, perhaps you should make the recommendation to them directly using the 'contact us' link.

How to make use of the presentation variable in SQL result query

I have 2 prompts in my dashboard.
Prompt1 decides the values of Prompt2.
I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
the query is resulting into
SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
but the value in selected_comp is "ABC".
Can anybody help in how to make use of the presentation variable in query to get the correct value
thanks
Shubha

Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
Thanks,
Venkat
http://oraclebizint.wordpress.com

Once i scan a document and create a pdf. how do i then change the fields on the document

once i scan a document and create a pdf. how do i then change the the info on the document. i have to update a couple of the columns and cannot figure out how. please help.

You are probably only looking at a graphic. You have to run OCR before you can do the corrections. For your use, you would need the ClearScan option. Once you have a text based document, you can then use the Text Touchup Tool. Expect to have problems. Editing a PDF is not easy to do well and is not really recommended, except for minor edits. Wordwrap and such features are not part of the editing options. It would be best if you could get an electronic copy of the original, edit that, then create a new PDF.

How can you add/change the currency rate in spro?

Hi all,
you can add a new currency code by going to spro --- general settings --- check currency codes
for example: PERU ---> PEN
But, how can we add/change the currency rate PEN in spro?
for example: Peruvian Nuevo Sol = 4,3567619
Is it still in customizing? And if so, where can i find it?
Many thanks in advance.
Kind regards,
Pamela.

Hi Aman,
I have entered the field to add the new currency rate.
But the system doesn't want to valid my new rate.
I get the following error message:
"Input should be in the form ._,____ "
Do you know how to override that command?
Thanks.
Regards,
Pamela

How to (if possible) change the measfilename variable at runtime

Similar Messages

Maybe you are looking for