How to implement app. with language link (1 source 2 xlf file)

Dear firends,
I know about translation steps, but It covers two different apps.
I would like to implement one apps with language options?
how do I implement it?
regards
siyavuş
Edited by: sak on Feb 11, 2010 11:10 AM

Hi Mr jianqu,
Because of our customer now has 2 main central offices, and all other sub branches are now connected to each of these main central office via one primary full-meshed MPLS VPN of 1st Service Provider, so If I use the float static routes, and when there is a failure at one link at a CENTRAL CE Router to primary link to primary MPLS VPN Service Provider, but still there is no failure at the other site from a router CE sub branch with the the PE of the primary full-meshed MPLS VPN Layer 3 Service Provider,so It cannot cause a failover to a second redundant link of the 2nd Service Provider?
So with our system, do we only have one solution like this:
-Configure BGP as the routing protocol between the CE and the PE routers.
-Use local preference and Multi Exit Discriminator (MED) when running BGP inside a our customer VPN to select the primary and backup links.
-Use AS-override feature to support overlapping AS numbers between customer sites

Similar Messages

How to implement classes with alv's

hi
how to implement classes with alv's

Hi Jyotsna,
check this example codes.
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP] = T_CDPOS[.
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP] = T_EKKO[.
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP] = T_DATAELE[.
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
REPORT YMS_HIERSEQLISTDISPLAY .
Program with FM REUSE_ALV_HIERSEQ_LIST_DISPLAY *
Author : Michel PIOUD *
Email : mpioudyahoo.fr HomePage : http://www.geocities.com/mpioud *
TYPE-POOLS: slis. " ALV Global types
CONSTANTS :
c_x VALUE 'X',
c_gt_vbap TYPE SLIS_TABNAME VALUE 'GT_VBAP',
c_gt_vbak TYPE SLIS_TABNAME VALUE 'GT_VBAK'.
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max. "#EC NEEDED
PARAMETERS p_max(02) TYPE n DEFAULT '10' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_2 FOR FIELD p_expand. "#EC NEEDED
PARAMETERS p_expand AS CHECKBOX DEFAULT c_x.
SELECTION-SCREEN END OF LINE.
TYPES :
1st Table
BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln, " Sales document
kunnr TYPE vbak-kunnr, " Sold-to party
netwr TYPE vbak-netwr, " Net Value of the Sales Order
erdat TYPE vbak-erdat, " Creation date
waerk TYPE vbak-waerk, " SD document currency
expand TYPE xfeld,
END OF ty_vbak,
2nd Table
BEGIN OF ty_vbap,
vbeln TYPE vbap-vbeln, " Sales document
posnr TYPE vbap-posnr, " Sales document
matnr TYPE vbap-matnr, " Material number
netwr TYPE vbap-netwr, " Net Value of the Sales Order
waerk TYPE vbap-waerk, " SD document currency
END OF ty_vbap.
DATA :
1st Table
gt_vbak TYPE TABLE OF ty_vbak,
2nd Table
gt_vbap TYPE TABLE OF ty_vbap.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
v_2 = 'With ''EXPAND'' field'.
START-OF-SELECTION.
Read Sales Document: Header Data
SELECT vbeln kunnr netwr waerk erdat
FROM vbak
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_vbak.
IF NOT gt_vbak[] IS INITIAL.
Read Sales Document: Item Data
SELECT vbeln posnr matnr netwr waerk
FROM vbap
INTO CORRESPONDING FIELDS OF TABLE gt_vbap
FOR ALL ENTRIES IN gt_vbak
WHERE vbeln = gt_vbak-vbeln.
ENDIF.
PERFORM f_display.
Form F_DISPLAY
FORM f_display.
Macro definition
DEFINE m_fieldcat.
ls_fieldcat-tabname = &1.
ls_fieldcat-fieldname = &2.
ls_fieldcat-ref_tabname = &3.
ls_fieldcat-cfieldname = &4. " Field with currency unit
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
ls_sort-tabname = &1.
ls_sort-fieldname = &2.
ls_sort-up = c_x.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_layout TYPE slis_layout_alv,
ls_keyinfo TYPE slis_keyinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
lt_sort TYPE slis_t_sortinfo_alv," Sort table
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv." Field catalog
ls_layout-group_change_edit = c_x.
ls_layout-colwidth_optimize = c_x.
ls_layout-zebra = c_x.
ls_layout-detail_popup = c_x.
ls_layout-get_selinfos = c_x.
IF p_expand = c_x.
ls_layout-expand_fieldname = 'EXPAND'.
ENDIF.
Build field catalog and sort table
m_fieldcat c_gt_vbak 'VBELN' 'VBAK' ''.
m_fieldcat c_gt_vbak 'KUNNR' 'VBAK' ''.
m_fieldcat c_gt_vbak 'NETWR' 'VBAK' 'WAERK'.
m_fieldcat c_gt_vbak 'WAERK' 'VBAK' ''.
m_fieldcat c_gt_vbak 'ERDAT' 'VBAK' ''.
m_fieldcat c_gt_vbap 'POSNR' 'VBAP' ''.
m_fieldcat c_gt_vbap 'MATNR' 'VBAP' ''.
m_fieldcat c_gt_vbap 'NETWR' 'VBAP' 'WAERK'.
m_fieldcat c_gt_vbap 'WAERK' 'VBAP' ''.
m_sort c_gt_vbak 'KUNNR'.
m_sort c_gt_vbap 'NETWR'.
ls_keyinfo-header01 = 'VBELN'.
ls_keyinfo-item01 = 'VBELN'.
ls_keyinfo-item02 = 'POSNR'.
Dipslay Hierarchical list
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
i_tabname_header = c_gt_vbak
i_tabname_item = c_gt_vbap
is_keyinfo = ls_keyinfo
TABLES
t_outtab_header = gt_vbak
t_outtab_item = gt_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_LIST_DISPLAY
Form USER_COMMAND *
FORM user_command USING i_ucomm TYPE sy-ucomm
is_selfield TYPE slis_selfield. "#EC CALLED
DATA ls_vbak TYPE ty_vbak.
CASE i_ucomm.
WHEN '&IC1'. " Pick
CASE is_selfield-tabname.
WHEN c_gt_vbap.
WHEN c_gt_vbak.
READ TABLE gt_vbak INDEX is_selfield-tabindex INTO ls_vbak.
IF sy-subrc EQ 0.
Sales order number
SET PARAMETER ID 'AUN' FIELD ls_vbak-vbeln.
Display Sales Order
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. " USER_COMMAND
Kindly Reward Points If You Found The Reply Helpful,
Cheers,
Chaitanya.

How to Implement SSL with Oracle Applications R12 without using Load Balanc

How to Implement SSL with Oracle Applications R12.1.3 without using Load Balancer

Please refer to (Enabling SSL in Release 12 [ID 376700.1]).
Thanks,
Hussein

How configure mail.app with webmail, exchange 2003?

Hi,
I would like to configure mail.app with webmail, exchange 2003.
I have certified file of this serverver, and the webmail used https and port 443,listener port.
And webmail address is https://webmail.abc.com/exchange.
How configure mail.app with webmail?
Best regard and I'm pleased to thank you for you kind support in advance.
nautiluzth

For the best Mac compatibility with Exchange, I suggest you use Microsoft Entourage, part of Microsoft Office.

How do I convert an audio link into a wav file?

how do I convert an audio link into a wav file with my Imac?
A PC user showed me to right click an audio link where it asked if it wanted to save the link as a Wav file?
I saw this done in front of me. How do I do it with my Mac ?

This is how to do it in itunes http://support.apple.com/kb/ht1550
If I view the song in finder, all that i have to do is press command-i and it opens a window. In the section where you view the name and extension I took off the extension (.mp3 in my case) and replaced it with .wav

How can i handle with event, when i close a file (notped or word,excel..)??

How can i handle with event, when i close a file (notped or excel...). i want do something..
Edited by: Legy on Apr 21, 2008 11:45 PM

of course notepad.exe is closed again as soon as the operating system has completed the process of loading its content into memory...
And no "event" is fired when that happens, except maybe internal to the process that loaded the application to indicate that it's been loaded successfully and can now be executed.
But there's no way your Java process is ever going to receive that notification.

How to implement redundant with 1 CE router to 2 MPLS service providers

Dear all,
Our head-office are currently have 1 Cisco CPE 3825 router with 2 WAN connections to our branches. We are now using static routing protocol in our network infrastructure, we consider how to implement the redundancy for networks by the redundant circuits connection to 2 MPLS providers, only when the primary connection to the primary MPLS L3 provider fail, the backup link to the second MPLS Layer 2 provider automatically active. Anybody knows where can I find information, tips or examples, how we'd handle the routing for that?
We are now have:
1 G0/1 interface connect to primary MPLS L3 Provider (the 2nd G0/2 interface is a leased-line connection to our partner, and we not consider here)
1 HWIC (layer 2) card, with 4 ports, which has interface F0/2/3 connected to the backup MPLS Layer 2 provider.
Thanks in advance.
PS: Current configuration : 3727 bytes
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Router
boot-start-marker
boot system flash c3825-entservicesk9-mz.123-11.T7.bin
boot-end-marker
logging buffered 4096 debugging
logging monitor xml
no aaa new-model
ip subnet-zero
ip cef
no ftp-server write-enable
no spanning-tree vlan 4
no spanning-tree vlan 5
interface GigabitEthernet0/1
description connect to VDC MPLS$ETH-WAN$
mtu 1480
ip address 222.x.x.66 255.255.255.252
ip flow ingress
ip flow egress
service-policy output SDM-QoS-Policy-1
ip route-cache flow
duplex auto
speed auto
media-type rj45
fair-queue 64 256 256
no cdp enable
interface FastEthernet0/2/0
switchport access vlan 2
no cdp enable
interface FastEthernet0/2/3
description ToTBToverFPT
switchport access vlan 5
no cdp enable
interface Vlan2
description CONNECT TO MPLS_VDC
ip address 192.168.201.9 255.255.248.0
interface Vlan5
description Connect to HoChiMinhCity
ip address 172.16.1.5 255.255.255.252
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 172.16.244.0 255.255.255.0 222.255.33.65
ip route 192.168.0.0 255.255.248.0 222.255.33.65
ip route 192.168.24.0 255.255.254.0 222.255.33.65
ip route 192.168.30.0 255.255.254.0 222.255.33.65
ip route 192.168.32.0 255.255.254.0 222.255.33.65
ip route 222.x.x.68 255.255.255.252 222.255.33.65
ip route 222.255.33.72 255.255.255.252 222.255.33.65
ip route 222.x.x.196 255.255.255.252 222.255.33.65
ip route 222.x.x.200 255.255.255.252 222.255.33.65
ip http server
ip http authentication local
no ip http secure-server
ip http max-connections 3
control-plane
line con 0
logging synchronous
stopbits 1
line aux 0
stopbits 1
line vty 0 4
password
login
transport input telnet
line vty 5 14
privilege level 15
password
login
transport input telnet
line vty 15
privilege level 15
password
login
transport input telnet
parser view SDM_Monitor
scheduler allocate 20000 1000
end

Hi Mr jianqu,
Because of our customer now has 2 main central offices, and all other sub branches are now connected to each of these main central office via one primary full-meshed MPLS VPN of 1st Service Provider, so If I use the float static routes, and when there is a failure at one link at a CENTRAL CE Router to primary link to primary MPLS VPN Service Provider, but still there is no failure at the other site from a router CE sub branch with the the PE of the primary full-meshed MPLS VPN Layer 3 Service Provider,so It cannot cause a failover to a second redundant link of the 2nd Service Provider?
So with our system, do we only have one solution like this:
-Configure BGP as the routing protocol between the CE and the PE routers.
-Use local preference and Multi Exit Discriminator (MED) when running BGP inside a our customer VPN to select the primary and backup links.
-Use AS-override feature to support overlapping AS numbers between customer sites

IOS 5 Install Instructions (How to restore apps with progress, how to install on a computer you don't normally sync with, etc.)

This isn't really a question, but that doesn't matter, right?
First of all, you know how to upgrade, right? Install the new version of iTunes, plug in your iDevice, click on it on the sidebar, and click Update.
PRECAUTION: You should sync first, but it's not required at all, especially if you CAN'T sync because you're updating on a secondary computer. iTunes will create a backup for you during the update process.
If you are updating on a computer that you normally sync with...
Just click Download and Update!
If you AREN'T updating on a computer that you normally sync with...
You'll get a message that says it will erase everything on your iDevice.
Who cares? Just update!
Estimated download times:
Download Time: 30 Minutes
Backup Time: (Around 30 GB of data) 1.5 Hours (DON'T SKIP THIS STEP!)
Update Time: 10 Minutes
After the long wait, and something on your iDevice shows up about setting up a new device, jump right in and answer the 5-10 questions or so!
Then, you'll see your new iOS 5 iDevice for the first time.
WAIT, ALL OF THE APPS, MUSIC, and MORE are gone!
NO NEED TO PANIC!
This is normal, and WILL happen in 90-95 percent of users! There is a way to stop this from happening, but don't go that route... It takes DAYS to do... There are two ways to restore all of your apps, WITH THEIR PROGRESS TOO! (Angry Birds time!) Apple will NOT charge you for redownloading!
1. Just go into the App Store on your device, go into updates, and click the new purchased bar. From there, click the little cloud next to all the apps you need to download. They will redownload with their progress!
2. Or, you can go into iTunes, (Purchased tab), and from there redownload all of your apps.
This WILL happen whether or not you do this update on a computer you normally sync with or not. I did this update on a computer I don't normally sync with and it worked perfectly!
I waited four days researching what will happen if I update on a computer that I don't normally sync with, but with no avail, so I decided to bite the bullet, and this worked perfectly! Time to work on Angry Birds! iOS 5 is worth the 3 hour wait!
Any questions, feel free to ask!

This is not working for me. I synced to my computer first, then I did the upgrade on my iphone 4. Once the upgrade completed, my phone got an apple symbol with a line under it, and it is just frozen. I tried to sync back to my computer 3 times, and each time, it stops on step 3/4 for the sync. Under the apps, it says something like 'searching for apps to load.' It freezes there for hours. I waited 7 hours the first time, woke up, did it again and 11 hours later, come home from work, stuck on the same screen again. I restarted itunes, and it will not even let me press the sync button. It is like the sync button is already clicked, and it says - 'loading device.' It has been stuck on that for hours.
I am so disappointed with this 'update.' My phone worked fine yesterday. Can somebody tell me what to do to get my phone to work again? I do not even care if I keep the update or not. I just want a working phone. Just to be clear, I lost EVERYTHING. I lost the ability to even turn my phone on, and apparently, my computer lost the ability to 'read' my phone. I can see all of the info on my computer, but my phone will not power on, and the computer will not sync my phone to the info that is stored.

How to supply events with url links in a public readable event calendar?

When creating a new event on this calendar, how do I supply a url with
hypertext links so reader can click on it and lead to a 'more info' page?
I tried the example supplied by "Reviewer's Guide, iPlanet Calendar Server
5.0". From chapter 4, Advanced Features, I imported a supplied ical file
(ba_music.ics) to JSmith's BayAreaMusic calendar, I got no problem when
importing. Then, when I looked at the calendar, I expected to see hyperlinks,
yet what I saw were only plain text html, no links, no images( such as -
<html>
<a target=ics2 href=http://www.sfsymphony.org/>
<img src=imf/greynte2.gif align=left width=27 height=28>Symphony Concert<br>
8:00pm
</html>
What did I do wrong?
Ching-I

When creating a new event on this calendar, how do I supply a url with
hypertext links so reader can click on it and lead to a 'more info' page?
I tried the example supplied by "Reviewer's Guide, iPlanet Calendar Server
5.0". From chapter 4, Advanced Features, I imported a supplied ical file
(ba_music.ics) to JSmith's BayAreaMusic calendar, I got no problem when
importing. Then, when I looked at the calendar, I expected to see hyperlinks,
yet what I saw were only plain text html, no links, no images( such as -
<html>
<a target=ics2 href=http://www.sfsymphony.org/>
<img src=imf/greynte2.gif align=left width=27 height=28>Symphony Concert<br>
8:00pm
</html>
What did I do wrong?
Ching-I

How to implement Table with Common Cell Section

Hi,
I have requirement of displaying mulltiple rows in single column cell for certain columns in each row of Table.
This has to be a read only table, with alternate design support in 7.02
The Data Source contains all the elements to display in table as seperate columns (Data1..Data7).
I have checked at Grouped Column design, its bit different from grouped column.
Header1     | Header2 | Header 3 | Header 5 | Header 7
                                 | Header 4 | Header 6 |
Row-Data1 |     Data 2 | Data3      | Data 5     | Data 7
                                 | Data4      | Data 6    |
Row-Data2 |    Data22 | Data33     | Data55    | Data77
                                    Data 44   | Data 66 |
Please let me know, if you have any idea of achieving this form of table in WD Java..

Hi,
I don't know how to do this with WD Java Table UI element, and you could build simple html table using webwidget UI element but that is not available on 702 as far as I know, plus this case the filtering, sorting and other features have to be done also manually using your own algorithm.
Here is what I just built on 730 using WebWidgets:
I checked also the grouped column, but that worked only for the header of the column, and behaved like colspan, while what you need is probably rather like rowspan.
I know it is not a big help, maybe someone else knows how to do this with Table UI (if it is even possible).
Still, perhaps someone else is interested who is using a higher release like 730.
I created a webwidget UI element and bound to its "html" property a string context element that I called "widgethtml".
After this I added this code to the wdDoModifyView() hook method:
StringBuilder sb = new StringBuilder();
sb.append("<html><head>")
.append("<style type=\"text/css\">")
.append(".AlternateTable{width:100%; border-collapse:collapse;}")
.append(".AlternateTable td ,th{padding:7px; border:black 1px solid;}")
.append(".AlternateTable tr:nth-child(n){ background: #9BBB58;}")
.append(".AlternateTable tr:nth-child(n+3){ background: #E9EEF4;}")
.append(".AlternateTable tr:nth-child(n+5){ background: #558ED5;}")
.append("</style>")
.append("</head>")
.append("<body>")
.append("<table class=\"AlternateTable\">")
.append("<tr>")
.append("<th rowspan=\"2\">Header1</th>")
.append("<th rowspan=\"2\">Header2</th>")
.append("<th>Header3</th>")
.append("<th rowspan=\"2\">Header5</th>")
.append("</tr>")
.append("<tr>")
.append("<th>Header4</th>")
.append("</tr>")
.append("<tr>")
.append("<td rowspan=\"2\">Data1</td>")
.append("<td rowspan=\"2\">Data2</td>")
.append("<td>Data3</td>")
.append("<td rowspan=\"2\">Data5</td>")
.append("</tr>")
.append("<tr>")
.append("<td>Data4</td>")
.append("</tr>")
.append("<tr>")
.append("<td rowspan=\"2\">Data11</td>")
.append("<td rowspan=\"2\">Data22</td>")
.append("<td>Data33</td>")
.append("<td rowspan=\"2\">Data55</td>")
.append("</tr>")
.append("<tr>")
.append("<td>Data44</td>")
.append("</tr>")
.append("</table>")
.append("</body></html>");
wdContext.currentContextElement().setWidgethtml(sb.toString());
Cheers,
Ervin

How to download apps with internet download managers

i need to download my payed apps with an idm because with internet download manager my speed doubles up but with itunes i have problems of low speed and long time to download apps ?

I agree that this is silly, I'm with 3UK and get completely unlimited data on my Tariff.
It's a pain having to find a WiFi point just to download an app. Especially when sometimes, my 3G is faster than some public WiFi points
Another silly thing is the fact that when I'm out with a Mate, I can tether to his iPhone and download apps via WiFi over his 3G connection
WiFi/3G dongles also work. But that's beside the point
Maybe if they gave you a warning before downloading.
ie. "This application exceeds 50MB. do you wish to download using your dataplan or later via WiFi"

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

Excel files with fields linked to other excel files take a long time to open from SharePoint library

Trying to track a problem for a user.
Most of the documents opened from our SharePoint libraries appear to open in a timely fashion.
But...one user has noticed an issue, and I just noticed something with her files that are a little less common than other stuff we've seen.
she has a lot of pricelist excel files. there are some master price list files, and then other files that link to fields from within the master files.
the files that contain links to other files appear to be the ones that open very slowly.
the files are being opened via excel itself, not the owa viewer or editor.
is there a trick to setting up either the library, the site, site collection or web app... or some client-side setting that affects how quickly/efficiently excel will open files that link to other excel files shared within sharepoint?

Hi carphuntin_god,
According to your description, my understanding is that when you click a hyperlink which redirect to other files , the file are opened very slowly via excel client.
How about you download the same file and open it using excel client? If it is opened quite fast, the issue should be caused by some third-party add-ins in the office program or antivirus soft.
Here is a similar thread you can have a look:
http://social.technet.microsoft.com/Forums/en-US/ff0c5306-5300-4010-a760-c4cca320b6fc/excell-file-taking-long-time-to-open-and-edit?forum=officesetupdeploylegacy
http://social.technet.microsoft.com/Forums/en-US/5c746958-418a-44f6-a777-9f8bddf6dbb6/sharepoint-file-open-takes-long-time?forum=sharepointdevelopmentlegacy
If you want to open the files using excel service after click the link in the excel file, you can create the hyperlink in the following way:
General Syntax:
http://<server_name>/<site_name>/_layouts/ xlviewer.aspx?id=<workbook path>&range=<location>
For example:
http://CorpServer/DeptA89/_layouts/ xlviewer.aspx?id=http://Mfct/Stats/Shared%20Documents/Parts.xlsx&range=Widgets!A1:F25
For more information:
http://office.microsoft.com/en-001/sharepoint-server-help/using-hyperlinks-in-excel-services-HA010173679.aspx
If you want to open the files using Office Web Apps after click the link in the excel file, you can create the hyperlink in the following way:
http://<server name> / <site name> / <library name>/<your file name> ?web=1
For example:
http://sp/Shared%20Documents/exceltest.xlsx?Web=1
Best Regards,
Eric
Eric Tao
TechNet Community Support

How can you deny bash system access when sourcing a file?

I'm having another one of my "Linux noob" moments. This is probably easy to answer for the experienced bashers here.
I need a bash function to extract data from a PKGBUILD for use in other scripts. I want to write it in such a way that there is no significant risk when checking PKGBUILDs from possibly untrusted sources. It would be unreasonable to request the user to manually inspect every PKGBUILD when only extracting information (i.e. not building the package) and when dealing with many PKGBUILDs.
The function itself is very simple in the unsafe version:
for ARG in $@; do
source "$ARG"
echo "$pkgname $pkgver $pkgrel"
done
The reason that I want to source the file is to catch variable changes within the script (obviously missing the build function, but there are some that change outside of it). Parsing the file externally is likely to miss some changes.
How can I safely source the PKGBUILD? Ideally I want to completely limit access to the system, specifically the users home directory. Is there a way to do this as a user without write permissions? Is this what the "nobody" user is for?
I've considered using chroot but that appears to need root privileges. I want to avoid sudo.
Thanks.
Last edited by Xyne (2009-05-19 11:09:25)

Well, unsetting the PATH seems a good idea, but what if the pkgbuild contains sth like this:
pkgver=$(uname -r)
or any similar manner of dynamically generating one of the variables Xyne's interested in by using a command in a subshell? While the following works (i.e. fails as it should):
~$> OLDPATH=$PATH;export PATH="";/bin/bash -r -c 'foo=$(rm foo);foo=$(/bin/rm foo)';export PATH=$OLDPATH
/bin/bash: rm: No such file or directory
/bin/bash: /bin/rm: restricted: cannot specify `/' in command names
any legitimate use of command substitution will fail as well. Not to mention redirection, which is disabled in a restricted shell as well.
And yes, disabling (possibly) malicious bash builtins may be done as well, but it will fail as well if they are used in a legitimate way.
Using "nobody" also relies on the assumption that the user's files aren't world-writable. I think the only safe solution is using a chroot after all, but maybe I'm missing something here.

How to keep HTML code in the applet source (.java) file itself?

Hi,
How to keep HTML code (APPLET tag) in the applet source (.java) file itself?
Please give an example?
thank you,

R6i wrote:
...What I mean is without writing external HTML file, how to run an applet (during practice)?'Practice'? What does that mean? During development? If that is what you are referring to, add an applet tag at the top of YourApplet.java inside a Java comment area. Then AppletViewer (in recent SDKs) can then run it with just..
prompt:javac YourApplet.java
prompt:// the '.java' extension is not a mistake
prompt:appletviewer YourApplet.javaIf you do not mean 'during development', then that brings us back to +"What advantages do you see that is bringing to the end user?".+

How to implement app. with language link (1 source 2 xlf file)

Similar Messages

Maybe you are looking for