How to implement more than one AP in a LAN

Hi
If I take two basic LinkSys access points, and want to set it up in my LAN, what extra configuration do I have to do than configuring only one AP in my LAN?
I'm talking about minimum configuration. So, if I take only one LinkSys AP, I would configure:
1) IP address to the device
2) Enable DHCP (we'll assume that I need DHCP to assign IPs to hosts)
3) I will configure SSID
I will not enable any security even data encryption.
So if I'm to add another AP, because for certain areas in my office I don't get a good signale from AP1, what should I do?
Anyway help would be highly appreciated.
Thanks in advance!

Actually you need to consider a couple of things:
Are both these AP's going to overlap in wireless signal? If the answer is yes then you need to make sure they are both on seperate channels, for instance put AP1 on channel 1 AP2 on channel 6. Next make sure you set up DHCP so it wont dish out the same range on both AP's. On AP1 setup DHCP for 192.168.1.1 through 192.168.1.125 on AP2 setup DHCP for 192.168.1.126 through 192.168.1.254, this way you wont get any ip conflicts.
I am assuming the switchport they are plugged in to will both be on the same VLAN, this is a must.

Similar Messages

How to implement more than one physical models from the same model

Hello,
We have designed a relational model for our application and now, we would like to implement it for our 4 environments: Development, Test, User-Test and Real. Each one has the same logical schema but, different physical clauses (i.e.: in development environment we will not use partitioning clauses).
Is this possible?
Thank you,
Bernat Fabregat

Hello Bernat,
yes it's possible:
1) open your design and go to Tools>"RDBMS site administration"
2) add your sites there (Current design) - Development, Test, User-Test and Real; press ok when finish
3) go to "Physical models" node in browser and use "new" from pop-up menu - your sites will appear in list
4) after you set physical objects in one model (need to save it as well)l, you can clone those objects in other models - you can clone from lower or the same database version
You can consider usage of "name substitution" functionality during DDL generation if objects should have different name (prefix) in different environment - in this there will be no need to change the name of objects in models.
Philip

How to transfer more than one files over internet at once?

hi, friends,
I just wonder how to transfer more than one files from one computer to another over internet at once. Not using ftp. pls any one give me the solution.

This isn't hard to do, but it depends on your exact need. I did something very similar to let me upload all my mp3 file from home to work using sockets (don't have the code anymore..).
What I did was implement a "pull" approach rather than a "push" approach. In other words, everytime my server got a request from a client, it served up the next file. It didn't know or care that the client was always the same.
If you can set up a server to serve one file when a client attaches, then basically just put that code in a loop.
If this doesn't meet you need, it might still be helpful as a starting point...

How to show more than one record at a form-like style report?

Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank u

Hi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer

Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

Dear All
Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
Many thanks

Click here for options.
(69081)

How to select more than one slide on Keynote?

Please, someone knows how to select more than one slide on keynote for IPad?

// Allow selection to span one contiguous set of rows, visible columns, or block of cells
table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
// Allow multiple selections of rows, visible columns, or cell blocks
table.setSelectionMode(ListSelectionModel.MULTIPLE_INTERVAL_SELECTION);

How to display more than one documents on windows 8 desktop?

how to display more than one documents on windows 8 desktop?

Adobe Reader Touch doesn't show more than one file on screen and doesn't show them on the desktop. Apparently these are very old fashioned things that Microsoft doesn't think we'll want to do any more and calls them "legacy" to make them sound antiquated.
If you want to do these things use the legacy Adobe Reader, a much more powerful and flexible app (and not obsolete in the slightest). http://get.adobe.com/reader . There are no legacy apps in the Windows App Store.

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

How to attach more than one picture on an email

How to attach more than one picture on an email?

Tap the square with arrow on top right and select pictures you want to send (max 5 pictures)
http://i1224.photobucket.com/albums/ee374/Diavonex/f0bd7d73.jpg

How to sync more than one iphone to a macbook?..

How to sync more than one iphone to a macbook?..

Open itunes, connect iphone, select what you want to sync, sync
Do the same for each iphone.

How to add more than one tabular region in a page?...

How to add more than one tabular region in a page?
i have a page, that page contain form and tabular region. when i trying to add another tabular region it showing error
1 error has occurred
Updatable SQL Query already exists on page 2. You can only add one updatable SQL query per page. Select a different page.
but i have to add the tabular in that page.
Is it possible?
pls help...
Thanks and regards,
skud

hi,
even i am searching for some thing similar.
i want to have 3 calendars in one page.
getting same message calendar already exists on page 2. You can only add one calander per page. Select a different page.
pls help.

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

Just bot a macbook pro to replace one of my pc's. can't figure out how to have more than one website open at a time like explorer. Is it possible to do?

I can't figure out how to open more than one website at a time like explorer does on a pc. would like to know if it Is possible or not.

Tabbed browsing is the way. Go to Safari's View menu:
and click "Show Tab Bar." When you see a link on another site you wish to open without closing the first site, simply right-click and select "Open Link in New Tab."

How to share more than one Time Machine folder

Hi,
With Snow Leo Server I found how to find how to share more than one Time Machine Folder but I can't see how to do the same with Lion Server, could you help me with that ?
The goal of that is to offer one TM folder per user which is located on a dedicated partition in order to limit the size of TM backups per user (150Gig).
In Lion, in can only share one TM folder for everybody and I didn'tfind if I can set a limit size per user...
Thank you in advance,

I have figured out a way to enable multiple backup targets.
However, it's one of these things I wouldn't want to describe to anyone except true programmer types, because everyone else has a 90%+ chance of messing up their system if they do something wrong.
It involves turning off file sharing, and then editing the plist files in /private/var/db/dslocal/nodes/Default/sharepoints/
The gist of it is this:
a) first create all the share points you later want to use for TimeMachine, and set them up for afp-only file sharing, also create one TM target, which you can either use later, or have there so the system has one entry it knows how to handle. I just made a bogus one that I'm not actively using.
b) turn off file sharing in Server.app
c) turn off TimeMachine in Server.app
d) now you can edit the files, the easiest is with Xcode, so you may want to install that first
e) for each sharpoint you made in a) there will be a corresponding .plist file in the location indicated, these are the files that need to be edited.
f) for each of these files
     1) the item0 string property in the timeMachineBackup array must be switched from 0 to 1
     2) a new key of type array with the name timeMachineBackupUUID must be created
     3) in the newly created array an item of type string must be placed with the value of a UUID, which can be created with the shell command uuidgen
g) make sure all the edited plist files are saved
h) turn on TimeMachine in the Server.app again
If all went well, you now should be able to go to one of your networked client computers and see all the time machine share points just created as options for being a time machine target.
Anyway, if you go that route: be careful, don't blame me if you muck things up...

How to pass more than one value for one column in procedure

hi
select id, name from col_tab where dept_name in ('ECE','CIVIL');
when i was running this it is working well.
CREATE OR REPLACE PACKAGE pack_str
AS
TYPE type_refcur IS REF CURSOR;
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
IS
BEGIN
OPEN ans FOR
select id,name from col_tab where dept_name in char_in ;
END str;
END pack_str;
the package was created.
my doubt is
1.how to pass more than one value for char_in (e.g ('ECE','CIVIL'))
2. when i was storing the value in string like val = 'ECE,CIVIL' ,
how to get the id,name for ECE and CIVIL.
plz help me

Hi Rebekh ,
I am recreating your packages for the desired output.
CREATE OR REPLACE PACKAGE pack_str
AS
     TYPE type_refcur IS REF CURSOR;
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
     IS
          lv_t varchar2(200);
     BEGIN
          lv_t := REPLACE(char_in,',',''',''');
          lv_t := 'select id,name from col_tab where dept_name in (''' || lv_t || ''')' ;
          OPEN ans FOR lv_t;
     END str;
END pack_str;
Note:-
Input Parameter char_in is a comma seperated value for dept_name
-Debamalya

How to implement more than one AP in a LAN

Similar Messages

Maybe you are looking for