How to import 4K files from new camera JVC GY-HMQ10E in Adobe Premiere Pro CS5 ?

Importing in RED format or other ?

I have used a MacMini to download the 4K content (only short clips were willing to download sofar), and then transferred to a PC I was able to get it to play in RED schemes in Adobe Premiere Pro CS5.
I am just not sure if this is the right way of doing it.
My current concern for anyone with experience with this camcorder:
How can we download/combine from the 4 SD cards the longer clips too on Windows?
I saw a utility but had some extra requirements that I couldn't figure out yet.
On my MacMini only the short clips were willing to download.

Similar Messages

  • Can't open my video files from my camera/SD card with sound into premiere pro or any software. HELP!

    I am on an OS X 10.7.5 and whenever I pug in either my Panasonic HC-V720 or the SD card I can't seem to find the private video file, I get folders like the picture bellow instead.
    I have tried in a different computer running a newer version of OS X and the private file appears instead. I can't seem to get my videos up on premiere pro CS6 with the sound I only get the image/video by importing the .mts files.
    Does anyone know what to do?

    YYou should be asking these questions on the Adobe forums.

  • Does FCP7 directly imports AVCHD files from sony cam?

    Does the new FCP 7.0 directly imports AVCHD files from sony cam?
    Does it need any conversion? If yes, how is the conversion time, and does the conversion degrades image quality?
    Thanks in advance.
    Desmond

    Which sony camera? there are a lot.
    Yes, it needs to convert. AVCHD isn't a format that most editing systems deal with natively. You will be converting it to ProRes. The conversion time is dependent on too many factors to give a precise number. Based on computer used, processors, RAM, how much footage, where it will be stored...all of that. The conversion doesn't degrade the image.
    Here...I have a workflow tutorial for this: Tapeless Workflow for FCP 7 Tutorial
    Shane

  • TS4256 How to open .RAF files from Fuji camera?

    How to open .RAF files from Fuji camera in Aperture 3?

    Only these Fuji cameras are currently supported: http://www.apple.com/aperture/specs/raw.html
    Fujifilm
    FinePix S2 Pro
    FinePix S3 Pro
    FinePix S5 Pro
    FinePix X100**
    X-Pro1***
    X-A1***
    X-E1***
    X-E2***
    X-M1***
    X-T1***
    X20***
    X100S***
    If you have a different camera, use the software that came with your camera to develope the RAW files and convert them to a different lossless format, that Aperture recognizes.

  • How to convert raw files from new fujifilm x-t1 ?

    how to convert raw files from new fujifilm x-t1 ?

    The work around of converting the CR2 to dng either with the dng converter or ACR 6.7 will allow working in LR and CS5 but not with the latest raw conversion engine from Adobe i.e PV 2012.
    Remember to keep a copy of the CR2 files if you wish to utilize the Canon software.

  • How can i copy files from one external hard disk to another using macbook pro with retina display

    How can i copy files from one external hard drive to another using macbook pro with retina display?

    That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
    Clinton

  • How do I transfer files from an external hard drive to my mac book pro

    How do I transfer files from an external hard drive to my mac book pro?

    What files are they? Is it a clone, a TM backup, or simply drag 'n drop?
    If it's the latter, simply drag them back. If something else, please post back with detailed info.

  • How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

    How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

    IMHO Windows would be the place to start.
    Why do you want to load CS5 for Windows?
    Adobe does produce a version of CS5 that runs on OS X so that it would not be necessary for you to have to screw around with Windows. Personally that would be the way to go and avoid the hassles of Windows.
    Allan

  • How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

    I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to  download / buy one? Thanks.

    You didnt need to look very far down the page to see this...
    http://forums.adobe.com/thread/619165?tstart=0

  • Can you transfer files in Adobe Premiere Pro CS5 from a Mac computer to a PC that also has Adobe

    I am looking into buying Adobe Premiere Pro CS5 for my iMac computer, because the guy that I am going to help out is in another state, using Adobe Premiere Pro CS5 on his PC, we will both be editing video to be featured on the Pursuit channel.  My question is will we be able to open up each other's video files, seeing that I am on a iMac and he is on a PC if we are both using Adobe Premiere Pro CS5?  Right now I am using Final Cut Pro X, and he can't read my files, the codecs won't work he says.   Please help this is driving me crazy

    Yes, project files are cross-platform. There are a few caveats, described here:
    "Cross-platform considerations"

  • Mov files in Adobe Premiere Pro CS5 - XDCAM (MPEG) resp MPEG 1/2 (xdvc)

    Problem description:
    I got a bunch of MOV files on a HFS+ formated disk for editing on Premiere Pro CS5 (5.0.3). When I import to Premiere, Premiere says "Codec missing or unavailable". Paragon HFS+ is used to handle the HFS+ formated disk. I copied the data to a NTFS formated disk before using.
    The reseach I did give the following indications:
    I did try to play in Quicktime and Quicktime told that I would need additional software to play the .mov file. But I could execute show movie inspector and it shows "XDCAM EX 1080i 50 (35Mb/s VBR)".
    VLC plays (!) and tells that it is a "Mpeg 1/2 Video (xdvc)"
    MediaInfo says "MPEG Video (XDCAM)"
    Sound is (L)PCM according to the mov inspector programs.
    The MPEG2 format seems to be supported by Premiere (also in HD), forum entries tell me I should be at version 5.0.2 as there Adobe supports the MOV container. So now my question: What am I missing?
    I have no idea on the Camera used to film, but it could be a JVC, as it is told that the JVC writes mov files.

    Hi Colin,
    The explanation is quite simple and it appeared to me sometime during the weekend when executing completly different tasks.
    The video source is different! The small clips (and your test clip) are what came from the camera and was transcoded to mov, my test clip was the edit out of FCP! It was by chance the only mov-file left, all others have been deleted after transforming to mp4, not to keep the data in double and fill up the disks with unnessecary data. So I tested this clip, which was the mistake!
    Testing one of the original input files confirmed your result!
    The difference between the files is having indeed 2 mono audio streams (input mov) vs one stereo stream (edit mov), all 3 obviously PCM.
    Input MOV
    Audio #1
    ID                               : 2
    Format                           : PCM
    Codec ID                         : lpcm
    Duration                         : 2s 760ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Delay relative to video          : 4h 14mn
    Stream size                      : 259 KiB (2%)
    Audio #2
    ID                               : 3
    Format                           : PCM
    Codec ID                         : lpcm
    Duration                         : 2s 760ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Delay relative to video          : 4h 14mn
    Stream size                      : 259 KiB (2%)
    Edit MOV:
    Audio
    ID                               : 2
    Format                           : PCM
    Format settings, Endianness      : Little
    Format settings, Sign            : Signed
    Codec ID                         : sowt
    Duration                         : 9mn 26s
    Bit rate mode                    : Constant
    Bit rate                         : 1 536 Kbps
    Channel(s)                       : 2 channels
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 104 MiB (4%)
    Thanks,
    Lucien.

  • Adobe Premiere Pro CS5.5 crashes after using "File"-Menu

    Adobe Premiere Pro CS5.5
    Hello,
    As of yesterday, can the "File" menu no longer operate. Other submenus can not be done. The program crashes after.
    I have been three times the program is uninstalled and reinstalled. No improvement.
    Yesterday I drove down the PC and there were 21 Windows updates, are there perhaps relationships?
    Who can help me?
    Gerd

    Update! - FIX...
    Spent about 5 hours working with a 2nd level Adobe Support tech and we were able to track down the error. You’re not going to believe this.
    Adobe Premiere was the only application affected by the bug. AF, Encore, Audition were all able to open a WAV file with no problem. Premiere would lock up (Not Responding) as soon as you tried to open a WAV file.
    Come to find out it was not an Adobe problem after all. I installed the Smart Sound plugins in June/July of this year and that plugin was the issue. Once it was removed I could import Wav files again.
    Smart Sound has upgraded the plugin and the new plugin works just fine.
    My thanks to the Adobe tech who stayed with the problem until it was resolved. And I suggested to the SmartSound tech that they find a better way to notify users when they find a bug of this magnitude. But you might guess how well that was revived.

  • For some reason is all my music gone from iTunes, but I do still have the songs on my iPod Touch... So my problem is that I don't know how to import my files from iPod Touch back to iTunes.

    Hey all
    I should export my music to another program, because I do also have this MP4, which needs some files. Well, I did that and it seems like Windows Media Player couldn't open the files, but then I go back to iTunes and I see all my files are gone. Nothing is left, and now I can't syncronize files to my iPod Touch without deleting all the existing files. So now the only thing I want to know, if it's possible, is how to import music (not from Apple Store) from my iPod Touch to iTunes?

    You can use one of the third-party programs discussed here to transfer non-iTunes purchased music to a computer.
    new PC: Apple Support Communities

  • I can't import image files from my camera to Photoshop Elements

    My iMac recognizes my camera (a Canon Powershot S100 Digital Elph).  I know this because it automatically starts iPhoto and loads the images.  The problem is, I am sick and tired of iPhoto, and I want to use Photoshop Elements instead.   When I connect the camera to the iMac (via a USB port), I do NOT get a camera icon signifying a new volume or drive on my desktop.  So when I open Photoshop 4.0, I can't find the files to import.  I could allow the computer to import automatically into the iPhoto library, then manually drag the image files into a different directory for use by PSE, but that seems way too complicated.  Why should I have to do that?  Please help if you can.
    John

    I'm using OS X 10.4.11. 
    Maybe I didn't explain it very well.  Let me try again:
    I would like to be able to connect my camera to the USB port of the iMac, turn on the camera, and then view the images from the camera memory on the screen using Bridge (the subroutine for file management in Photoshop Elements).  I have not been able to do that. 
    Instead, my iMac immediately displays the camera images by opening iPhoto.  There is no option in iPhoto for importing the images to anything other than the iPhoto library.  So I have to go find them there, copy them into the directory were I want them, and then erase them from the library (which is a little tricky by itself).  Then I can manage them in Elements/Bridge.
    I thought when I bought Photoshop Elements that I would be able to open it and then tell it to import the images from my camera, into a directory of my choosing.  That would be less error-prone and a lot less work. 

  • Can't import .mov files from my camera into iPhoto

    I am not able to import .mov files from my kodak camera into iPhoto. It says the file is not readable. Also, if there are any photos after the video file, those are said to be unreadable too, even if I select just the photots for import. I tried to import the .mov file with image capture as well, and that gave me an import error also. I can view the file fine on my camera and iPhoto and image capture both will give me the properties of the video file but will not import. I have imported .miv files before with no trouble. I have tried several different files with the same results. Even tried different memory cards. Not sure how to get this file on my computer or why there is a problem all of the sudden.
    Thanks.

    Welcome to Apple Discussions,
    What model of Kodak is it?
    There is a discussion thread on this topic: http://discussions.apple.com/thread.jspa?messageID=11942367&#11942367
    Try using a media card reader (sometimes built into printers) to see if that allows the import. Others seem to report having luck by importing the movies off the card using a different computer, deleting them, and then importing the pictures.
    Hope that helps.

Maybe you are looking for

  • 10.1.3.2 Does not handle Entity 3.0 beans from Tables like 10.1.3.1

    In 10.1.3.1 I was running the J2EE tutorial with the SR demo application . When you generate an entity bean from the Tables ServiceRequest and ServiceHistories you get two beans one for each and they have @OneToMany and @join meta data. The same proc

  • Will HP pavillion p6-2260ea support dual monitors

    I just bought a HP pavillion p6-2260ea (i3 processor). There are 2 DVI ports on the back - 1 DVI I and 1 DVI D. Will this PC support dual monitors? I have tried connecting 2 monitors using 2 DVI to VGA adaptors (1 DVI-I to VGA and 1 DVI-D to VGA) but

  • Setting up a Time Capsule as just a wireless backup device

    All I want to do is set up a Time Capsule as a backup wireless device. I already have a functioning network on a Linksys rounter (and some of the users on this network have PC's and want NOTHING to do with my Apples-MacBook and MacBook Air). Where ex

  • Save a castmember as graphic

    Hello: I'm capturing an image from USB camera and save it as castmember. Now, I need to save this castmember to a external file like JPG or GIF, etc. Is there any instruction to do this? or can you suggest me a way to do it? many thanks

  • How do I fix lag on flash player 11.7?

    I go to twitch.tv & Justin.tv I get lag on the video streams while watching my friends cast.. how to fix this problem?