How to Import a Forecast & set the view to Weekly or Monthly

As I understand currently it is not possiblt to import a Forecast to set the view to Daily, Weekly or Monthly and the reason being for this is that in the database the forecasts are saved per day (this we can see in table FCT1). The view is at GUI level only.
Does anyone know a work around for this?

Hello Ms Jones,
I am not sure about your question. What do you mean when you say 'import'?
The forcast for the MRP will be saved according to your choice: daily, weekly or monthly.
Thank you for your information.
Kind Regards,
Marcella Rivi
SAP Business 1 Forums Team

Similar Messages

How to set the view, which has to be shown at runtime?

Hi,
in my application i have more than one view, but at runtime only one of these views has to be shown. I want to decide this via a parameter that I get from the url.
How can i set the right view to be showing at runtime?
I tried it with a StartView which fires the right Outbound Plug in his wdDoInit-Method. This is working fine, but the problem is, that the method OnPlugDefault() of ComponentInterfaceViewController isn't called already at this time. So in the Init-Method of the StartView I don't have the given URL Parameter, so I can't decide which Plug I want to fire. The method OnPlugDefault() is called only after the init-method of the StartView.
Is there any other possibilty to set the view, which has to be shown, at runtime?
Thanks and Best Regards
Katharina

Hi,
One way is you can pass the parameter in the URL , read the parameter and then fire the outbound plug depending upon that.
You can read the parameters as follows
HttpServletRequest request =Task.getCurrentTask()
.getWebContextAdapter()
.getHttpServletRequest();
String[] param1 = request.getParameterValues("<<PARAMETRNAME");
if(param1.equals("VALUE"))
fire outbound plug1;
Regards, Anilkumar

How to set the view privilege of a portlet?

Dear all,
I would like to ask how to set the view privilege of a portlet (which is located on the Intranet homepage) to only a group of users?
As far as I know, I can create a tab with view privilege to address the about scenario. But is it possible to directly set the view privilege to the portlet ?
thanks
George (HK)
Welcome to my photo albums at http://community.webshots.com/user/GeorgeLee80
Message was edited by:
georgelkh

OK, you got me there George. I don't know where you can set view rights to an out of box portlet. So how about a different approach?
1) Create a blank page with no nav bar or anything else
2) Assign the group you want to see the notifications portlet view rights on the page
3) Make sure the show as portlet check box is checked on the Optional tab in the page properties
4) Add the notifications portlet to the page
5) Ensure the portlet settings are how you desire in terms of what notifications to show and the region settings are how they should be in terms of border, headers, etc
6) Edit the page where you want the notifications portlet to be shown and add the page portlet you just created instead of the notification portlet
This should achieve what you seek without having to dig into out-of-box portlets.
Rgds/Mark M.

How do I stretch (or compress) the viewing time of a video clip in Elements 12?

How do I stretch (or compress) the viewing time of a video clip in Elements 12?

oxmox
What computer operating system is your Premiere Elements 12 running on? For now, assumed Windows 7, 8, or 8.1 64 bit.
Typically, if you increase the length of a video clip, you will create slow motion. If you decrease the length of a video clip, you will create fast motion effect.
You can right click the clip on the Timeline, select Time Stretch, and use the Time Stretch dialog's settings to change the video duration.
See the Adobe document/section on Set Duration of Clip
Adobe Premiere Elements 11 * Changing clip speed and duration
ATR
Add On...As an aside, if you have not done so already, please update 12 to 12.1 Update, using an open project's Help Menu/Update.

How to import multiple files to the frame area?

How do I import multiple files to create animated GIF's. I
know how to import multiple files into the Fireworks, but if I'm
trying to create an animated gif that has alot of files, How do I
get them into the frames area. It is really a pain importing each
and every file one at a time frame by frame

merry1
after you bring in all your images to the canvas, select all
and in the
Frames Options drop down, select Distribute to Frames.
You can bring multiple images onto the canvas by copy and
pasting from
the folder(s) where they exist.
alex
merry1 wrote:
> How do I import multiple files to create animated GIF's.
I know how to import
> multiple files into the Fireworks, but if I'm trying to
create an animated gif
> that has alot of files, How do I get them into the
frames area. It is really a
> pain importing each and every file one at a time frame
by frame
>

Does the iPad mini have a setting so it can be used with either 120 or 240 electrical current? If yes, how do you go about setting the desired input voltage? I will travel to Northern Europe and want to know if I will need a voltage converter.

Does the iPad mini have a setting so it can be used with either 120 or 240 electrical current? If yes, how do you go about setting the desired input voltage? I will travel to Northern Europe and want to know if I will need a voltage converter.

The iPad charger is dual voltage. You need only a plug adapter to be able to plug your US charger into a European wall outlet. A basic one costs about $2.00. - $6.00. Like this...
http://www.amazon.com/CVID-Grounded-European-Adapter-Adaptor/dp/B0098B5GN8/

How to set the View instance and view attribute to lov field ?

Hi
I created lov and textfield programatically.
I want to set the viewattribute and view instance to that items(lovbean, texfieldbean).
How to set programatically?
Thanks in Advance
Awadesh

Hi
Thanks. Its working fine. But now i got some another issue.
after setting, i put simple system.out.println(Pagecontext.getparameter("idoflov"));
But it returns null value.
why. Actully i want to pass this value (according to my requirement).
The view instance and view attribute are setting correctly. But after that i checked means it returns null value .
plz let me know.
Thanks

How to set the view of a table to the last column?

Hi all,
I have a table that allows user to add rows to it. When the number of columns exceed the number of row the viewport can display, the freshest columns are not in the view.
My question is, how do I force the viewport to view the last rows of the table as the table grows? Instead of just showing the starting rows?

You're mixing columns and rows in your problem description, but
something like the following should be close
Rectangle rect = new Rectangle( table.getWidth()-1, table.getHeight()-1, 1, 1);
table.scrollRectToVisible( rect );: jay

How to set the view format of the numbers in the tooltip.

By default a graph will automatically format the axis view to be a scaled value.
Example: 180321005 will show as 180 M on the axis label for the graph
There is a way to set the scaling on the y-axis of a graph so that it will not be displayed as a scaled number.
m_graph.getY1Axis().getViewFormat().setScaleFactor(BaseViewFormat.SCALEFACTOR_NONE);
Now: Example: 180321005 will show as 180321005 on the axis label for the graph
But is there a way to set the scaling factor for the pop up tooltip that appears when the user mouses over a point on the graph?
Right now the tooltip view shows the y value as a scaled value; therefore, much of the number's percision is lost.
Thanks,
michelle

Hello
Did you find any soloution?

How to set the view HTML source in IE using Notepad to open?

When I want to view the HTML source in IE, Java Web Start is launched instead of Notepad after I install the Java Web Start. How can I change the view source back to using Notepad?

Sorry, a late reply: simply remove (or rename) the JWS Notepad shortcut from your desktop.
It seems that this "lovely" little example application
has taken over IE's "view source" feature by trying to
launch itself in the place of notepad. It would be quite disappointing from the sandbox point-of-view if a JWS application would be able to make such changes without any warning...
It's more like Windows cannot handle two applications with the same name. Just hold down the Windows key, hit R and type "notepad" in the Run dialog and you'll also get the JWS demo -- while typing "notepad.exe" still fires Windows Notepad.
Even more strange: typing "notepad" in a MS-Dos box does not fire the JWS demo, even when you change the current directory to be your desktop, like c:\windows\desktop. However, typing "start notepad" in that specific directory does fire the demo...
Even although in the Windows registry one finds HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Default HTML Editor shows the full path to the Windows notepad.exe, it is simply not using that information. You can't blame that on JWS.
So: simply removing or renaming the shortcut helps you out. Or, even better: put a shortcut named Notepad on your desktop and make it refer to your favorite editor -- c:\program files\accessories\worpad.exe if you don't have anything better -- this will make searching the source code in IE much easier...
Arjan.

How to import a website from the internet

How can I import a website from the internet to copy to
use?

See answer to your other post.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"scan reg" <[email protected]> wrote in
message
news:f5tr8b$anm$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
>
> define a new site in dw.
> set the local folder to a new empty folder
> fill in the remote server info with your ftp info.
>
> connect and Get all the files.
>
> What if it's a dynamically generated site?
>
> Can DW grab all the rendered pages instead?
>
> I'm trying to convert from Joomla to DW
>
> Thanks
>
>
>

Help, how to install jvm and set the classpath using a batch file

hello,
i have created my java application and now have to create an installable / batch file which will install the JVM on the users machine and also the java packages such as javamail and the class files that i have created . it also has to set the classpath.
i would like to know if anyone can tell me how to go about iti.e. how can i install the JVM using a batch file and then place the javamial packages etc in the apropriate directory .
or is it advisable to explain it to the user how to go about it in tht user manual.
and would also like to know that if i install the JVM will the path for the java.exe be set
or will i have to set the path explicitly from the "batch file" so that the user can run the application without and problem just by running the java command followed by filename from the command prompt.

hi,
I have windows and I use it.
The only problem with the free edition is that you can only create 1 launcher and that during the installation you get 1 popup showing that the installer was created with an unregistered version.
Stijn

How to import multiple images at the same time in illustrator?

How to import multiple images in a document at the same time in illustrator?
It's possible?

Script: Place Multiple Files in Illustrator (Kelso)
http://kelsocartography.com/blog/?p=2047

How to open PDF file with the view I wish without many clicks

I am getting many many scanned files daily and I'd like to able to skim thru each file as fast as possible.
Since the way each file scanned is consistent, when I open it, I am clicking a button to rotate it counterclock, then click zoom-in a few times to be able to read the top portion to see if the file is of my interest.
Can we customize the way the files are opened? I wish that once I open it, it will be rotated (so that I don't have to tilt head to read it), and zoom in big enough for me to read it.
I did try (I am new to this) "accessabitly settup assistant", but couldn't achieve my desired effect.
Any suggestions?
thanks.
JQ

Thank you for the suggestions. Appreciated it.
Actually when I asked whether they could scan it differently, I was told "no" for that type of scanner they have, and they have been reading it the same way as I just start to do, for years.
Maybe someone knows about what scanners have the feature to do these tricks?
I tried the preference setting. It's still less manageable. However, I manage to be able to click 3 buttons to get to the top portion to be readable.
First, I rotate it counterclock (which mess up the view zoom in setting preference).
Then I click to "show one page" button;
Then I clcik to make the document to fill the width. (at this point, the zoom in is about 79%).

How to add a button in the view at a specific position

Hi Gurus,
We have a requirement :
To add a button or image at a specific position in the view which is like an indicator showing different color
based on another field .
Example :
Adding a button next to a drop down flield and changing the color of the button based on the name of the color choosen in the drop down .
or Adding an image which can be changed based on the dropdown value or the value entered in the input field .
Thanks ,
Naval Bhatt.

Hi,
Create an Attribute ZINDICATOR , in the same context node in which the dropdown(picklist) attribute,exists.
Let it be a CHAR 1 field.
Implement GET_P and GET_ method.
Pull this field beside the dropdown fields in view configuration.
Now the code =>
Implement the Get_P_ZINDICATOR for this attribute as explained by Robert
Implement Get_ZINDICATOR method as follows
DATA:
     lr_current   TYPE REF TO if_bol_bo_property_access,
     lr_entity TYPE REF TO cl_crm_bol_entity,
     coll      TYPE REF TO if_bol_entity_col.
lr_current ?= collection_wrapper->get_current( ).
IF lr_current IS NOT BOUND.
   value = cl_thtmlb_util=>get_icon_url( 'check_empty.gif' ).
   RETURN.
ELSE.
   dref = lr_current->get_property( 'ZINDICATOR' ) .
ENDIF.
IF dref IS NOT BOUND.
    value = cl_thtmlb_util=>get_icon_url( 'check_empty.gif' ).
    RETURN.
ENDIF.
TRY.
    value = if_bsp_model_util~convert_to_string( data_ref       = dref
                                                                            attribute_path = attribute_path
      IF value IS INITIAL.
        value = cl_thtmlb_util=>get_icon_url( 'check_empty.gif' ).
*      ELSEIF value EQ 'R'
*        value = cl_thtmlb_util=>get_icon_url( 'check_overdue_status.gif' ). " gives RED LIGHT
      ELSEIF value EQ 'Y' .
        value = cl_thtmlb_util=>get_icon_url( 'check_due_status.gif' ). " gives YELLOW light
      ELSEIF value EQ 'G'.
        value = cl_thtmlb_util=>get_icon_url( 'check_nodue_status.gif' ). " gives GREEN light
      ENDIF.
CATCH cx_bsp_conv_illegal_ref.
      CLEAR value.
      RETURN.
CATCH cx_root.
      CLEAR value.
      RETURN.
ENDTRY.
Generally check_overdue_status.gif and other images are std. and are present in all skins.
You need more colors then you have to add those images in the MIME repository in the images folder of the SAP SKIN folder.
You must implement the eventhandler for Dropdown field. For this in the GET_P method of dropdown, use
CASE iv_property
WHEN if_bsp_wd_model_setter_getter=>fp_server_event.
      rv_value = 'COLOUR_SELECTED'.
ENDCASE.
and then implement the event handler EH_ONCOLOUR_SELECTED.
In this event handler, you must set the ZINDICATOR value as ' ' , 'R','G','Y' etc depending upon what is selected in dropdown.
This ensures that a server roundtrip is triggered and so the GET method of indicator field is called as soon as dropdown value
is selected.
Hope this helps.
Thanks & Regards
Suchita

How to Import a Forecast & set the view to Weekly or Monthly

Similar Messages

Maybe you are looking for