How to import a image and compare with another image to find their deviation

i am new to labview , can anyone tell how to import a image and compare it with another image to find their deviation
Solved!
Go to Solution.

This is an quite easy task using the Vision Development Module.
There you can acquire images from cameras or read them form the harddrive, then differntiate them or since VDM 2010 calculate the optical flow between consecutive images.
Christian

Similar Messages

I got the image on the vi,now I want to take rectangle potion from that image and compare with other image

Hi,
Now i have a image on VI ,i want to take rectangale postion of the image and compare with the other image(In this image also i need to take a small postionof it) and show the result.
Both image are equal or not....if it is equal show pass if the image is not ok fail.
Regards,
Sri.

First i would like to thanks for the inputs,
I have made one Vi for comparing the two images and display equal or not.
Problem:if there is a small change in the picture it is showing false ,but the image is ok only the contract ,clarity ,inclination is the problem... i need your help in controlling that image......like controlling the colors and telling if the color , shade, projection of the image of the image is in between this range show it as ok....
i started with cluster taking the out put of the BMP file, but i am not able to do....can u help me on this.
i am attaching the file what i have made...
Regards,
Sri
Color
Attachments:
image.ppt ‏52 KB

HT3951 How can I share books and audio with another computer?

How can I share books or audiobooks with another computer?

You can't re-download audiobooks on any computer - they are currently a one-time only download. Music can be re-downloaded in some countries, they are listed on this page. But you should be able to copy your purchases from, for example, your backup and add them to the computer's iTunes via File > Add Folder To Library.

How to cut out part of an image and replace with another?

ok, i'm a newbie to image editing, and i want to cut out a persons face in a picture and put in another face on the picture. i'm sure this is pretty simple, i just have no idea where to start. can someone point me in the right direction? thanks!

Aperture is not a pixel editor, which is what you need. Photoshop is the app used for this, but it's cost is several times that of AP! As suggested in the second post, look into Photoshop Elements, a slimmed-down and much cheaper version of Photoshop. [I don't use Elements, so if someone knows that it can't do area copies from one pic to another, please join the conversation!]
And get a good book on Photoshop or Elements, there's a huge learning curve involved. I'd suggest going to a book shop, pulling a few such books off the shelf and check their index for editing techniques. Sometimes you'll find one book that gives you the exact step-by-step instructions for doing what you want. Then there'll be others that don't get into the topic or do a poor job.

Space between DIV with image and DIV with image background

I have just about finalized the new design on my website. The only issue I am having now is on the gallery page. There is a thin space between a DIV with an image and DIV with an image background. I am using these DIV's to give the illusion of a blue border. If you look at any of the other main pages on the site the space is not there. Any ideas?
http://liquidfirefishing.com/index.php
http://liquidfirefishing.com/gallery/main.php
Here are a couple of screenshots to show exactly what I mean.

Hello,
both my "IE8" and my "FF 7.01" show the blue boundary lines. Here my screenshots, left side IE8, right side FF:
Header 1
Header 2
Hans-Günter

Just set up lightroom 5 and imported images with sequence number but wanted image number. How do I renumber all images in lightroom with an image number?

How do I renumber all images in lightroom with an image number?

Try line-height: 19px; and display: block; (as shown) on the following css seletor :
ul.MenuBarHorizontal a {
     font-family: Lucida Sans Unicode, Lucida Grande, sans-serif;
     color: #CC6;
     text-decoration: none;
     padding-top: 10px;
     padding-right: 12px;
     padding-bottom: 10px;
     padding-left: 12px;
     line-height: 19px;
     display: block;
Normally setting a height on a container which you have no control over is not a good idea. The text can be enlarged and that will throw everything off. The best way is to set no heights at all but use padding and make sure your background image is flexible enough to accommodate the text enlargement.
ul.MenuBarHorizontal a {
      padding: 12px 12px;
     display: block;

Importing PSDs and TIFs with same image # as related RAW

Before I got LR4 I developed a series of images (thousands) with Bridge and Photoshop. I've now decided to build a LR catalog of the series.
As I import I want to use the Image # option to rename files, making the whole mess of photos "cleaner" with unique names, etc. Of course I want ot import Raw's and the Tif/Psd images I made along the way. I notice the Image numbering process does NOT recognize the relationship between the raw and edited files. So files (img_123.nef and img_123.tif) become (img-01.nef and img-02.tif). I would prefer the tif file be named img-01.tif so the link between the two remains obvious.
Is there a way to make this happen? Key to creation date & time?
I realize this is a really specific issue, but if the point is to make the series tidier and more coherent it would be a useful feature.
Thanks in advance.

Date and time works, but it's a little indirect and you can't so easily search for this. You can IIRC extract just the numerical part of the original image filename, and build that into your renaming options - maybe along with a sequence number to impose uniqueness. This should be buried inside all versions derived from the same original capture, at least by default.
As one example, you could get maybe ... 00024-img121.nef, 00025-img122.nef, 00026-img122.tif, 00027-img122.tif, 00028-img123.nef ... - if you had two added TIF edits of the image with 122 in its original name, as well as an original Raw of 121, 122 and 123. A text search for "img122" would then find all related versions.

My i phone was stolen and now I need to upload my contact to my i cloud from my I tunes...any ideas how to import contacts into i cloud, with either i tunes or with old iphone

My i phone was stolen and now I need to upload my contacts to my i cloud from my I tunes...any ideas how to import contacts into i cloud, with either i tunes or with old iphone?

If you have the contacts on the phone you can sync the phone to the computer. The contacts should then show in address book. At this point you can sync the address book data to iCloud. You have to make sure the iCloud account is setup on the computer and this will not work unless the computer is running 10.7.2 of course. There are other ways to add the contacts to iCloud like through the phone but the phone must be running iOS5. If it is you can simply add the cloud account to the phone and toggle the contacts slider. You will get a prompt to keep or delete the contact data. Of course you keep. Then you will get a prompt to merge at which point you do. This should merge the contacts on the phone with iCloud. Hope this helps.

Aperture image-control compared with Photoshop?

I'm looking to get Aperture 2. I've been using iPhoto as a library, and Photoshop to control\doctor images. How does the Aperture image-control compare with Photoshop's? I'm not thinking so much here about fancy plug-ins, just basic, but subtle, color, contrast, cropping controls ... especially dealing with the highlights and shadows.
Any info from a user would be most appreciated,
Thanks,
Ben

Same problem here...
It started recently so I think some update create the problem.

How to import seeburger adapter and mdm adapter in sap pi 7.3

Hi all,
how to import seeburger adapter and mdm adapter in sap pi 7.3

Hello
To import the Seeburger adapters, follow the instructions in the Master Installation guide and the individual guides for each of the adapters. These are available with the Seeburger software downloads.
Regarding the MDM adapter, this is the wrong forum for that question. Try the MDM forum (but first, try searching the forum as this is a very basic question).
Regards
Mark

How to get count,index and compare to arraylists

hi
how to get count,index and comparing of 2 arraylist.... plz suggest me asap...

How is your question related to JDBC? And what have you done so far with your code?

How do I synchronise audio and video with an mpg file created in elements 11 ?

How do I synchronise audio and video with an mpg file created in Premier Elements 11 ?
The source files are VOB files, and there is no problem with those source files. But after creating the mpg file, the audio can be out of sync by 1 second or even 10 seconds, and sometimes zero seconds (ie perfectly OK). That varies. The variation might be linked to some of the VOB files. ie. some are OK, and some are not.
Can I fix this automatically in Elements 11, or am I doing something wrong ?

Hartwood,
First, Premiere (both Pro and Elements) do not handle MPEG Audio perfectly - they like some files, but not all files with MPEG Audio. That makes a VOB a less-than-perfect source file. Still, with a bit of work, one should be able to edit it just fine. One of the factors is that there is a very slight block-size difference between the Encoded Video Stream and the Encode Audio Stream in a muxed MPEG-2 file. That often does not play into things, but can cause slight OOS (Out of Sync) issues. Also, both Premieres need to create all I-Frame files for the Video Stream, which is in GOP (Group of Pictures) structure, so what one sees on the Timeline is really a proxy of the MPEG-2 file's Video Stream. The Audio Stream must also be Conformed to PCM/WAV @ 48KHz 32-bit floating point, to be edited. That Conforming is perfect when one has PCM/WAV @ 48KHz 16-bit for the Audio Stream, but requires more work, when the Audio Stream is MPEG (one reason that some MP3's do not work well in Premiere). Several factors involved here, and a fair amount of work for the program. That is why DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio works so perfectly.
Now, fixing OOS might be easy, or might require a bit more work. This article goes into some workflows, that might be helpful: http://forums.adobe.com/thread/436751?tstart=0
I can feel your pain, as I almost went crazy trying to fix OOS in a client's Project. They ONLY had the finished DVD, from which to work. The disc met the DVD-standards, so everything ripped/Imported fine, and when the simple edits were done (IIRC, there were four scenes, that had to be shortened, and then several Titles added), everything played fine in the Timeline. However, when I Transcoded that Timeline to be authored in Adobe Encore, two scenes went OOS. I went back to Premiere, and checked - all perfect there. I tried to judge the number of Frames that the Audio was out, in those scenes, and nudged them, tested, nudged, tested, and no matter what I did, I could never get the output files perfect, when Imported into Encore for authoring to DVD-Video. I tried DV-AVI, and letting Encore set the Transcoding automatically (usually a great way to work), I tried manually setting the Transcoding in Encore. I tried outputting to MPEG-2 from Premiere, and Importing that. No matter what I did, those two scenes were just OOS, and I could not even seem to improve them - it was like they were just locked OOS. I finally did some more editing, to break things up a bit, added a cut-away shot here, and there, and minimized the perceived OOS, but could never get it perfect. It was like trying to pick up quicksilver with a pair of tweezers!
Good luck,
Hunt

How do I use Qt and OpenGL with Visual Studio

Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
Embedded firmware design(C and Assembly).
The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
Thanks
Alexandros

Hi ClassicalGuitar,
The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

How to link Icloud calendar and contacts with windows 8

How to link Icloud Calendar and contacts with windows8

Hi ATarakdjian,
If you are having issues configuring iCloud Calendar on your Windows 8 machine, you may find the following article helpful:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Cheers,
- Brenden

How to replace a substring that starts with and end with another substring?

Hi,
I am trying to parse data from HTML tables. First I want to remove all useless tags like <font>. Now, how can I remove substrings like-
*<font face="Verdana, Arial, Helvetica, sans-serif" size="1">My_Data_to_parse</font>*
I was searching for any method which replaces a substring what starts with a substring (in this case "<font") and ends with another substring (in this case ">") . Is there any method like that? Or any better solution?
Another situation like the following-
*<td align="left" height="30" width="100%">*
In this case I want to remove all the height, align , width etc and make it as simple as "<td>". How can I do that?
Finally, all I am trying to do just to parse data from the tables in a html file. Is there any parser API or library to help me do that? Or to bring the data down to array from the tables based on table structure? Please suggest me.
Thanks in advance.

probably the best place to start is to search for the "<keyword" of all of the html keywords, then search for the location of the next ">" - this will indicate the end of the <keyword> opening tag.

How to import a image and compare with another image to find their deviation

Similar Messages

Maybe you are looking for