How to import a PSD file into Indesign WITH layers so it can be edited/saved as an InDesign file?

How to import a Photoshop file into Indesign CS6 so that it's layers show in InDesign and it can then be edited/saved as an InDesign file?

MyTienN wrote:
Someone had mentioned the possibility of saving each individual layer in Photoshop as a png file and importing into Indesign and adjusting it in there
What do you mean by "adjust"? Editing of Photoshop images should be done in Photoshop.
Sure, it's possible to save individual layers from an image in Photoshop as inidvidual files in a variety of formats, but what's the point? You could just as easily import the layered file, then copy/paste it into a new layer for each layer in the image and use layer visibility to control which ones show. I don't think that will do you a lot of good, though, if you use adjustment layers or opacity controls on the layer in Photoshop.

Similar Messages

How to import iTunes purchased song into video with "Muvee autoProducer"?

Using an iTunes purchased song and also "Muvee autoProducer" for the first time and can't use my iTunes purchased song to import into my video. Following the instructions the song doesn't come up as a MUSICFILE, but it is found by selecting ALLFILES. It is an Audio file (protected). For some reason the Windows Media player symbol appears as the program to open file. I select to add it to my video and an error occurs:
"The format of the music file that you have selected is not supported."
5(80040265).
Have I done something wrong ? Can I change the file format in some way to use ?
Solution is greatly appreciated THANKS!

I think I have figured it out. I found Popcorn 3 and Crunch by Roxio which will do the job!
Thanks everyone!
Captain

How do I import a PSD file into AI?

How do I import a PSD file into AI?

Place the PSD (File menu) if you are bringing it into an existing AI document, or simply choose to Open it if you are going to use the document size from the PSD file and simply add to it.
Take care, Mike

How to import a XML file into the document?

Hai,
i had created a table using xml file....
Now i want to import that xml file tabel into the document...
Can any one tell me how to import the xml file into the document?
thanks
senthil

Hai...
this is senthil...
i'm beginner for creating adobe indesign plugins..
i want to import a html file in the document...
i want to create a table by using html tags and
that table will be imported into the document..
How shall i do it?
can any one plzz explain me?

How to I import Apple 'Pages' text into InDesign while keeping the formatting?

How to I import Apple 'Pages' text into InDesign while keeping the formatting?

I have imported the rtf file, but it shows up as only one line with a grey line after it, even though there are multiple lines

How to import a flv-file (downloaded form YouTube) into iMovie?

How to import a flv-file (downloaded form YouTube) into iMovie?
It needs to be converted to which format?
Suggestions how to do that?
Thanks.
Mattie
The Netherlands

http://perian.org (free).
QuickTime Player Pro ($30).

Can't import any .psd files into after effects.

Hello all.
I was using CS5 master collection without issue, for a year.
Decided to upgrade to the CS6 master collection and that’s when the problems began.
For example, I can’t import any .psd files into AE.
All files are saved in RGB mode.
The previous files were made on CS5.
I made a new .psd file in CS6 with just a couple of layers on it, couldn’t import that either.
I’ve tried Ctrl-alt-shift to delete preferences, that had limited success. I can import a file and do a little bit of work on it but as soon as I close the file down and opened it up again, it does not recognise the .psd file.
The errors I’m getting in AE are many
For example:
After Effects warning: Reading past end of file
After Effects error: Could not open intro.psd because it is not a valid Photoshop document
After Effects error: Crash in progress. Last logged message:<8104><dynamiclink><5>C:\ProgramFiles\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro exe
After Effects error: Not enough memory to initialise PSL
I have un-installed and re-installed many times.
I’m using Windows 8, with 32ram. Hard drives C: 100mg, D: 2 Tb
I’ve tried installing on both drives, still the same thing happens.
Does anyone out there in Adobe Land have any ideas?
Totally confused
Cheers,
Gary.

Hi Arie,
Thanks for your response.
It actually happens with every .psd file regardless of size or specs.
All the other programs in the CS6 master collection work fine, except for AE and PS.
I tried the small file. Created a small file, 100 px by 100px 72dpi, just with a gradient background. Same thing, not enough memory to initialise PSL.
I got the adobe cleaner, and re-installed on my system (again) .... same thing.
As long as I open AE with doing ctrl-alt-shift every single time or export layers from PS individually I seem to be OK.
The problem is far from solved, so I guess i just have to put up with workarounds.
Thanks for taking the time to respond

Imported a .psd file into project - why showing up as a sequence?

hi everyone
i successfully imported a photoshop file into a project recently, after help from you, and it ended up working fine. I adjusted the size and placement in the viewer and got what i wanted.
i have tried to do it again, with a different photoshop file, however this time when i import it into the browser it appears with a sequence icon, rather than clip icon. so when i double click to open it up and adjust - it opens a new dedicated timeline rather than in the viewer - i THOUGHT i'd done everything the same - but i guess not.
what did i do different?
thanks
hugh

Its a feature! Not a bug. By importing a .psd file you can play with the layers in FCP. Apply motion features to a layer, fade the layers on and off at different times, or just change the opacity to suit your background. I know several people that create all their lower thirds for a show in one .psd file and then change the info by turning on and off the different layers. The advantage is you can easily maintain control and placement of your graphics. Like the previous responder I personally don't like .psd's in my timeline. I prefer .pict. Probably because when I started editing it was the only choice on a Mac and it allows for an alpha channel. Using alpha or matte channels make the best keys.
Bill

Importing Microsoft Word comments into InDesign CS5.5 [Mac]

Has anyone had success importing Microsoft Word comments into InDesign 5.5? I've read that this is possible, however, all my attempts have failed. I've checked that Track Changes is on in both InDesign and MS Word.
The one pattern with all the files I've attempted is that, by the time I receive the file, the author has already accepted all tracked changes. The comments remain, but they do not import into InDesign.
I have 'track changes' ticked on the import dialog.
Is there anything I'm missing? Tips from people who've done this successfully would be greatfully apprecated.

Hi BhSimonP,
Did you got any solution to this problem. I am having same requirement now.
Please help me with your answer.
Thanks,
Gopal

Importing a .psd file - getting weird effects with drop shadows!! HELP!

Hi all,
I'm trying to import a psd file as my site and then animate each page.
I have each page set up as a different layer and am importing each page as a movie clip so i can animate each one separately.
The problem is that i have some images on each page that have drop shadows ( i have flattened these in photoshop so there is no longer the blending options layers attached). When flash imports all the layers it obviously has all of them visible at the same time initially.
When i then go through and separate each page to show at different points in the timeline, the images with drop shadows are now showing the image that was underneath it on import, instead of the drop shadow. Difficult to explain, but if you imagine a page with a square in the middle. That square has a drop shadow along two edges which is a slight shading. On a different page (on the layer underneath) there is just a big image of the sea (could be anything). When i import them, the page with the square is sitting directly on top of the page with the image of the sea. I separate these in the timeline so they show at different points, but when it's just the page with the square showing (the page with the sea isn't showing at this point), instead of the nice shading for the drop shadow, in it's place is the thin part of the image of the sea that was initially under the shading for the drop shadow....
Can anyone suggest what is happening and why, and how to quickly fix it in Flash. It took me AGES to import the whole site and all the pages, but now all the movieclips are completely useless because all the drop shadows are messed up with the images that were importing underneath them???!
I'm in a real rush here too, so any help would be greatly appreciated!
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

How to import multiple vcard contacts into iphone4

How to import multiple vcard contacts into iphone4

I had a Nokia C6-01 and had to import the contacts to my Iphone 4S. This is how I did it
1. Open Nokia Suite and Click on Contacts
2. Select all contacts. Click on File -> Import Contacts .Specify the folder that you are creating . For ex: C:\vcards.
Now you have multiple .vcf files in this folder.
To combine the multiple .vcf into a single .vcf
a . Open command line interface (click Start -> Run, or windows button + r and type cmd to launch it).
b. Navigate to the folder where multiple vCard files are by entering cd "C:\vcards", if the folder is there.
c. Enter the command copy /a *.vcf combinedfile.vcf in the command prompt.
3. Now add this file as an attachment and mail it to your email address. Open the email on your iphone and click on the attachment.
4. It will prompt you to add the contacts. Now you have all the contacts on your Iphone.

How to import an .tar file in to NWDS

Hi,
Could any one let me know how to import an .tar file into NWDS
Laasya.

i don't think it is supported

How to import an Excel file

Hi ,
I amwriting a BDC Program..
How to import a Excel File by Browsing the Excel file from the Directory and Storing that values in the internal table.
Can any one send the code for this,
Points will be awarded.
Regards,
Jayasimha Jangam.

Hi,
      Create a select parameter. at selection screen, use FM F4_FILENAME to get the dialog box.
see the sample code.
*&      Form display_dialog
      To display the pop up dialog box
FORM display_dialog.
Calling FM to display File Select dialog box
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     program_name        = syst-cprog
     dynpro_number       = syst-dynnr
    FIELD_NAME          = ' '
   IMPORTING
     file_name           = p_file .
ENDFORM.                    " display_dialog
FORM upload_data.
DATA : lt_itab   TYPE STANDARD TABLE OF alsmex_tabline,
         ls_itab   TYPE alsmex_tabline,
         ls_upload TYPE ty_upload_data.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_file
            i_begin_col             = 1
            i_begin_row             = 2
            i_end_col               = 5
            i_end_row               = 50000
       TABLES
            intern                  = lt_itab[]
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE i000 WITH text-t04.
    LEAVE LIST-PROCESSING.
ENDIF.
CLEAR ls_itab.
LOOP AT lt_itab INTO ls_itab.
    CASE ls_itab-col.
      WHEN 1.
        ls_upload-matnr = ls_itab-value.
      WHEN 2.
        PERFORM convert_to_decimal USING ls_itab-value.
        ls_upload-bmeng = ls_itab-value.
      WHEN 3.
        ls_upload-idnrk = ls_itab-value.
      WHEN 4.
        PERFORM convert_to_decimal USING ls_itab-value.
        ls_upload-menge = ls_itab-value.
      WHEN 5.
        ls_upload-meins = ls_itab-value.
    ENDCASE.
    AT END OF row.
      APPEND ls_upload TO gt_upload.
      CLEAR ls_upload.
    ENDAT.
    CLEAR ls_itab.
ENDLOOP.
Deleting the contents of internal table
FREE lt_itab.

How to import a *.dmp file (exported from 10g) to 8i database?

Hi everybody!
Could anybody tell me how to import a *.dmp file (exported from 10g) to 8i database?
I have tried but it seemed to be error "wrong version".
Thanks a lot!

From 10.1.0 to 8.1.7 => Use the EXPORT 8.1.7 to export the data from the 10.1.0 database and IMPORT 8.1.7 to
import the data into the 8.1.7 database.
Metalink note 132904.1 Subject: Compatibility Matrix for Export & Import Between Different Oracle
Nicolas.

Importing a PSD document into flash?? Help

Hello,
I am trying to import my PSD document into flash, I designed my website in photosphop but for some reason flash
seems to handle everything a little weird. Can Flash handle the different you place on things from photoshop?
t=Thanks
B

Usually it is easier to separate your psd and save each element for web then import to those to Flash and rebuild.
But it is indeed handy to import your psd directly. If you do so:
Play with your import settings when importing your psd to Flash. You may want some items to remain vector shapes, you may or may not want to keep text editable, some you may want to import as bitmaps, most you will probably want to convert to movie clips, etc.
A few bullet points:
• Flash will turn your layer styles to separate bitmaps and will usually distort them funny.
• Make sure your psd color profile is sRGB before importing to Flash.
• Some fonts will not import to Flash from a psd nicely, if you dont need to edit the text you should convert the type to shape (make a copy of the layer first, though, you may have to go back and edit - typos happen)
• Flash will turn bitmaps as pngs. These may increase file size, so you may still have to go back to PS and export some as jpg (if you do though, once you import those to flash, right click in your library and click Properties and uncheck "Use Imported JPG Quality" and set the percentage yourself).
The list can go on, but I'm tired and can't think of all the tips and tricks.
One thing is for sure: Be sure to go over all the importing options in Flash and all the layers carefully before hitting OK.

How to import a PSD file into Indesign WITH layers so it can be edited/saved as an InDesign file?

Similar Messages

Maybe you are looking for