How to import a single schema into multiple target schema?

Hi,
I want to import a schema named sd from my source database to my target database in schema sd1 and sd2.
I have tried using the following impdp parameter which is throwing error :-
impdp system/system schemas=sd remap_schema=sd:sd1,sd:sd2 directory=backup dumpfile=8.12.13.dmp logfile=8.12.13.log
Please help me.

If you look up the syntax in the docs, you will see that while you can remap many schemas into one, you cannot remap one schema into many.

Similar Messages

How to make a single recording into multiple songs garageband

I recorded my band's gig the other night using my Zoom H2 recorder. I want to take the single 1.5 hour recording (12songs) and make it into a CD with 12 individual tracks. I would like to use garageband so i can edit out the deadtime between songs but I don't know how to make a CD.

johndmalone wrote:
I want to take the single 1.5 hour recording (12songs) and make it into a CD with 12 individual tracks
http://www.bulletsandbones.com/GB/GBFAQ.html#chaptertocdtracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to devide a single task into multiple tasks in OSM 6.3 ?

Hi all,
i am using OSM 6.3 and trying to devide one task in to multiple tasks, such that the subtasks can be shown in a combo box ?
basically the requirement -->
There is a order and the order can have many services which are independent of each other. So i want to show the different services to user, which they can select and accordingly the reqired data elements will be visible in webclient.
i am new to this domain so may not be able correct in wordings.
thanks in advance.
regards,
Rosaa

Hi,
if you are using >= TS2010 there is support of 64Bit integers (int64 and uint64).
with it you are able to store your 6 bytes.
I am using it for saving MAC-Address.
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Splitting single video into multiple files - workflow improvements?

I regularly need to split a single video into multiple separate files that are used by other programs. I'm using Premiere Pro CS4 for a number of reasons including the ability to easily and accurately select a scene by individual frames, native audio and video effects/filters, and the ability to import and export various video types. I'm open to using other tools, but I haven't yet found one that is even close to Premiere Pro when it comes to accurately selecting split points.
I'm not a Premiere Pro expert. I have been doing this for about four months and have read many resources (books, forum posts, help guides) to refine the workflow I'm currently using. My question: does anyone know any improvements that might save me time/keystrokes.
Current workflow:
I've bound F8 to File > Export > Media
Import video file
Open in source monitor
Set In and Out points for scene in source monitor
Ctrl-drag from source monitor to Project Panel (creates a subclip)
Repeat 3 and 4 for all scenes/subclips
Select all subclips from Project Panel and drag to timeline
Set work area bar to first subclip in timeline by the following four keystrokes: Home, Alt-[, PageDown, Alt-]
Type F8 (File > Export > Media shortcut). Type output file name, click OK and the first subclip is put in the AME queue
For the remaining subclips, type: Alt-[, PageDown, Alt-], F8, output file name, OK and repeat until done
Any thoughts/ideas on workflow improvements?
Thank you!

Thank you Hunt.
For the sake of brevity, I didn't include all of the details about the various aspects of the projects.
Early on I was doing what you suggested and yes, it is a little quicker. I learned (painfully) a couple of months later that I sometimes have to go back and adjust the clips and this method (trim to timeline with no subclips) resulted in quite a bit of duplicate effort (to reobtain start/stop points). I've since learned that managing the "scenes" as subclips in topical bins allows me to go back and make adjustments, long after I've totally forgotten about the project content, without a lot of unnecessary reworking.

How do i combine single pages into documents with Adobe?

How do i combine single pages into documents with Adobe?

Hi zebideeplus,
Using Reader, you need to purchase subscription for Adobe PDF Pack to combine PDF files into single document.
Refer: Acrobat.com Help | Adobe PDF Pack FAQ
But, if you need to combine single pages, then it can be done with Adobe Acrobat only.
Let me know if you have further queries.
Regards,
Anubha

How do I separate a PDF into multiple PDFs using Adobe PDF Pack?

How do I separate a pdf into multiple pdfs using AdobePack?
[Title edited to reflect actual product name... Mod]

I do not find "AdobePack" when I look at the list of forums https://forums.adobe.com/welcome
What is the exact name of the program you are using... Acrobat, or are you using the online version at Acrobat.com?
ADDED... found Adobe PDF Pack (read only) so will move this message

How to import a PDF form into FormsCentral

Hi,
Please help me in How to import a PDF form into FormsCentral.
Thanks,
Techvedic

Hi Techvedic,
Import of form in Formscentral depends on how it was created. If you used LiveCycle designer to create the original form then it cannot be imported. However, if the form is created in Acrobat then you can import it by clicking on Import PDF form under Create New form heading.
Note: In the imported form you may edit the position of the submit button, but other design edits to the imported form will need to be made in the tool used to create that form.
Hope that helps, let me know if you have any other question.
Regards,
~Pranav

How to import a XML file into the document?

Hai,
i had created a table using xml file....
Now i want to import that xml file tabel into the document...
Can any one tell me how to import the xml file into the document?
thanks
senthil

Hai...
this is senthil...
i'm beginner for creating adobe indesign plugins..
i want to import a html file in the document...
i want to create a table by using html tags and
that table will be imported into the document..
How shall i do it?
can any one plzz explain me?

How to import a PSD file into Indesign WITH layers so it can be edited/saved as an InDesign file?

How to import a Photoshop file into Indesign CS6 so that it's layers show in InDesign and it can then be edited/saved as an InDesign file?

MyTienN wrote:
Someone had mentioned the possibility of saving each individual layer in Photoshop as a png file and importing into Indesign and adjusting it in there
What do you mean by "adjust"? Editing of Photoshop images should be done in Photoshop.
Sure, it's possible to save individual layers from an image in Photoshop as inidvidual files in a variety of formats, but what's the point? You could just as easily import the layered file, then copy/paste it into a new layer for each layer in the image and use layer visibility to control which ones show. I don't think that will do you a lot of good, though, if you use adjustment layers or opacity controls on the layer in Photoshop.

How to import the internal table into subroutine as parameter

how to import the internal table into subroutine as parameter, and its structure can be recognized inside the subroutine

Hi Yong,
try this:
parameters: p_tabnm like dd03l-tabname.
field-symbols: <fs_tabname> type standard table.
data: itab_ref type ref to data.
create data itab_ref type standard table of (p_tabnm)
                     with default key.
assign itab_ref->* to <fs_tabname>.
select * from (p_tabnm) into table <fs_tabname>.
perform subroutine tables <fs_tabname>
                   using p_tabnm.
*&      Form subroutine
      text
     -->P_<FS_TABNAME> text
     -->P_P_TABNM text
form subroutine tables   p_tabname type standard table
                 using    p_tabnm.
Here p_tabname already has the structure of the table you gave as input
parameter
endform.                    " subroutine

How to import an assignment block into a word document

hi all,
how to import an assignment block into a word document ,actually we an option called import to Excel,
but i don't know make it for Word document.....
Regards
Sunil Kumar SA

Use the Media Browser in Word, which you can access via the Ribbon (Insert -> Picture) or via the Insert menu.
Regards
TD

How can I separate one column into multiple column?

How can I separate one column into multiple column?
This is what I have:
BUYER_ID ATTRIBUTE_NAME ATTRIBUTE_VALUE
0001 PHONE_NUMBER 555-555-0001
0001 EMAIL [email protected]
0001 CURRENCY USD
0002 PHONE_NUMBER 555-555-0002
0002 EMAIL [email protected]
0002 CURRENCY USD
0003 PHONE_NUMBER 555-555-0003
0003 EMAIL [email protected]
0003 CURRENCY CAD
This is what I would like to have:
BUYER_ID PHONE_NUMBER EMAIL CURRENCY
0001 555-555-0001 [email protected] USD
0002 555-555-0002 [email protected] USD
0003 555-555-0003 [email protected] CAD
Any help would be greatly appreciated.

This is another solution. Suppose your actual table's name is test(which has the redundant data). create a table like this:
CREATE TABLE test2 (BUYER_ID number(10),PHONE_NUMBER varchar2(50),EMAIL varchar2(50),CURRENCY varchar2(50));
then you will type this procedure:
declare
phone_number_v varchar2(50);
EMAIL_v varchar2(50);
CURRENCY_v varchar2(50);
cursor my_test is select * from test;
begin
for my_test_curs in my_test loop
select ATTRIBUTE_VALUE INTO phone_number_v from test
where person_id=my_test_curs.person_id
and attribute_name ='PHONE_NUMBER';
select ATTRIBUTE_VALUE INTO EMAIL_v from test
where person_id=my_test_curs.person_id
and attribute_name ='EMAIL';
select ATTRIBUTE_VALUE INTO CURRENCY_v from test
where person_id=my_test_curs.person_id
and attribute_name ='CURRENCY';
INSERT INTO test2
VALUES (my_test_curs.person_id,phone_number_v,EMAIL_v,CURRENCY_v);
END LOOP;
END;
Then you will create your final table like this:
create table final_table as select * from test2 where 1=2;
After that write this code:
INSERT ALL
into final_table
SELECT DISTINCT(BUYER_ID),PHONE_NUMBER,EMAIL,CURRENCY
FROM TEST2;
If you have a huge amount of data in your original table this solution may take a long time to do what you need.

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

How to insert one table data into multiple tables by using procedure?

How to insert one table data into multiple tables by using procedure?

Below is the simple procedure. Try the below
CREATE OR REPLACE PROCEDURE test_proc
AS
BEGIN
INSERT ALL
INTO emp_test1
INTO emp_test2
SELECT * FROM emp;
END;
If you want more examples you can refer below link
multi-table inserts in oracle 9i
Message was edited by: 000000

How to Park the single invoice for multiple purchase orders

Hi,
How to Park the single invoice for multiple purchase orders?

brother this is possible to enter one Invoice fro multiple purchase order.
call transaction MIR7, select " purchase order/Scheduling Agreement" from the PO refernce Tab. then click on arrow. give your purchase orders here.
Thanks

How to import a single schema into multiple target schema?

Similar Messages

Maybe you are looking for