How to import a .swf flash movie
I am trying to put this .swf flash file in keynote but it wont go in. I drag it in and a picture of a piece of film shows up...its not recognizing the format.
What and how can i convert this .swf flash file to be compatible with keynote.
Thanks
Hello Tara,
It's simple, I've developed an animation with Catalyst (took me 2 days...to learn a move forward) and i would like to use that animation inside a flash website. so i'm trying to load the Catalyst swf file animation inside my flash main movie without success !
I"m tryin to do : loadMovie("catalyst_animation.swf", TargetA); TargetA is an empty movie clip located a certain position.
the loadMovie("catalyst_animation.swf", 0); is working but this is not what i want for a clear reason (loading inside and at a certain position).
Thank you for our help.
Similar Messages
-
How can HTML call a Flash movie?
Greetings Everyone!
I'm sincerely hoping that someone has the answer for me. I'm
a newbie, but trying so very hard to understand... :) I've read
books, pages & pages of this forum, 'net searches - I haven't
found a complete answer to my challenge so far - thanks in advance
for any help you can give...
Here's where things are:
1) I've created a series of swf Flash movies that loop (at a
particular size so they can play inside of an html table cell)
2) I've created html buttons in another cell
What I'm trying to do:
1) Like a swap file in HTML (where you click a button and an
image changes elsewhere on the page, click another button, and that
image swaps to a different image file)
I want to have a flash movie play on a click of a button, click
another button, and a different flash movie plays in the same
spot.
The challenge is the interaction between Dreamweaver and
Flash and getting HTML to talk to Flash.
Here's the code direction I've been heading ...
...IN MY HTML code...
I have a onMouseClick event for each button link. In this
code I set some variable names inside it.
onMouseClick="setFlashVariables('sendmovie','myMovie=activeMovie1')"
---- this would be for button 1.
onMouseClick=
"setFlashVariables('sendmovie','myMovie=activeMovie2')" ---- this
would be for button 2
onMouseClick
="setFlashVariables('sendmovie','myMovie=activeMovie3')" ---- this
would be for button 3
Basically, I'm setting a 'myMovie' variable to 'activeMovie1'
or 'activeMovie2' or 'activeMovie3' when one of the buttons is
clicked.
If 'myMovie' variable is equal to 'activeMovie1' by clicking
a link, this will tell a flash movie: (" Hey flash! Variable
'myMovie' is equal to 'activeMovie1'. Act accordingly."). When the
2nd button is clicked, 'myMovie' will be equal to 'activeMovie2'
and so on.
I need to declare the 'myMovie' variable in my flash movie -
how do I do that?
...IN FLASH...
1. I need to create one variable which will act as a variable
receiver from HTML. (What I called "myMovie")
2. I gather I need to create an IF statement so that
"myMovie" is set to which "activeMovie" ( it could be
activeMovie1/activeMovie2/activeMovie3 etc ) ,
----->Question:
Where should the IF statement be and
How should it be written?
Admittedly I don't know Action Script 3 very well.
if myMovie is equal to "activeMovie1"
then load a movie. (This movie will be a movie related to my
1 Button.)
else if myMovie is equal to "activeMovie2"
then load a movie. ((This movie will be a movie related to
your 2 Button.)
else if myMovie is equal to "activeMovie3"
then load a movie. ((This movie will be a movie related to
your 3 Button.)
Here's where I'm stuck....
1) If I've already made my movies into swf files where does
an IF statement go?
2) I'm missing the mechanics of how to connect the dots here
- how do I get button 1 to load movie 1 and start playing
automatically? When I click button 2, movie 1 is replaced by movie
2 and starts playing automatically.
It's a detailed explanation (I know) - I'm hoping someone has
an answer for me that's equally explicit. Thanks so much much for
taking the time to read it!!Anybody?
-
How can I get my Flash movie to load correctly in Internet Explorer?
I loaded an swf into an html. It loads fine in Safari, Firefox and Opera. However, in Internet Explorer the swf covers up part of the copy. I tried everything with the css to get it to work, but it nothing has helped. Among other things, I tried changing the z-index in the css, but that doesn't do anything. Is there a specific code I need to add to my html regarding the importing of the flash movie that would be specific to IE?
This thread should be in either the Flash Pro forum or the Dreamweaver forum.
This is for Flash Player and Flash Player related issues, not Flash or browser or HTML issues. -
HT3775 How to import a Video Media movie into a iMovie HD?
How to import a Video Media movie into a iMovie HD?
The iMovie help lists the types of movie files you can import.
I usually have to use Quick Time Pro (not free) to convert what I have to a format iMovie will accept.
Or I use VLC video player (free). -
How to import a .swf photogallery to my .fla project?
Hi, I need help please, I am very new to Flash. I created a
photo-album that came as a template with CS3 and published it to
.swf file; separately I am designing a .fla website hoping to use
the photo-album in it. I imported .swf photo-album into my .fla
library, but now I am stuck - I don't know how to link this .swf
file to a button in my .fla site. I tried actionscrip code, but I
received an error when testing the movie. I can't find an answer to
this in any of the books I have searched, or online. Can anyone
share their brilliant knowledge please? Thank you!I can't thank you enough for replying; you have to forgive me
for my coding illiteracy, this is my very first project in Flash.
I searched some and realized that having a movieclip of the
photoalbum is better than having an external .swf file, so I will
go with your second way of linking the album.
I created a button for the album, and I have converted the
.swf photoalbum into a movieclip symbol that I see in my library
now (named it photos). But I can't assign an instance to it - when
I click on it from the library I get a new 'scene' on the stage
with all the photoalbum layers, and there is nowhere where I can
name an instance. So instead I inserted a movieclip symbol on a new
layer of my .fla site, but as soon as I do it I don't see it on the
timeline anymore.
Can you explain what am I doing wrong please, like to a kid?
I am a bit flustered at not being able to figure this out.
THANK YOU VERY MUCH
Liza -
How to Change(Replace) a Flash Movie Icon
Hi Guys,
I have created a flash movie for my company and I have been asked to send the swf file with our company Icon instead of regular flash icon.
could you please give me an idea how I can do this?
I really need help regarding this!
Best RegardsIf you are sending a .swf file, or a .fla file, then whoever uses it will determine what the default program to open that file type will be on their machine, which will determine the file type icon it dispays on that machine.
-
How do I tell my flash movie which frames to display depending on the page?
Hi,
I'm creating a php website with a flash movie that
incorporates the navigation. The movie shows an image for each
section and this image doubles as the navigation. The website uses
the same php template throughout the site for each page.
Here's the thing: I would like each page within the site to
display the rollover / active state of the section that the page is
in, rather than the movie playing fully each time the visitors
visits a different page.
The .fla file and .swf can be viewed here:
http://preview.hosts.co.uk/~swinsidelodge-hotel.co.uk/templates/swinside/img/header.fla
http://preview.hosts.co.uk/~swinsidelodge-hotel.co.uk/templates/swinside/img/header.swf
So when a visitor is on a page in the hotel section, I want
the flash movie to play frames 201 to 205 and when in the booking
section frames 221 to 225 rather than the whole movie.
Is there any way of doing this?
Thanks,
KonradThanks Gorka,
I looked it up and found this useful summary:
http://probertson.com/articles/2006/12/14/deep-linking-flash-application-states/
However, I'm now trying to figure out how write the flahs
vars so it can see what section / folder the page is in so that the
swf knows to play the same frames for both
swinsidelodge-hotel.co.uk/pages/hotel/awards.php and
swinsidelodge-hotel.co.uk/pages/hotel/guest-comments.php. So
basically it doesn't look at the last bit of the url but the first
bit... I would like the flash vars to be dynamic so that when the
client adds a new subpage in one of the sections the swf will still
know which frames to play.
Any suggestions?
Thanks,
Konrad -
How do I center my flash movie in dreamweaver
Hi!!
I currently have a behavior assigned to a slice I made in
imageready. In dreamweaver I assigned a pop up browser
window to it...it will be a link to a flash movie(.swf) I
made, but I don't know how to alter the code to make the browser
window centered on the screen!! Right now it opens on the top of
the screen.
Any help will be greatly appreciated.
thanks in advance!!Thanks Gorka,
I looked it up and found this useful summary:
http://probertson.com/articles/2006/12/14/deep-linking-flash-application-states/
However, I'm now trying to figure out how write the flahs
vars so it can see what section / folder the page is in so that the
swf knows to play the same frames for both
swinsidelodge-hotel.co.uk/pages/hotel/awards.php and
swinsidelodge-hotel.co.uk/pages/hotel/guest-comments.php. So
basically it doesn't look at the last bit of the url but the first
bit... I would like the flash vars to be dynamic so that when the
client adds a new subpage in one of the sections the swf will still
know which frames to play.
Any suggestions?
Thanks,
Konrad -
How to import and run little movies made on my primarily still camera?
Camera: Sony DSC-N2
Makes besides photo's (jpeg) also mpeg movies (mov)
Could somebody tell me how to import and run them on my iPad2 ?Hello,
If you want to import them into your iPad without using iTunes you can get an Apple iPad Camera Connection Kit. Otherwise you can first import them into your computer then from your computer to your iPad using iTunes. Once they are on your iPad you can run them from the Videos app on your iPad. -
How to put a Shockwave/Flash movie on to an IMAX screen?
Is it possible to project an animated shockwave movie or Flash movie directly on to an IMAX screen if it were designed to IMAX screen specs without going through Adobe After Effects to render out a Quicktime movie?
Also why would you need to go through After Effects if it is neccessary to do this?
Thank you.1) You would have to find a film converter to know for sure. But, I imagine they will be looking for an MOV, AVI, or, probably more ideally an MPEG
2) I imagine there is, but it is likely a very expensive projector. IMAX Digital uses the DCI format, and two projectors for projecting: http://en.wikipedia.org/wiki/Digital_Cinema_Initiatives
3) You will likely not be able to create a 75-minute long SWF movie. It will have to be broken down into separate animations, and then converted over to a video format and merged.
4) Though I have never seen a hard specification for it, there does seem to be a limit, and it varies depending on the version of Flash you are using. In CS3 I have started having problems once I got to around 11000 frames (or a little less than 10 minutes at 12fps). You will want to be creating your animation at 24, or maybe 48 FPS (both are IMAX specs), which will severely limit the length of time you can animate in a single file.
It does seem like the file length grows exponentially between versions, so CS4 should be able to handle a significantly longer file than CS3 did. The only way to know for sure is to create-create-create, and save multiple versions of all files, save frequently, and go until Flash gives you problems. I fear this will change depending on the specs of your computer, the version of Flash, and the complexity of the animation. -
How Can I Get A Flash Movie to Access Local Files
I have a customer that has created a Flash movie to run off a CD. The movie is basically a set of menus with links to access local files in the same directory as the movie. i.e. Main folder (to be root of CD) has the movie, a Documents folder with PDFs, a Movie folder with wmv and mov files, etc.
The problem arrises when you click on a link to a file, a web browser is launched, and the browser tries to display the target file. The movie was designed on a Windows system, and, mostly it works in a Windows environment, however, the links totally crap out on a Mac because the URLs are pc centric.
He is a rookie flash programmer so I am trying to help him set up proper links to the files, so that the files will (hopefully) launch the proper local app and not a web browers. i.e. if the link points to a PDF, the Adobe Reader is launched; if the link is to a mov file, then QuickTime is launched....
Is there a way to do this? All the tutorials I have found all seem to expect the flash movie to be running on a web server, and as such do not work when running the movie off a CD.
Any help or suggestions would be grealy appreciated.
A response ASAP would also be greatly appreciated as the customer needs to deliver 200 CDs of the project for a presentation tomorrow morning - I have to create the CDs...
TIAHi there,
Maybe you would want to use swfObject, i've been using it for
a long time now.
http://blog.deconcept.com/swfobject/
cheers -
it seems that lodMovie is not working with a target.
Thank youHello Tara,
It's simple, I've developed an animation with Catalyst (took me 2 days...to learn a move forward) and i would like to use that animation inside a flash website. so i'm trying to load the Catalyst swf file animation inside my flash main movie without success !
I"m tryin to do : loadMovie("catalyst_animation.swf", TargetA); TargetA is an empty movie clip located a certain position.
the loadMovie("catalyst_animation.swf", 0); is working but this is not what i want for a clear reason (loading inside and at a certain position).
Thank you for our help. -
How to detect end of flash movie (SWF file) in Javascript
I have used Dreamweaver CS4 to integrate my SWF file as shown
below. So far so good. See GoToNext()
my website
What I wouldd like to do is have the SWF movie trigger a
javascript function in my html page when the video is stopped
playing (i.e. when it is finished) There are no controlls in that
SWF file - it is basically am add banner. I would think this would
be easiest done by rasinng an event in SWF that is communicated to
javascript, where I can add an event listener, and thus trigger my
function.
How can this be done in the simplest way?
<div id="bodyFlash"
class="clearfloat"><p> </p>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="760"
height="150" id="FlashID" title="Chillifire Banner">
<param name="movie" value="flash/chillifire.swf" />
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="swfversion" value="6.0.65.0" />
<!-- This param tag prompts users with Flash Player 6.0
r65 and higher to download the latest version of Flash Player.
Delete it if you don’t want users to see the prompt. -->
<param name="expressinstall"
value="Scripts/expressInstall.swf" />
<!-- Next object tag is for non-IE browsers. So hide it
from IE using IECC. -->
<!--[if !IE]>-->
<object type="application/x-shockwave-flash"
data="flash/chillifire.swf" width="760" height="150">
<!--<![endif]-->
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="swfversion" value="6.0.65.0" />
<param name="expressinstall"
value="Scripts/expressInstall.swf" />
<!-- The browser displays the following alternative
content for users with Flash Player 6.0 and older. -->
<div>
<h4>Content on this page requires a newer version of
Adobe Flash Player.</h4>
<p><a href="
http://www.adobe.com/go/getflashplayer"><img
src="
http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif"
alt="Get Adobe Flash player" width="112" height="33"
/></a></p>
</div>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
</div>
...on the last frame in the banner file you can use the
ExternalInterface class to call a specific JS method, and even pass
data if needed. -
How can I publish my flash movie in one swf file in V.2
Hi
When I publish my movie to flash format , skin swf file is
segregated from main movie swf file . How can I publish my movie
only in one swf file ? I want to merge skin and main movie files
together in one swf file .Hi Corona,
The screen size is whatever you captured or specified during
the recording or new movie setup process. This will cause the
playback control to be placed "on top of" some portion of the
captured background, but there are two ways around that problem.
1) When you set the red recording area before recording, drag
the bottom of the recording area downward about 35 pixels below the
application window (assuming you are capturing an area that
includes a "bottom" or even an application window - grin). For this
to work, it is best if you do your recording against a
solid-one-colored desktop background, so the "extra" area at the
bottom doesn't include desktop images that you don't want in the
capture (even though that area will not be visible in the end ...)
OR...
2) Use the Project > Resize Project dialog to increase the
palette size on the bottom, taking care to leave the original movie
the same size. This will effectively do the same thing as
Suggestion #1, create a "blank" area at the bottom of the movie on
which there is room to mount the playback control bar.
Best of luck, Corona, and omid02. Hope this helps, in
conjunction with the advice that Rick has already offered.
. -
Problem dreamweaver to insert swf flash movie cs6
when i isert in dreamweaver a movie created in flash cs6, i push the bottom of play for preview only show a white frame, the action no have. somebody have the solution plese share. Thanks
I don't see anything obvious in the code, unless there is an issue with the paths. For example, the following path is not likely to be correct:
../../../web140/sitedesigns/bradley/assets/audio/test.swf
But it is impossible to know for certain without seeing the page in its normal location. If you upload the files, including the dependent files, to a Web server we would be in a better position to help you.
Mark A. Boyd
Keep-On-Learnin' :-)
Maybe you are looking for
-
Invoking Siebel CRM OnDemand Web Service via BPEL
I'm trying to invoke a Siebel CRM OnDemand Web Service via BPEL. Basically, the Siebel guide says to post to a url with user/pwd to get a session ID returned from a cookie. I did that using embedded java and have the session ID as a variable in my BP
-
Windows 7 Pro 64-Bit on Early 2008 iMac - No CD/DVD Driver error
Hi, I'm trying to install Windows 7 64-bit on my early 2008 iMac and its failing at the point after I click "Start Install" in the Windows 7 installation. Its complaining that I don't have the required CD/DVD drivers, and prompts me to insert a disk/
-
Pcmanfm can't set programs for file types
I would like set a gpicview for jpg files, but when I set this program in pcmanfm menu - pcmanfm doesn't open jpg with gpicview... after installing thunar - I set gpicview for jpg in thunar and now pcmanfm is opening jpg with gpicview... How change t
-
Ethtool does not show much detail on oracleel5
Dear all, Please give me some advices on this stool as why it did not return a long list of detail? do i need to configure the tool? as i remember, i do not need to do anything after install. it happens with all new install oracle el5. #ethtool eth0
-
Have done the needful, jar file created and settings changed. The icons are shown in the menu tool bar but not on the forms buttons. This is puzzling me... anyone have any ideas on this one?