How to import an existing project into another existing project?

RH10
I will need to bring in all the contents of a smaller WebHelp project into a larger WebHelp project.
I have found some discussion of merging, but I think this is a different matter (unless I am mistaken). I want to permanently incorporate the content of the smaller project into the larger project.
What is the best method for doing this please?
Mike

Hello again
Sure, you can import the topics as a "batch" by selecting many topics at once.
As for the links, I'm thinking that as long as you maintain the relative locations between the linked topics, that all should be fine.
What I mean by the relative locations is to say that if you have a folder structure in the source project, you will need to ensure you have the identical folder structure in the destination. Then ensure the topics are copied to the exact folders.
Cheers... Rick

Similar Messages

How can I [cmd]+A including text boxes? Or how to import one Pages document into another Pages document?

Hi there,
I am working on my thesis with several Pages documents (for the first time). And I really have searched all over the Internet to find an answer to exactly my question but I cannot find it.
First my question was: How can I import one Pages document into another one? I found the answer on that (I think) and there is nothing else than just make a new section and copy/paste it in.
But then another issue pops up: I cannot [cmd]+A my whole document including the texboxes to paste it in the other Pages document. Then the document will be paste without the textboxes (and I have quite a lot of them in that document) and the text will not be at the right place.
So please explain to me: How I can combine two Pages documents and keep them exactly the way they are? Is that even possible?
I thank you so much in advance!

Hi Fruhulda,
I have already tried to mark the textboxes in line but that did not work, and besides then the text and the boxes won't be at the rigt places either. Thank you for your reply .

Importing one Pdf document into another.

I am trying to import one Pdf-document into another using a Reference XObject. I am looking at thePDF- specification, and I thought I was doing things the right way, but its not working. The PDF-specification doesen't have an example of how to do this, only an explanation.
Below is the PDF-file I am testing with (if anyone can be bothered looking at it ). The file embeds another pdf-file, and is supposed to show a part of the embedded file at a certain position.
Again, if anyone can be bothered looking at my PDF and see if they can see what I am doing wrong here I would appreciate it.
(There is nothing wrong with the embedded file itself...)
PDF-file embedding another PDF-file and using a Reference XObject to display the embedded file:
%PDF-1.5
1 0 obj
<<
/Type /XObject
/Subtype /Form
/BBox [0 0 100 100]
/Ref <<
/F (4fa27162e72547a00771606.pdf)
/Page 1
>>
>>
endobj
2 0 obj
<<
/Type /Filespec
/F (4fa27162e72547a00771606.pdf)
/EF <</F 3 0 R>>
>>
endobj
3 0 obj
<<
/Type /EmbeddedFile
/Length 854
>>
stream
%PDF-1.5
1 0 obj
<<
/Length 334
>>
stream
q
1 0 0 1 128.10769621539 70.591821183642 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 -128.10769621539 -70.591821183642 cm
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
0 0.89 0.89 0.05 scn
0.2743205486411 w
2.743205486411 M
0 J
0 j
-1.9202438404877 -2.6517653035306 260.05588011176 146.48717297435 re
h
B
Q
endstream
endobj
2 0 obj
<<
/Type /Page
/Parent 3 0 R
/Resources <<
/Font <<>>
/XObject <<>>
>>
/MediaBox [0 0 255.11811023622 141.73228346457]
/Contents [1 0 R]
>>
endobj
3 0 obj
<<
/Type /Pages
/Kids [2 0 R]
/Count 1
>>
4 0 obj
<<
/Type /Catalog
/Pages 3 0 R
>>
endobj
xref
0 5
0000000000 65535 f
0000000010 00000 n
0000000401 00000 n
0000000568 00000 n
0000000624 00000 n
trailer
<<
/Size 5
/Root 4 0 R
>>
startxref
679
%%EOF
endstream
endobj
4 0 obj
<<
/Length 322
>>
stream
q
1 0 0 1 93.268986537973 71.826263652527 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 -93.268986537973 -71.826263652527 cm
55.961391922784 45.628651257302 74.615189230378 52.39522479045 re
W n
1 0 0 1 55.961391922784 42.062484124968 cm
74.615189230378 0 0 55.961391922784 0 0 cm
/XobjectPDF1 Do
Q
endstream
endobj
5 0 obj
<<
/Type /Page
/Parent 6 0 R
/Resources <<
/Font <<>>
/XObject << /XobjectPDF1 1 0 R >>
>>
/MediaBox [0 0 255.11811023622 141.73228346457]
/Contents [4 0 R]
>>
endobj
6 0 obj
<<
/Type /Pages
/Kids [5 0 R]
/Count 1
>>
7 0 obj
<<
/Type /Catalog
/Pages 6 0 R
>>
endobj
xref
0 8
0000000000 65535 f
0000000010 00000 n
0000000144 00000 n
0000000238 00000 n
0000001172 00000 n
0000001551 00000 n
0000001738 00000 n
0000001794 00000 n
trailer
<<
/Size 8
/Root 7 0 R
>>
startxref
1849
%%EOF

PDF is a binary format. The most important piece in a PDF file is the cross
reference table. It contains byte offsets to the different objects in a
file. If you insert just one space (which in a true ASCII file will not
change much), you are making all byte offsets after the insertion point
invalid. They now all point to something different than the start of an
object.
Because there is no standard about how line endings are encoded in text
files, every time may add (or subtract) a byte - depending on what computer
system and what editor you use to convert your PDF to fake-ASCII, and then
again what I use to try to convert it back to PDF. If you are using a
Windows system and I'm using a Mac, the cross reference table gets
corrupted. And that's even before the web server does it's magic and
potentially adds data.
If you want somebody to look at your file.
Have you looked at the post I linked to? The settings in Acrobat are
important. You need to enable Reference XObjects, AND you have to declare
the directory where your target file is stored as trusted.
From what I can see in your PDF code, you are doing a whole bunch of cm
operations. You may want to consolidate all those into one operation. I
have not done a detailed analysis, but you could potentially shift your
data off the page. Keep it simple and see if that makes a difference.
Karl Heinz Kremer
PDF Acrobatics Without a Net
[email protected]
http://www.khkonsulting.com

How to import a PDF form into FormsCentral

Hi,
Please help me in How to import a PDF form into FormsCentral.
Thanks,
Techvedic

Hi Techvedic,
Import of form in Formscentral depends on how it was created. If you used LiveCycle designer to create the original form then it cannot be imported. However, if the form is created in Acrobat then you can import it by clicking on Import PDF form under Create New form heading.
Note: In the imported form you may edit the position of the submit button, but other design edits to the imported form will need to be made in the tool used to create that form.
Hope that helps, let me know if you have any other question.
Regards,
~Pranav

I am looking for assistence how to import an existing website in Dreamweaver CS4

I need help to import an existing website in Dreamweaver CS4

Only have one Dreamweaver CS4 installed, trying to get my DW CS4 disk I
bought installed on computer (done) I only need to figure out how to link
my website to the DW CS4 on my second computer.
L. Francesca Ferrari, L.Ac., DTCM, DMQ (China)
Ferrari Center of Chinese Medicine
222 Forest Avenue
Pacific Grove, CA 93950
831.818.3993
www.francescaferrari.com
L. Francesca Ferrari, L.Ac., DMQ (China)
Department Chair Medical Qigong Science
Five Branches University
This message, together with any attachments, is intended only for the use of
the individual or entity to which it is addressed and may contain
information that is confidential and prohibited from disclosure. If you are
not the intended recipient, you are hereby notified that any dissemination,
or copying of this message, or any attachment, is strictly prohibited. If
you have received this message in error, please notify the original sender
immediately by telephone or by return e-mail and delete this message, along
with any attachments, from your computer.
From: "Nancy O." <[email protected]>
Reply-To: <[email protected]>
Date: Sat, 04 Sep 2010 18:34:03 -0600
To: Francesca Ferrari <[email protected]>
Subject: i am looking for assistence how to import an existing
website in Dreamweaver CS4
>> I do not know where the site files are. They are on my initial Mac laptop
>> computer, and I use Hostway as my server.
Do you mean you lost your local copy of your site files from on an old
computer?
Log-in to your Remote Server and GET the site files using DW or your favorite
FTP application (Cute, Filezilla, WS_ftp, etc....)
>> But I was distinctly told my the call yesterday with Adobe that I must have
>> CS5 to get my website, www.francescaferrari.com with Dreamweaver on my
>> second computer.
Which version of DW did you have before?
How many installations of DW did you have? You can have up to 2 at a time.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
>

How to import a XML file into the document?

Hai,
i had created a table using xml file....
Now i want to import that xml file tabel into the document...
Can any one tell me how to import the xml file into the document?
thanks
senthil

Hai...
this is senthil...
i'm beginner for creating adobe indesign plugins..
i want to import a html file in the document...
i want to create a table by using html tags and
that table will be imported into the document..
How shall i do it?
can any one plzz explain me?

How to import a PSD file into Indesign WITH layers so it can be edited/saved as an InDesign file?

How to import a Photoshop file into Indesign CS6 so that it's layers show in InDesign and it can then be edited/saved as an InDesign file?

MyTienN wrote:
Someone had mentioned the possibility of saving each individual layer in Photoshop as a png file and importing into Indesign and adjusting it in there
What do you mean by "adjust"? Editing of Photoshop images should be done in Photoshop.
Sure, it's possible to save individual layers from an image in Photoshop as inidvidual files in a variety of formats, but what's the point? You could just as easily import the layered file, then copy/paste it into a new layer for each layer in the image and use layer visibility to control which ones show. I don't think that will do you a lot of good, though, if you use adjustment layers or opacity controls on the layer in Photoshop.

How to import the internal table into subroutine as parameter

how to import the internal table into subroutine as parameter, and its structure can be recognized inside the subroutine

Hi Yong,
try this:
parameters: p_tabnm like dd03l-tabname.
field-symbols: <fs_tabname> type standard table.
data: itab_ref type ref to data.
create data itab_ref type standard table of (p_tabnm)
                     with default key.
assign itab_ref->* to <fs_tabname>.
select * from (p_tabnm) into table <fs_tabname>.
perform subroutine tables <fs_tabname>
                   using p_tabnm.
*&      Form subroutine
      text
     -->P_<FS_TABNAME> text
     -->P_P_TABNM text
form subroutine tables   p_tabname type standard table
                 using    p_tabnm.
Here p_tabname already has the structure of the table you gave as input
parameter
endform.                    " subroutine

How to import multiple vcard contacts into iphone4

How to import multiple vcard contacts into iphone4

I had a Nokia C6-01 and had to import the contacts to my Iphone 4S. This is how I did it
1. Open Nokia Suite and Click on Contacts
2. Select all contacts. Click on File -> Import Contacts .Specify the folder that you are creating . For ex: C:\vcards.
Now you have multiple .vcf files in this folder.
To combine the multiple .vcf into a single .vcf
a . Open command line interface (click Start -> Run, or windows button + r and type cmd to launch it).
b. Navigate to the folder where multiple vCard files are by entering cd "C:\vcards", if the folder is there.
c. Enter the command copy /a *.vcf combinedfile.vcf in the command prompt.
3. Now add this file as an attachment and mail it to your email address. Open the email on your iphone and click on the attachment.
4. It will prompt you to add the contacts. Now you have all the contacts on your Iphone.

How to retrive one table records into another table by multiple records

how to retrive table X records into another table Y by multiple records (means at once i want display 10 records) in form 6i .
when i am written cursor it is ftching only one record.But i want to display all records at once.
Declare
Cursor cur_name is
select PROTOCOL_NO,DOCNUM,SUBSETSN,REPEATSN,AESEQ,AETERM from coding_ae WHERE PROTOCOL_NO='KP229';
Begin
open cur_name;
loop
fetch cur_name into :PROTOCOL_NO,:DOCNUM,:SUBSETSN,:REPEATSN,:AESEQ,:AETERM;
exit when cur_name%notfound;
next_record;
end loop;
close cur_name;
End;

Hi,
Make sure the cursor is in the detailed block. For that use 8GO_BLOCK* built-in. So the code will be
Declare
Cursor cur_name is
select PROTOCOL_NO,DOCNUM,SUBSETSN,REPEATSN,AESEQ,AETERM from coding_ae;
Begin
GO_BLOCK('<detailed_block_name>');
open cur_name;
loop
fetch cur_name into :PROTOCOL_NO,:DOCNUM,:SUBSETSN,:REPEATSN,:AESEQ,:AETERM;
exit when cur_name%notfound;
next_record;
end loop;
close cur_name;
End;Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly

How to import an assignment block into a word document

hi all,
how to import an assignment block into a word document ,actually we an option called import to Excel,
but i don't know make it for Word document.....
Regards
Sunil Kumar SA

Use the Media Browser in Word, which you can access via the Ribbon (Insert -> Picture) or via the Insert menu.
Regards
TD

How do you insert a picture into another picture?

How do you insert a picture into another picture. For example, one person is missing from family photo & I'd like to insert that person's face.

By using an external editor:
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

How to import an Engage interaction into Captivate 6?

Can someone please advise how to import an Engage interaction into Captivate 6?

Welcome to the forum,
Articulate Engage interactions are still AS2, if it hasn't changed recently since I checked last time. This means that you cannot insert them as an animation. However, you should search on the Articulate forum (always pointed at so much better than this one ) because there is an explanation how you can insert them as webobjects.
If this still is indeed AS2, too bad, but Articulate should urgently upgrade to AS3,
Lilybiri

How to import cache from Chrome into Mozilla FireFox?

How to import cache from Chrome into Mozilla FireFox?

Not something that anyone usually attempts. If you use Firefox it builds up its own cache. I am not even sure Chrome uses the sametypeof cache files. Are there particular problems you are trying to solve ?

How you import essbase users list into Hyperion reports?

How you import essbase users list into Hyperion reports?

I don't think this is a standard feature of Hyperion Reports.
Why do you need to see all the users in a report. Administrators can always query EAS, Shared Services or MaxL.
Brian Chow

How to import the existing project in the CVS to the weblogic workshop??

Hi,
I have a project in the CVS and I want to work with that project in the weblogic8.1 workshop.
Can anyone help me in importing the existing CVS project/application into the weblogic workshop so that I can check-in, check-out and debug the application.
Thanks in advance
Raj B.

Hi,
If you want to rename Development Component (DC) project, here is the procedure..
How to rename local Development Component Projects in Netweaver Developer Studio
Regards,
Uday.

How to import an existing project into another existing project?

Similar Messages

Maybe you are looking for