How to import an mp3 into garageband as a track?-having some trouble with this.

I tried to drag and drop an MP3 file (created from a wav file using Audacity) into the track/timeline area to no avail. any suggestions?

jjazz52 wrote:
I tried to drag and drop an MP3 file into the track/timeline area to no avail. any suggestions?
http://www.bulletsandbones.com/GB/GBFAQ.html#mp3wontimport
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Having some trouble with importing audio and editing it in iMovie (iLife '11)

Hey guys. Hopefully some of you will be willing to help me with my problem.
Basically I have a video that I've imported into iMovie just fine, and I have a separate audio file that I want to lay over the video. I've figured out how to do this (throw the audio clip into iTunes, then import audio from the iTunes library browser within iMovie). My problem is that I want to have the audio clip I've imported from iTunes come in at a certain point on my video clip, and I want to completely mute the video's sound so that I can ONLY hear the audio clip I've imported from iTunes when that starts playing.
If anyone can help me on how to do this, or if I was confusing and anyone needs clarification please let me know and I'll do my best to replay as quickly as possible.
Thank you very much for any and all input!

Drag your audio track from the Music Browser directly onto the point on your video clip where you wish the audio to start. Don't drag it into the background, but onto the clip thumbnail in your Project. I'm assuming that you have already created a Project and dragged clips from the imported Event. All the editing has to be done in the Project - not the Event.
You will now see a green bar (ribbon) beneath the clip thumbnails, representing the inserted audio. If you click on the small waveform icon at the lower right below the Project thumbnails panel, the audio waveforms will appear (coloured light and medium blue).
You can slide the audio back and forth. You can trim the ends by hovering the playhead (red vertical line) over either end of the green bar until you see a cross-hair icon - click and drag inwards or outwards (subject to audio being available at either end). You can also click on the small gear icon at the start of the audio track and select Clip Trimmer - here you can trim the ends by dragging the yellow handles whilst viewing the corresponding video.
You can split the audio - place the playhead at the proposed split point on the highlighted audio track, right-click (or Control-click) and select Split Clip from the pop-up menu.
If you click on the small gear icon at the start of the track, you can select the Clip Inspector. Click on Audio Adjustments. Otherwise just double-click the green bar and select Audio from the Inspector. In the Inspector you have many choices for editing audio, such as, volume levels, ducking, fading, enhancement, equalizer settings and so on.
You can mute the original audio by double-clicking the video track (or using the gear icon), then reducing the volume in the Inspector's Audio tab. Another way is to use the Ducking feature. Open the Inspector for your added audio track and move the Ducking slider to the zero position - this will mute all other tracks running in parallel with the track you've inserted.
You can easily fade audio tracks in and out without using the Inspector. Open the waveforms by clicking on the waveform icon (as described earlier). At each end of an audio track you will see a small greyish coloured box as you hover over that area. Click and drag as far as you want to create an audio fade. As you do this you will see the waveforms drop in volume.
You can also select sections of audio in the audio track. In the bottom half of the audio track (with waveforms selected) click and drag to surround the selection with a yellow border. Now you can click on the volume line to adjust the volume up or down for that section. Drag the yellow dots to extend or reduce the fade on either side of the selection.
Hope this helps! I think I've covered the essentials.
John
Message was edited by: John Cogdell

How do I import a song into GarageBand from 'Music'

how do I import a song which is in 'music' on my iPad into 'GarageBand' on the same iPad - I do not use the Cloud currently but I should not need to for this simple import (sorry, just starting to use the iPad today for the first time) thx

I believe at the moment the only way to import new samples into GarageBand is via the File Sharing feature of iTunes when it is connected to a computer. iCloud won't help as each app is sandboxed and can generally only access its own files. Transfer of data between apps is possible but is tightly controlled and mediated by iOS rather than by simply sharing files between applications as you would on a computer.
tt2

How to import .pdf files into iBooks?

How to import .pdf files into iBooks?

Or send the file from your computer to your ipod by emailing yourself the pdf. Then if you open the Mail client and you open the pdf there is an option to select open in ibooks. It will save it to your device for remote viewing.

How to import epub/pdf into macvericks' ibooks ?

how to import epub/pdf into macvericks' ibooks ?

Placing the PDF into an InDesign document shouldn't be a problem, but if it is, please post back. What I think you're asking for is how to edit a PDF with InDesign, which can't be done. You would need the source document, edit that and then export to another PDF (if PDF is the end goal). There are some programs that can edit PDFs or convert PDFs to other formats (Word, InDesign, etc.), and they will work to one extent or another. You should expect to have to rework parts of it should you go that way. Keep in mind that PDF is generally considered a final document that isn't intended to be edited.

How to import the IDOC into Seeburger BIC mapping designer

Hi All,
Can u please tell me how to import the IDOC into Seeburger BIC mapping desginer.
I have scenario My scenario is SAP GTS 7.0.....>Seeburger BIS.....>Atlas customs system for Germany
Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send
to Atlas systeam.
Regards,
Ramesh.

Hi Ramesh
BIC is a tool from Seeburger to transmit the XML data to EDI and EDI to XML.
Seeburger mapping programs for transferring the XML data to EDI data and EDI data to XML data, but not for the structure changing, in the IR your mapping program is same.
Receiver side you need AS2 Adapter for converting data to EDI target structure. we have many EDI versions are available, for converting the EDI to XML or vice versa AS2 gives some default mapping programs, xml to EDI or EDI to XML convertion done through this mapping programs.
Seeburger AS adapter provider provides some mapping programs(for example EDI4010 version or other), if you are using the same EDI version(4010) then you can use that mapping programs, if the version is different then we can manually generate the Seeburger X2E and E2X mappings for the corresponding version and signal(850 or 810 or ..), for this seeburger provides the mapping designer tool (BIC), there we can develope the X2E and E2X mapping programs and configure this in the Seeburger work bench.
Regards
Ramesh

How to import csv data into Oracle using c#

Hello,
How to import csv data into Oracle using c #. Where data to be imported 3GB in size and number of rows 7512263. I've managed to import csv data into Oracle, but the time it takes about 1 hour. How to speed up the time it takes to import csv data into oracle. Thank you.
This is my code:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Diagnostics;
using System.Threading;
using System.Text.RegularExpressions;
using System.IO;
using FileHelpers;
using System.Data.OracleClient;
namespace sqlloader
class Program
static void Main(string[] args)
int jum;
int i;
bool isFirstLine = false;
FileHelperEngine engine = new FileHelperEngine(typeof(XL_XDR));
//Connect To Database
string constr = "Data Source=(DESCRIPTION=(ADDRESS_LIST="
+ "(ADDRESS=(PROTOCOL=TCP)(HOST= pt-9a84825594af )(PORT=1521 )))"
+ "(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=o11g)));"
+ "User Id=xl;Password=rahasia;";
OracleConnection con = new OracleConnection(constr);
con.Open();
// To Read Use:
XL_XDR[] res = engine.ReadFile("DataOut.csv") as XL_XDR[];
jum = CountLinesInFile("DataOut.csv");
FileInfo f2 = new FileInfo("DataOut.csv");
long s2 = f2.Length;
int jmlRecord = jum - 1;
for (i = 0; i < jum; i++)
ShowPercentProgress("Processing...", i, jum);
Thread.Sleep(100);
if (isFirstLine == false)
isFirstLine = true;
else
string sql = "INSERT INTO XL_XDR (XDR_ID, XDR_TYPE, SESSION_START_TIME, SESSION_END_TIME, SESSION_LAST_UPDATE_TIME, " +
"SESSION_FLAG, VERSION, CONNECTION_ROW_COUNT, ERROR_CODE, METHOD, HOST_LEN, HOST, URL_LEN, URL, CONNECTION_START_TIME, " +
"CONNECTION_LAST_UPDATE_TIME, CONNECTION_FLAG, CONNECTION_ID, TOTAL_EVENT_COUNT, TUNNEL_PAIR_ID, RESPONSIVENESS_TYPE, " +
"CLIENT_PORT, PAYLOAD_TYPE, VIRTUAL_TYPE, VID_CLIENT, VID_SERVER, CLIENT_ADDR, SERVER_ADDR, CLIENT_TUNNEL_ADDR, " +
"SERVER_TUNNEL_ADDR, ERROR_CODE_2, IPID, C2S_PKTS, C2S_OCTETS, S2C_PKTS, S2C_OCTETS, NUM_SUCC_TRANS, CONNECT_TIME, " +
"TOTAL_RESP, TIMEOUTS, RETRIES, RAI, TCP_SYNS, TCP_SYN_ACKS, TCP_SYN_RESETS, TCP_SYN_FINS, EVENT_TYPE, FLAGS, TIME_STAMP, " +
"EVENT_ID, EVENT_CODE) VALUES (" +
"'" + res.XDR_ID + "', '" + res[i].XDR_TYPE + "', '" + res[i].SESSION_START_TIME + "', '" + res[i].SESSION_END_TIME + "', " +
"'" + res[i].SESSION_LAST_UPDATE_TIME + "', '" + res[i].SESSION_FLAG + "', '" + res[i].VERSION + "', '" + res[i].CONNECTION_ROW_COUNT + "', " +
"'" + res[i].ERROR_CODE + "', '" + res[i].METHOD + "', '" + res[i].HOST_LEN + "', '" + res[i].HOST + "', " +
"'" + res[i].URL_LEN + "', '" + res[i].URL + "', '" + res[i].CONNECTION_START_TIME + "', '" + res[i].CONNECTION_LAST_UPDATE_TIME + "', " +
"'" + res[i].CONNECTION_FLAG + "', '" + res[i].CONNECTION_ID + "', '" + res[i].TOTAL_EVENT_COUNT + "', '" + res[i].TUNNEL_PAIR_ID + "', " +
"'" + res[i].RESPONSIVENESS_TYPE + "', '" + res[i].CLIENT_PORT + "', '" + res[i].PAYLOAD_TYPE + "', '" + res[i].VIRTUAL_TYPE + "', " +
"'" + res[i].VID_CLIENT + "', '" + res[i].VID_SERVER + "', '" + res[i].CLIENT_ADDR + "', '" + res[i].SERVER_ADDR + "', " +
"'" + res[i].CLIENT_TUNNEL_ADDR + "', '" + res[i].SERVER_TUNNEL_ADDR + "', '" + res[i].ERROR_CODE_2 + "', '" + res[i].IPID + "', " +
"'" + res[i].C2S_PKTS + "', '" + res[i].C2S_OCTETS + "', '" + res[i].S2C_PKTS + "', '" + res[i].S2C_OCTETS + "', " +
"'" + res[i].NUM_SUCC_TRANS + "', '" + res[i].CONNECT_TIME + "', '" + res[i].TOTAL_RESP + "', '" + res[i].TIMEOUTS + "', " +
"'" + res[i].RETRIES + "', '" + res[i].RAI + "', '" + res[i].TCP_SYNS + "', '" + res[i].TCP_SYN_ACKS + "', " +
"'" + res[i].TCP_SYN_RESETS + "', '" + res[i].TCP_SYN_FINS + "', '" + res[i].EVENT_TYPE + "', '" + res[i].FLAGS + "', " +
"'" + res[i].TIME_STAMP + "', '" + res[i].EVENT_ID + "', '" + res[i].EVENT_CODE + "')";
OracleCommand command = new OracleCommand(sql, con);
command.ExecuteNonQuery();
Console.WriteLine("Successfully Inserted");
Console.WriteLine();
Console.WriteLine("Number of Row Data: " + jmlRecord.ToString());
Console.WriteLine();
Console.WriteLine("The size of {0} is {1} bytes.", f2.Name, f2.Length);
con.Close();
static void ShowPercentProgress(string message, int currElementIndex, int totalElementCount)
if (currElementIndex < 0 || currElementIndex >= totalElementCount)
throw new InvalidOperationException("currElement out of range");
int percent = (100 * (currElementIndex + 1)) / totalElementCount;
Console.Write("\r{0}{1}% complete", message, percent);
if (currElementIndex == totalElementCount - 1)
Console.WriteLine(Environment.NewLine);
static int CountLinesInFile(string f)
int count = 0;
using (StreamReader r = new StreamReader(f))
string line;
while ((line = r.ReadLine()) != null)
count++;
return count;
[DelimitedRecord(",")]
public class XL_XDR
public string XDR_ID;
public string XDR_TYPE;
public string SESSION_START_TIME;
public string SESSION_END_TIME;
public string SESSION_LAST_UPDATE_TIME;
public string SESSION_FLAG;
public string VERSION;
public string CONNECTION_ROW_COUNT;
public string ERROR_CODE;
public string METHOD;
public string HOST_LEN;
public string HOST;
public string URL_LEN;
public string URL;
public string CONNECTION_START_TIME;
public string CONNECTION_LAST_UPDATE_TIME;
public string CONNECTION_FLAG;
public string CONNECTION_ID;
public string TOTAL_EVENT_COUNT;
public string TUNNEL_PAIR_ID;
public string RESPONSIVENESS_TYPE;
public string CLIENT_PORT;
public string PAYLOAD_TYPE;
public string VIRTUAL_TYPE;
public string VID_CLIENT;
public string VID_SERVER;
public string CLIENT_ADDR;
public string SERVER_ADDR;
public string CLIENT_TUNNEL_ADDR;
public string SERVER_TUNNEL_ADDR;
public string ERROR_CODE_2;
public string IPID;
public string C2S_PKTS;
public string C2S_OCTETS;
public string S2C_PKTS;
public string S2C_OCTETS;
public string NUM_SUCC_TRANS;
public string CONNECT_TIME;
public string TOTAL_RESP;
public string TIMEOUTS;
public string RETRIES;
public string RAI;
public string TCP_SYNS;
public string TCP_SYN_ACKS;
public string TCP_SYN_RESETS;
public string TCP_SYN_FINS;
public string EVENT_TYPE;
public string FLAGS;
public string TIME_STAMP;
public string EVENT_ID;
public string EVENT_CODE;
I hope someone can give me a solution. Thanks

The fastest way is to use external tables or sql loader (sqlldr). (If you use external tables or sql loader, you don't use C# at all).

How to import one photo into iphoto 11

how to import one photo into iphoto 11 in the exact order i want it?

How many orders do you need to import one photo?
Perhaps you need to explain that again
Regards
TD

How to import jsf libraries into eclipse

hi,
i want to run jsf applications in eclipse......
i installed tomcat, j2sdk, eclipse, and tomcat plugin.... and configured everything....now i want to excute jsf applications in eclipse...how to import jsf libraries into eclipse....
plz help me

ok thank u
i have other doubt
i am using tomcatplugin instead of myeclipse plugin
is tomcat plugin supports jsf or not?

How to import maven projects into jdev

Hi.
i have maven project created in other than jdev IDE.i am trying to import maven project into jdev.
i configured maven in jdeveloper 11.1.1.4 with help manu check for updates.
i am follwoing the [how to import maven project into jdev|http://www.oracle.com/technetwork/developer-tools/jdev/maven11g-090173.html#4]
after updating my jdev with maven extensions,i could not see maven project in file|import project menu.
why maven project is not appearing in jdev 11.1.1.4. file|import project menu ?
please help appriciate your help

Though it's not clear in that link, I believe those instructions to be for JDev 11.1.2.1.0, not 11.1.1.4.0. However somebody may correct me.
CM.

How to import VLC downloads into final cut?

my new final cut express does not accept VLC trailers which i downloaded ,
can i transform VLC into Quicktime?

i checked again
those downloads i made with VLC
actually are WMV (they only look like VLC
so th question is :
how cani import those WMVs into final cut express?
thx for responding

How to import LDAP users into OSM users?

Can you please guide how to import LDAP users into OSM users?
Regards,
Menaka

Hi Menaka,
Refer http://docs.oracle.com/cd/E35413_01/doc.722/e35414/adm_security.htm u would find the necessary soultion.
Thanks..

How to import legacy data into apex tables

Hi All,
Please tell me How to import legacy data into apex tables.
Thanks&Regards,
Raghu

SQL WorkshopUtilitiesData Workshop...
you can import the data from already exported as (text/csv/xml) data
Note: the table name and column name should be equal if the table already Existing table.

How to Import Shake scripts into FCP?

Hello,
There may be info here on the Forum, but I wanted to ask this anyway: I've made a Shake script and a File Out Node and rendered that, but when I go to FCP I can't import, or Open that file. I did make it a Quicktime file, but I'm sure that I'm missing something. Could someone tell me how to import Shake comps into FCP? Thanks!

I guess I'm not sure what you mean, then - You can't render to a "script" file.
What format was was the QuickTime file you produced with your File Out node? Are you trying to do something with an Alpha Channel? If so, you could use the Animation codec with colors set to Millions+ or a TIFF sequence (or PNG), or maybe ProRes 4444, but I don't know if Shake can output to that codec.
More detail please,
Patrick

How do you get instruments into garageband i.e. violin, sax etc.

how do you get instruments into garageband i.e. violin, sax etc.

You can install additional sound fonts, see GarageBand '11: Play Soundfonts in GarageBand
or install Jam Packs: If you buy (for a moderate fee) Mainstage 2 at the AppStore, this will install all five JamPacks, so that the loops and instruments can be used with GarageBand. This way you will get all Symphonie orchestra instruments, World Music, Rhythm Section and many more.

How to import an mp3 into garageband as a track?-having some trouble with this.

Similar Messages

Maybe you are looking for