How to import DU to Cloud system via cockpit?

Hi,
I am trying to import the DU to HANA cloud system via link in cockpit - SAP HANA Life Cycle management.
While importing from File, it gives the error "Activation failed atleast for 1 object"
Do we have to create schema for the DU in studio before we start the import from cockpit??
Please let me know.Because in studio, before importing the DU, we create the schema and start the import.
Is the same procedure to be followed  for cockpit also?
Regards,
Indhu.

Hi Indhu,
first of all "SAP HANA Life Cycle management" is not "(HCP cloud) cockpit", but another tool provided by HANA and linked from cockpit only.
Frankly speaking I don't know how DU import in HANA LM WebUI works. Nevertheless you have always a DB schema. I did always with HANA studio, there is no need to create an addtional schema.
You may connect HANA experts for your question.
Best regards
Xu

Similar Messages

  • How to import data from legacy system to SAP

    How do we import legacy data to SAP system? Iu2019m a trainee on SAP HR,  just wanted a brief description on that in layman terms?
    There are lot of threads related to issue  please use Search forum for Better results before posting the query search the forum for better prospects

    Hi ,
    Conversion of legacy data into SAP can be uploaded using a standard SAP Tool called LSMW ( TCode:LSMW).
    the below link gives a brief explanation of the LSMW tool
    http://tutorialsap.com/abap/sap-lsmw-tutorial-with-steps-to-create.html
    There are various methods to upload data within LSMW. If the number of records are very high like Article Master or  Conditions for Retail the IDOC method must be used.
    Standard IDocs
    1. Article Master - ARTMAS
    2. Conditions - COND_A
    3. Source list - SRCLST
    4. Customer Master or WRF3/WRF6 tables - DEBMAS
    5. Vendor master- CREMAS
    Etc. Use transaction code WE60 to see the structure of each of the idocs. New enhancements can be done for the idocs if the required field is not available.
    Regards
    Prabhu

  • How to run Application on another system via WinRS

    hi Guys
    i have setup WinRM on two PCs & it works fine.
    but when i execute the following command to open an application on the remote system (in my LAN & in my subnet)
    nothing happens & cursor continue blinking at cmd windows
    C:\winRS -r:http://10.1.1.3:5985 -u:administrator -p:P@ssw0rd mspaint    ( or notepad) 
    is it possible to open an application on another system ?
    thanks in advanced

    Hi maria.holme1,
    WinRS(Windows Remote Shell) is used to execute a “program” on a remote host. Programs with a user interface, console applications that prompt for input, and console applications that use the Win32 console API, do not work correctly in the Windows PowerShell
    remote host. Considering the notepad and paint include a user interface ,they may work incorrectly in the Winrs.
    Here are links for reference:
    WinRM (Windows Remote Management) Troubleshooting(Pay attention to “What is WinRS?” part)
    http://blogs.technet.com/b/jonjor/archive/2009/01/09/winrm-windows-remote-management-troubleshooting.aspx
    about_Remote_Troubleshooting(Pay attention to” HOW TO INTERRUPT A COMMAND” in the ending part )
    http://technet.microsoft.com/en-us/library/hh847850.aspx
    “is it possible to open an application on another system ?”
    Have you tried to use PsExec?PsExec is a light-weight telnet-replacement that lets you execute processes on other systems, complete with full interactivity for console applications.
    PsExec v2.11
    http://technet.microsoft.com/en-in/sysinternals/bb897553.aspx
    Best regards

  • How to import Canon FS100 footage (.MOD) via Log and Transfer?

    I have a Canon FS100 video camera. I records in standard definition 480p video, and saves the files in the .MOD format. Lately, I've just been using iMovie to edit my videos because it can easily import to files. Final Cut Express cannot, though, as far as I'm aware. What I've been doing is copying the files onto my computer, then using a convertor to convert the MOD files into .MOV files, but then FCE has trouble editing it. It causes it to have to render after each edit. Is there an easier way to edit my video? I've tried converting the MOD files into other formats such as DV video, but it still has the rendering problem. My FS100 doesn't show up in the Log and Transfer window of FCE. Is there a way I can make it appear? Thanks.

    .mod files are a problem. Are you shooting in 4:3 or 16:9 mode?
    What app are you using to convert them ... and what are you converting them to?
    The .moi files are index information associated with the .mod files that contain the actual video.
    MPEG Streamclip should be able to convert the .mod files. You may need the QuickTime MPEG2 Playback Componen, if you don't already have it on your Mac. ($20 download from the Apple Store). (You may need to change the .mod file extension to .mpg then open it in MPEG Streamclip.) If you are shooting 4:3 then in MPEG Streamclip convert the videos to QuickTime using Apple DV/DVCPRO-NTSC compression (this is a selection on the conversion screen).

  • How to import FFox bookmarks into iPad via iTuneon a machine w/o Safari?

    I am running Win 7 with the latest iTunes, and Firefox.
    I want to import my FF bookmarks into Safari running on my iPad2. However, I don't have (or really have a need for) Safari on my Windows Machine.
    Is there a way to import my bookmarks into iTunes w/o having Safari installed on my (Win) machine?
    Don't really need yet another browser. (I also have Chrome installed, which has all my bookmarks, in case it's easier to do it that way.)
    Thanks!

    Thanks all, will try xmarks and report back.
    While we are on the topic of safari on the iPad...where is the setting to set the default zoom level for web pages?
    Every time a page loads, I have to pinch and zoom out so it's readable. Even if I do it once, when I navigate way and come back, it defaults to the tiny font. Can't find anything in Setttings, Safari. Safari itself has no setting at all that I can find.
    Also for the bookmarks, could I just install Google toolbar and Google bookmarks? That seems like it would do the job.
    As you see I'm brand new to iPad.

  • How to import transport of copies to productive systems

    Hello,
    I have been experiencing a problem that even the guys from admin could not solve (yet). I should say I work in a development team.
    Imagine you have two landscapes, one DEV-QAS(1) to develop big projects and a normal DEV-QAS-PRD(2) landscape where my objects will be imported. After a new group of objects is finished in (1), we ask to import the workbench request in the STMS queue of DEV(2). After this, and after some small test, we create a transport of copies in DEV(2) where we include the first transport, release it and import it to the QAS(2) queue. After the tests in QAS(2) the idea would be to import the transport of copies to productive system PRD(2). But it does not work...
    In STMS queue for PRD(2), there is no entry for the transport of copies. Also, when I tried to add the transport request to the import queue (via menu -> Extras -> Other requests -> Add), I get an error message stating that no co-files where found for the transport.
    Does anyone know this problem? I suspect it can have sothing to do with the use of a transport of copies, but, if I don't use this kind of transport, how can I get objects from other systems to production?
    Thanks in advance.
    Davide Sepanas, Portugal

    Davide,
    Re your latest questions:
    > 1) Why this problem with transport of copies doesn't happen from DEV(2) to QAS(2), since these systems are also not in the same transport directory?
    >
    I think the answer is in your original problem description:
    we create a transport of copies in DEV(2) where we include the first transport
    >
    When you create a transport of copies you must indicate a terget system and I suppose you enter QAS(2) there. In that case the TMS will add the request to the import buffer of the target system when you export the request from DEV(2). I understand that you never have to add transports of copies to the import buffer of QAS(2) manually, which proves the TMS does this for you. However, for further imports into systems that are not designated as target system of the transport of copies, like PRD(2), the TMS will do nothing of the sort and you must add the request to the queue yourself - which in your case also means you have to forward the transport files first.
    > Can we assume, then, that, where I was working before, all three systems were configured in the same transport directory, avoiding thus the problem with the transport of copies requests?
    Yes, and that is the most common way of setting up the transport system. Having separate transport systems really only makes sense when sharing the transport directory between the dev, qas and prd systems (via NFS for UNIX, via network shares for Windows) is not possible, either because there is no local network between the servers or because some security policy forbids it. I'd advise you to certainly ask the question to your system admin.
    Regards,
    Mark

  • How to Import an Order via Order Import with multiple shipment lines?

    Good Morning,
    I have a question concerning Oracle's order import functionality. We are importing orders from an outside system and need to consolidate orders by customer id. So if the same customer places 2 orders for different items on the outside system, they should interface to Oracle as a single order to that customer with a shipment line for each ordered item (ex 1.1, 2.1..).
    I know this can be done, but do not know how to implement the solution.
    Can someone please help?
    Thank you!!
    Edited by: user11984882 on Jun 22, 2011 7:03 AM

    Hi,
    I guess that this zip-file contains a transport. This transportfiles have to be copied in the /usr/trans/data und /usr/trans/cofiles and imported by the transaction STMS.
    Thomas Jung wrote how to do this in this: How to import examples from book "Advanced BSP Programming"
    Perhaps your basis administrator can help you to do this?
    Regards,
    Stefan

  • How to import Incoming Payments via DTW

    Hello all,
    I am importing opening balances for Customers via DTW.  My client wants to import all the open Invoices at their original amount, and then import the incoming payments against them to have them net out to the correct remaining balance.  I already know how to import the invoices.  I'm looking at using the PaymentDrafts template in DTW for the Incoming payments but I could use some guidance.  Can anyone provide and example of the data required to both import the incoming payments and apply them to the appropriate AR Invoice?
    Thanks,
    don shields

    hi donald,
    Check this link to resolve ur doubts.
    Import Incoming Payments with DTW
    Import Incoming Payments with DTW
    also check this SAP Note
    Note 1162513 - How to link an Incoming Payment to an Invoice via the DTW
    Jeyakanthan
    Edited by: Jeyakanthan A on Apr 30, 2009 10:31 PM

  • How Can I export a specific Business Attribute set from CRM and send it to SAP Cloud System

    Hi,
    I have a scenario, where I have Business Attributes Set in CRM.
    But I want to send specific (not all ) Business Attribute from CRM to Cloud System (C4C).
    Is is possible via some customization.
    Thanks and Regards,
    Amit Khatwani

    Hi Padma,
    Do we have a standard BADI delievered for this integration from CRM to C4C.
    Or the customer has to implement the custom BADI and enhance the existing
    message type (process)?
    Best Regards,
    Amit Khatwani

  • How to import corrections in to DEV system ?

    Hi All,
    I have to apply the corrections for FI module to my DEV system.
    FI Consultant has downloaded that SAP NOTE in to DEV system thru SNOTE, and its status = can be implemented.
    NOTE = 1015410 has SAR files as attachements and I have downloaded the corrections [SAR files].
    The correctin is for = "Additional Field added for withholding tax codes"
    It has 3 SAR files which contains some new Screens and Screen Elements introduced in the Program = J_1IEWT_PROVISIONS.
    In the Note = 1015410, it is mentioned that " to apply SAR files, refer to Related notes=  480180,13719. "
    Note 480180 says that if it is a correction, " you must follow the installation instructions in the long text of the
    respective SAP note in order to implement the correction in your system ".
    In the NOTE - 13719, it says we need to open the ftp connection to sapservX [userid/pswd=sapservX] and download the data,
    cofiles ?
    Iam not sure how we can do this.
    And i have Uncared the 3 SAR files and i got the following files :
    k003805.CVD - cofile
    R003805.CVD - datafile
    K087494.P7D
    R087494.P7D
    K906169.Q3A
    R906169.Q3A
    In the R/3 DEV server, in /usr/sap/trans,i have a old SAR file = TDS_SAPScript_470.SAR. It had 2 files in it =
    K209581.P6B - cofile
    R209581.P6B - data file
    And K209581.P6B is found in /usr/sap/trans/cofiles/
    But R209581.P6B is not found.
    Does this means that i have to copy the files of the SAR files to /usr/sap/trans/cofiles/ and /usr/sap/trans/data/ ???
    Do i have to copy these files to /usr/sap/trans, and then " tp ADDTOBUFFER ","tp Import ".
    And if i go to correction instruction in the SAP NOTE, i have a Transport Request = CVDK003805 in it. Now what do i have to
    do with that ?
    I have access to OS [hp unix] as root user and also i got access SAP in 000 client.
    Please guide me how i can apply these corrections.
    sap - mySAP ERP ECC 5.0
    Kernal - 640 patch # - 155
    Basis - Package level - 19.
    db - ora 10.2g
    os - hp ux 11.23b ia64
    FI component = SAP_APPL
    LEVEL - 14
    RELEASE - 500
    Regards,
    Shyamsundar G C

    Hi Hariprasad,
    i copied the files to cofiles and data files in my DEV system.
    i tried to do this, iam getting err msg...wht shud i check now.
    tp ADDTOBUFFER K087494.CVD GRD pf=/usr/sap/trans/bin/TP_DOMAIN_GRD.PFL
    ERROR: Parameter for transport request (K003805.CVD) is invalid.
           Either use "ALL" as transport request or
           make sure the fourth character of the transport request is a 'K'.
    ERROR: : transport request parameter is invalid [tp.c,10528]
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0203
    tp finished with return code: 203
    meaning:
      wrong syntax in tp call
    tp ADDTOBUFFER ALL GRD pf=/usr/sap/trans/bin/TP_DOMAIN_GRD.PFL
    ERRORS: Highest tp internal error was: 0247
    tp finished with return code: 247
    meaning:
      addtobuffer has problems with data- and/or cofile
    If i go the STMS_IMPORT in my DEV system, i can see that there is  TR - P6DK105630 which has been imported to my DEV system from a system = P6D. Plz let me know how it is done ?
    Also i have a cofile which i got after UNCAR, which has the same number as that of an existing one....how to copy it now with out overwriting ?

  • How do I set up cloud on my mac when the cloud option is not listed in my system preferences?

    how do I set up cloud on my mac when the cloud option is not listed in my system preferences?

    Welcome to the Apple Community.
    If iCloud isn't in system preferences you will need to update your operating system.
    iCloud is part of iOS 10.7.2 or better.

  • HT4436 I do not have I Cloud on my Mac..I have checked system pref and its not there. how do I add I cloud to my applications?

    I do not have I Cloud on my Mac..I have checked system pref and its not there. how do I add I cloud to my applications?

    Upgrade the computer to at least Mac OS X 10.7.2.
    (78079)

  • How to import payroll result from 3rd party system to SAP

    Hi Experts,
    May i know how to import payroll result from legacy system / 3rd party payroll system into SAP.
    i need to import the payroll result from Jan - April (from 3rd party payroll system) and system go live on May. I using payroll malaysia.
    Thanks.

    check this link
    http://help.sap.com/saphelp_40b/helpdata/en/91/80e9087834d111a4620060b03c3b0e/content.htm

  • Importing photos to my ipad via the camera connector kit  How do I do this

    I cannot import photos to my ipad via the camera connector kit The photo app does not say import anywhere  How do I do this

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • HT204414 how to merge my iPhoto Library into my Photos System Library or how to import photos from iPhoto to Photos?

    Can anyone tell me how to merge my iPhoto Library into my Photos System Library or how to import photos from iPhoto to Photos?

    How many did you trash at one go? iPhoto will baulk and possibly corrupt if you try trash too many at one go. Expereinced users recommend getting rid of them in batches of about 100 or so.
    What's your plan for the remaining images in the iPhoto Library (the 2k photos and 4 videos)?
    Regards
    TD

Maybe you are looking for