How to import DVD with TC error to FCE?

I try to import the DVD to FCE, but it has some problems with the time code. I use the Streamclip. But after few minutes it shows me error as below:
All DVD players shows the DVD corect - I can watch it without any problem. The problem is when I try to import it to FCE. Do you have any ideas, how to solve the problem?

Please tell us more about the DVD, and the settings you are using in MPEG Streamclip.
Is it a commercial DVD?
What file type/codec are you trying to convert the DVD to?
Are you selecting a specific VOB file to convert or just letting MPEG Streamclip convert the entire DVD?

Similar Messages

How do I deal with constant "error loading content" messages?

I'm constantly seeing error messages on my Apple TV (2nd gen) on content I easily watch on my other iDevices. What gives? This thing is rapidly becoming a vy expensive paper weight. Possibly the worst Apple product I've yet purchased. Am I alone in this? What can I do?

You cannot connect to TC using USB.
Plug the TC into the computer using ethernet.
Press and hold the reset button on the TC for about 10sec.. until front led rapidly flashes.. release it.
Open the airport utility and make sure you can locate the TC. Check the disk page that the disk started up without errors.
When you say
Sodrawi wrote:
How do I deal with the error message at my Time Capsule saying "There is a problem to connect to server xxxx-Time-Capsule.local."
I am guessing you mean Time Machine.
If TM still cannot find the TC disk.. reset TM and redo the setup.
Read A4 here.
http://pondini.org/TM/Troubleshooting.html

Import failing with no errors

Import failing with no errors
All it says in logs for each table is
. . skipping table "<table_name>"
It's a full import from a 10.2.03 db into a 10.2.0.3 db

Hi,
"INDEXFILE" , this is parameter is specified, index-creation statements for the requested mode are extracted and written to the specified file, rather than used to create indexes in the database. No database objects are imported.
Due to that that Objects are skipping.
The INDEXFILE parameter can be used only with the FULL=y, FROMUSER, TOUSER, or TABLES parameters.
Else you can perform a two step process as stated by Amardeep.
- Pavan Kumar N

How create 1 dvd with 2 file

how create 1 dvd with 2 file

As you probably know, DVD creation in Compressor and FCPX is very limited – and it only accommodates single tracks.
But there is no reason why you can't put multiple movies on a single timeline in FCP. Separate them with inserted gaps and add chapter markers to provide some level of navigation among them.
Good luck.
Russ

How to import DVD-R movie into Keynote?

I just transferred a video (with audio) from a VHS tape to a DVD-R, using a stand-alone DVD Recorder. Now I need to import this into Keynote. I've tried opening/playing the DVD with iMovie iDVD, and Quicktime but they will not recognize it as a readable file. The only application that I have that even will play the disc is DVD Player.
Any suggestions how I can get this movie into my Keynote presentation will be greatly appreciated.
Thanks.

as log as there aren't copyright issues aren't a problem, something like Handbrake should work to convert the file to something keynote can read.
http://www.versiontracker.com/dyn/moreinfo/macosx/21117

How to import DVD Studio Pro Menu into Motion?

I would like to change the colors of one of the templates in DVD Studio Pro. In particular the .psd menu file. Is there a way to import the .psd file into Motion and change the color. Or maybe there is an easier way of doing this. Any help would be appreciated.

Yes you can. You can import a Motion project file directly into DVD Studio Pro, though when I tried it took a loooooong time (depends on the size and complexity of the project of course). Here's a tutorial on how to do that:
http://www.wonderhowto.com/how-to-use-dvd-studio-pro-4-with-motion-53426/
OR... you can just export your Motion project and import it into DVD SP as a Quicktime file, and put that in the Menu section. Then you can add your buttons and so forth and proceed from there.
I hope this helps. Good luck!

How to import dvd

I just made a dvd with my dvd recorder and would like to put it into iMovie for editing. How do I do this? When I go to File>Import and select the dvd drive, it filters the unusable files and leaves me with nothing. I can play it in DVD Player, just not import it to iMovie.

DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing...
for using the iLife apps, you have to convert'em first, in recommended order, choose one of the following tools/workarounds:
* DVDxDV (free trial, 25$, Pro: 90$)
* Apple mpeg2 plugin (19$) + Streamclip (free)
* VisualHub (23.32$)
* Cinematize >60$
* Mpeg2Works >25$ + Apple plug-in
* Toast 6/7/8 allows converting to dv/insert dvd, hit apple-k
* connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
none of these apps override copyprotection mechanisms as on commercial dvds...
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
be nice to copy rights
... and, next time, try the forum's search-feature...

How to Import DVD content to FCP for editing

My clients always bring us DVDs (both PAL and NTSC formats) for us to insert certain segments into the FCP project.
Questions:
1. We can import the PAL VOB file into FCP PAL project, but the images seems to be broken up in thick horizontal lines. It seems to be related to the interlace but we cannot fix it in FCP, not matter using deinterlace, switch field, de-flicker.
2. No audio can be import in this way.
We cannot digitally import those DVD files into FCP and we can only bring the DVD into FCP using component signals and analog audio through a DVD player.
Any suggestion on how to import the DVD digitally into FCP, both audio and video?
Thanks in advance.
Mike
(rem: those DVDs are most created by other post facilities, they are not encrypted movie DVDs, so this problem is not related to encryption or region codes.)

Did you search the forum for DVD ripping? This is a very common problem and discussed all the time
You have to rip the DVDs to a format that FCP understands like, for instance, DV video
You can use software like DVxDVD a decent commercial product or MPEG Streamclip which is free but requires Apple MPEG Playback Component to make it work

Import finished with few errors...Help understanding it!

Hi all,
Yesterday, I finished to do an import in oracle. I used the impdp command and got few errors after the import was done. Here are some bits from my log. It was very long but I shortened it with the most common errors. I would appreciate your help understanding what does each error mean, and whether there's a solution available.
Thanks!
El sql que falla es:
CREATE TABLESPACE "SYSAUX" DATAFILE SIZE 125829120 LOGGING ONLINE PERMANENT BLOCKSIZE 16384 EXTENT MANAGEMENT LOCAL AUTOALLOCATE DEFAULT NOCOMPRESS SEGMENT SPACE MANAGEMENT AUTO
ORA-39083: Fallo de creación del tipo de objeto TABLESPACE con el error:
ORA-02236: nombre de archivo no válido
El sql que falla es:
CREATE TABLESPACE "IN_SGC_BD" DATAFILE '+DISKGROUP_BD/sgtc/datafile/rsgtc_in_sgt_bd1' SIZE 132120576 LOGGING ONLINE PERMANENT BLOCKSIZE 16384 EXTENT MANAGEMENT LOCAL AUTOALLOCATE DEFAULT NOCOMPRESS SEGMENT SPACE MANAGEMENT MANUAL
Procesando el tipo de objeto DATABASE_EXPORT/PASSWORD_VERIFY_FUNCTION
ORA-31684: El tipo de objeto PASSWORD_VERIFY_FUNCTION ya existe
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/SEQUENCE/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39111: Se ha saltado el tipo de objeto dependiente OBJECT_GRANT:"SYSTEM", ya existe el tipo de objeto base SEQUENCE:"SYSTEM"."SDE_LOGFILE_LID_GEN"
ORA-39083: Fallo de creación del tipo de objeto SYNONYM con el error:
ORA-00995: falta el identificador de sinónimos o no es válido
BEGIN
dbms_resource_manager.create_consumer_group('AUTO_TASK_CONSUMER_GROUP','System maintenance task consumer group','ROUND-ROBIN');COMMIT; END;
Procesando el tipo de objeto DATABASE_EXPORT/SYSTEM_PROCOBJACT/POST_SYSTEM_ACTIONS/PROCACT_SYSTEM
ORA-39083: Fallo de creación del tipo de objeto PROCACT_SYSTEM con el error:
ORA-29393: el usuario JAIMESP no existe o no está conectado
El sql que falla es:
BEGIN
dbms_resource_manager.create_plan_directive('PLAN_DIA','SGTC_USR','',30,NULL,NULL,NULL,NULL,NULL,NULL,NULL,30,600,5,'SGTC_SWITCH',NULL,TRUE,NULL,10240,1800,900,1800);
dbms_resource_manager.create_plan_directive('PLAN_DIA','SGTC_EDITOR','',40,NULL,NULL,NULL,NULL,NULL,NULL,NULL,10,600,10,'SGTC_SWITCH',NULL,TRUE,NULL,512000,1800,600,3600);
dbms_r
ORA-39083: Fallo de creación del tipo de objeto PROCACT_SYSTEM con el error:
ORA-06550: línea 2, columna 72:
PLS-00103: Se ha encontrado el símbolo "CHECK" cuando se esperaba uno de los siguientes:
in like like2 like4 likec between member submultiset
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/TABLE/TABLE
ORA-39151: La tabla "OUTLN"."OL$" existe. Todos los metadados dependientes y los datos se saltarán debido table_exists_action de saltar
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
. . "SIGELEC"."SDE_BLK_37" 4.976 KB 0 filas importadas
. . "SIGELEC"."SDE_BLK_38" 4.968 KB 0 filas importadas
. . "SGC_BD"."BDE_CRECOBJE" 5.234 KB 0 filas importadas
. . "SIGELEC"."D418" 4.851 KB 0 filas importadas
. . "SYSTEM"."DBM_TOPSQL" 6.125 KB 0 filas importadas
. . "SIGELEC"."F100" 5.562 KB 0 filas importadas
. . "SIGELEC"."F101" 5.593 KB 0 filas importadas
. . "SIGELEC"."F102" 14.77 KB 11 filas importadas
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/PROCEDURE/ALTER_PROCEDURE
ORA-39082: El tipo de objeto ALTER_PROCEDURE:"SYSTEM"."GEN_ROLE_SGTC" se ha creado con advertencias de compilación
ORA-39083: Fallo de creación del tipo de objeto PACKAGE_BODY con el error:
ORA-04052: se ha producido un error al consultar el objeto remoto ENLACE.ELPQ_DATOPROY@CRE
ORA-00604: se ha producido un error a nivel 4 de SQL recursivo
ORA-12154: TNS:no se ha podido resolver el identificador de conexión especificado
ORA-39082: El tipo de objeto TRIGGER:"SIGERED"."TR_CTRL_ENERGIZA" se ha creado con advertencias de compilación
ORA-39083: Fallo de creación del tipo de objeto TRIGGER con el error:
ORA-04052: se ha producido un error al consultar el objeto remoto ENLACE.ELPQ_DATOCONS@CRE
ORA-00604: se ha producido un error a nivel 4 de SQL recursivo
ORA-12154: TNS:no se ha podido resolver el identificador de conexión especificado
El sql que falla es:
ALTER TRIGGER "SIGERED"."TR_CTRL_ENERGIZA" COMPILE PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE_TYPE= INTERPRETED PLSCOPE_SETTINGS= 'IDENTIFIERS:NONE'
ORA-39082: El tipo de objeto TRIGGER:"SIGERED"."TR_CTRL_CONCLUYE" se ha creado con advertencias de compilación
El sql que falla es:
BEGIN SYS.DBMS_IJOB.SUBMIT( JOB=> 165, LUSER=> 'SYSTEM', PUSER=> 'SYSTEM', CUSER=> 'SYSTEM', NEXT_DATE=> TO_DATE('2012-05-02 01:00:00', 'YYYY-MM-DD:HH24:MI:SS'), INTERVAL=> 'TRUNC(SYSDATE+1)+1/24', BROKEN=> FALSE, WHAT=> 'dbms_stats.gather_schema_stats(ownname => ''SIGERED'',options => ''GATHER'',estimate_percent => null,method_opt => ''FOR ALL COLUMNS SIZE 1'',cas
ORA-39083: Fallo de creación del tipo de objeto JOB con el error:
ORA-00001: restricción única (SYS.I_JOB_JOB) violada
El sql que falla es:
BEGIN SYS.DBMS_IJOB.SUBMIT( JOB=> 47, LUSER=> 'SIGERED', PUSER=> 'SIGERED', CUSER=> 'SIGERED', NEXT_DATE=> TO_DATE('2012-05-02 01:00:00', 'YYYY-MM-DD:HH24:MI:SS'), INTERVAL=> 'TRUNC(SYSDATE+1)+01/24', BROKEN=> FALSE, WHAT=> 'SIGERED.RDPQ_PROYECTOS.PR_PROCESAR;', NLSENV=> 'NLS_LANGUAGE=''AMERICAN'' NLS_TERRITORY=''AMERICA'' NLS_CURRENCY=''$'' NLS_ISO_CURRENCY=''AMERI
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/POST_SCHEMA/PROCACT_SCHEMA
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/PASSWORD_HISTORY
ORA-39083: Fallo de creación del tipo de objeto PASSWORD_HISTORY con el error:
ORA-01858: se ha encontrado un carácter no numérico donde se esperaba uno numérico
El trabajo "SYS"."SYS_IMPORT_FULL_01" ha terminado con 2249 error(es) en 17:21:02

Hello people,
I just run for the second time a full import, and it said it finished correctly.
The first time I run it, there was a message which said that the import had finished with 2249 errors (I checked my log and not all of them were errors but messages). I checked each single message and only had to solve a couple of things.
I first created a user in response to an ora-29393: user string does not exist or is not logged on.
The second thing I did was to run the utlrp.sql file in response to an ORA-39082. I did this according to this blog.
I know oracle is taking precedence each time I run an import. I don’t know if what I have done is okay or perhaps not all data was imported after all. This is the thread which I posted initially when errors came out.
Any reply is a supply.
Thanks loads

How to import DVDs?

Is it possible to import DVDs into my Itunes? For example I have a DVD of Peter Pan (my DVD player is playing up) so I wanted to import that into Itunes so I can play it on my Apple TV.
Is this possibl? If so, how?
thanks!

Commercial DVDs are encrypted. Breaking that encryption, a necessary first step in copying the DVD, is illegal in the U.S., therefore, the terms of use of these forums prohibit us from discussing software or methods. Sorry.

How to import DVD friend made on Tivo so I can edit in iMovie HD6?

The DVD will play in my G4 Powerbook's DVD player but won't import into iMovie. I have several important DVDs that my friend recorded with Tivo (I don't have Tivo myself) and I need to edit them in iMovie, so I'd be totally grateful if someone could advise me. Thanks!

The standard format of a DVD is mpeg2 which is a final delivery format not intended for editing. The files on the DVD will need converting.
You need to convert the VOB files back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

Disco command line import fails with parser error 7

Hi, we have discoverer version 10.1.2.48.18 installed to multiple environments.
Developers have created eex-file and we try to import it to all the test environments, it goes through fine with some but with some it fails with parser error 7 :
Here is the full error log:
11/13/2008 7:30:22 AM
D:\disco1012\BIToolsHome_1\bin\DIS51ADM.EXE /connect /import oudata_disco.eex /identifier /refresh /preserve_workbook_owner /show_progress /log import.log
oudata_disco.eex:Could not locate the Folder with identifier 'INSTRUCTOR_ASSIGNMENTS1' in the target End User Layer
oudata_disco.eex:An imported Folder had display name 'Dc transactional sales q2' renamed to 'Dc transactional sales q2 1'
oudata_disco.eex:An imported Item Class had display name 'Eval_Delivery_Region' renamed to 'Eval_Delivery_Region 1'
oudata_disco.eex:An imported Item Class had display name 'Quarter' renamed to 'Quarter 1'
oudata_disco.eex:An imported Item Class had display name 'Track List with ALL' renamed to 'Track List with ALL 1'
The Item Hierarchy with identifier 'INSTRUCTOR_ASSIGNMENTS_LAST_REFRESH_DATE_DEFAULT_DATE_HIERARCHY' has not been imported because: There are no items in this hierarchy node
Import completed, but with warnings. Please check the result.
File(s) imported partially :
oudata_disco.eex
11/13/2008 7:36:38 AM
11/13/2008 7:37:29 AM
D:\disco1012\BIToolsHome_1\bin\DIS51ADM.EXE /connect /import oudata_disco_workbooks_84.eex /identifier /refresh /preserve_workbook_owner /show_progress /log import.log
oudata_disco_workbooks_84.eex:A parsing failure has occurred in file 'oudata_disco_workbooks_84.eex'.
Parser error: '7'
The import has failed (your End User Layer has not been modified) - oudata_disco_workbooks_84.eex:A parsing failure has occurred in file 'oudata_disco_workbooks_84.eex'.
Parser error: '7'
If anyone knows what can be teh cause of this please let me know.
thanks,
Nina

Hi,
The most likely cause is that the export file has become corrupted. Are there very big export files?
Another possibility is that Discoverer Administrator has run out of memory while parsing the file.
Rod West

How to import dvd to iMovie ?

How do I import a dvd to imovie ?

Froggylyn wrote:
I just downloaded the iDVD program from …
iDVD is for exporting/making/creating/'authoring' disks, OP asked for importing DVDs....
… I believe it is now a free app.
wrong info - obsolete, not officially supported for +7 years. But NOT 'free' (should be… )

How to play DVDs with QT??

I can't watch DVDs with QuickTime! When the DVD should open, QT says that it can't open it. I hate that! It's so annoying!! Why doesn't it open them!? Someone please answer if you know why!

Hi, Donny,
Sorry, but if you're referring to a commercial DVD, those are copy-protected. Breaking the copy protection is illegal in the US, so discussing ways of doing it are not allowed here (since the US courts have been holding in some cases that even discussing in print such cracking may be illegal). If you're outside the US where such de-encryption is legal (though it's up to you to make sure that your use of the material is legal), search around the net and you'll find places that can provide tools for de-encrypting the files for use.

How to import files with static variables into a block with methods?

i have a problem. is it possible to import files with static variables into tags like
<%!
//here i want to import a file named settings.inc
//whitch is used to set jdbc constants like url,driver,...
private void method() {
private void method2() {
%>
<%@include file="xy"%>//dosn�t work above
//only in <%%>tag

This should be done using either the Properties class or ResourceBundle. Ex.
<%
ResourceBundle resBun = ResourceBundle.getBundle(String resource);
String username = resBun.getString("username");
String password = resBun.getString("password");
// etc
%>

How to import DVD with TC error to FCE?

Similar Messages

Maybe you are looking for