How to import East West Library into Logic

I bought the East West Quantum Leap Symphony Orchestra library and wondering if anyone can tell me how to import it into Logic 9, please help! Thank you!

Hey Mike sorry its just a matter of habit that i say VST, it is the AU version and I am running and Logic 9.1.5 in 32 Bit mode... i think there is something wrong with the auvaltool as it keeps crashing... currently on the phone to apple support atm so will post back here if and when i get the fix for it... Cheers for the help ... Ps EW tech support just told me to uninstall then re-install, as if i hadn't tried that a few times and it still didn't install... so have reverted back to Play version 2 for EW off my Start-up HD so at least i can use them as stand alone device... Thanx again

Similar Messages

  • How to import iTunes XML library into MS Acess database?

    I have exported my iTunes data to a library XML file. When I try to import these data to a MS Access database (without the sound files of course) I only get strange and stupid table entries.
    I would like to use MS Access to create more flexible reports of my music collection.
    Has anyone ever imported iTunes XML files into MS Access successfully?
    P.S. An import solution to OpenOffice.org as alternative is also appreciated.

    In iTunes, you can "Export Song List" and one of the other options is to export as a text file. This actually creates a comma or tab separated values file, which is a lot easier to import into Microsoft stuff than the XML file is.

  • How to import VEC1-3 packs into Logic Pro 9. help plz

    Hello everyone, not sure if this has been answered (couldn't find nothing by searching) but i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
    any help would be appreciated. thank you!

    JSNP77 wrote:
    i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
    There are "free download" EXS presets - look at the bottom of the [home page|http://www.vengeance-sound.com/eng/indexes/indexFreeSounds.html] "Vengeance EXS Presets" and download.
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!

  • How to import an iPhoto library into photos

    I have an iPhoto library onto an external disk. After the update Photos created a new library in the local pictures folder. How can I get the photos from iPhoto's into the new photos library and than move the new library on a external disk?

    You don't. You just open the Library on the External
    Hold down the option (or alt) key key and launch Photos.. From the resulting menu select 'Choose Library'
    Moving Libraries is exactly the same as iPhoto:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit Photos
    2. Copy the Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching Photos. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • How to import the SAP library into the XI / PI

    Dear All
    Thank you for your help and support
    I am not able to get any help from the Help Menu. I think SAP library is not installed in my system
    Is there any way to install the SAP library.. or does anyone has link to download the SAP library and install in my system
    Regards
    Blue

    Can i download the sap xi library to my pc
    refer that thread

  • HT204414 how to merge my iPhoto Library into my Photos System Library or how to import photos from iPhoto to Photos?

    Can anyone tell me how to merge my iPhoto Library into my Photos System Library or how to import photos from iPhoto to Photos?

    How many did you trash at one go? iPhoto will baulk and possibly corrupt if you try trash too many at one go. Expereinced users recommend getting rid of them in batches of about 100 or so.
    What's your plan for the remaining images in the iPhoto Library (the 2k photos and 4 videos)?
    Regards
    TD

  • How do I import my iPhoto library into iMovie?

    For some unknown reason I am not able to import all my pictures and video clips into iMovie. I do not know what is happening to my Mac. What did I do to it ? I still have plenty of storage space on my laptop. I have a Mid 2012 13" Macbook Pro running Mavericks OS X 10.9.4. I almost forgot to mention that iMovie quits unexpectingly when I am in the middle of a video project. Thanks in advance for any help.

    There is no way you would import an iPhoto Library into iMovie. What you can do is access the Library from iMovie.
    So, what exactly are you trying to do, and what goes wrong? What error messages do you get? What version of iMovie and iPhoto?

  • How to import existing jsp project into jdeveloper

    can someone help me how to import existing jsp project into jdeveloper?
    can give me step by step to import..cause i am new for jdeveloper..
    thank you very much

    Well there are two options - if you have a WAR file with the code in it, then you can use the file->import WAR.
    Or you can use the new->Project from source code.
    Note that you'll probably need to do some library settings and some directory setting after that.
    Have a look at this demo for basic steps:
    http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/NBtoJDevProject/NBtoJDevProject.html

  • Importing A-Dat tapes into Logic

    I have lots of 8 –track Adat tapes of recording sessions that I’ve done for the last 10 years or so. The recording session were for various Jazz projects. I have rough mixes from those sessions that I’ve been able to listen to. But, I don’t have a A-Dat player. So the original A-Dat tapes have gone un-used for some time.
    The thought occurred to me that maybe I can import the a-Dat tapes into Logic and mix and master them on my own. The thing is that I’m not totally sure of the “best” way to go about it.
    At the moment, I am using a small Firebox interface. I suppose that I would need to get a larger 8track interface like maybe a Firepod? I would also need to buy a A-Dat machine. I’ve seen these on E-Bay for a couple of hundred. I would imagine that I would take each of the 8 A-Dat track to a separate input on the Firepod, create 8 new audio tracks in Logic, press record in Logic and press play on the A-Dat?
    Is that it? Or is there a proper way to do this that I don’t know about?
    Thanks,
    Morris

    Hi,
    Yes you can definitely import your ADAT tapes into Logic.
    Here's how to solve the issue:
    1.You should buy an ADAT tape machine,make SURE you get the right one,as the newer one recorded at 20bit,and the older(blackface)only did 16bit.This part is crucial.I would probably recommend you get as newer an ADAT machine as possible,and look for low head hours too.
    2.Buy an audio interface that supports the ADAT lightpipe format.Usually this can be from a cheap box to an expensive one.Just make SURE it does support the ADAT standard.
    3.Buy 2 ADAT optical lightpipe cables long enought to connect the ADAT machine to your audio interface.You WILL need both cables to ensure correct digital audio synchronization.
    4.You will need another interface,such as a Unitor8mkii or a Motu MTP/av USB model,in order to slave Logic to you ADAT machine via MMC protocol.Please refer to chapter 19 Synchronization page 605/619 of the Logic Pro reference manual to learn how to sync Logic to the ADAT.
    5.Yes,you would be able to record ALL 8 ADAT channels at once,in one "pass".
    Just make SURE you read the manual in step 4 thoroughly and test your setup BEFORE recording,to ensure you are doing it correctly.
    Cheers

  • Can some please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates?  I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my Mac

    Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates?  I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac.  I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11.  Is that the cause of the problem?  Please advise.  Thanks.

    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.
    Regards
    TD

  • How to import a PDF form into FormsCentral

    Hi,
    Please help me in How to  import a PDF form into FormsCentral.
    Thanks,
    Techvedic

    Hi Techvedic,
    Import of form in Formscentral depends on how it was created. If you used LiveCycle designer to create the original form then it cannot be imported. However, if the form is created in Acrobat then you can import it by clicking on Import PDF form under Create New form heading.
    Note: In the imported form you may edit the position of the submit button, but other design edits to the imported form will need to be made in the tool used to create that form.
    Hope that helps, let me know if you have any other question.
    Regards,
    ~Pranav

  • How to import a XML file into the document?

    Hai,
    i had created a table using xml file....
    Now i want to import that xml file tabel into the document...
    Can any one tell me how to import the xml file into the document?
    thanks
    senthil

    Hai...
    this is senthil...
    i'm beginner for creating adobe indesign plugins..
    i want to import a html file in the document...
    i want to create a table by using html tags and
    that table will be imported into the document..
    How shall i do it?
    can any one plzz explain me?

  • How to import a PSD file into Indesign WITH layers so it can be edited/saved as an InDesign file?

    How to import a Photoshop file into Indesign CS6 so that it's layers show in InDesign and it can then be edited/saved as an InDesign file?

    MyTienN wrote:
    Someone had mentioned the possibility of saving each individual layer in Photoshop as a png file and importing into Indesign and adjusting it in there
    What do you mean by "adjust"? Editing of Photoshop images should be done in Photoshop.
    Sure, it's possible to save individual layers from an image in Photoshop as inidvidual files in a variety of formats, but what's the point? You could just as easily import the layered file, then copy/paste it into a new layer for each layer in the image and use layer visibility to control which ones show. I don't think that will do you a lot of good, though, if you use adjustment layers or opacity controls on the layer in Photoshop.

  • How to import the internal table into subroutine as parameter

    how to import the internal table into subroutine as parameter, and its structure can be recognized inside the subroutine

    Hi Yong,
    try this:
    parameters: p_tabnm like dd03l-tabname.
    field-symbols: <fs_tabname> type standard table.
    data: itab_ref type ref to data.
    create data itab_ref type standard table of (p_tabnm)
                         with default key.
    assign itab_ref->* to <fs_tabname>.
    select * from (p_tabnm) into table <fs_tabname>.
    perform subroutine tables <fs_tabname>
                       using p_tabnm.
    *&      Form  subroutine
          text
         -->P_<FS_TABNAME>  text
         -->P_P_TABNM  text
    form subroutine  tables   p_tabname type standard table
                     using    p_tabnm.
    Here p_tabname already has the structure of the table you gave as input
    parameter
    endform.                    " subroutine

  • How to import multiple vcard contacts into iphone4

    How to import multiple vcard contacts into iphone4

    I had a Nokia C6-01 and had to import the contacts to my Iphone 4S. This is how I did it
    1. Open Nokia Suite and Click on Contacts
    2. Select all contacts. Click on File -> Import Contacts .Specify the folder that you are creating . For ex: C:\vcards.
    Now you have multiple .vcf files in this folder.
    To combine the multiple .vcf into a single .vcf
    a . Open command line interface (click Start -> Run, or windows button + r and type cmd to launch it).
    b. Navigate to the folder where multiple vCard files are by entering cd "C:\vcards", if the folder is there.
    c. Enter the command copy /a *.vcf combinedfile.vcf in the command prompt.
    3. Now add this file as an attachment and mail it to your email address. Open the email on your iphone and click on the attachment.
    4. It will prompt you to add the contacts. Now you have all the contacts on your Iphone.

Maybe you are looking for