How to Import Garageband projects and files into Cubase for Windows?

Hi
I've recently started using Garageband to record my ideas and compositions. I had 2 main questions:
1. How do I transfer the audio files created in Garageband in a format which will allow me to edit them in Music Software for a Windows based Operating system? Tranferring them to iTunes and then converting them to MP3 doesn't help because then my friends can't edit my guitar parts and other backing tracks.
Mainly I need to know how to save and import Garageband projects and individual tracks into Cubase/ Cakewalk for Windows so that my band guys can edit the tracks and send me their ideas.
I'm the only one out of my friends who has an Apple Macbook and most of my band guys still use Windows based Operating systems.
2. I record my guitars and other instruments using the Digitech GNX4 guitar effects processor as the sound source through USB. While I can record clean guitar without any problem, the moment I switch on the distortions on the GNX 4, there is a loud and constant hum from the speakers. I am therefore not being able to record distorted guitar sounds.
Please help on this.
Thanks and hope to hear from you all.
Cheers
Prash

Tranferring them to iTunes and then converting them to MP3
same as the protools procedure:
http://www.bulletsandbones.com/GB/GBFAQ.html#openinprotools
there is a loud and constant hum from the speakers.
Could be a ground loop problem. Test it using the MacBook on battery power only.

Similar Messages

  • I am trying to import BPM Project.zip file into Oracle enterpriserepository

    I am trying to import BPM Project.zip file into Oracle enterpriserepository from admin tab.
    I am getting the following exception. please help if any one know the solution.
    Performing import...
    Import Failed: Error [100]: An unknown server-side error occurred. Please record stack trace (if available) and contact technical support.
    com.flashline.exception.LoggableException: trouble parsing file in import bundle: SampleWScall/activityGuide.agdl
         at com.flashline.cmee.openapi.service.subsystem.impexp.XMLTranslator.decode(XMLTranslator.java:157)
         at com.flashline.cmee.openapi.service.subsystem.impexp.ImportJob.doJob(ImportJob.java:74)
         at com.flashline.cmee.openapi.service.subsystem.impexp.AbstractJob.perform(AbstractJob.java:75)
         at com.flashline.cmee.openapi.service.subsystem.impexp.JobThread.run(JobThread.java:41)
    Audit results stored in:
    C:\Users\AVINAS~1.YEL\AppData\Local\Temp\import-4705112223687937017.log
    Audit for [Import job.] created on [2012-09-24 11:53:59 IST].
    2012-09-24 11:53:59 IST - Adding Import job with ID=[50403] to job queue.
    Thanks in Advance.

    Hi
    Why are you trying to import BPM zip file are you trying to configure the out of the box workflows?
    They are something that need to be deployed from the process admin on BPM.
    There would be the .exp file you would need as its BPM 10g that you would need to use.

  • How do I import Map Info Tab files into Spatial for a map of europe?

    How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
    So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
    The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
    When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
    This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
    I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
    Any Help welcome :|
    Tim

    Tim,
    MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
    Andy Greis
    CompuTech Inc.

  • How to Import AVCHD 1080/60p Files into Final Cut Pro 7?

    How do I import AVCHD 1080 / 60p Files into Final Cut Pro 7? And if there is no direct way [I certainly haven't found one, but I'm no expert], what additional software would be used? I want to import the files from a Panasonic HDC-HS700 onto an Intel Mac laptop [Mac OSX 10.5.8]? Obviously I don't want to compress & compromise my footage.
    I’m sure a simple, straightforward series of steps would help many people with this issue.
    Thanks!

    Thanks for the response!
    I'm guessing you've found ClipWrap2 to be better than competing products [such as AVCHD Converter for Mac, Toast Titanium, or Voltaic].
    On to the next steps. Using Clipwrap2, would I leave the checkbox "Convert Audio to LPCM" selected or deselected [and what the heck is LPCM?]. In the pulldown menu would I choose "Rewrap (Don't alter video samples)" or do I save a step by choosing "Apple ProRes 422"?
    And finally, am I gaining anything by shooting 1080/60p on this Panasonic HD Camera other than a headache? [Some have suggested this is not a True 60p.]

  • How to import 12 different PPro files into one Encore file to make DVD

    I'm trying to create a DVD with 12 different lessons on it.  I have created 12 Premiere Pro CS4 files (each is a slideshow lessons with narration) and I want to bring them all into one Encore file.  I can send one file to Encore via Dynamic Link - but when I open another PPro file and try to send it to the same Encore folder - it erases the file I put in there previously.  Maybe I'm going about this all wrong - I really don't know.  Please Help.

    Hi Stan,
    Thanks for the reply.
    Since I wanted to get the DVD finished asap - I jumped right into PPro CS4 without going through a learning process first.
    When I said "file" I meant one of the 12 or 13 different PPro projects that I saved to my Desktop...each lesson is different - so I made and saved each lesson separately and placed each of them in a different folder.  Each lesson only has one "sequence" (and I'm not sure what "sequence" means yet).
    These are basically PowerPoint lessons with narration - each lesson containing anywhere from 25-75 pictures or text slides.
    When I opened up one of the lessons in PPro and sent it via DL to Encore - that was fine.  It created an Encore file.  When I opened up the next PPro file and tried to DL to that same Encore file - it appeared to delete or do away with the first file I had sent there.  I could DL each of the 12 or 13 files - but only to its own Encore file.  I couldn't figure out how to get them all into the same Encore file.  But thanks to all the help on this forum - there are now 13 little videos that I can import into the same Encore file.  And that's amazing.
    Thanks for the encouraging words that this project might all fit on the same DVD (I was worred because the files add up to 107 minutes - and I the DVD holds 120 minutes (I think).  I was assuming that after I created a menu and added a picture for the background in the title page, etc., that it would all add up to too much information for one DVD).
    I'll let you know how the DVD turns out.
    Thank you very much.
    ph

  • How to import an Quarkxpress 5 file into Indesign CS3

    Hello,
    I am in trouble when  trying to open with Indesign CS3 for windows a file created with Quarkxpress 5 for Mac. Do you have any hint? (file attached)
    thanks for support

    The Q2ID plugin is really nice as Bob suggested. If you go through there website they will convert your one document and post it for you to download, email you with the results and a discount code. Well worth the money and a very nice company to work with. I can't say enough nice things about their products.
    If you have a newer version of Quark licensed I prefer use their Markztools plugin for Quark to backsave to 4. Seems to be a better conversion with InDesign's Quark import, though that could just be my impression.

  • Need advice on how to import / store existing image files into LR etc.

    Hi,
    I am just beginning to use LR 2.3 and I want to start correctly....
    I have been pondering how to begin and I was hoping some of you might point me in the right direction.
    1. I have all of my RAW files on my Mac's desktop and they are organized at the top level by each of the 2 cameras they were taken with and then the sub folders of each organized chronologically with each subfolder titled by the location or subject of the images matter within each folder.
    I want to import these into LightRoom 2.3 in a manner which will preserve this taxonomy. I also want to convert these RAW images into DNG files on import. How do I set up LR2 to do this?
    2. I want the Lightroom files and the image files to live on my external Caldigit eSATA VR drive. This drive is actually 2 disks set to mirror as hardware RAID 1 so it is essence its own backup if one disk dies. How do I point LR to create and store the DNG files on this external drive and then set LR2 to back up so that the LR datafiles also live there? Would you say this is a good way to set this up or should the LR datafiles ( previews etc. live with LR on the OS drive??
    Is RAID 1 as safe as backing up to 2 different HD's?
    Is it best to convert to DNG ( I like the fact that any LR image data is stored with the DNG and is not a sidecar file which could get seperated) or convert to DNG with orginal RAW file incorporated? How massive do these get?
    Is it best to use LR2's backup utility and exclude the LR data from the Time Machine backup?
    Sory for the long question...

    >1. I have all of my RAW files on my Mac's desktop and they are organized at the top level by each of the 2 cameras they were taken with and then the sub folders of each organized chronologically with each subfolder titled by the location or subject of the images matter within each folder.
    >I want to import these into Lightroom 2.3 in a manner which will preserve this taxonomy.
    >I also want to convert these RAW images into DNG files on import. How do I set up LR2 to do this?
    On the Import Photos Screen, pick "Copy photos as Digital Negative(DNG) and add to catalog" from File Handling drop-down at top of screen.
    If your photos are organised as:
    Photos - Camera 1 ...
    - Camera 2 ...
    then Lightroom will reflect that folder view in its Folders panel. Also, when converting to DNG you get to choose destination folder (answers part of your question 2) and multiple organisation choices including "Organize by Original Folder"
    (Take a look at Chapter 4 of the help file for more information: http://help.adobe.com/en_US/Lightroom/2.0/lightroom_2_help.pdf)
    2. I want the Lightoom files and the image files....
    Create your catalog on that drive. Move your images to that drive before importing them, and when converting to DNG on import, choose a folder on that drive as destination on import screen.
    >Is RAID 1 as safe as backing up to 2 different HD's?
    No. RAID 1 is a simple mirror of 1 drive on another; so if you delete a file on drive, it is also deleted from both drives. Likewise, if a file is corrupted on one drive it will also be corrupted on the mirror. RAID 1 is good as a safeguard against single-drive failure; your data will be available from the remaining drive, but it is not a safeguard against user error or file corruption.

  • How to import data from CSV file into a table by using oracle forms

    Hi,
    I have a CSV file and i want to insert in oracle database in a table by using a button in oracle forms.
    the user can select CSV file by using open dialog .
    can any one help me to find method to make import and select file from the client machine ?
    thx.

    1. create table blob
    CREATE TABLE IB_LOVE
      DOC          BLOB,
      CONTRACT_NO  VARCHAR2(20 BYTE)                NOT NULL
    )2. use the code below to insert:
           INSERT INTO ordmgmt.ib_love
                       (contract_no, doc
                VALUES (:control.contract_no_input, NULL
           lb$result :=
             webutil_file_transfer.client_to_db (:b2.file_name, v_file_blob_name, v_col_blob_name,
                                                 'CONTRACT_NO = ' || :control.contract_no_input);
           :SYSTEM.message_level := 25;
           COMMIT;
           :SYSTEM.message_level := 0;3. use the code below to download
         if :control.CONTRACT_NO_INPUT is not null then
              vboolean :=   webutil_file_transfer.DB_To_Client_With_Progress(
                               vfilename,  --filename                       
                              'IB_LOVE', ---table of Blob item                       
                              'DOC',  --Blob column name                       
                              'CONTRACT_NO = ' || :CONTROL.CONTRACT_NO_INPUT, ---where clause to retrieve the record                       
                              'Downloading from Database', --Progress Bar title                       
                              'Wait to Complete'); --Progress bar subtitle  client_host('cmd /c start '||vfilename);
              client_host('cmd /c start '||vfilename);                 
         else
              errmsg('Please choose contract no');
         end if;4. use the code below to open file dialog
    x:= WEBUTIL_FILE.FILE_OPEN_DIALOG ( 'c:\', '*.gif', '|*.gif|*.gif|', 'My Open Window' ) ;
    :b2.FILE_NAME:=X;

  • How do i import my local csv files into HANA database as temporary tables  using java program?

    I want to import my local csv file into database for further apply Join with other tables programmatic in JAVA

    Hi Vivek,
    Please go through the following blogs and video to resolve your issue.
    Loading large CSV files to SAP HANA
    HANA Academy - Importing Data using CTL Method - YouTube
    Hope it helps.
    Regards
    Kumar

  • How to import Word or Excel files in Project 2013.

    I am facing a problem in Microsoft Project 2013. I am trying to insert a word or an excel file into Project 2013. But for each file,
    an import wizard appears and after trying all the possibilities, I am unable to finish it. Please help me out and tell me how to import Word or Excel file in Project 2013.

    Parulg --
    From your description, it sounds like you are trying to attach a Word or Excel document to a project, or to insert the Word or Excel document into the project.  If that is the case, you actually need to attach the Word or Excel document to a task in
    the project.  There are several ways to do this, but in either case you first need to open the project to which you want to attach the Word or Excel document.  You can then use one of several methods, which are:
    Click the View tab to display the View ribbon.  In the Data section of the View ribbon, click the Tables pick list button and select the More Tables option.  In the More Tables dialog, select the Hyperlink table and then click the Apply button.
     For any task in the project, enter the hyperlink to the Word or Excel document in the Hyperlink column for that task.
    Double-click a task and then click the Notes tab.  On the Notes page of the Task Information dialog, click the Insert Object button.  In the Insert Object dialog, select the Create from File option and then use the Browse button to navigate to
    the folder containing the Word or Excel document.  In the Browse dialog, select the Word or Excel document and click the Insert button. In the Insert Object dialog, select the Display As Icon checkbox.  You can also select the Link checkbox if you
    want to create a shortcut to the document rather than embedding the document in your Project file.  Click the OK button when finished.
    Just a couple of ideas based on my assumption about what you are trying to do.  Please let us know if my assumption is wrong.  Hope this helps.
    Dale A. Howard [MVP]

  • Import-Export of track add some old projects and files.

    We want to copy one NWDI track to new one.
    When we Forward one track to to created new one, and open projects in Development Studio,
    many old projects and files appeared, thatis not visible if to open old track in Studio.
    So question is - how to export one track so it would appear in studio same way, but not "open all old existed" way?
    As well very interested reason why so happens ?
    thanks

    Hi Vladimir,
    I am not sure I fully understand your question, but if you'd like to copy a track to an other one, then I can suggest you to go for replication. This way you can keep the whole version history as well.
    Replicating a Track into a Different DTR Repository (despite the title of this article I was confirmed by the development support that you can also use this procedure to replicate into the same DTR, not only into a different one)
    http://help.sap.com/saphelp_nw70/helpdata/en/46/5d032c1e661cbee10000000a11466f/frameset.htm
    If this is not what you need, then please rephrase the question for better understanding.
    Thank you!
    Best Regards,
    Ervin

  • How to delete all projects and accompanied files from Adobe Premeiere Elements 13

    I would like to delete all projects and files and start anew, but I cannot find a clear enough instruction how to do it. Please help'

    vitprod
    Same other versions as well.
    There is no one delete button that wipes away the project file (.prel) and the project's assets. You need to go to the save locations of the project file (.prel) and its assets and delete
    each one by one wherever they are saved UNLESS you pre-plan and, before the project is created, set up a particular project so that the project file with assets goes to its own folder instead of each component of the project going into a common place for Premiere Elements files and folder where you have to pick out the materials for deletion one by one by name.
    Answers
    Default type situation
    If left at defaults and if your Premiere Elements 13 is running on Windows 7, 8, or 8.1 64 bit, go to Libraries/Documents/Adobe/Premiere Elements/13.0 and, in the 13.0 Folder, delete standalone files with your target project's name and delete files with your target project's name in the folders found in the 13.0 Folder.
    Plan Ahead
    Edit Menu/Preference/Scratch Disks - Set all to Same As Project.
    Create a new folder at a hard drive location of choice.Then point the project file to that folder for the Save In.
    Tip: When the Expert workspace of the new project opens, go to File Menu/Save As. Name the project and set the new folder created as the Save In of the Save Project dialog.
    Please review and consider and then let us know if any of that worked for you.
    Thanks.
    ATR

  • How do I import iPhoto raw (NEF) files into Lightroom 3.6?

    how do I import iPhoto raw (NEF) files into Lightroom 3.6?

    You will need an application that can convert those pcd files into one that iPhoto supports, mainly jpeg. GraphicConverter is supposed to support many, many formats and might just support the pcd. If so you could use it to convert them to jpegs.
    There's an automator workflow that I've put into an application that will take many image files and convert them into jpeg with the RGB color profile. I've never tried it on the Kodak files but you can give it a try. It's called +*Convert to JPG and Embed sRGB profile*+ and can be downloaded from Toad's Cellar. Make a copy of a couple of files and see if it will work. If so then you can batch convert folders of the files at once by dragging them onto the application.
    I believe GC can do batch conversions but am not familiar with the application.

  • How to import maven projects into jdev

    Hi.
    i have maven project created in other than jdev IDE.i am trying to import maven project into jdev.
    i configured maven in jdeveloper 11.1.1.4 with help manu check for updates.
    i am follwoing the [how to import maven project into jdev|http://www.oracle.com/technetwork/developer-tools/jdev/maven11g-090173.html#4]
    after updating my jdev with maven extensions,i could not see maven project in file|import project menu.
    why maven project is not appearing in jdev 11.1.1.4. file|import project menu ?
    please help appriciate your help

    Though it's not clear in that link, I believe those instructions to be for JDev 11.1.2.1.0, not 11.1.1.4.0. However somebody may correct me.
    CM.

  • What was location of project and files on import?

    I have a four months old PP CS3 project (on Mac - with files from a Sony EX3) that, together with relevant files, has been moved to an archive HD. I now have to work on this again but as each clip is stored in an individual folder I would like to move the project and files back to the position they had on import, rather than having to manually open each folder to relink. The problem is that I don't recall on which HD the original import and editing took place. Is there any way to find this information in the project?

    That depends on how the project was moved.
    If the Project Manager was used then you're out of luck.
    If not then you can open the project file in a text editor and search on the file name until you find text that includes the full path with the filename. Somewhat tedious, but it can be done.
    Cheers
    Eddie

Maybe you are looking for