How to import into lightroom 3.6 from my pictures windows xp

also, after editing in Develop the photo goes darker in Print and also darker back to Develop and Library

Dear Mr. Wright:
In the back of my mind it seems like I might have seen a CD concerning my HP monitor but I'm not sure. Yes I did see a CD concerning a 15" 17" & 19" screen. I just looked everywhere and can't find a thing. I just remembered I have a (HP vs17e) with small speakers in the bottom corners and I saw that CD about 3 weeks ago. Maybe it will turn up if I keep looking?
About 5 years ago when I was using Lightroom or #1, I remember importing My Pictures from windows xp into the Library Space and picking a Folder to highlight and it would go right into the folder section of Lightroom (no problem). Now now there are 3 screens (2 large ones and 1 small screen and I am totally confused. I've been sick for 3 years and haven't taken any photos for 3 years. Today I shared my 3 folders from My Pictures in windows xp with Lightroom 3.6 and nothing happened in 3.6. So I moved my folders back to My Documents and then drugged the folders to (My Pictures Folder) in My Documents. Now my 3 folders are back in My Pictures in windows xp. Yesterday I had all 3 folders in 1 folder titled E: (much too large) and then the large folder was missing this morning from Lightroom 3.6. When you click on My Pictures in 3.6 you get Sample Pictures...... I deleted the Sample photos from my My Pictures in windows xp but haven't tried clicking on 3.6 (I started working on these 2 problems at 8:00am it's now 7:30pm).
RobertRothePhotog .............. [email protected]

Similar Messages

How to Import into Lightroom 3 from Photoshop elements 8?

I just installed Lightroom 3 and bypassed the option to import my pics from from Photoshop elements 8 (to see what other options were available. Lightroom advanced a page and there seems to be no way to return to the previous page, I've closed the page & reopened a few times.
I cannot locate where PSe8 stores it's files either so that is not an option. How do I reset lightroom to import my old files? Thank you.
I also see "upgrade files" but have no idea what this means & don;t see it explained; seems users are to already know the software before buying it. Thanks again!
BTW, I have tried to avoid posts in the past with my other software so not sure how I will receive the reply - assume I'll get an email.

Thanks for your guidance, I had no idea what SDK is & only noticed Lighhtroom so picked it.

I have already assigned photos from iPhoto to folders in Pictures on the Mac using the instructions from Adobe. How do i now move more recent photos from iPhoto without duplication and import into Lightroom?

I have already assigned photos from iPhoto to folders in Pictures on the Mac using the instructions from Adobe. How do i now move more recent photos from iPhoto without duplication and import into Lightroom?

If the images are in the location you want them be sure to select "Add" at the top of the import dialog box.

Re Importing into Lightroom 4.1

My photographic equipment consists of a Nikon D 7000 ( set to RAW) and a P 5000 (JPEG). My computer is an iMac with Lightroom 4.1 installed. Up until recently it has been possible to import from the SD cards directly into Lightroom via the reader in the side of the Mac. As of late the program will let me see the previews but when I attempt to import the images a message pops up that the files cannot be read! I can import them into 'iPhoto' but this is not where I want them! Can any one please suggest what has caused this new problem? I eagerly await any suggestions. With Thanks.

Dear tlsteinb.Thanks for your reply. I tried the ejection of the external drive as you suggested. To no avail! It is still a mystery to me. I do not know if i have to change a setting on the camera, the computer, or the program! I tried to send a 'chat' message to Adobe directly.How successful that will be we will wait and see! I shall keep you posted. Regards, Rae Dall
Date: Tue, 5 Jun 2012 10:20:47 -0600
From: [email protected]
To: [email protected]
Subject: Re Importing into Lightroom 4.1
    Re: Re Importing into Lightroom 4.1
    created by tlsteinb in Photoshop Lightroom - View the full discussion
Just this morning I've begun experiencing the same thing. I can get the photos off the card and onto the iMac desktop for instance, but they won't import into Lightroom 4 from either the card reader or the desktop. So my assumption is that my card reader is working fine, but Lightroom is not. Any help would be greatly appreciated.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467079#4467079
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467079#4467079. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HOW TO IMPORT DATA MORE THAN ONCE FROM THE SAME EXPORT DUMP FILE?

before asking my question i'd like to mention that i'm a french spoke...
so my english is a little bit bad. sorry for that.
my problem is : IMPORT
how to import data a SECOND TIME from an export dump file within oracle?
My Export dump file was made successfully (Full Export) and then i
tried to import datas for the first time.
I got this following message in my logfile: I ADDED SOME COMMENTS
Warning: the objects were exported by L1, not by you
. importing SYSTEM's objects into SYSTEM
REM ************** CREATING TABLESPACES *****
REM *********************************************
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "USER_DATA" DATAFILE 'E:\ORANT\DATABASE\USR1ORCL.ORA' SI"
"ZE 3145728 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAX"
"EXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "ROLLBACK_DATA" DATAFILE 'E:\ORANT\DATABASE\RBS1ORCL.ORA"
"' SIZE 10485760 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS "
"1 MAXEXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
etc........
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "L1" DATAFILE 'E:\ORADATA\L1.DBF' SIZE 1048576000 "
"DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAXEXTENTS 121 PCTIN"
"CREASE 50) ONLINE PERMANENT"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file 'E:\ORADATA\L1.DBF'
ORA-09200: sfccf: error creating file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
--->etc..........
the drive E: with the folder E:\ORADATA didn't exist, but after
all that i created it.
see below, before my IMPORT statement
REM ********************* CREATING USER *********
REM ********************************************
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "L1" IDENTIFIED BY VALUES 'A6E0DAA6865E7627' DEFAULT TABLESPACE"
" "L1" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'L1' does not exist
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "MLCO" IDENTIFIED BY VALUES '56AC6447B7D50467' DEFAULT TABLESPA"
"CE "MLCO" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'MLCO' does not exist
ETC.......
REM ********************* GRANTING ROLES ***********
REM ************************************************
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ALTER ANY TABLE to "L1" "
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'L1' does not exist
ETC.........
IMP-00017: following statement failed with ORACLE error 1918:
"ALTER USER "L1" DEFAULT ROLE ALL"
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'L1' does not exist
-- that is normal, since the creation of the
tablespace failed !!
REM******************************
IMP-00015: following statement failed because the object already exists:
"CREATE ROLLBACK SEGMENT RB_TEMP STORAGE (INITIAL 10240 NEXT 10240 MINEXTENT"
"S 2 MAXEXTENTS 121) TABLESPACE "SYSTEM""
IMP-00015: following statement failed because
. importing SCOTT's objects into SCOTT
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "EVT_PROFILE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999"
"999999 INCREMENT BY 1 START WITH 21 CACHE 20 NOORDER NOCYCLE"
ETC............
importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
REM *************** IMPORTING TABLES *******************
REM ****************************************************
. importing SYSTEM's objects into SYSTEM
. . importing table "AN1999_BDAT" 243 rows imported
. . importing table "BOPD" 112 rows imported
. . importing table "BOINFO_AP" 49
ETC................
. . importing table "BO_WHF" 2 rows imported
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "DEF$_CALL" ("DEFERRED_TRAN_DB" VARCHAR2(128),
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ROLES" FOR "SYS"."DBA_ROLES""
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ERRORS" FOR "SYS"."DBA_ERRORS""
IMP-00008: unrecognized statement in the export file:
. importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00008: unrecognized statement in the export file:
J
Import terminated successfully with warnings.
-------------------------------------b]
So after analysing this log file, i created
the appropriate drives and folders... as the
import statement doesn't see them.
E:\ORADATA G:\ORDATA etc...
And i started to [b]IMPORT ONE MORE TIME. with:
$ IMP73 sys/pssw Full=Y FILE=c:\temp\FOLD_1\data_1.dmp BUFFER=64000
COMMIT=Y INDEXFILE=c:\temp\FOLD_1\BOO_idx.sql
LOG=c:\temp\FOLD_1\BOO_log.LOG DESTROY=Y IGNORE=Y;
after that i could not see the users nor the
tables created.
and the following message appeared in the log file:
Warning: the objects were exported by L1, not by you
. . skipping table "AN1999_BDAT"
. . skipping table "ANPK"
. . skipping table "BOAP"
. . skipping table "BOO_D"
ETC.....skipping all the tables
. . skipping table "THIN_PER0"
. . skipping table "UPDATE_TEMP"
Import terminated successfully without warnings.
and only 2 new tablespaces (originally 3) were
created without any data in ( i check that in
the Oracle Storage manager : the tablespaces exit
with 0.002 used space; originally 60 M for each !!)
so,
How to import data (with full import option) succefully
MORE THAN ONE TIME from an exported dump file ?
Even if we have to overwrite tablespaces , tables and users.
thank you very much

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the appropriate Database forum.
The main URL is:
http://forums.oracle.com/forums/index.jsp?cat=18

How to import a *.dmp file (exported from 10g) to 8i database?

Hi everybody!
Could anybody tell me how to import a *.dmp file (exported from 10g) to 8i database?
I have tried but it seemed to be error "wrong version".
Thanks a lot!

From 10.1.0 to 8.1.7 => Use the EXPORT 8.1.7 to export the data from the 10.1.0 database and IMPORT 8.1.7 to
import the data into the 8.1.7 database.
Metalink note 132904.1 Subject: Compatibility Matrix for Export & Import Between Different Oracle
Nicolas.

Problem with Importing into Lightroom

I have Lightroom 5.3 64 bit installed on a Windows 7 SP1 machine. I have two pairs of mirrored HDDs for image file storage.
I: and J: are both mirrored pairs of HDDs (four discs). When I first imported the "Panorama images" image files on the (I:) drive into Lightroom, the file called "8 bit Adobe RGB Panos" was corrupted on the drive; the "8 bit Adobe RGB Panos" files were not accessible from Lightroom or Photoshop or Windows. (The screen shot above is comparable to a before-and-after screen shot; the (J:) is like the before and the (I:) is like the after screen shot. The "8 bit Adobe RGB Panos" file is there before importing into LR, but it is missing after "Panorama images" is imported into LR.)
Below is what Windows and Lightroom showed after the Import of "Panorama images" into LR.
I replaced the "8 bit Adobe RGB Panos" file, from backup media. I tried Importing the files a second time, and the same thing happened again. At that point I gave up on importing any part of the "Pano" image files into LR.
Next: I also have image capture files, camera card downloads, archived on the same mirrored arrays, in the "My Pictures" file. When I tried to Import the latest file of camera images into Lightroom from "My Pictures", LR again erased or corrupted the "8 bit Adobe RGB Panos" files, on both arrays, and again "8 bit Adobe RGB Panos" disappeared, and again I had to replace it from backup media.
This is very irritating. Very very irritating. At this point it makes Lightroom more harmful that useless.

The reason for the different drive designation is the assignment when the drives have been remounted.. The first time this occurred, the machine had one two-drive-array, "Photo Storage RAID (F:)". When I imported into LR the "Panorama images" file, the "8 bit Panos Adobe RGB" file path was lost. The files could not be found in PS or LR. Windows Explorer could not find the files, and showed the odd "8BITAD-1". All of the other files in the "Panorama images" file were imported into the LR catalog.
I then replaced both discs in the RAID array with new HDDs, and rewrote the files on to them, and remounted the array (new letter assignment for the drive). I then, a few months later, tried to again Import the Panorama images file into LR. And the exact same thing happened.
I removed and rewrote both arrays, the new disc pair and the old disc pair, and remounted them, now they are drives (I:) and (J:). (One pair is mounted to the board disc controller, and the other pair is mounted on a PCI SATA controler card,
I then imported "My pictures" (not the "Panorama Images" file) from the (I:) drive into LR, and the "8 bit Adobe RGB panos" again disappeared from the (I:) drive, That is the top screen capture. I then tried to Import the "My Pictures" file from the (J:) drive, and the "8 bits Adobe RGB panos" file disappeared from the (J:) drive; the (J:) file path looked the same as the (I:) file paths in the top screen capture.
LR imported about one half of the "My Pictures" files from the drives; all files between 2016 and 2012 were not imported into the LR catalog (The "My pictures" content files are named by dates, year_month_day).
LR is installed on a 250 gig SSD, and the catalog is also located there. (I have used PS with mirrored arrays since Windows 2000 and BX-133 MBs and PS5,)
(when the 8 bit panos go missing, they are missing from windows too)

PSD files created using export data set fail to import into lightroom

If I create a set of files using variables in a data set, the PSD files won't import into LightRoom. LR says to resave with maximum compatibility, but I already have that set in Photoshop. If I open one of the files and resave it, it will import. Perhaps PS isn't honoring the maximize compatibility setting when exporting.

Hi,
I downloaded 10g database ver 10.2.0.1.0 from oracle site and installed it on my laptop. I took an export of schema which was on my 9i database ver 9.2.0.1.0 using 9i exp, created tablespace and user in the 10gdb and tried to import the same to 10gdb using 10g imp using the following.
imp system/pswd@10gdb fromuser=test touser=test file=expdat.dmp log=expdat.log
it displays
.importing SYSTEM'S objects into SYSTEM
.importing TEST'S objects into TEST
and it doesnt import any objects just hangs. The Log file does'nt have any entries.
Can anyone help me.
Thanks in advance
Smdas

How To Import Into A Table with Multi-Value Fields

Hello:
I have a table with a multi-value field that contains states in which a company does business. It is multi-value because there can be more than one state. I tried to import a text tab-delimited file in which the data was arranged as follows:
Field1 Tab Field 2 Tab OR, WA, CA Tab
The "State field contained the multiple entries separated by a comma (like they appear in a query of the multi-value field), but it won't accept it. Does anyone know how to import into a multi-value field?
Thanks,
Rich Locus, Logicwurks, LLC

Joana:
Here's the code I used to populate a multi-value field from a parsed field. The parsing routine could be greatly improved by using the Split function, but at that time, I had not used it yet. FYI... the field name of the multi-value field in
the table was "DBAInStatesMultiValue", which you can see in the example below how it is integrated into the code.
Option Compare Database
Option Explicit
Option Base 1
Dim strInputString As String
Dim intNumberOfArrayEntries As Integer
Dim strStateArray(6) As String
' Loop Through A Table With A Multi-Value Field
' And Insert Values Into the Multi-Value Field From A
' Parsed Regular Text Field
Public Function InsertIntoMultiValueField()
Dim db As DAO.Database
' Main Recordset Contains a Multi-Value Field
Dim rsBusiness As DAO.Recordset2
' Now Define the Multi-Value Fields as a RecordSet
Dim rsDBAInStatesMultiValue As DAO.Recordset2
' The Values of the Field Are Contained in a Field Object
Dim fldDBAInStatesMultiValue As DAO.Field2
Dim i As Integer
' Open the Parent File
Set db = CurrentDb()
Set rsBusiness = db.OpenRecordset("tblBusiness")
' Set The Multi-Value Field
Set fldDBAInStatesMultiValue = rsBusiness("DBAInStatesMultiValue")
' Check to Make Sure it is Multi-Value
If Not (fldDBAInStatesMultiValue.IsComplex) Then
MsgBox ("Not A Multi-Value Field")
rsBusiness.Close
Set rsBusiness = Nothing
Set fldDBAInStatesMultiValue = Nothing
Exit Function
End If
On Error Resume Next
' Loop Through
Do While Not rsBusiness.EOF
' Parse Regular Text Field into Array For Insertion into Multi-Value
strInputString = rsBusiness!DBAInStatesText
Call ParseInputString
' If Entries Are Present, Add Them To The Multi-Value Field
If intNumberOfArrayEntries > 0 Then
Set rsDBAInStatesMultiValue = fldDBAInStatesMultiValue.Value
rsBusiness.Edit
For i = 1 To intNumberOfArrayEntries
rsDBAInStatesMultiValue.AddNew
rsDBAInStatesMultiValue("Value") = strStateArray(i)
rsDBAInStatesMultiValue.Update
Next i
rsDBAInStatesMultiValue.Close
rsBusiness.Update
End If
rsBusiness.MoveNext
Loop
On Error GoTo 0
rsBusiness.Close
Set rsBusiness = Nothing
Set rsDBAInStatesMultiValue = Nothing
End Function
Public Function ParseInputString()
Dim intLength As Integer
Dim intStartSearch As Integer
Dim intNextComma As Integer
Dim intStartOfItem As Integer
Dim intLengthOfItem As Integer
Dim strComma As String
strComma = ","
intNumberOfArrayEntries = 0
strInputString = Trim(strInputString)
intLength = Len(strInputString)
' Skip Zero Length Strings
If intLength = 0 Then
Exit Function
End If
' Strip Any Leading Comma
If Mid(strInputString, 1, 1) = "," Then
Mid(strInputString, 1, 1) = " "
strInputString = Trim(strInputString)
intLength = Len(strInputString)
If intLength = 0 Then
Exit Function
End If
End If
' Strip Any Trailing Comma
If Mid(strInputString, intLength, 1) = "," Then
Mid(strInputString, intLength, 1) = " "
strInputString = Trim(strInputString)
intLength = Len(strInputString)
If intLength = 0 Then
Exit Function
End If
End If
intStartSearch = 1
' Loop Through And Parse All the Items
Do
intNextComma = InStr(intStartSearch, strInputString, strComma)
If intNextComma <> 0 Then
intNumberOfArrayEntries = intNumberOfArrayEntries + 1
intStartOfItem = intStartSearch
intLengthOfItem = intNextComma - intStartOfItem
strStateArray(intNumberOfArrayEntries) = Trim(Mid(strInputString, intStartOfItem, intLengthOfItem))
intStartSearch = intNextComma + 1
Else
intNumberOfArrayEntries = intNumberOfArrayEntries + 1
intStartOfItem = intStartSearch
intLengthOfItem = intLength - intStartSearch + 1
strStateArray(intNumberOfArrayEntries) = Trim(Mid(strInputString, intStartOfItem, intLengthOfItem))
End If
Loop Until intNextComma = 0
End Function
Regards,
Rich Locus, Logicwurks, LLC
http://www.logicwurks.com

I have and existing web site and domain name. I'd like to know how to import into iweb. I currently use Yahoo's sitebuilder to build my site but Sitebuilder is not compatible with the iMac

I have and existing web site and domain name. I'd like to know how to import into iweb. I currently use Yahoo's sitebuilder to build my site but Sitebuilder is not compatible with the iMac

Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the creation of the new site with iWeb.
OT

E52- how to import contacts to ovi suit - from csv...

hi,
for E52 mobile - how to import contacts to ovi suit - from csv , excel files, can any one please?

I used the program MyphoneExplorer to back up the ocntacts from my old S-E phone (or perhaps it was S-E's own PC Companion. Anyway, when pasting from that program I got a bunch of vcf files. I dropped and dragged these into Nokia PC-Suite and it workd very well.
To add a little gripe about these "so called2 user friendly PC-suite programs - THEY ARE NOT. Are you listening Nokia?
I want to selectively import and export every single bit and byte from my phone in and out to my PC. I want to modyfy the data and put it back up again into the phone. Why is that supposed to be made so difficult.
Spend less time making the finsishing touches on you icon and color gradient and put in more FUNCTION. Being locked up into one phone brand, just makes you agry - and you always find around the limitations.
Interestingl, try to search your manual for "Import". NOTHING comes up concerning contacts. But synchonizing sigh - if you have nothing to synchronize - because everything is on the PC - does not do you much good does it?

How do I get a raw image from "My Pictures" into Photoshop?

How do I get a RAW image from "My Pictures" into Photoshop? When I send it to Photoshop , it shows up as a grey checkerboard. The title is on the top. Whe I try to send a picture from Camera Raw, it does the same thing.

Has it ever worked or is this just something that started happening recently?
Have you tried resetting the photoshop preferences file?
http://forums.adobe.com/thread/375776?tstart=0
Have you installed the latest updates for photoshop cs5?
In photoshop cs5 go to Help>Updates
To post the system info here on the forum it might depend on your browser, but using firefox as an example, you would open the system info in photoshop, press Copy then OK.
Here on the forum you would press the ctrl key and paste.

Urgent: how to import or transport abap class from dev to q

How to import/transport custom abap class from dev to q.
Any suggestions points will be awarded.
Thanks in advance.
MK

hi M K,
try SE24, your class, and go to menu 'Go to' -> object directory entry,
click pencil icon and give your package name, will raise request.
SE10 to release and STMS from prod to import.
hope this helps.

How to import photos containing a tag from elements?

how to import photos containing a tag from adobe elements 8?

Tags are keywords.
Other metadata:
There is no way to share Faces from one system to another. Places will happen automatically if your photos have the gps co-ordinates in the Metadata. Events are populted depending on the choices you make in the iPhoto Preferences.
Again, I'm not sure exactly what you're hoping for here, sorry.

How to import microsoft outlook pst files from window 7 to mac mail

How to import microsoft outlook pst files from window 7 to mac mail??

Outlook PST to MBOX Converter is a best and user-friendly software that facilitates smooth conversion of Outlook mailboxes (PST files) to MBOX files. The software supports PST to MBOX migration for Thunderbird, Spicebird, SeaMonkey, and Netscape.
For more information and free download click http://psttombox.blogspot.com

How to import into lightroom 3.6 from my pictures windows xp

Similar Messages

Maybe you are looking for