How to import JPEG sequence into Photoshop CS5.1 - Windows 7 64x?

Specs:
Windows 7 Home Premium 64x
Adobe Photoshop CS5.1
I have been doing animated banners by using Ae and exporting my animation as JPEG sequences in order to import it to Photoshop and export it as GIF. However, I just upgraded to CS5.5 and I cannot find the "image sequence" checkbox when opening a file.
I would normally see this check box when going to File > Open .. select one file and the open window would have this check box at the botton, which I no longer see.
I could import all my (130) JPEG sequence images and then use the animation window but that would be soooo stressing and tedious.
Any help will be appreciate it!

If you have a series of jpeg images use menu File>Scripts>Load Files into Stack. This will load all the jpeg image files into a single document as layers. Use the Animation Palette fly-out memu and click on make frams from layers.

Similar Messages

How can i import my scanner into Photoshop CS5?

Hi.
I have just installed Photoshop CS5 for Windows. I went to import my scanner (Epson Lide 500F) and it's not showing up.
I have reinstalled it, but it still doesn't show up.
Do i need to save it into a particular PS file? At the moment it's going into the Programmes file.
Thank you

Photoshop CS5 doesn't ship with a TWAIN scanner interface installed, because it sometimes causes problems due to buggy drivers. It does have a WIA scanner capability; that your scanner does not show up may mean that the drivers for that particular model are not being actively updated by the manufacturer of the scanner.
You can install the optional Twain plug-in into Photoshop CS5 32 bit only, which may get you the functionality you need:
http://kb2.adobe.com/cps/405/kb405072.html
Failing all of the above, you may need to get a new scanner. I have had to buy three myself over the history of Photoshop releases since the '90s simply because of cessation of support. It is the way it is.
Hope this helps.
-Noel

__Just bought a Canon Scanner (CanoScan9000F) - how do I scan directly into Photoshop CS5?

I have a CanoScan 9000F scanner - I'm trying to scan through Photoshop CS5 Extended but I just can't figure it out...
I downloaded the TWAIN plug-in:
http://kb2.adobe.com/cps/405/kb405072.html

Canoscan comes with a bunch of software including ScanGear - in manual it says you should use this instead of Twain (don't know why that) or VIA. If you installed everything correctly you should see the it in File->Import->CanoScan 9000F.
On the other hand I have few questions, maybe someone can help:
- how to I scan 48bit images into PSE ?
- is it possiblle to automate dirt / scratch removal for b/w negatives (FARE) ?
- maybe you know of a plug-in that can do it - I have thousands of black and white films to scan, and doing it by hand is not really an option (for colour materials FARE works great)
Other than that i find the scanner quite good, especially the ability to scan more than one frame at a time - I can set it up in a moment (LED light is great, no warm-up time for a scanner finally), and then let it to the work, while i do my work - as scanning - mebye due to the fact that my computer is not the fastest out there) is still slow - 4 slides take > 30 minutes. But the results are very nice - if you want to check the quality, here is the link to my photographs scanned in PSE and Canoscan (origanally at 3200 dpi, resized for the web).
Tomasz Czarnecki :: teleskopy.net

How do I install Textures into Photoshop CS5?

I just got CS5 and can't figure out how to install textures into it. I am not even seeing a Textures folder. Can anyone provide me with a bit of guidance on this? It would be greatly appreciated. Thanks in advance.
Sabrina

This worked for me: I created a Textures folder in my user presets folder (Users/(name)/AppData/Roaming/Adobe/Adobe Photoshop CS5/Presets); I moved my desired .PSD textures there. Then, when I restarted PSCS5, I went to Filters>Texture>Texturize and clicked on the flyout menu next to Texture:. When prompted to Load Texture ... , I drilled down to that same Textures folder I created under my user name. The texture won't be added to the standard textures (Brick, Canvass, etc.), but PSCS5 will remember the location you specified to look for textures.
You can do the same thing by creating a Textures folder in the Program Files (x86) (Program Files (x86)/Adobe/ ... etc.) but you'll need Administrator powers for this and for every time you want to add textures.

How to import tif sequences into FCP

We did some painted animation on After Effects, save them as TIF sequences and want to import them into FCP. Does anyone has any tips on how to do that?
It seems that saving them as tif sequence it will preserve more quality when importing them into the movie (live-action) in FCP or AVID, etc.
Thanks!

I know... and also I could have saved them as a quicktime movie straight from after effects. The reason I decided not, is that I was told that the tiff files in sequence would have better quality (including when using blending upper and lower fields) when importing them into a final composition at the professional studio, where we will put the image and the sound together.
The professionals that recomended me that use AE in PCs, them they go to a editing facility and import all the tif sequences (usually they use AVID) into their videos. I wanted to do this in our FCP and go to the editing facility with all the image ready.
I thought that FCP could import image sequences. I do not know if it would make any difference just having all in quick time.
Any tips anyone?

How to import .vob files into Encore CS5?

I know Encore CS4 and 5 support the import of .VOB files but how is this achieved exactly? I've got a DVD that is not copy protected and I've tried Import as Asset and dragging the .VOB files to the project but neither works. What's the procedure please?

You do not.
You can Import 100% DVD-compliant VOB's into PrPro, as of CS4.2. That is what you will want to do.
The alternative method is to rip the MPEG-2 files from those VOB with other software, and then Import those into Encore.
A VOB is what Encore produces, not what it uses.
This ARTICLE will give you some background.
Good luck,
Hunt

Importing from iPhoto into Photoshop CS5

I wish to create a collage image made up of photos that requires 300 dpi resolution for printing. The photos come from my digital camera via iPhoto. When I open them up in Photoshop and go to Image>Image size.. the photo shows as having only 72 dpi resolution. How can I open photos from iPhoto and retain the higher resolution coming from the camera?

Short answer: the dpi is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

How can I process a Sony A7 RAW file into Photoshop CS5.

How can I process a Sony A7 RAW file into Photoshop CS5. I tried the file DNG converter 8.3, but it did not work. I was able to download it, but upon reading the memory chip from Photoshop CS5, it reads the jpg files fine, but not the RAW files. I thought the DNG converter 8.3 was the right file, but apparently it is not. Perhaps I need to do something in Photoshop CS5 to initiate it, or place it in a particular directory.. Please help.

First of all, you should have used the Adobe DNG Converter 8.6, not an old, obsolete version. Always use the very latest version. 8.3 was simply the first ACR version to support your camera model, that's all.
Note that the DNG Converter works only on folders, not on individual raw files. Put all your Sony raw files in a folder and run the Converter on that folder containing the raw files.
I have absolutely no clue as to what on Earth you mean by : "upon reading the memory chip from Photoshop CS5".
You also need to make sure that CS5 is fully updated. You cannot rely on the highly and notoriously unreliable Adobe auto updater to tell whether you have the latest update installed or not.
I still have no idea what platform you are on, Mac or Windows. Please read the following for next time:
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them, etc.,
someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How do I import Aperture Library into Photoshop Elements 12?

New to Photoshop Elements 12.How do I import Aperture Library into Photoshop Elements 12?

You would really need to export copies from the Aperture database, to folders on your hard drive and then import them into Organizer.
Or continue with Aperture (don’t use Organizer) and simply send photos to the Elements Editing app as required.

How can I import image sequences into Fireworks???

How can I import image sequences into Fireworks???

I quote:
Not specifically "import" but you can open a series of images as an animation. This will place each image in its own state, suitable for creating an animation.
Choose File > Open
Select the images
Enable Open as animation.
Import image sequence (CS4)

How do I install a plug-in module into photoshop CS5 for a Sony Digital Photo PrinterUP-CR10L?

I am trying to install a borders module for the Sony Digital Photo Printer UP-CR10L into photoshop CS5. I have copied the plug-in into the program file for Adobe plug-ins but it is not coming up in photoshop. What am I doing wrong?
Thanks for your help.
Sherri

Hello imagesbysherri,
Our Sony Professional Product team would be better equipped to assist you with this. You can find them on Facebook at www.facebook.com/SonyProUSA. I hope this helps.
Best regards,
Farley

Importing a pdf into photoshop CC and it corrupts the artwork slightly but in older photoshop version it does not corrupt?

Hi
When Importing a pdf into photoshop CC it corrupts the artwork slightly but in older photoshop version it does not corrupt? Please help as this corruption slightly marked the artwork, it was then printed and is going to cost my company thousands to replace. [email protected]

"Slightly corrupted" sounds very much akin to "slightly pregnant". Hard to imagine.
I assume you're referring to some sort of image quality deterioration or some added artifacts.
Could you post a screen shot? Just so that someone familiar with PDFs opened in CC can form an idea of the nature of the "corruption" and where the cause might lie.
If you post back, please give complete hardware and software details about your setup, including the exact version of CC so they can see if all updates have been applied.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
software settings,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them, etc.,
someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Installing Mask Pro into Photoshop CS5

I am having difficultly installing OnOne plug-ins (Mask Pro 4, and the free versions of Photoframe and Perfect Effects) into Photoshop CS5. The OnOne site help gives an updated installer for Mask Pro 4, and says to first remove the old one. How do I uninstall it? What is the trick to installing the correct one?

My question was sent on the the PS forum and I received some helpful advice there and from the vendor's tech support.
Date: Sun, 20 May 2012 20:48:26 -0600
From: [email protected]
To: [email protected]
Subject: installing Mask Pro into Photoshop CS5
    Re: installing Mask Pro into Photoshop CS5
    created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
Ask such questions on the vendor's forums/ support sites or at least in the PS forums. Mylenium
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4424620#4424620
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4424620#4424620. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to Import Shake scripts into FCP?

Hello,
There may be info here on the Forum, but I wanted to ask this anyway: I've made a Shake script and a File Out Node and rendered that, but when I go to FCP I can't import, or Open that file. I did make it a Quicktime file, but I'm sure that I'm missing something. Could someone tell me how to import Shake comps into FCP? Thanks!

I guess I'm not sure what you mean, then - You can't render to a "script" file.
What format was was the QuickTime file you produced with your File Out node? Are you trying to do something with an Alpha Channel? If so, you could use the Animation codec with colors set to Millions+ or a TIFF sequence (or PNG), or maybe ProRes 4444, but I don't know if Shake can output to that codec.
More detail please,
Patrick

How to convert jpeg files into word

How to convert jpeg files into Word

Hi Eugene,
I don't think you can convert an image to a Word document, but you could place the JPEG into a Word document using the Insert > Object command in Word.
For other questions relating to Word, you will probably have more luck getting an answer if you post on the Microsoft forums (we can help if you're using Acrobat, or another Adobe product, but you'll find the Word experts on the Microsoft forums.)
Best,
Sara

How to import JPEG sequence into Photoshop CS5.1 - Windows 7 64x?

Similar Messages

Maybe you are looking for