How to import JPX import in 10G
Hi all,
Can any one please tell me, how to import JPX import in 10G for VO extension
Thanks to all
Pl post details of OS, database and EBS versions.
Pl see these MOS Docs
NOTE:283158.1 - Using OA Extensions to extend existing Apps 11i OA Framework pages (step by step)
NOTE:344204.1 - How to use XMLImporter/XMLExporter to import/export personalization
NOTE:344486.1 - How To Import/Migrate XML File
HTH
Srini
Similar Messages
-
How we import oracle 10g dump to oracle 9i
Hi
Expert I want to import oracle 10g dump to oracle 9i
is it possible ??????????
but how
Thanks
MadhveshWelcome to the forums !
Pl post details of your OS and database versions.
Pl see MOS Doc 1065604.1 (How to Import to lower version database or run network export with exp/imp utilities)
HTH
Srini -
How to import the organization to BPM standalone 10g
I create the contents of the organiztion in BPM studio 10g. When I deploy the ###.exp file to BPM standalone 10g, the new roles can be mapped to BPM standalone. However, the participants' information cannot be imported. How to import the participants' information?
SincerelyHi Ye,
To import the Participant information you entered in Studio into Enterprise:
1) Make sure the participants in Studio have First and Last names. While this is not manditory for Studio, it is for Enterprise.
2) In Studio, right mouse click "Organization" in the Project Navigator -> "Export" -> remember where you export the .xdml file
3) In the Enterprise Process Administrator tool click "Organization" -> click the "Import" tab -> "Organization" -> click "Browse" and select the .xdml file you exported in step 2 -> click "Import"
Hope this helps,
Dan -
How to import java Classes in report Builder 10g
How to import java Classes in report Builder 10g .....
ArshadHello,
To import the Java classes:
Add your jar in the REPORTS_CLASSPATH
Launch Reports Builder.
Note:
You must launch Reports Builder now so that the new REPORTS_CLASSPATH is used.
Choose Program > Import Java Classes to display the Import Java Classes dialog box.
Regards -
How to import a *.dmp file (exported from 10g) to 8i database?
Hi everybody!
Could anybody tell me how to import a *.dmp file (exported from 10g) to 8i database?
I have tried but it seemed to be error "wrong version".
Thanks a lot!From 10.1.0 to 8.1.7 => Use the EXPORT 8.1.7 to export the data from the 10.1.0 database and IMPORT 8.1.7 to
import the data into the 8.1.7 database.
Metalink note 132904.1 Subject: Compatibility Matrix for Export & Import Between Different Oracle
Nicolas. -
How to import Oracle 8i database objects into an Oracle 10g database ?
Hi all,
We plan to use Oracle 10g , but untill now we use Oracle 8i 8.1.7.4.1 .
I want to know how to import all of our Oracle 8i objects stuff to the new Oracle 10g database ; and should I create tablespaces or can I import simply the Oracle 8i tablespaces.
Thank you very much indeedIf you use 1 database schema for your application , export the schema only
for example
export NLS_LANG env before
export hr/hr file=hr.dmp log=hr.dmp
On 10g
======
create the user,tablespaces etc
import the user
run the utlrp.sql
you are ready
export NLS_LANG env before
import system/password file=hr.dmp log=hr.dmp fromuser=hr touser=hr -
How to import ORacle 7 database to Oracle 10g by using OWB?
Hi, I have an old Oracle 7 database that I want to import into an Oracle 10g database by using OWB. I have made an odbc connection to the Oracle 7 database, and the dblink is working when I test it through SQL Plus, and I also manage to see the source tables in the import wizard. But after I have selected the tables I want and "execute", then an error comes up that I can not figure out.
I am using Microsoft Oracle odbc driver on a Windows 2003 Server. I tried to use the ORacle 10g odbc driver, but then I could not connect to Oracle 7. I got a message about a specified driver that could not be loaded due to system error 127.
Anyway, I can connect and see the tables by using the Microsoft ODBC driver, but it will not import the metadata.
Is there a tutorial or something about how to import through an odbc connection?Ronny,
It's not possible to create a database link from 10g to 7. See the following Metalink article:
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=207303.1
To use the database link approach you'll need to create a 9.2 'hop' database -- a database who's sole purpose is to allow connections from 10g and from which you can connect to 7.
However OWB itself won't read metadata out of a 7 database, so you'll need to do some manual work -- eg create views on the 9.2 database for the tables on the 7 database that you want to read from.
Another potential solution is to use the heterogenous data services to connect via ODBC to the Oracle 7 instance; again OWB might not be able to read the metadata in which case you should create views somewhere where OWB can read from.
I hope my ramblings make some sort of sense :-)
Cheers,
Colin -
How to import the data in a .xls or .xlsx file into a oracle database table
Hi,
Please tell me how to import the data in a .xls or .xlsx file into a oracle database table in Oracle 10gR2 using Oracle Warehouse Builder 10gR2.....can we do something through Non-Oracle->ODBC?Yes, it is possible, look at this thread
[SQLServer access from AIX Warehouse builder|http://forums.oracle.com/forums/thread.jspa?messageID=2502982]
If your server (with target DB and OWB runtime) is on Windows OS this configuration will be simpler - you can use single server.
And additional link on OWB blog (with 11g transparent gateway)
[http://blogs.oracle.com/warehousebuilder/2008/01/11g_heterogeneous_agent.html]
(configuring nonoracle connection with 10g generic connectivity very similar to 11g gateway)
Also look at
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4406709207206#18830681837358
Regards,
Oleg -
How can Imported Package of components to be fully editable??
hi people,
with JDeveloper TP3
How To Import a Package of components that are editable and display in the
Application Navigator
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components
Says:
Tip: If you require components that are editable and display in the
Application Navigator. Add additional business components from a
directory that is not currently part of your project's source path, then
open the Project Content page of the Project Properties dialog and
add the parent directory for these other components as one of the
directories in the Java Content list. In contrast to imported packages
of components, additional components added to your project's source
path will be fully editable and will appear in the Application
Navigator.
but i can't even change Control hints.
with JDeveloper TP3
How To Import a Package of components that are editable and display in the
Application Navigator
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components
say:
To create the JAR files, in the Application Navigator right-click the Business
Components project folder and choose Deploy and the ReusableComponents
profile. A Deployment tab appears in the JDeveloper Log window that should display
feedback like:
---- Deployment started. ---- Apr 28, 2007 7:04:02 PM
Running dependency analysis...
Wrote JAR file to ...\ReuseableComponents\deploy\ReuseableComponentsCSMT.jar
Running dependency analysis...
Wrote JAR file to ...\ReuseableComponents\deploy\ReuseableComponentsCSCommon.jar
Elapsed time for deployment: less than one second
---- Deployment finished. ---- Apr 28, 2007 7:04:02 PM
then If you require components that are editable and display in the
Application Navigator Add additional business components from a
directory that is not currently part of your project's source path, then
open the Project Content page of the Project Properties dialog and
add the parent directory for these other components as one of the
directories in the Java Content list
where i didn't find Project Content page of the Project Properties
but i got
Compiling...
Context: selection=rootBusiness.jpr project=rootBusiness.jpr node=rootBusiness.jpr
Validating Business Component: rootbusiness.rootBusiness
copying rootbusiness/rootBusiness.jpx to output directory
Validating Business Component: rootbusiness.entity.Dept
copying rootbusiness/entity/Dept.xml to output directory
Validating Business Component: rootbusiness.entity.Emp
copying rootbusiness/entity/Emp.xml to output directory
Validating Business Component: rootbusiness.entity.FkDeptnoAssoc
copying rootbusiness/entity/FkDeptnoAssoc.xml to output directory
Validating Business Component: rootbusiness.Service.rootAppModule
copying rootbusiness/Service/rootAppModule.xml to output directory
Validating Business Component: rootbusiness.view.DeptView
copying rootbusiness/view/DeptView.xml to output directory
Validating Business Component: rootbusiness.view.EmpView
copying rootbusiness/view/EmpView.xml to output directory
Validating Business Component: rootbusiness.view.FkDeptnoLink
copying rootbusiness/view/FkDeptnoLink.xml to output directory
copying rootbusiness/Service/common/bc4j.xcfg to output directory
Updated file:/C:/JDeveloper/mywork/Root/rootBusiness/classes/META-INF/adfm.xml
[10:16:25 ص] Successful compilation: 0 errors, 0 warnings
and didn't find ReuseableComponentsCSMT.jar or ReuseableComponentsCSCommon.jar
thanks
Message was edited by:
greenApplewith JDeveloper TP3
How To Import a Package of components that are editable and display in the
Application Navigator
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components
Says:
Tip: If you require components that are editable and display in the
Application Navigator. Add additional business components from a
directory that is not currently part of your project's source path, then
open the Project Content page of the Project Properties dialog and
add the parent directory for these other components as one of the
directories in the Java Content list. In contrast to imported packages
of components, additional components added to your project's source
path will be fully editable and will appear in the Application
Navigator.
but i can't even change Control hints. -
Hi
I want to export my portal (generate with Oracle Portal 10g R2) to another Server, i create it from properties of the Page Gruop, but i don't know where is it? (physically) and how to import it to a new middle tier.
Can anybody help me?
Thanx.
Alex.Oracle states that "With the move to OracleAS Portal Release 2, and the introduction of OracleAS Web Cache into the portal architecture, the information in these tables became inaccurate. Therefore, all the pre-built reporting and charting portlets were removed from Portal." which is a major disappointment when they offer no drop-in... I've opted not to use Web Cache and will probably install WebTrends on the server which is what Andrew Sethi recommends... http://www.oracle.com/technology/products/ias/portal/pdf/oow_10gr2_1333_sethi_andrew.pdf
-
How to import the .exp/XPDL/XSDL file into ALBPM Studio 5.7
Hi,
Can somebody tell how to import the .exp file that are developed in ALBPM Studio 6.0/Oracle BPM 10g r3 into ALBPM 5.7. I have tried but can not able to import the project as the file suported by ALBPM 5.7 is <.fpr.exp>. I have also tried to import the XPDL/XSDL file developed in 6.0 to 5.7 but can not able to do so. It is importing the file but the only the automatic activities are showing in workspace (All the other activities like Interactive, Grab etc are not displayed). The code inside that automatic activities are also not there.
How to import the file/files in ALBPM 5.7
Regards,
BibhuHi Bibhu,
I expect importing a project to an older version of BPM isn't going to work or be supported.
Most products are built to be backwards compatabile, not forwards compatible.
I recommend you go to one version of the product anyway - trying to maintain two adds to your maintenance and support overheads.
In which case migrating your processes from 5.7 to 6.0 (or even 10g) would be supportable and the best way to go.
Rgrds,
Ian
. -
Can any one answer me how to import and use jsp libraries into uix file and
Hi guys
can any one help me how to import jsp libraries in to my uix file with jdev 10g production adn how to use them..if any one got any sample for this i appreciate if u cans end me that
thanks
Venkatyou cannot use jsp tags inside uix xml pages.
you can, however, use uix jsp tags inside jsp pages. -
How to import metadata into EPMA application by using ODI
Hi All,
1.Can you tell anyone, how to import metadata into EPMA application by using ODI. Detailed steps with screen shots will be appreciated.
2. What was the interface tables. How the interface tables will be useful while importing metadata into EPMA application (Detailed steps with screen shots will be appreciated.). And tell me the interface tables structure and work process. give me the clear idea bout interface tables. I don't know anything about interface tables.
3.Which method(either using ODI or Interface tables) is optimized/bestcase for importing metadata into EPMA application.
My database is Oracle 10g and I am using Planning 9.3.1.
Thanks in advance.
Thanks And Regards,
Bhagya Lakshmi.Hi,
Answer to your questions
1. You can't import metadata directly into EPMA using ODI, the only option is use the EPMA interface tables which is your question 2.
2. Interface tables are just a structure of database tables which you populate with metadata and then this is pushed into EPMA, the structure of the tables takes a while to get an understanding of. The best place to start would be the documentation :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/bpma_admin.pdf
3. As explained in question 1 you can't use ODI directly to import metadata into EPMA but with a lot of hard work and effort you could probably populate interface tables from EPMA, though I must admit I am not a fan of the interface tables because I don't think they were designed with simplicity and ease of use in mind.
Cheers
John
http://john-goodwin.blogspot.com/ -
Can I import a 10g MDL file into a 9.2 repository?
Good Morning/Afternoon/Evening
I started with OWB10g and created a repository. After creating several modules I realized I had an Oracle 9.2 database in which to deploy the runtime stuff.
I was unable to install the server side (AIX 5.2) binaries since I didn't have a 10g Universal Installer.
I exported the 10g repository information to an MDL file.
I dropped the 10g repository and created a 9.2 repository and also installed the 9.2 runtime components. All is cool so far.
I then wanted to import the MDL file from the 10g repository into the 9.2 repository and its then I hit the snag.
Is it possible to import a 10g MDL file into a 9.2 repository?
I was hoping the format was a standaard CWM type that would be recognized by either version but it looks like I'm incorrect.
Any other suggestions on how to get the 10g repository information into the 9.2 repository?
I still have the 10g repository on another server so I am able to do other types (?) of exports or whatever.
Many thanks for the help.
GaryGary,
I am puzzled by the reason "I was unable to install the server side (AIX 5.2) binaries since I didn't have a 10g Universal Installer." OWB 10g comes with its own copy of 10g Universal Installer. I am not claiming to ever install on AIX myself, but can you list the errors you get, perhaps we can troubleshoot the underlying problem, rather than working around it.
Not to dodge your question on exporting 10g MDL to 9.2. Even though this is an unsupported and untested scenario, because OWB 10g did not introduce any new objects, you can try editing the MDL as below. I don't see any risk in trying. Find the MDLRELEASE and RELEASE statements at the top (not the comments with #, they don't matter and change values back to 9.2, as in:
MDLRELEASE=9.2
RELEASE=9.2.0.2.0
And becuase OWB 9.2 does not know what Database 10g is, if you have any Database locations in your MDL that are set to 10g, change them to 9.2 as in:
[...]Oracle Database|9.2|[...]
Nikolai Rochnik -
How to import external table, which exist in export dump file.
My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character".
The original definition of the extenal table is as given below
CREATE TABLE EXT_TABLE_EV02_PRICEMARTDATA
EGORDERNUMBER VARCHAR2(255 BYTE),
EGINVOICENUMBER VARCHAR2(255 BYTE),
EGLINEITEMNUMBER VARCHAR2(255 BYTE),
EGUID VARCHAR2(255 BYTE),
EGBRAND VARCHAR2(255 BYTE),
EGPRODUCTLINE VARCHAR2(255 BYTE),
EGPRODUCTGROUP VARCHAR2(255 BYTE),
EGPRODUCTSUBGROUP VARCHAR2(255 BYTE),
EGMARKETCLASS VARCHAR2(255 BYTE),
EGSKU VARCHAR2(255 BYTE),
EGDISCOUNTGROUP VARCHAR2(255 BYTE),
EGREGION VARCHAR2(255 BYTE),
EGAREA VARCHAR2(255 BYTE),
EGSALESREP VARCHAR2(255 BYTE),
EGDISTRIBUTORCODE VARCHAR2(255 BYTE),
EGDISTRIBUTOR VARCHAR2(255 BYTE),
EGECMTIER VARCHAR2(255 BYTE),
EGECM VARCHAR2(255 BYTE),
EGSOLATIER VARCHAR2(255 BYTE),
EGSOLA VARCHAR2(255 BYTE),
EGTRANSACTIONTYPE VARCHAR2(255 BYTE),
EGQUOTENUMBER VARCHAR2(255 BYTE),
EGACCOUNTTYPE VARCHAR2(255 BYTE),
EGFINANCIALENTITY VARCHAR2(255 BYTE),
C25 VARCHAR2(255 BYTE),
EGFINANCIALENTITYCODE VARCHAR2(255 BYTE),
C27 VARCHAR2(255 BYTE),
EGBUYINGGROUP VARCHAR2(255 BYTE),
QTY NUMBER,
EGTRXDATE DATE,
EGLISTPRICE NUMBER,
EGUOM NUMBER,
EGUNITLISTPRICE NUMBER,
EGMULTIPLIER NUMBER,
EGUNITDISCOUNT NUMBER,
EGCUSTOMERNETPRICE NUMBER,
EGFREIGHTOUTBOUNDCHARGES NUMBER,
EGMINIMUMORDERCHARGES NUMBER,
EGRESTOCKINGCHARGES NUMBER,
EGINVOICEPRICE NUMBER,
EGCOMMISSIONS NUMBER,
EGCASHDISCOUNTS NUMBER,
EGBUYINGGROUPREBATES NUMBER,
EGINCENTIVEREBATES NUMBER,
EGRETURNS NUMBER,
EGOTHERCREDITS NUMBER,
EGCOOP NUMBER,
EGPOCKETPRICE NUMBER,
EGFREIGHTCOSTS NUMBER,
EGJOURNALBILLINGCOSTS NUMBER,
EGMINIMUMORDERCOSTS NUMBER,
EGORDERENTRYCOSTS NUMBER,
EGRESTOCKINGCOSTSWAREHOUSE NUMBER,
EGRETURNSCOSTADMIN NUMBER,
EGMATERIALCOSTS NUMBER,
EGLABORCOSTS NUMBER,
EGOVERHEADCOSTS NUMBER,
EGPRICEADMINISTRATIONCOSTS NUMBER,
EGSHORTPAYMENTCOSTS NUMBER,
EGTERMCOSTS NUMBER,
EGPOCKETMARGIN NUMBER,
EGPOCKETMARGINGP NUMBER,
EGWEIGHTEDAVEMULTIPLIER NUMBER
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EV02_PRICEMARTDATA_CSV_CON
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
While importing , when i seen the log file , it is failing the create the external table. Getting the error "ORA-00911: invalid character".
Can some one suggest how to import external tables
Addressing this issue will be highly appriciated.
NaveenHi Srinath,
When i observed the create table syntax of external table from import dump log file, it show few lines as below. I could not understand these special characters. And create table definationis failing with special character viz ORA-00911: invalid character
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv').
I even observed the create table DDL from TOAD. It is same as i mentioned earlier
Naveen
Maybe you are looking for
-
Can someone tell me how to make my screen full size on my Mac OSX 10.6.8. using safari. I know this is a simple question. I have always had it on full screen and recently had it worked on remotely and now I can't get the screen back to full size. I
-
Set Print Preset in 10.6.7
I've found several discussion on this around the internet, but they all date at latest 2008 using 10.4 or earlier. In 10.6, this command creates a line (that does not exist prior) in the plist, but does not set the preset: do shell script "defaults w
-
Acrobat 5.05 Distiller not Producing .pdf Files
When I first purchased Acrobat 5.05 and installed it, to produce a .pdf file from an application, I printed the file from the application choosing Acrobat Distiller as the printer. This prompted for a file name and location. When the OK button was
-
We have a report displayed on the dashboard in compound view. The Compound view shows a line graph along with a table (both show the same data). We wish to see the graph sorted in ascending order and the table content to be displayed in descending or
-
Two-factor / Multi-factor authentication for Sites login
Hi All, Would like to know if any one have implemented the two-factor authentication for Sites login ( Admin / Contributor Interface ), It will be really helpful if you could share any ideas on this. Regards, Anoop.