How to import my own template to iPages

I have a blank letterhead that I created that I want to be able to use over and over using iPages. However, I can't import the document to iPages. I tried scanning it as a .pdf file and iPages didn't recognize. I tried scanning it as a .jpeg file too. Can I get this blank letterhead into iPages so that I can send it to different people whenever I want?

Hi Lynda,
Where (what application) did you create the template?
If you want to use it in Pages, and did not create it in Pages, my suggestion would be to open a blank Pages document, then use Copy/Paste to move the elements of the letterhead into that blank document. Re-construct the letterhead there, then Save the result as a Template.
That will put it into the Template Chooser (in the My Templates section), ready for your use.
Regards,
Barry

Similar Messages

How to import Montion 5 Templates to Final Cut Pro? The Template changes background in Final Cut. Why?

I am trying to import the "splash" template from motion 5 to Final Cut Pro X. It works well as I can find the template, but the background in the template has changed. Why is this and where did I go wrong?

I'm unsure what you're asking about.
The Splash compositions are available in FCP in Titles. If you want to modify them, you can open a copy in Motion and make changes. You can then "publish" your custom version in FCP and both the original Splash and the custom Splash will be available.
You can also begin the process in Motion from the Project Browser. You can publish a copy that will be available from the project browser and you can add it to generators in FCP.
Of course, you can also use the Share menu to export and then import a QuickTime movie (not the template) into
FCP.
The workflow is way different than it was for previous versions of Final Cut and Motion.
Russ

How to import all HTML templates into your IT Server?

Hi All,
I am trying to configure Leave Request workflow (WS200000081).I have read that Html Templates need to be import/published in your ITS server. I am not clear as to what is an html template and how to publish it?
Regards,
Pavanmeet.

Hi Pavanmeet,
Since this is a standard service file provided by SAP no need to publish it.
For the error you mentioned, you can do the setting as below.
Go to SE80. In the menu go to "UTILITIES" select "SETTINGS". The screen is displayed. In the tab select ITS. Here you can set the ITS server path. This ITS will be selected when you publish the service file.
Regards
Arun

How to import my own class in jsp file

I have a jsp file in jsp\ directory and a class in web-inf\classes\ directory. How do I import the class in jsp so i can use it in my jsp file. Thanks,

This is your lucky day, wennie.
The correct forum to post this is:
[http://forums.sun.com/forum.jspa?forumID=45]

How to import my own package in my jsp?

I am doing aproject now. I have finished the java source file and complied them successfully. I want to package all of them and import this package in my jsp files. I copy all the .java and .class files to tomcat/webapps/projsp/WEB-INF/classes/ directory. I also write one line in my jsp file as following:
<%@ page language= "java" import="java.sql.*,java.util.*,java.io.*,induction.*" %>
My package named induction. I guess the problem is abput the class path. I don't know how can system find the package of mine. Hopefully, someone can help me!
Below is The error information when I run my jsp:
Internal Servlet Error:
org.apache.jasper.JasperException: Unable to compile Note: sun.tools.javac.Main has been deprecated.
/usr/local/tomcat/work/DEFAULT/projsp/jsp/geography_1.java:9: Package induction not found in import.
import induction.*;
^
1 error, 1 warning
at org.apache.tomcat.facade.JasperLiaison.javac(JspInterceptor.java:898)
at org.apache.tomcat.facade.JasperLiaison.processJspFile(JspInterceptor.java:733)
at org.apache.tomcat.facade.JspInterceptor.requestMap(JspInterceptor.java:506)
at org.apache.tomcat.core.ContextManager.processRequest(ContextManager.java:968)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:875)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
at java.lang.Thread.run(Thread.java:536)

Hi!
Yes! You should create induction subdirectory in classes or
archive induction subdirectory in a jar file and store it in lib
subdirectory.
Bye

Importing my own movies to ipod

Can someone tell me how to import my own home movies to ipod. I am new to this. Rob

Can someone tell me how to import my own home movies
to ipod. I am new to this. Rob
Use iTunes. Import the video file as you would a music file, right click on it and click "Convert Selection for iPod".

How can I create a template that does not have automatic formatting but my own?

I have just switch to a Mac from a PC and am having a terrible time with pages. All I want to do is create my own template that has NO AUTOMATIC FORMATTING so I can do my own.
There is nothing in the HELP sections on how to delete the automatic formatting. I do not want to use any of their Outline Templates just make up my own.
I would be so so grateful if someone could help me with this. I took a one-on-one and his idea of how to get rid of formatting in my own template DID NOT WORK!
Thanks, Deborah

Deborah
Hard to see your problem, and if there is something THAT DOES NOT WORK! it would obviously be useful to know WHAT that is and WHY you believe it does not work, so we can ACTUALLY RECOMMEND A SOLUTION.
Just select any text and change it to whatever you want using the toolbar and/or the Text inspector.
The Outlines are just a view of your text, in a form that lets you easily organise and move it around.
Menu > View > Show Styles Drawer
Reveals whatever style has been applied to a heading or text and you can update or create new styles by clicking on the small triangle next to it > Redefine style from selection
When you are finished just save it as a Template.
Peter

How to import idvd templates into DVD SP4?

How can I use idvd templates in dvd studio pro 4??? How do i import them?
Thanks,
Steve from NY

Versions iDVD5 and forward will not import.

How to import DSIA STIG baselines/templates into SCM?

Hello,
I have been playing with both Security Compliance Manager as well as System Center ConfigMgr Extensions for SCAP tools to determine how I can import DISA STIG Inf files.
My end goal is to be able to use SCCM DCM to check/manage compliance for some of these pre-defined security standards such as DISA STIGs.
I read in an earlier post that MSFT is currently looking into allowing INF imports into SCM. Is there any idea on when this might be available or IS there another approach I can take?
Thank you,
Manoj

Jason/ Experts,
I see you marked this as answer. I am trying to use Windows 2008 R2 STIG -Version 1, Release 12
from http://iase.disa.mil/stigs/os/windows/Pages/2008r2.aspx. On extracting the file u_windows_2008_r2_v1r12_stig,
I get the folders and files as below:
I extract the U_Active_Directory_Domain_v2r4_Manual_STIG and see the files as DoD-DISA-logos-as-JPEG(jpeg), STIG_unclass (XSL) and U_Active_Directory_Domain_v2r4_STIG_Manual-xccdf (XML)
I am using Microsoft Security Compliance Manager (3.0.xx) to import the GPO. The DC folder has no .inf files that Microsoft claims to be load to SCM (from v2 onwards). However there is a templates folder, Templates - 2008 R2 that has setup files
as seen below. These cannot be loaded to SCM with the Import GPO function.
Now I am not sure how this is marked an answer and I can't find a solutions from Microsoft on how to import the settings to load the DISA STIGS into a Group Policy. If the solution is to MANUALLY enter the policies and export into a GPO Pack and
Import, it is time consuming though it can be done and will take considerable amount of time. I can't see Microsoft providing that as a solution. So how could I get this? Is there a tool to do this?
I will appreciate a solution/ suggestion/ advice that will enable us to load the DISA STIGS to group policy that can be applied to AD DC.
Thanks
TIA TP

How do I import a book template in Lightroom 4?

I've exported a book I've created as a PDF. Now I would like to import that book template to a different Lr4 user...how do I go about that? I've tried exporting it as a catalog, that works except that's a pain in the butt to do just for a book - and also all my images go with it too! Not good! Help!

Maybe you're asking can you reuse a layout.. Here's a way:
Right click on the book and choose Duplicate.
Select the Duplicate book in Collections.
Go to Grid.
Select all, and delete from collection.
Go back to book and you'll have an empty book.

How do I use my own templates when saving DITA map as FM 11 book w/ components?

I have updated the ditafm-output.ini file in the following places:
[BookWithFM-Chapter]
[BookWithFM-TOC]
[BookWithFM-Index]
[BookWithFM-ListofFigures]
[BookWithFM-ListofTables]
[BookWithFM-BookTitle]
In each I used the following information for my Template file path:
Template=$STRUCTDIR\xml\DITA_1.2\app\technicalContent\template\Book_Templates\templateChap ter.fm
However, when I saved my DITA map as a FM 11 book with components, it still used the standard DITA templates, rather than my own templates.
What am I doing wrong?
Marsha

The program can't start because MSVCR80.dll is missing from your computer
Many thanks. Rather than the Apple document, I currently recommend using the instructions from the following user tip with that one:
Troubleshooting issues with iTunes for Windows updates

How does one import an html template into Adobe Muse?

I have downloaded several templates advertised as Muse templates but they all appear to be html5 templates. Can one import them into Adobe Muse?

You can't import an HTML template. You need the original .muse file. If they are Muse templates you would have gotten them as a .muse file.

PA_CONTRACT_XSLFO: How to invoke a RTF-template with related data template

Dear Reader,
actually I want to extend the standard Document Type Layout for a Purchase Agreement Contract with additional data from approved supplier list (ASL).
Therefor I have created a RTF-template and a data template with the needed sql-statement. For testing I put this in a standalone concurrent programm and it works fine (result was a blue table with all data rows).
Next step for me was to invoke the RTF-template into the PA_CONTRACT_XSLFO template for extending the Document Type Layout for my Purchase Agreement Contract. So I put the neede invoke-statements
<xsl:import href="xdo://XXOC.XX_RTF_TEMPLATE.de.00/"/>
and
<xsl:call-template name="XX_RTF_TEMPLATE"/>
into the XSLFO-template. Also I extend the RTF-template with the define template statement
<?template:XX_RTF_TEMPLATE?>
So all seems to be fine.
As result I get the standard document for Purchase Agreement Contract with the additional blue table from RTF-template BUT WITHOUT DATA !
From my point of view there is no execution of the sql-statement in data template. But I dont know why.
Do Oracle support a combination of XSLFO-template with data template?
[XSLFO-template] with related [XSD-data definition]
calls [RTF-template] with related [data template (with included sql-statement)]
Thanks for your help.
Best regards
Mario.

How to call a rtf template from another rtf template by passing a value try in main template create hyperlink of url with parameters for another template
http://bipconsulting.blogspot.ru/2010/02/drill-down-to-detail-or-another-report.html
When user pull a quote report from siebel this new rtf template should attach to the quote at the end.it'll be only another report
IMHO you can not attach it to main. it'll be second independent report
you can try subtemplate but it's not about rtf from rtf by click
it's about call automatically rtf subtemplate from main rtf based on some conditions
for example, main template contain some data and if some condition is true then call subtemplate and place it instead of its condition

How to create a page template?

Hi!
I need to create a page template. There are any templates and the page preview option show an overview about the region and areas these. I would like to create a based page in this template. I think that I should know:
1 - How to create the shortcut?
2 - How to create the page template?
3 - How to assign a region with a page template?
Priscila Britto

Hi people!
I get to resolve any items. Anything important are:
- you can to view a structure of page template. The first you view it in the menu Shared Components >> Templates. There is a icon in the column "Preview" for the page, report and region template items. In the click on the icon you can view a template structure that should be shown in the execution.
- You can view where will be inserted a region on the option "display point". You need to click on the icon in the right of the "display point" option;
Well, If you pay attention in the two options you will know how to modify a template and how to create.
Priscila Britto

I can't delete my templates in iPages now that I am running Lion.

I can't delete my templates in iPages now that I am running Lion.
Any Suggestons? There is no Application support or Library folder in my home file.

These folders are hidden because many users did odd things with them.
Here are three ways to get rid of that.
(1) go to to the menu "Go to" (Aller in French) and type :
~/Library
(2) press option and go to the menu "Go To". The item Library will be available
(3) run this AppleScript
--{code}
do Shell Script "chflags nohidden ~/Library"
--{code}
This one unhidde the folder so you need it only once. Keep the script because maybe an update may reset the hidden flag.
Tips borrowed from mac4ever
Yvan KOENIG (VALLAURIS, France) jeudi 21 juillet 2011 18:32:33
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to import my own template to iPages

Similar Messages

Maybe you are looking for