How to import nef and psd versions of the same file ?

Hi, I am new to this so please forgive any daftness. I am trying to import from a folder with nef and psd versions of the same file. Lightroom does not seem to recognise the nef if a psd exists. In fact if I specifically try to import the nef later, I get the message that says lightroom will not import the file because it already exists. The import is set to keep the originals in the existing location and the database is new. This is the first import I have done and noticed that the file count did not match.
I need to do this because I need to create alternative psd files from the same raw file but I do not see how.
The psd were created via the bridge to photoshop route.
Please what am I doing wrong ?
Many thanks

Hi thanks for the quick reply. For a "database" application that seems a bit scary. Also I have found that it will import psd and tif and jpg versions of the same file which makes it even odder.
Do you know if there is a way to tell it to favour nef rather than psd ?
thanks,

Similar Messages

  • Can I run Release Candidate (19.02), Beta, Nightly, Aurora and ESR versions on the same computer?

    I know I can run the Beta and Nightly together on the same computer because they are installed in different directories. What I do then is that I have a Profile for each version. What I do is I run FireFox.exe -ProfileManager when I start either the Beta and Nightly builds.
    My Question is can I also install the Aurora, Release Candidate and ESR versions on the same computer like I do with the Beta and Nightly? If so, how do I go about installing them in different directories? I will create new profiles for each version. What I then do is, copy everything in my original Profile to the newly create profiles so I can keep all my plugin/addons, themes, bookmarks, etc. the same.
    Next question, (I think I know the answer but I just want to make sure) now can I sync my bookmarks from each of the different profiles that I created?
    Secondly, I now I can do the ABOUT:CONFIG in the address bar of Firefox, does anyone have any idea where I can read up on what each entry means? Also, are there any other secrets in Firefox, similar to the ABOUT:CONFIG trick? I know of one app where you can do ABOUT:ME, but that's all I know.
    I know this has been asked billions of times, but I also have to ask. Is there any chance at all that Firefox, Thunderbird, and/or Seamonkey will be ever release for the iOS from Apple? I know that it's impossible, but maybe someone MIGHT have some positive thoughts on this?
    Lastly, I know this is off topic, but I'll give it a shot. I'm using Outlook 2013, does anyone know if Outlook can handle Newsgroups? The reason why I ask is because I've just learned that there are a ton of newsgroups for Firefox, ThunderBird, and SeaMonkey. I would like to, somehow, get those Newsgroups in Outlook 2013. I already get allot of the feeds for other things, so that's not a problem.
    I would appreciate it very much if anyone could help me with these issues.
    Thank You.

    You can consider to use Firefox Sync to sync all the profiles.
    You can do a custom install of each version and install each version in its own program folder.<br />
    Safest is to modify the desktop shortcut and add -P "profile name" to the command line to start each version with its own profile.<br />
    Be careful with clicking a file in Windows Explorer to open the default browser, so make sure to select the correct profile in the profile manager and check the don't ask setting.
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager
    * http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

  • Using different templates for the desktop and phone versions of the same blog

    I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
    I have created both a desktop and a phone versions of the site.
    I  want to know how I can integrate the blogs that I  currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
    My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
    I  have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
    To recap my problem, I basically  need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
    Thanks.

    There can be few reason for this, including page contents links or contents used in phone/tablet version.
    Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
    Thanks,
    Sanjit

  • How to burn DVD and can i burn the same DVD later if its having any space..

    How to burn DVD and can i burn the same DVD later if its having any space..?

    This is called sessions, but it is not recommended and has been largely abandoned by software developers. This was a good thing in the late 1990’s, when opticals discs were quite expensive, and file size quite low.
    applications which reportedly may do this are
    - isoBurn: http://www.macupdate.com/app/mac/40109/isoburn
    - others, I do not remember which ones, try SimpyBurns, Burn, Dragon Burn and LiquidCD, you will find all in macupdate.com, test which ones suit you.
    Otherwise, I do not recommend you such time consuming and inefficient solutions, optical drives are being replaces by more capacitive, cheaper and more practical solutions, like external disks. But, if you insist, you will find what you are looking for.

  • Synchronous and asynchronous IO on the same file descriptor

    Hi does any body knows about problems in combining synchronous and asynchronous IO on the same file descriptor? It appears that I may miss SIGIOs in that case.

    I don't think there is any real easy way to do an insert. If writing to a file, I would use a FileWriter, a FileOutputStream, or a RandomAccessFile class. I don't know of any class that will automatically do an insert so you might have to write your own method that does this. This is pretty easy: use RandomAccessFile might be the best for most situations for doing this (ie, if you are inserting many times at different locations in the file). Just copy all the bytes from the point in the file you want to insert to the end of the file, and then write your bit, and then rewrite all the read bytes to the file again. Depending on how many times you are writing to the file and how big the file is, you may want to keep the file in memory at all times because writing to disk is extremely slowwww. If the file is huge, and you are inserting seldomly, then do what I said above. If the point of insertion is closer to the start of the file, then it might be a good idea to do the above but instead of copying the bytes from the point of insertion to the end of the file, copy the bytes from the start of the file to the point of insertion.

  • Is there any way i can keep pages documents and numbers documents in the same file?

    Im trying to group pages and numbers documents in the same file is this possible?

    Not on the iPad itself, no. iOS apps keep their documents within each app itself. You would need to save the documents to a WebDAV server. Dropbox can serve this function if partnered with DropDAV. See:
    http://techinch.com/blog/integrate-dropbox-with-pages-keynote-and-numbers-on-ipa d
    Regards.

  • How to run 2 different Firefox versions using the same profile

    Is it possible to run 2 different Firefox versions using the same profile and still have browsing history saved? I used to be able to do that up until a week ago. What happened was I was using Firefox version 3.6.28(a very old version of Firefox) which I need to use sometimes and then the current version, 36.01. Earlier I would use both my versions of Firefox and the history would be saved if I used both versions but now when version 36.01 came out, its not saving for some reason. Is this a bug? The history is saving during the current session, but say I close out of Firefox and then go back to Firefox, it will still be saved but when I go to my old version of Firefox, the history is saved but then after I close out of that the history on my new current version is all gone and it starts me all fresh, is there a way to get rid of this so that the history will always be saved even if i switch between versions? I could do that before up until Firefox 35.01 but Firefox 36 isnt saving the history from the old version, is this a bug or not? Now I have to create a separate profile for each Firefox so the history I use on the old version is only saved on that version and the history I have on the new Firefox is another profile so that history from the 2nd profile remains but I dont want that. I want to be able to use the same profile so that the same browsing history can be saved using both versions like it was before, I hope people can understand my problem. If not I can further explain, thanks.

    @ the-edmeister, I understand that the 2 versions are completely different, however how come the history was saving fine when I switched between firefox 3.6.28 to the current one which was Firefox 32, 33, 34, 35 etc? Like I'm surprised how come now at Firefox 36 this problem started, Firefox 36 isnt that much different from Firefox 35 but yet Firefox 35 was still saving my browser history from the old 3.6.28 version, my 3.6.28 version never upgrades but the new Firefox keeps upgrading whenever there is a new release out automatically and then all of a sudden when the new version of 36.01 came out all my history was gone, so isnt Firefox 35.01 also very much different from 3.6.28 as much as 36.01 is? I hope you got what I meant, thank you for helping.

  • How can I save images and text data to the same file?

    I have been looking at ways to do this for a while. My main VI saves the raw data to a text file which the users then import to Excel and plot. I am trying to simplify this process and have been looking at ways to accomplish this task. I want to be able to save the raw data to a file and then save the Labview graph as well. This will eliminate the tedious task of importing the raw data into Excel and plotting it. I can save the raw data to its own file and I can use the Get Image method for the graph and save it to its own file. I am currently using the .png format. Is there a way of saving both to the same file ie, importing the image into Excel or Word etc. Before I go off doing a science project I wanted to see if anyone else had experience completing this task and had any recommendations. Thanks in advance for any help.

    well ther are a couple of ways. You could use the standard report generation VI's and make a complete report with the image of the graph embedded into the report with the raw data or you could use activeX and control excel thru LV and put the raw data into excel directly and have excel graph the data without any user interaction. I have posted a slew of VI's on the excel board if you do not have the report generation toolkit. If you could tell me which way you want to go I could possibly send you an example.
    For more information and some sample VI's and tool kits, you can go to the excel board
    Joe.
    "NOTHING IS EVER EASY"

  • How to install more CUCCX Editor versions on the same PC?

    Hello,
    is there a workaround to install more CUCCX Editor versions (e.g.: 4.x, 7.x, and 8.x) on the same PC?
    In fact, when a CUCCX Editor is already installed, we have to uninstall it before installing another version.
    TIA and Regards.

    Hi,
    I am hoping that you are trying to install Editor on some client PC, because you can not install Editor on the UCCX box, as you know that by default UCCX install has installed the Editor also.
    Do not manually install the Cisco Unified CCX Editor on a server that is running Cisco Unified CCX. The Cisco Unified CCX Editor application is installed by default when you install Cisco Unified CCX and you will receive an error message if you try to reinstall it.
    Reference:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/installation/guide/uccx70ig.pdf
    Hope it helps.
    Anand
    Please rate the helpful posts!!

  • How can my wife and I both use the same iCloud account for our respective iPhones so we can share information and music?

    Trying to set up both my wife's and my iPhone on the same iCloud account so we can share info.  Is this possible?

    Hi tsmithfsj,
    If you have questions about setting up iCloud on multiple devices, you may find the following site helpful:
    Apple Support: iCloud Setup
    http://www.apple.com/icloud/setup/
    Cheers,
    - Brenden

  • How to save 2 versions of the same file in Pages

    Gave the file a new name and it over-wrote the first file.

    The right approach is to use Pages > File > Duplicate. This opens a new window with a copy of your original Pages document. Below is a screen shot showing the duplicated window parked right over the original document. Notice that downward facing triangle adjacent to the duplicated (filename copy)? Click that, and a dialog pops up with the filename highlighted. Just type in the second filename that you want (e.g. berserk.pages) and press return. The default location remains the same as the original file.

  • Can I import 2 sets of photos with the same file name numbers?

    I've inadvertantly not had my camera set to "continuous" for file names and now have 2 memory cards with 2 different sets of images with the same file names.
    Can I still import both into Lightroom 2 without problems?
    What are the consequences?
    Thanks
    Stuart

    Yes. Of course, two files with the same name cannot be in the same folder. And don't forget to uncheck Don't import suspected duplicates during import.
    Another thing is that's not a good idea for good asset management, because someday you'll make some mistake because of this ambiguity. Good DAM practices suggest renaming your files after or during import, so that each files has a unique name across your entire image archive.

  • How can I merge multiple versions of the same file?

    I have a number of PDF ebooks that I read on multiple devices, and I highlight selections of interest, then save the modified files. Using Acrobat  XI, is there a straightforward way to merge all of these changes into a single master file for each book?
    For example, I read and highlighted Chapters 1 and 2 on my home computer, and Chapters 3-6 at work. I'd like to merge the home and work files (which are identical apart from the highlighting) so that I have a single file that's highlighted in Chapters 1-6. These tend to be large files, so comparing them manually page by page isn't really an option.
    Any help you could offer would be gratefully received. Thanks!

    Yes, it's possible.
    Open a file and click on the Comment button to open the panel. In the Comments List click on the Options button and select "Export All to Data File...". Save the file somewhere on your computer. Do the same for the other files.
    Now open a blank version of the file and do the same but select "Import Data File..." from that menu. Select all the files you've saved and you'll have a merged version of all the comments from the various versions.

  • HOW TO IMPORT DATA MORE THAN ONCE FROM THE SAME EXPORT DUMP FILE?

    before asking my question i'd like to mention that i'm a french spoke...
    so my english is a little bit bad. sorry for that.
    my problem is : IMPORT
    how to import data a SECOND TIME from an export dump file within oracle?
    My Export dump file was made successfully (Full Export) and then i
    tried to import datas for the first time.
    I got this following message in my logfile: I ADDED SOME COMMENTS
    Warning: the objects were exported by L1, not by you
    . importing SYSTEM's objects into SYSTEM
    REM ************** CREATING TABLESPACES *****
    REM *********************************************
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "USER_DATA" DATAFILE 'E:\ORANT\DATABASE\USR1ORCL.ORA' SI"
    "ZE 3145728 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAX"
    "EXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "ROLLBACK_DATA" DATAFILE 'E:\ORANT\DATABASE\RBS1ORCL.ORA"
    "' SIZE 10485760 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS "
    "1 MAXEXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
    etc........
    IMP-00017: following statement failed with ORACLE error 1119:
    "CREATE TABLESPACE "L1" DATAFILE 'E:\ORADATA\L1.DBF' SIZE 1048576000 "
    "DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAXEXTENTS 121 PCTIN"
    "CREASE 50) ONLINE PERMANENT"
    IMP-00003: ORACLE error 1119 encountered
    ORA-01119: error in creating database file 'E:\ORADATA\L1.DBF'
    ORA-09200: sfccf: error creating file
    OSD-04002: unable to open file
    O/S-Error: (OS 3) The system cannot find the path specified
    --->etc..........
    the drive E: with the folder E:\ORADATA didn't exist, but after
    all that i created it.
    see below, before my IMPORT statement
    REM ********************* CREATING USER *********
    REM ********************************************
    IMP-00017: following statement failed with ORACLE error 959:
    "CREATE USER "L1" IDENTIFIED BY VALUES 'A6E0DAA6865E7627' DEFAULT TABLESPACE"
    " "L1" TEMPORARY TABLESPACE "TEMPORARY_DATA""
    IMP-00003: ORACLE error 959 encountered
    ORA-00959: tablespace 'L1' does not exist
    IMP-00017: following statement failed with ORACLE error 959:
    "CREATE USER "MLCO" IDENTIFIED BY VALUES '56AC6447B7D50467' DEFAULT TABLESPA"
    "CE "MLCO" TEMPORARY TABLESPACE "TEMPORARY_DATA""
    IMP-00003: ORACLE error 959 encountered
    ORA-00959: tablespace 'MLCO' does not exist
    ETC.......
    REM ********************* GRANTING ROLES ***********
    REM ************************************************
    IMP-00017: following statement failed with ORACLE error 1917:
    "GRANT ALTER ANY TABLE to "L1" "
    IMP-00003: ORACLE error 1917 encountered
    ORA-01917: user or role 'L1' does not exist
    ETC.........
    IMP-00017: following statement failed with ORACLE error 1918:
    "ALTER USER "L1" DEFAULT ROLE ALL"
    IMP-00003: ORACLE error 1918 encountered
    ORA-01918: user 'L1' does not exist
    -- that is normal, since the creation of the
    tablespace failed !!
    REM******************************
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLLBACK SEGMENT RB_TEMP STORAGE (INITIAL 10240 NEXT 10240 MINEXTENT"
    "S 2 MAXEXTENTS 121) TABLESPACE "SYSTEM""
    IMP-00015: following statement failed because
    . importing SCOTT's objects into SCOTT
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "EVT_PROFILE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999"
    "999999 INCREMENT BY 1 START WITH 21 CACHE 20 NOORDER NOCYCLE"
    ETC............
    importing L1's objects into L1
    IMP-00017: following statement failed with ORACLE error 1435:
    "ALTER SCHEMA = "L1""
    IMP-00003: ORACLE error 1435 encountered
    ORA-01435: user does not exist
    REM *************** IMPORTING TABLES *******************
    REM ****************************************************
    . importing SYSTEM's objects into SYSTEM
    . . importing table "AN1999_BDAT" 243 rows imported
    . . importing table "BOPD" 112 rows imported
    . . importing table "BOINFO_AP" 49
    ETC................
    . . importing table "BO_WHF" 2 rows imported
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLE "DEF$_CALL" ("DEFERRED_TRAN_DB" VARCHAR2(128),
    IMP-00015: following statement failed because the object already exists:
    "CREATE SYNONYM "DBA_ROLES" FOR "SYS"."DBA_ROLES""
    IMP-00015: following statement failed because the object already exists:
    "CREATE SYNONYM "DBA_ERRORS" FOR "SYS"."DBA_ERRORS""
    IMP-00008: unrecognized statement in the export file:
    . importing L1's objects into L1
    IMP-00017: following statement failed with ORACLE error 1435:
    "ALTER SCHEMA = "L1""
    IMP-00008: unrecognized statement in the export file:
    J
    Import terminated successfully with warnings.
    -------------------------------------b]
    So after analysing this log file, i created
    the appropriate drives and folders... as the
    import statement doesn't see them.
    E:\ORADATA G:\ORDATA etc...
    And i started to [b]IMPORT ONE MORE TIME. with:
    $ IMP73 sys/pssw Full=Y FILE=c:\temp\FOLD_1\data_1.dmp BUFFER=64000
    COMMIT=Y INDEXFILE=c:\temp\FOLD_1\BOO_idx.sql
    LOG=c:\temp\FOLD_1\BOO_log.LOG DESTROY=Y IGNORE=Y;
    after that i could not see the users nor the
    tables created.
    and the following message appeared in the log file:
    Warning: the objects were exported by L1, not by you
    . . skipping table "AN1999_BDAT"
    . . skipping table "ANPK"
    . . skipping table "BOAP"
    . . skipping table "BOO_D"
    ETC.....skipping all the tables
    . . skipping table "THIN_PER0"
    . . skipping table "UPDATE_TEMP"
    Import terminated successfully without warnings.
    and only 2 new tablespaces (originally 3) were
    created without any data in ( i check that in
    the Oracle Storage manager : the tablespaces exit
    with 0.002 used space; originally 60 M for each !!)
    so,
    How to import data (with full import option) succefully
    MORE THAN ONE TIME from an exported dump file ?
    Even if we have to overwrite tablespaces , tables and users.
    thank you very much

    The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the appropriate Database forum.
    The main URL is:
    http://forums.oracle.com/forums/index.jsp?cat=18

  • How to provide date and time stamp to the extracted file.

    I 'm downloading data from DB to Flat file using GUI_DOWLOAD. whenever it is executed it is creating with a file name.
    if i rerun the program the file is overwriting with the same name.
    now based on the requirement how many times i executed, that many times file should be individually created and should be added with date and time stamp.
    like
    if when i executed  at the very first time it should saved with filename, date and time.
    say "Address.txt 04/05/2007 07:55:10"
    When i executed it for second time it doesn't overwrite the file.
    it should create a new file.
    like "Address.txt 04/05/2007 07:59:20".
    Please guide me the way if possible code.
    Thanks in advance.

    Hi Vamsi,
                   Use FM 'F4_PROGRAM' to take file from the user .
    In this case user will enter the file name. u can append date & time to that file path.
    Refer this code.
    CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          PROGRAM_NAME  = SY-REPID
          DYNPRO_NUMBER = SYST-DYNNR
        IMPORTING
          FILE_NAME     = P_P_FILE.
    concatenate P_FILE '04/05/2007 07:59:20' into V_FILE.
    CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                        = v_file
         filetype                        = 'ASC'
          write_field_separator           = 'X'
        TABLES
          data_tab                        = i_tab
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IF sy-subrc = 0.
        MESSAGE i002.
      ENDIF.
    Reward points if helpful.
    Regards,
    Hemant.

Maybe you are looking for