How to import search engines from Opera automatically?

I already asked this question here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2178107. Basically, I want to import all custom search engines that Opera browser saves in "search.ini" file to FF. I got used to them. Is that possible?

I just took a look at the search.ini file in my Opera 11.00 installation, Firefox has no way to process that information. Firefox uses Open Search & Sherlock search plugins, that are in the XML format. It looks like Opera has its' own format for search "plugins", rather than using "standard" plugins that most other browsers use.
You can create your own Open Search Plugins from the data contained in that search.ini file using the instructions here. <br />
https://developer.mozilla.org/en/Creating_OpenSearch_plugins_for_Firefox
Or you can install similar Search Plugins from this site. IMO, the search engine on this website works quite well, to sort through the tens of thousands of search plugins available.<br />
http://mycroft.mozdev.org/

Similar Messages

Running Firefox 10.0.2, cannot add new search engines from Mycroft Project. Error message: "you will need a browser which supports opensearch to install this plugin" Please help with steps on how to fix this issue in Firefox, thank you

Can't add new search engines from Mycroft Project in FF 10.0.2. Error message states: "you will need a browser which supports opensearch to install this plugin"

You're welcome.
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to implement search engine for pdf file.

Hi
I am newbie to AIR technolgy .how to implement search engine . when i enter the name of file in search box , it should fetch correspoding the pdf file .
Please help me out
Thanks
Mohan

Hi sekhar,
Your Requirement can be implemented by OVS(Object Value selector) This is the custom search help .So that you can define on what basis the value has to be fetched.
Look at the below link
http://wiki.sdn.sap.com/wiki/display/WDABAP/ABAPWDObjectValueSelector(OVS)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
You need to use the component WDR_OVS.
It has 3 phases
In phase 1
     You will fetch the value from input field to F4 help dialog box.
In phase 2
     You will generate the search results , in this phase look for the input value given in field 2 and accordingly generate search result for the field 3.
In phase 3
     The selected value will be returned to the original screen.
Regards
Karthiheyan M

Help get rid of Bing search engine from macbook pro os 10.7.5

Help me get rid of Bing search engine from macbook pro os 10.7.5
fmartn67

You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that the Version is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password. Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller, while lying about what it does. As he knows and intends, the uninstaller does not completely remove the malware.

Can someone please tell me how to import a photo from my iPhoto library into Photoshop Elements 11. o library

Can someone tell me how to import a photo from my iPhoto library into Photo Shop Elements 11. When I am in Photo Shop Elements and I go to import the only option is to import from a camera. I want to import a photo from iPhoto. If I can't figure this out Photo Shop Elements is totally useless to me.

Not sure what you are trying to do
If you want to use PSE as an editor for iPhoto then set it in the iPhoto preferences (you need to search the forums for the exact settings - they are not obvious)
The general answer to yoru question is to import a photo form iPhoto to any other program is to select the photo in iPhoto and export to the desktop and import from there
Please explain what it is taht you want to do
LN

How to remove search engines ?

Hi ! In Firefox seems to be only the possibilty to ADD search engines but I can't find how to remove search engines. So for instance: Ask .com searchbar seems to be integrated in the Firefox S/W and not possible to remove, but pops up automatically. If this is the case I've to use another browser because I 've no intention to to use Ask.com. Pls comment! Wbr/ Rolf

See http://forums.mozillazine.org/viewtopic.php?f=38&t=627084&p=5069645#p5069645

Does anyone know how travel meta search engines work? (kayak,mobissimo)

Does anyone know how travel meta search engines work? like (mobissimo,kayak,TravelJungle.co.uk)

Thanks for your reply BalusC
i agree with u.
the sites like kayak, mobissimo are using spider tool to get data from other sites(airline site, etc..).
and they are using jquery with php pages. these sites are airline ticket booking sites.
my questions are:-
how can they get flight information without any GDS help?
can a spider program/tool fetch the realtime data?
i had experience in implementation of client side web services for GDS(worldspan,amadeus).
but i am not have any experience with travel meta search engine applications..
thats way a need help from seniors...

For some reason is all my music gone from iTunes, but I do still have the songs on my iPod Touch... So my problem is that I don't know how to import my files from iPod Touch back to iTunes.

Hey all
I should export my music to another program, because I do also have this MP4, which needs some files. Well, I did that and it seems like Windows Media Player couldn't open the files, but then I go back to iTunes and I see all my files are gone. Nothing is left, and now I can't syncronize files to my iPod Touch without deleting all the existing files. So now the only thing I want to know, if it's possible, is how to import music (not from Apple Store) from my iPod Touch to iTunes?

You can use one of the third-party programs discussed here to transfer non-iTunes purchased music to a computer.
new PC: Apple Support Communities

How to import a logo from flat file to SAP in SMARTFORM.

how to import a logo from flat file to SAP in SMARTFORM. i need to know whether TIFF format is used and also the full steps.
Thanks,

Hi,
You can not directly use a logo from a file into a Smart form. First you will have to upload it to SAP. This has to be done only once. Once it is imported into SAP then you can use it in smart form. To import a logo to SAP, goto SE78. Open the tree under GRAPHICS. Select the file type and click on the Import (first button on the toolbar, just before delete button). Select the logo file and give it some appropriate name along with description. Select appropriate type of the image and click Continue. Your logo will be uploaded into SAP from a file. Now in your smartform, Create a Graphic Node, give the name of the logo along with other properties. In this way you can import a logo from a flat file into SAP and consequently in a smart form.
Reward points if the answer is helpful.
Regards,
Mukul

How to import a function from JS to a JSP

how to import a function from a JS to a JSP?

You cannot. You need to distinguish that those are two completely different languages. Javascript is a client side language which is only executed on the client and JSP is a server side language which is executed on the server before it arrives to the client. You can invoke each other indirectly, but you cannot use them simultaneously.

How to import Essbase app from 7.1 to 11.1.2.1?

Hi,
I need for migration my environment from Essbase 7.1 to 11.1.2.1.
How to import Essbase app from 7.1 to 11.1.2.1?

To import Essbase Application:
Copy .Otl from source to destination to copy outline
Re: how to import an .otl file in essbase
Copy .csc, .rul etc.. as well
for data: export and import from EAS.
Cheers..!!!

Use of KM services and TREX Search Engine From share point portal

Hi All,
We would like to Use of KM services and TREX Search Engine From share point portal.
For this purpose we interoperability between windows sharepoint and SAP Portal.
Please provide necessary documents or suggestions for interoperability for above requirement.
mail id : <b>[email protected]</b>
Thanks in advance
Regards
Swarna B

Hi,
See this this links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e891378-0601-0010-5386-a3387f1b161b
Regards,
Senthil K.

How to import payroll result from 3rd party system to SAP

Hi Experts,
May i know how to import payroll result from legacy system / 3rd party payroll system into SAP.
i need to import the payroll result from Jan - April (from 3rd party payroll system) and system go live on May. I using payroll malaysia.
Thanks.

check this link
http://help.sap.com/saphelp_40b/helpdata/en/91/80e9087834d111a4620060b03c3b0e/content.htm

How to import select photos from Iphoto into Adobe Elements

How to import select photos from Iphoto into Adobe Elements

If you wish to import in Elements Organizer here is the guide to help you out with all you need to use iPhoto and Organizer. http://helpx.adobe.com/elements-organizer/using/import-media-iphoto-library-mac.html
If you wish to set PSE Editor as your editor for iPhoto images then here is the help link to guide you for the same - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html
Hope it helps.
Thanks,
Garry

When I plug in my iphone to my mac to charge/sync, iphoto always opens and takes a time to close. How do I stop iphoto from opening automatically please

When I plug my iphone into my mac to charge/sync, iphoto always opens before itunes and takes a time to close. How can I stop iphoto from opening automatically please

In iphoto go to preferences > general and al the bottom will be a drop down menu that will say connecting camera opens: just change this from iphoto to no application

How to import search engines from Opera automatically?

Similar Messages

Maybe you are looking for