How to import Sony Z1 and A1 tape based files to FCP X?

Apple support have today told me (eventually) that footage from the Sony HVR Z1 and A1 and the GoPro Hero 2 cameras are not suppported by FCP X, they suggest using a 3rd party convertor, this will add considerably to the time bringing data into the package.
How do others get over this issue as I am assuming that others are using Sony HVR & GoPro cameras as they are market leaders.

Who exactly at Apple support told you this? Z1 and A1 are HDV cameras and are covered by this note
Final Cut Pro X is compatible with most MiniDV tape-based camcorders using DV and HDV formats, which use a FireWire (also known as IEEE 1394 or i.LINK) cable to transfer video.
The GoPro media can be imported an optimized on import. The audio from the cameras is not suitable for FCP, but most people don't use audio from these cameras. If you need audio and video you can batch convert with Compressor or MPEG Streamclip.

Similar Messages

  • How to import sony video on i-pad

    How to import sony-cam videos on i-pad's imovie

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad into Recovery Mode
    http://support.apple.com/kb/ht1808

  • How to import seeburger adapter and mdm adapter in sap pi 7.3

    Hi all,
    how to import seeburger adapter and mdm adapter in sap pi 7.3

    Hello
    To import the Seeburger adapters, follow the instructions in the Master Installation guide and the individual guides for each of the adapters. These are available with the Seeburger software downloads.
    Regarding the MDM adapter, this is the wrong forum for that question. Try the MDM forum (but first, try searching the forum as this is a very basic question).
    Regards
    Mark

  • How to import a image and compare with another image to find their deviation

    i am new to labview , can anyone tell how to import a image and compare  it with another image  to find their deviation
    Solved!
    Go to Solution.

    This is an quite easy task using the Vision Development Module.
    There you can acquire images from cameras or read them form the harddrive, then differntiate them or since VDM 2010 calculate the optical flow between consecutive images.
    Christian

  • How to import Sony XDCam material to FCPX in Yosemite?

    HI!
    I know there is already this link : http://www.fcp.co/final-cut-pro/news/454-apple-post-how-to-import-sony-xdcam-med ia-into-fcpx
    Having tried it, it doesn't seem to be up to date with Yosemite. Any suggestions?

    Did you download version 1.2?
    Russ

  • On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

    On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

    It's either in local folders, as it seem you had been doing, or in icloud.  If you go into the mac's Pages and view the icloud files, you can drag on onto another to create a folder.  But you can only have folder one level deep, so you can't organize your files/folders like you can on a mac, using nested folder several levels deep.

  • How to import a table which is in mdb file(same table in different mdb's)

    Hello,
    how to import a table which is in mdb file(same table in different mdb's)
    e.g. table 'EMPLOYEE' is in 'test.mdb' the same table 'EMPLOYEE' is in 'current.mdb'
    How this can be done on click of a button on my form if the path of mdb is provided?
    Thanks

    This question is not related with ora dev forms, its about Microsoft Access.
    Use import option (File >> Get External Data >> Import)
    or use TransferDatabase action.

  • How to import Sony DCR-SX85 video into iMovie.  Doesn't do it automatically and using Mpeg stream lip didn't help.  I have iMovie HD 6.0.3

    Can't import Sony DCR-SX85 video into iMovie HD 6.0.3.  MPEG stream clip didn't work.  This has been discussed before, but I haven't found a solution yet.

    Can't import Sony DCR-SX85 video into iMovie HD 6.0.3.  MPEG stream clip didn't work.  This has been discussed before, but I haven't found a solution yet.

  • How to Import Garageband projects and files into Cubase for Windows?

    Hi
    I've recently started using Garageband to record my ideas and compositions. I had 2 main questions:
    1. How do I transfer the audio files created in Garageband in a format which will allow me to edit them in Music Software for a Windows based Operating system? Tranferring them to iTunes and then converting them to MP3 doesn't help because then my friends can't edit my guitar parts and other backing tracks.
    Mainly I need to know how to save and import Garageband projects and individual tracks into Cubase/ Cakewalk for Windows so that my band guys can edit the tracks and send me their ideas.
    I'm the only one out of my friends who has an Apple Macbook and most of my band guys still use Windows based Operating systems.
    2. I record my guitars and other instruments using the Digitech GNX4 guitar effects processor as the sound source through USB. While I can record clean guitar without any problem, the moment I switch on the distortions on the GNX 4, there is a loud and constant hum from the speakers. I am therefore not being able to record distorted guitar sounds.
    Please help on this.
    Thanks and hope to hear from you all.
    Cheers
    Prash

    Tranferring them to iTunes and then converting them to MP3
    same as the protools procedure:
    http://www.bulletsandbones.com/GB/GBFAQ.html#openinprotools
    there is a loud and constant hum from the speakers.
    Could be a ground loop problem. Test it using the MacBook on battery power only.

  • How to Import Custom Views and JSPs to ALBPM Enterprise

    Hi,
    I am using ALBPM 5.7. I have developed a custom view in Studio. When I publish and Deploy the Project in ALBPM Enterprise (WebLogic 9.2), I check true the Import Custom JSPs and Views (or similar terminology). But when I login to the portal after installing the EAR, the view is not listed in my work pane.
    Also, in one of the Interactive Activity I am calling a JSP, which gives a Null Pointer Exception when execute the instance, In my opinion, the Custom JSP is not deployed.
    I have also copied the JSP file in location \bea\ALPBM5.7\j2eewl\webapps\portal\customjsp\
    Please suggest as how do I deploy the View and JSP
    Thank you,
    Regards
    Jayant
    Edited by jayantbit at 06/19/2008 8:01 AM
    Edited by jayantbit at 06/19/2008 8:21 AM

    Hi Mohamed,
    Please check below link.
    What is Drag and Relate in SAP Business One - YouTube
    https://help.sap.com/saphelp_sbo882/helpdata/en/45/100314cf465d7ae10000000a11466f/content.htm
    https://help.sap.com/saphelp_sbo882/helpdata/en/45/10ff71cf465d7be10000000a11466f/content.htm
    SAP - SAP Business One: Your Solution for Generating Custom Reports
    Hope this helps
    Regards::::
    Atul Chakraborty

  • How to import Sony XDCAM EX1  .mxf

    Hi,
    I downloded some .mxf files, and cn't figure how to import them in FC Studio 2.
    How can i see them in FC Studio 2 ?
    thanks

    Hi Antoine,
    No idea how to do it in practical terms but I am sure you will find some good material on Creative COW:
    PMW-EX1 First Impressions Part 2.

  • TS3850 how to import a video from a tape recorder the brand is Canon XL1 mini DV into Final Cut or iMovie?

    how to imort a video from a tape recorder the brand is canon XL1. i use firewire 6ping befort but the new Mac have not 6ping, they have 9ping

    This is what you need:
    http://rocketfish-prod-live.teletech.com/products/computer-accessories/RF-AP309. html

  • HT201302 How to importing personal photos and videos from iOS devices to my computer with Windows 8?

    myHow to importing personal photos and videos from iOS devices to  computer with Windows 8?
    Nothing indicating iPhone 4s folder for images and videos in Win 8 anymore after plugged in USB cable to PC with the iPhone 4s. Nothing pop up anymore asking if I want to backup photos  / videos to my PC (used to pop up in Win 7).
    Where can I find this folder in iPhone 4s?
    Thks!!

    You can do it via your computer's iTunes. If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
    To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
    If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

  • How to import the Issues list from an Excel File in Project Server 2013

    Hi,
    I'm using Project Server 2013.
    A Project Manager has been playing with the Issues List, deleting some fields, creating new columns and modifying some columns name. The result of this is that I'm getting this error everytime the task
    Reporting (Project Sync) is executed:
    General
    Reporting Wss list sync failed:
    ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='4feafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
    ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='5deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
    ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='69eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
    ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='75eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
    ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='81eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
    ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='8deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
    Reporting message processor failed:
    ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='5beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
    ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
    ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='67eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
    ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
    ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='73eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
    ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
    ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='7feafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
    ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
    ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='8beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
    ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
    ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='97eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
    ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
    Queue:
    GeneralQueueJobFailed (26000) - ReportingWSSSync.WSSSyncMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='98eafda7-f147-e411-940d-005056957f05' JobUID='9e937da7-f147-e411-940e-005056957f0d' ComputerName='b579360a-53ab-4fe0-bf9b-c62f5e8d3529'
    GroupType='ReportingWSSSync' MessageType='WSSSyncMessageEx' MessageId='1' Stage='' CorrelationUID='0945bd9c-0d6a-a0f1-47b0-68cdfcfbff9a'. For more details, check the ULS logs on machine
    b579360a-53ab-4fe0-bf9b-c62f5e8d3529 for entries with JobUID
    9e937da7-f147-e411-940e-005056957f0d
    What I'm trying to do is to create a new Project from the scratch, update the Issues List, not deleting or modifying columns, just creating new columns in order to match the names he (the Project Manager) put in his Issues List, then Export the list to Excel,
    and then create a datasheet view matching the Exported list, but here I don't know how to import the list (copy / paste or whatsoever it can be done...)
    Do you know how to do it, or do you know another/any method to solve this problem?
    Thank you in advance,
    José Espases

    Hi José,
    2 considerations: 
    The first one is that (as you experienced) one should not delete or rename any of the predefined columns in the risk/issue list. What you did is the right way, meaning keeping the native column as is and creating new ones based on the business needs. Finally
    you just need to create view with the appropriate fields.
    Then for importing risks from an Excel list, I can't test it right now, but you should have a datagrid view (MS Access type) allowing you pasting data from Excel.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • How do I add text and edit my PDF file?

    how do i add text and edit my pdf file

    Hi pilothorse,
    To edit a PDF file you need to use Acrobat. If you don't have Acrobat, you can try it for free for 30 days. See www.adobe.com/products/acrobat.html for more information.

Maybe you are looking for