How to import the existing project in the CVS to the weblogic workshop??

Hi,
I have a project in the CVS and I want to work with that project in the weblogic8.1 workshop.
Can anyone help me in importing the existing CVS project/application into the weblogic workshop so that I can check-in, check-out and debug the application.
Thanks in advance
Raj B.

Hi,
    If you want to rename Development Component (DC) project, here is the procedure..
How to rename local Development Component Projects in Netweaver Developer Studio
Regards,
Uday.

Similar Messages

  • How to import an existing project into another existing project?

    RH10
    I will need to bring in all the contents of a smaller WebHelp project into a larger WebHelp project.
    I have found some discussion of merging, but I think this is a different matter (unless I am mistaken). I want to permanently incorporate the content of the smaller project into the larger project.
    What is the best method for doing this please?
    Mike

    Hello again
    Sure, you can import the topics as a "batch" by selecting many topics at once.
    As for the links, I'm thinking that as long as you maintain the relative locations between the linked topics, that all should be fine.
    What I mean by the relative locations is to say that if you have a folder structure in the source project, you will need to ensure you have the identical folder structure in the destination. Then ensure the topics are copied to the exact folders.
    Cheers... Rick

  • How to import an existing project into DTR

    I have one question for NWDI:
    There are two senarios:
    A. I created a web dynpro project without NWDI. Now I want to import it into DTR. Is there any workaround?
    B. My NWDI crashed and can not be recovered. Then I install a new empty NWDI. Since I checked out all the DCs to my client side. Is there any workaround to re-import the project into the empty NWDI?

    Hi,
    You can transfer local DC project into NWDI. I have a doc which tells the procedure to Convert local CAF DC project into NWDI. For Web Dynpro project the procedure will be same. So you can go through the doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3e479a6a-0b01-0010-62bd-dcfe09c67c41
    Without NWDI you can also do your development by usind DCs in your local plugin folder. Here is one doc also.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f7be53bb-0b01-0010-1c96-be3cb6799c1b
    I think it will help you to solve your problem.
    Thanks
    Chandan

  • How to rename the existing project in NetWeaver

    Hi All,
    Please let me know the process of how to rename the existing project in NetWeaver.

    Hi,
        If you want to rename Development Component (DC) project, here is the procedure..
    How to rename local Development Component Projects in Netweaver Developer Studio
    Regards,
    Uday.

  • TS3999 how can I stop syncing my outlook calendar with icloud and not loose the existing calandar data in outlook?  the calendar data which downloads to outlook, was also wiped off the gmail calendar after the icloud sync , how can I restore the data to g

    How can I stop syncing my outlook calendar with iCloud and not lose the existing calendar data in outlook?  The calendar data which downloads to Outlook was also wiped off the Gmail calendar after the iCloud sync, how can I restore the data to Gmail?

    same issue, looks like nobody answered you from last JULY....

  • How to import a existing projekt into eclipse

    Hi everybody,
    how do I have to import a existing projekt into eclipse?
    I always have trouble with package-name and things like that.
    regards Mario

    Hi Mario,
    These are the steps you need to follow to import an existing project into eclipse
    Firstly you must extract the project to a directory.
    Steps:
    1. Select the required Perspective.
    2. Choose File - import.
    3.Select Multiple existing projects into workspace & then next
    4.Select browse.
    5.Select the folder containing the projects & then ok.
    6.Select the projects to be imported.
    7. If you want to have the projects displayed in the J2EE explorere, select open projects after import.
    8. choose finish.
    Hope this will help you
    Regards
    Neha

  • Error while importing an existing project into workspace

    hi,
    I am trying to import an existing project into workspace but getting an error 'vfamilychange' doest not have a .project file .But while checking into the folder structure of project vfamilychange' shows the .project file is already there.
    Please do suggest.

    Hi,
    To correctly use the project in a new NWDS. Please use the following method (for Windows XP only):
    1.) Navigate to the projects folder. This will be in the "DC" or "Local Development" folders in your "Documents and Settings" folder.
    2.) Inside the project folder you will find an "_comp" folder.
    3.) Zip this entire folder with WinZIP or WinRAR.
    4.) Finally goto the new PC / Location of export. Unzip this archive into a new Folder.
    5.) Open NWDS. Goto File->Import->Existing Project into Workspace.
    6.) Select your folder (where you extracted the archive).
    Hope that helps.
    Thanks.
    p256960

  • I am looking for assistence how to import an existing website in Dreamweaver CS4

    I need help to import an existing website in Dreamweaver CS4

    Only have one Dreamweaver CS4 installed, trying to get my DW CS4 disk I
    bought installed on computer (done)  I only need to figure out  how to link
    my website to the DW CS4 on my second computer.
    L. Francesca Ferrari, L.Ac., DTCM, DMQ (China)
    Ferrari Center of Chinese Medicine
    222 Forest Avenue
    Pacific Grove, CA 93950
    831.818.3993
    www.francescaferrari.com
    L. Francesca Ferrari, L.Ac., DMQ (China)
    Department Chair Medical Qigong Science
    Five Branches University
    This message, together with any attachments, is intended only for the use of
    the individual or entity to which it is addressed and may contain
    information that is confidential and prohibited from disclosure. If you are
    not the intended recipient, you are hereby notified that any dissemination,
    or copying of this message, or any attachment, is strictly prohibited. If
    you have received this message in error, please notify the original sender
    immediately by telephone or by return e-mail and delete this message, along
    with any attachments, from your computer.
    From: "Nancy O." <[email protected]>
    Reply-To: <[email protected]>
    Date: Sat, 04 Sep 2010 18:34:03 -0600
    To: Francesca Ferrari <[email protected]>
    Subject: i am looking for assistence how to import an existing
    website in Dreamweaver CS4
    >> I do not know where the site files are. They are on my initial Mac laptop
    >> computer, and I use Hostway as my server.
    Do you mean you lost your local copy of your site files from on an old
    computer?
    Log-in to your Remote Server and GET the site files using DW or your favorite
    FTP application (Cute, Filezilla, WS_ftp, etc....)
    >> But I was distinctly told my the call yesterday with Adobe that I must have
    >> CS5 to get my website, www.francescaferrari.com with Dreamweaver on my
    >> second computer.
    Which version of DW did you have before?
    How many installations of DW did you have? You can have up to 2 at a time.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    >

  • The estimated project size is larger than the target media chosen

    I am at a loss for trying to author a project using Adobe Encore.  I first tried to author the project using version CS2.  When attempting to export I received the following message:
    "The estimated project size is larger than the target media chosen.  While this is an estimate, the project may fail to build."
    I have authored hundereds of projects in the past, but have never received that message before.  I first thought that the problem was with the version of Encore I was using, but I received the exact same error when trying to author the project with Encore CS5.
    The project itself has one menu, a motion menu, and one video file.  The video file last 152 minutes, and I was attempting to export that to a dual layer DVD.  I have since tried exporting the file using Adobe Premier CS5.5 using a variety of settings.  I am trying to export it to a DVD-2 file, with the match soure attributes being set to the highest setting.  The setting on the main concept MPEG encoder is set to 5. I have tried exporting the file using both constant and varaible bit rates.
    When I recently exported the file using a contant bit rate of 6.5, I still had 650.4 MB remaining on my Encore project.  I still received the same error about the project size, and so I am thinking that something else is wrong.
    I have even exported the video file as an uncompressed AVI file, and then tried encoding it again using both Adobe Premier CS5.5 and the Adobe Encoder.  I still get the same error message about file size.
    Any help and/or suggestions about how to solve this problem would be greatly appreciated.  Thanks!

    Using the Imgburn product worked! It also helped me figure out what the real problem was...
    As it turns out, some single-layer DVDs had been mixed in with my dual-layer DVDs. I feel very foolish about this.  All of my discs are printable, and so there is no indication written as far as what their capacity is on them.
    Encore can be a bit vague in identifying a problem such as this. For example, I can set the settings to plan for a dual-layer disc, and it will display a graphical status indicator with that capacity in mind. When I saw the original file message error I honestly believed that there was a problem with the encoded file instead of the type of disc itself.
    Imgburn instantly displayed the discrepancy in the type of disc I had loaded and the needed capacity for the type of project that I was trying to create.
    Thanks again for your help!

  • I tried exporting my film, but it wouldn't export. So, then I tried rendering all of the clips. However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline.

    I tried exporting my film, but it wouldn't export. So, then I tried rendering all of the clips. However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?

    What version is FCPX and what version is your OS?
    How are you exporting and with what preset?
    Luckyl1987 wrote:
    However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?
    No idea about that.. Can yu post a sreen shot of the error message?
    Russ

  • How to import from existing lightroom to the cloud

    How do I get my existing LR photos and catalogs into the new LR CC version?
    Thanks for your help!

    If you are importing from a hard drive then you don't need to worry about the right-hand panel in the import dialog. You would locate the folder that you want to import in the left-hand panel. At the top of the import screen you would choose the "Add" option. This will add those images to your catalog without having to move them anywhere. If you want to place copies on a different hard drive then you would choose the Copy option at the top of the import screen. Then the right-hand panel will enable you to specify where you want the copies to be placed.

  • How to work on the same project on two machines at the same time and also exchange progress seamlessly using Adobe Premiere Pro CC 2014?

    We are working on a film project on Adobe Premiere Pro CC 2014. Two editors are working on the same film project (same pproj file ) on two machines. As a result the bin structure and the file structure is exactly the same. We even bought two licenses for the respective machines to make matters simple (at least we thought it would).
    Now when we share a sequence between the two machines, every time we have to import and re-link media. Also each sequence import comes with its own set of files, which are actually already present in the project. Basically the new sequences are looking to re-link the media to the original/ source files only and are completely ignoring the file structure present in the project.
    In all editing softwares, timeline/ sequence sharing is a very common practise when working on multiple machines. Why is it so tedious in CC 2014? Every time we share a sequence between the two machines the media gets doubled and tripled in the project. As a result the project file size is increasing perpetually. Already Premiere CC 2014 is extremely laggy and slow, and this stupid bug is making it more difficult for us to finish our work on time.
    Has anybody ever faced this issue? How do we solve it? We are willing to try out any workflow that you can suggest.

    Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
    Mylenium

  • How to import a self signed certificate into Firefox from the windows store properly.

    I am currently trying to get a wcf service that runs on the same machine as the browser that is making the request. Since the connection is between a browser and an application running on the same machine security was orginally not a concern and it seemed fine to leave the request on http. The first issue arrised when Firefox did not allow mixed content calls (The website making the requests uses https). I have the service converted fine to run with Chrome and IE in https, but not for Firefox due to its use of a seperate store.
    For the windows store I created one CA cert which then issues the self signed cert which is then binded to a port I have the WCF service listening on (In my case this is: https://localhost:8502).
    This all needs to be done progammatically so I can't manually Add an Exception (which does work).
    If there was a way to use certutil (I am not very addept at using this tool at all) to add this exception it would be very helpful.
    The other method I have tried is exporting the selof signed cert and then importing it. Using IIS I can only export the file as .pfx which I can't seem to import into the Servers tab in the certificates interface (I assume this is the right location for it since the exception adds it here). I extracted the certificate from the port through code and imported it to the store, but it does not seem have the extra column defining the port like the exception cert does (It does not work wither).
    How do I do this correctly? Or is it even possible to have a self signed cert bypass all this? I only have it using self signed certs since the service is just running on localhost.

    HI,
    Adding an exception does work manually, but you would like to do this programmatically. This has more on the nSS functions [https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Certificate_Download_Specification]
    I have not tried this you can add it to the file cert8.db if you can insert it into each profile you can access? (For example copy the file after you have manually added it?) that would overwrite any uniqueness however- not good for preserving data.
    The best advice would come from the security mailing list or the esr mailing list, that helps enterprise environments.

  • How to import photos from Mail to iPhoto and preserve the date created?

    I have several photos sent to me via email attachments in Mail which I want to "add to iphoto."  When I do this, the original date of the photo changes to "today's date." 
    When I drag the photo to the desk top, the file (photo) properties change and the date changes to "today's date."
    Is there a way to import photos and preserve the original date the photo was taken?  For example,  if my family finally got around to sending me photos from 4th of July, I know the date is 7/4/2012, not today's date, 10/9/2012. 
    I want to avoid the time/work of doing batch changes on countless photos I want to add to iphoto. 
    iphoto 11
    mail 5.3
    Lion 10.7.5

    Larry, I need more information...
    Using what you said, I ran some tests using photos taken with my digital camera in iPhoto.  My photos show the following information in the "information" sidebar:
    •type of camera
    •Flash on
    •Format size
    •File size (MB)
    •File type (jpeg)
    •Frame "number"
    •Month/day/year/hour/min/sec/AM-PM
    Then I tried to email a photo to myself:  I have tried:  "share," "attach," "drag/drop" a photo into email and sent it to myself as a test.  Once the photo arrives in my Mail inbox, I have tried various ways to add this "test" photo into iPhoto:
    "Add to iphoto"
    "drag into iphoto"
    "export into iphoto"
    Each time, iphoto created the photo with "today's date."  In the past, I would get an alert:  Photo already exists in iphoto, do you still want to import?  Duplicate or Cancel
    Can you elaborate on, "if the photo properties are present and correctly formatted then iPhoto uses them."
    When I drag a photo to the desktop and double-click to preview the photo, the top of the preview window says:
    P1009.jpg -- locked (gray lettering of the word "locked")
    Is there a setting I need to change to "unlock" the properties of my photos?*
    Thanks!!
    MG
    *My original post focuses on importing photos sent from other people.  I am hoping if I can solve the matter with my own photos, other photos will import with original dates created, too.

  • How to import a web service into labview and make the assembly strong named signed?

    I have used the web services tool to import my .net project files. I am then putting them into clearcase. In order for my dll's to work on a network im getting the error that they need to strong named signed. Is there anyway of strong name signing them with in the web services tool, or modifying the dll's after they've been created? Thanks for any help!

    dbell0971,
    I appreciate your willilngness to help on this issue.  However, it doesn't seem like we are on the same page here.
    When you import a webservice it creates an assembly.  That assembly is .NET.  In general you cannot run an assembly on a shared drive unless it is "trusted".  You can make the assembly trusted by adding some classes and properties to it (i.e. strong signing it)- http://msdn.microsoft.com/en-us/library/xc31ft41.a​spx
    However, since WE are not creating the assembly, LabVIEW is, then we don't have the source code so we can't just strong sign it. 
    The question is simple- Can the Import Web Service Utility strong sign the assembly it creates?
    Thanks,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

Maybe you are looking for