How to import the transport file in BW

Hi all
I have to import transport file that BO has asked during installation of intigration kit, How do I import them in BW and R/3 System.
Regards
Ashutosh D

look at the answer : [Installing transport files to SAP for Crystal|Installing transport files to SAP for Crystal]

Similar Messages

How to import the transports from the SAP Integration Kit into SAP system

Hi expert,
I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
"Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
Copy the needed files on your sap-system in the correct folders:
- usr\sap\trans\cofiles
- usr\sap\trans\data
Use the transaction STMS.
Also take care of the sequence of importing. See the manual for details."
Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
Please advice.
thank you

Hi Rajesh,
check this : logon failed. you do not have the necessary rights to design reports
@Sri

How to import the xml file into bcc?

My input file to atg is xml which contain category or products assets.
I want the scheduler to run in such a way that it should auto create a project and send an email to client for approval.
When the client approves the xml file,then run the scheduler to input the xml file datas into bcc.
i will be using : SingletonSchedulableService for this
Give me a guidance for the same.
Thanks in advance.

I want to implement this in bcc.
Which listener will listen for the approval of the client for the email (which contains the xml to import)we sent to him?
You would have to do custom development to hook your custom workflow with the inbound email. For sending email notifications the action is already there and while creating its element in ACC you can specify a JSP for the email template. You may refer following relevant documentation:
Oracle ATG Web Commerce - Workflows
Oracle ATG Web Commerce - Workflow Action Elements
I recommend to refer the existing DeploymentEmailer source in <ATG>\Publishing\samples\Java and see different DeploymentEvent types and states can be used based on your requirement in your custom component. Also refer these API javadocs to know about the available deployment events and process:
DeploymentEvent (ATG Java API)
DeploymentServer (ATG Java API)
ATG does have a /atg/dynamo/service/POP3Service component to retrieve mails from a POP3 e-mail server but it is primarily used for detecting the bounced email. Not too sure if it would help or fit in your case but still you can go through about its details to know what is already there:
Oracle ATG Web Commerce - Bounced E-mail
You may also refer to the InboundEmail event and API javadocs for InboundEmailMessage which are used in this bounced email detection feature:
Oracle ATG Web Commerce - InboundEmail Event
InboundEmailMessage (ATG Java API)
Now based on all this, if you extend and customize a lot of things it would be bit complex and tedious to detect the inbound approval mail based on its content and then advance your workflow. Another approach can be to put a URL in the mail template of your notification email which the approver would have to click and on the landing page you can authenticate and advance your custom workflow as required.

How to import a XML file into the document?

Hai,
i had created a table using xml file....
Now i want to import that xml file tabel into the document...
Can any one tell me how to import the xml file into the document?
thanks
senthil

Hai...
this is senthil...
i'm beginner for creating adobe indesign plugins..
i want to import a html file in the document...
i want to create a table by using html tags and
that table will be imported into the document..
How shall i do it?
can any one plzz explain me?

How to import the .exp/XPDL/XSDL file into ALBPM Studio 5.7

Hi,
Can somebody tell how to import the .exp file that are developed in ALBPM Studio 6.0/Oracle BPM 10g r3 into ALBPM 5.7. I have tried but can not able to import the project as the file suported by ALBPM 5.7 is <.fpr.exp>. I have also tried to import the XPDL/XSDL file developed in 6.0 to 5.7 but can not able to do so. It is importing the file but the only the automatic activities are showing in workspace (All the other activities like Interactive, Grab etc are not displayed). The code inside that automatic activities are also not there.
How to import the file/files in ALBPM 5.7
Regards,
Bibhu

Hi Bibhu,
I expect importing a project to an older version of BPM isn't going to work or be supported.
Most products are built to be backwards compatabile, not forwards compatible.
I recommend you go to one version of the product anyway - trying to maintain two adds to your maintenance and support overheads.
In which case migrating your processes from 5.7 to 6.0 (or even 10g) would be supportable and the best way to go.
Rgrds,
Ian
.

How to import the data in a .xls or .xlsx file into a oracle database table

Hi,
Please tell me how to import the data in a .xls or .xlsx file into a oracle database table in Oracle 10gR2 using Oracle Warehouse Builder 10gR2.

....can we do something through Non-Oracle->ODBC?Yes, it is possible, look at this thread
[SQLServer access from AIX Warehouse builder|http://forums.oracle.com/forums/thread.jspa?messageID=2502982]
If your server (with target DB and OWB runtime) is on Windows OS this configuration will be simpler - you can use single server.
And additional link on OWB blog (with 11g transparent gateway)
[http://blogs.oracle.com/warehousebuilder/2008/01/11g_heterogeneous_agent.html]
(configuring nonoracle connection with 10g generic connectivity very similar to 11g gateway)
Also look at
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4406709207206#18830681837358
Regards,
Oleg

I exported an archive of iCal from a computer running the last OS X. On a new computer running OS X (10.7.4), I tried to import the .icbu file and got a message "The calendar failed to restore". How do I fix this/get my calendar?

I exported an archive of iCal from a computer running the last OS X. On a new computer running OS X (10.7.4), I tried to import the .icbu file and got a message "The calendar failed to restore". How do I fix this/get my calendar?

I exported an archive of iCal from a computer running the last OS X. On a new computer running OS X (10.7.4), I tried to import the .icbu file and got a message "The calendar failed to restore". How do I fix this/get my calendar?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How to import an .csv file into the database?

and can we code the program in JSP to import the.csv file into the database.

It is better to use Java class to read the CSV file and store the contents in the database.
You can use JSP to upload the CSV file to the server if you want, but don't use it to perform database operations.
JSPs are good for displaying information on the front-end, and for displaying HTML forms, there are other technologies more suitable for the middle layer, back end and the database layer.
So break you application into
1) Front end - JSPs to display input html forms and to display data retrieved from the database.
2) Middle layer - Servlets and JavaBeans to interact with JSPs. The code that reads the CSV file to parse it's contents should be a Java Class in the middle layer. It makes use of Java File I/O
3) Database layer - Connects to the database using JDBC (Java Database Connectivity), and then writes to the database with SQL insert statements.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Keeping the above concepts in mind, first build a simple JSP and get it to work,
then research on Google , for Java File I/O , discover how to read a file,
Then search on how to readh a CSV file using Java.
After researching you should be able to read the CSV file line by line and store each line inside a Collection.
Then research on Google, on how to write to the database using JDBC
Write a simple program that inserts something to a dummy table in the database.
Then, read the data stored in the Collection, and write insert statements for each records in the collection.

How to import jar & exp file into the eclipse 3.1 + jcop

hi, I am new to the javacard technology.
I have implementing applet by using eclipse 3.1 + jcop plugin.
recentlly, i got jar and exp file from someone. and I have to import given two files in the my applet.
Q1. but i don't know how to use(import) two files into the elipse.
and...
I have tried to put the export file structure in the build path, but I am still getting the same error:
Q2. "resolving constant-pool of clazz cash/ccash; failed: no such clazz cash/ccash;", what means?
anyone help me~plz!
many thanks..
lsh.
Message was edited by:
neonoble

1) In the Package explorer right-click the project you want to import the jar files into.
2) Click import
3) Select Archive file in the Import dialog box and click next
4) Browse to the jar file and select it
Socx

I can't import the .MOV file .how to i use it??

i can't import the .MOV file .how to i use it??

You might need to tell us a bit more about your problem. Do you mean you can't import a video file into Premiere, or your computer is having trouble playing Quicktime files?

How to import the Issues list from an Excel File in Project Server 2013

Hi,
I'm using Project Server 2013.
A Project Manager has been playing with the Issues List, deleting some fields, creating new columns and modifying some columns name. The result of this is that I'm getting this error everytime the task
Reporting (Project Sync) is executed:
General
Reporting Wss list sync failed:
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='4feafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='5deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='69eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='75eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='81eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='8deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
Reporting message processor failed:
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='5beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='67eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='73eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='7feafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='8beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='97eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingWSSSync.WSSSyncMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='98eafda7-f147-e411-940d-005056957f05' JobUID='9e937da7-f147-e411-940e-005056957f0d' ComputerName='b579360a-53ab-4fe0-bf9b-c62f5e8d3529'
GroupType='ReportingWSSSync' MessageType='WSSSyncMessageEx' MessageId='1' Stage='' CorrelationUID='0945bd9c-0d6a-a0f1-47b0-68cdfcfbff9a'. For more details, check the ULS logs on machine
b579360a-53ab-4fe0-bf9b-c62f5e8d3529 for entries with JobUID
9e937da7-f147-e411-940e-005056957f0d
What I'm trying to do is to create a new Project from the scratch, update the Issues List, not deleting or modifying columns, just creating new columns in order to match the names he (the Project Manager) put in his Issues List, then Export the list to Excel,
and then create a datasheet view matching the Exported list, but here I don't know how to import the list (copy / paste or whatsoever it can be done...)
Do you know how to do it, or do you know another/any method to solve this problem?
Thank you in advance,
José Espases

Hi José,
2 considerations:
The first one is that (as you experienced) one should not delete or rename any of the predefined columns in the risk/issue list. What you did is the right way, meaning keeping the native column as is and creating new ones based on the business needs. Finally
you just need to create view with the appropriate fields.
Then for importing risks from an Excel list, I can't test it right now, but you should have a datagrid view (MS Access type) allowing you pasting data from Excel.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How to code the IMG_INSTANCE_DATA file?

In GSM11.11, we can use icon in Proactive Command. But I don't know how to code it. I can find Image Coding Schemes in GSM11.11, Annex G.
The related files are EF_4F20 and EF_4FXX under DF_5F50.
Can anybody help me to code EF_4FXX?
Thanks
Jensen.Peng

Simply copy the source cofile and datafile from the source system to the target system and then import.
Data file is located at /usr/sap/trans/<sid>/data with format R<transport_number>.<sid> and cofile is located at /usr/sap/trans/<sid>/cofile with format K<transport_number>.<sid>
Copy them to the same location on the target system and then go to STMS -> Extras -> Add -> insert the name of the transport in format <sid>K<transport_number>, this will add the transport to the import queue then just simply import the transport.
Regards
Juan

HOW TO IMPORT A TRANSPORT REQUEST AT OS LEVEL IN HP-UNIX PLATFORM?

HOW TO IMPORT A TRANSPORT REQUEST AT OS LEVEL IN HP-UNIX PLATFORM?

Dear Pavan,
When you exporting the transport request via TCODE Se01/SE09/SE10 two files are created at the OS level in Data and Cofiles folder residing in E:\usr\sap\trans.If you open these files you will see your exported request number You need to copy your reqest from the development server OS and then go to the Quality /Production OS and open the same folder E:\usr\sap\trans and paste it into the respective Datafiles and Cofiles folder.
If will surely work.
PS: I recommend not to do this way.Use tcode STMS for importing
Note: Users must be kept away from the application and database server.Hence they work on presentation server which is our GUI workstation.
Reward if hepful and your query is resolved.
Regards,
Ashutosh

How to import the Sync BO's

Hi ,
I had taken the backup of some sync BOs from the SAP system. Now I want to import them to the server.
Can anyone help me with how to import the syncBOs?
Thanks & Regards
Neha Mahanty

You can migrate SyncBOs between systems using either text files or transport objects. To migrate a SyncBO using a text file use the Download to File and Upload from File options. To migrate a SyncBO using the SAP transport technology use the Export and Import options.
Procedure
Migrating a SyncBO from a System
       1.      Start transaction merep_mig.
       2.      Select Download to File or Export for the transport action.
Select transport action Export for the migration of objects as a transport file. Select transport action Download to File for the migration of objects to a text file.
       3.      Enter the SyncBO ID in the section Selections for SyncBO ID.
       4.      Select the Mapping option in the SyncBO Definition Objects section.
You can select SyncBO Exit Source in the SyncBO Definition Objects section if custom code is added to the SyncBO(s).
Also select SyncBO configurations to download the additional configuration parameters defined in the profile dialog (see Defining Additional Configuration Parameters for SyncBOs).
You can also deselect Overwriting Allowed at Import or Upload if you want to avoid the SyncBO to be overwritten in the target system.
       5.      To define further selection criteria, choose Advanced Selection.
       6.      Choose Execute. Alternatively, you can choose Simulate for a test run.
       7.      Assign the RFC destinations.
When you import the SyncBO definition, a similar dialog box appears in which you can enter or change the RFC destinations.
       8.      Choose Continue.
       9.      Enter the name of a download file.
   10.      Choose Save to perform the download.
Transport objects or a text file are generated for transport to another SAP Web AS.
Migrating a SyncBO to a System
       1.      Start transaction merep_mig.
       2.      Select Upload from File or Import for the transport action.
Select transport action Import for the migration of objects as a transport file. Select transport action Upload from File for the migration of objects to a text file.
       3.      Choose Execute. Alternatively, you can choose Simulate if you want to display the files to be uploaded.
       4.      Enter the name of an upload or transport file.
       5.      Choose Open to perform the import.
       6.      Confirm or change the RFC destinations.
The RFC destinations should be defined in transaction SM59
i hope this will be usefull answer to you
please reward me points if its a usefull answer........dont forgetaaaaa

How to import the transport file in BW

Similar Messages

Maybe you are looking for