How To Import Title in CS4

There used to be a folder created with all the tiltles for a particular project. Now with CS4 I'm not seeing this folder. I want to import a few titles from another project how do I do this. Thanks.

Jennifer,
No, it will not be linked to the previous Project. However, it WILL be linked to each instance of it in the new Project. Use it 8 times, and then edit it and all 8 will reflect that change. If this is not what you want, just load the Title into the Titler and do a new Title "Based On" that original Title.
For use in other Projects later on, the best course for me is to Save the Title as a Template, so that it will always be available to me. I have several sub-folders in my Library for Titles. Some are by Project, some by type and some just in the "Hunt Titles" sub-folder.
Good luck,
Hunt

Similar Messages

I am looking for assistence how to import an existing website in Dreamweaver CS4

I need help to import an existing website in Dreamweaver CS4

Only have one Dreamweaver CS4 installed, trying to get my DW CS4 disk I
bought installed on computer (done) I only need to figure out how to link
my website to the DW CS4 on my second computer.
L. Francesca Ferrari, L.Ac., DTCM, DMQ (China)
Ferrari Center of Chinese Medicine
222 Forest Avenue
Pacific Grove, CA 93950
831.818.3993
www.francescaferrari.com
L. Francesca Ferrari, L.Ac., DMQ (China)
Department Chair Medical Qigong Science
Five Branches University
This message, together with any attachments, is intended only for the use of
the individual or entity to which it is addressed and may contain
information that is confidential and prohibited from disclosure. If you are
not the intended recipient, you are hereby notified that any dissemination,
or copying of this message, or any attachment, is strictly prohibited. If
you have received this message in error, please notify the original sender
immediately by telephone or by return e-mail and delete this message, along
with any attachments, from your computer.
From: "Nancy O." <[email protected]>
Reply-To: <[email protected]>
Date: Sat, 04 Sep 2010 18:34:03 -0600
To: Francesca Ferrari <[email protected]>
Subject: i am looking for assistence how to import an existing
website in Dreamweaver CS4
>> I do not know where the site files are. They are on my initial Mac laptop
>> computer, and I use Hostway as my server.
Do you mean you lost your local copy of your site files from on an old
computer?
Log-in to your Remote Server and GET the site files using DW or your favorite
FTP application (Cute, Filezilla, WS_ftp, etc....)
>> But I was distinctly told my the call yesterday with Adobe that I must have
>> CS5 to get my website, www.francescaferrari.com with Dreamweaver on my
>> second computer.
Which version of DW did you have before?
How many installations of DW did you have? You can have up to 2 at a time.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
>

I ripped all my CD's to a NAS (.wav). How to import those to iTunes while changing to AAC without loosing references (CD-Title)

I ripped all my CD's to a NAS (.wav). How to import those to iTunes while changing to AAC without loosing references (CD-Title)

You could try my script ConvertFormat and see if you like the results. Would be easier than inserting the CDs and correcting the tag info again. Just be aware this is a one-way trip. Once you've thrown away some quality to shrink the files you can't get it back without going back to the source. You may better off investing in a bigger drive.
If you just want to squeeze more on the iPod you can use the built-in iTunes option to convert files to a lower bitrate as they are added to the device.
tt2

How to put Titles in iPhoto slideshows

I truly love the slideshows I create in iPhoto with music...
"BUT", I'd also like to add a brief comment before, during or after the slideshow, and I've found this impossible to do.
Is Apple waiting for the new upgrade to address this problem?...
I've gone into my wordprocessor "Appleworks, and text-edit", hoping I could then export/import the titles into iPhoto, but to no avail...
I enjoy creating slideshows with music, then burning them, then playing them on stereo sound television, and its a total blast for me when I view my creations.
So, Apple, or readers on this site, please help a poor old man towards the path of enlightenment, for life can truly be beautiful with "titles"...
Thanks to all...
QuickSilver G4 933 Mac OS X (10.4.8)

Terence,
Don't know if you misunderstood my problem, but today, I found the solution to putting titles into iPhoto slideshows, and its pretty simple also.
I don't know how to enter a link here in order to include the directions on how to create titles in iPhoto..
But, briefly, create the title in any wordprocessor.
Take a screen shot.
Drag it into an iPhoto icon
Then, drag the icon into the iPhoto library.
Sal Pedi
Salvatore
We have no idea what enhancements - if any - are
planned for iPhoto. What you want to do cannnot be
done with iPhoto unless you use a third part editor
to create images with the comments, and import the
images into iPhoto and then incorporate them into
your slideshow. There are other apps that can caption
and use comments. Check out PhotoToMovie from
http://www.lqgraphics.com.
Regards
TD

How to import DivX files???

How to import DivX files??? File format not supported... Adobe Premiere Pro CS4.

I am with you, as I get handed all sorts of "stuff." I have a normal workflow, with about anything but DV-AVI (I only do SD for now), and that is do a batch conversion with DigitalMedia Converter. I have also found that some other NLE's are more lenient, regarding odd CODEC's. I have used PrElements, CyberLink PowerDirector (does DivX pretty well, with the CODEC installed) and Magix MovieProducer Pro.
Still, PrPro is my NLE of choice by a great stretch, and I just use the others as tools to get the media in the proper form. I have been amazed at the spectrum of formats/CODEC's that people come up with, but also by how well (when you factor out those heavily compressed deliver-only format/CODEC's and the quality loss) I can convert, and then edit some of this stuff.
It's just the way that it goes. It's like the client, who comes in with a DVD, created in some DVR unit, and wants it edited and shipped off on another DVD. Quality loss with 2x MPEG-2 Transcodes, and the first VOB is going to also have cr*p Menus and navigation, that I have to rip around. Still, the job gets done.
With the Moyea FLV Importer for Premiere, I can even edit that junk, when they pull something off of YouTube (only if the © issues can be handled).
Good luck, and sorry for the bad news. PrPro is very sensitive to the CODEC's that it will edit with. Others, well not so much, but who would want to edit with them?
Hunt
[Edit] PS - I have never been able to Export to Xvid, though I can Export to DivX just fine. Xvid hangs PrPro, and PrE too.
Message was edited by: Bill Hunt - Added [Edit]

How to import logo to the clip and display it during the whole clip

Hello All,
I am using Adobe Premiere Pro CS4.
I am doing a project now from various DVDs I've already made from a while ago.
Now I will use these them in a commercial things so I want to add a logo to the clips to keep my rights ...etc.
Here is the situation:-
1) Importing the clip file into Adobe Premiere Pro CS4.
2) Importing the logo image file I want to use.
3) Right click the clip file and choose insert.
Now I want to know how to import the image file to the clip so it is being there during the whole clip?
I've tried several times to import it but found it displayed seperatey after or before the clip or in the middle while I want to be displayed during the whole movie.
Also it is big when I displayed while I want to resize it to be in the top right of the clip.
Thanks a lot
Sorry for poor English.

took longer than I thought...and this is only basic examples...can be finessed better....
with more thought and time ...but this gives you the basic ideas..read bout track mattes and transparency..etc...
samples
white background ...with track matte
becomes transparent..letters, black opaque, gray transluscent
transparent background
letters black and white are shown as is with no track matte
transparent background with track matte...
now white letters act as mask and allow image through only white letters

How to import Bridge Labels into Lightroom 3.4

I have close to 500,000 images all neatly labeled in Bridge. They have the color labels for: (red) select, (yellow)second, review, to do (the basic standard adobe created labels) nothing customized.
After importing my entire collection into lightroom (27 hours) nothing at all remained of these labels. Making this thing entirely useless.
I cannot imagine why two adobe products would not share defaults like this or am I missing something obvious?
Does anyone know how to import the labels from Bridge into lightroom? (keep in mind that I know nothing of lightroom so make it baby steps)
thanks

You also wrote:
"Even the stars from Bridge do not register in Lightroom..."
Yes, they do.
Allow me to do a bit of explanation how LR works, here:
Bridge and LR work differently, and it is important to understand this difference.
Bridge works as a file browser. Whatever you put into a folder / or a drive Bridge will "see" it (as long as it is image-related).
For instance if you do a name change for an image file or a folder in your OS, Bridge has no trouble "seeing" the changed file or folder.
LR doesn't work as a file browser. LR creates and works with a database called Catalog. LR does not "see" an image-file unless it is imported. Importing means adding it to the Catalog. You can have any number of images on a drive / in a folder that LR does not "see" as long as they are not imported into LR.
That means, - in the case of a change of file name and/or folder name that you do outside of LR (for instance in Bridge), - that LR cannot "see" this folder / image file. LR still has this image / folder in the Catalog under its old name and when it looks for it, it can't find it because the name has changed. LR then flags this file / folder as "missing". "Missing" in this sense doesn't mean that the folder / the image is not on the drive; "missing" means that LR cannot find it.
LR can also create, work with and read xmp-files, also called sidecar files. XMP-files are small files that contain mnetadata, such as the camera settings, the date & time, the title, caption, etc - but also develop / edit metadata. When you use the Camera Raw feature in Bridge and edit the image, Bridge writes the data into the xmp-file. Also, things like color labels and ratings stars are written into the xmp-file.
To bring these into LR you have to make LR read the xmp-file. You do this in the Library Module by going to >Metadata > Read Metadata from File.
But be careful here. When LR reads the data from file that means also that whatever you did in LR (and did not save to xmp), will be overwritten when there is a conflict. So for instance, if you did image editing in Bridge, and late you did image editing in LR (on the same image) and you then select "Read Metadata from File", your LR-edits will be supplanted by the Bridge-edits.
To resolve this you have to make LR your only image editor. Also it is advisable to save your LR edits to xmp. You do this via Ctrl / Cmd. + letter "S" or > Metadata > Save Metadata to file. If you do this Bridge will be able read and display your LR-edits.
WW

How to import cd into existing playlist?

In the new (12.0.1) iTunes, how can I import the contents of a CD into an existing playlist? It appears I have to import the contents into my general library, then drag the imported titles into an existing playlist. Two steps, where before there was just one.

In the previous version of iTunes, the CD contents could be dragged directly into an existing playlist folder and imported that way. One step. Of course, it was added to your full library, but you could import it to a target folder. That shortcut has been eliminated, it appears.

How to import from iPad to Mac

How to import GarageBand files-from my iPad to my Mac book?

Are your GarageBand versions on your iPad and Mac compatible? Check this list:
GarageBand for iOS and Mac: Project compatibility
If the versions are compatible, you can share the projects on your iPad to iTunes or share them to iCloud to transfer them, see this help text:
For GarageBand 2.0:
Use iCloud with GarageBand
Share GarageBand songs
Send a GarageBand song to iTunes
Tap My Songs, then tap Select.
Tap the song you want to send, then tap the Action button .
Tap Share Song via iTunes.
Do one of the following:
To send the song as a GarageBand song, tap GarageBand.
To send the song as an audio file, tap iTunes, then tap Share.
After you tap the iTunes icon, you can choose the quality of the file GarageBand sends to iTunes. You can also add artist, composer, and title information that appears in iTunes.
Sync your iPad with your computer.In iTunes, the exported song appears in the Documents list in the File Sharing area when GarageBand is selected.
Do one of the following:
Drag the song from the GarageBand Documents list to the Finder.
Click Save As, navigate to the location where you want to save the song, then click Save.
You can open the GarageBand song in GarageBand on your Mac, or play the audio file in iTunes (or any compatible audio application) on your computer. GarageBand songs cannot be opened on a Windows computer.
Regards
Léonie

How to import external table, which exist in export dump file.

My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character".
The original definition of the extenal table is as given below
CREATE TABLE EXT_TABLE_EV02_PRICEMARTDATA
EGORDERNUMBER VARCHAR2(255 BYTE),
EGINVOICENUMBER VARCHAR2(255 BYTE),
EGLINEITEMNUMBER VARCHAR2(255 BYTE),
EGUID VARCHAR2(255 BYTE),
EGBRAND VARCHAR2(255 BYTE),
EGPRODUCTLINE VARCHAR2(255 BYTE),
EGPRODUCTGROUP VARCHAR2(255 BYTE),
EGPRODUCTSUBGROUP VARCHAR2(255 BYTE),
EGMARKETCLASS VARCHAR2(255 BYTE),
EGSKU VARCHAR2(255 BYTE),
EGDISCOUNTGROUP VARCHAR2(255 BYTE),
EGREGION VARCHAR2(255 BYTE),
EGAREA VARCHAR2(255 BYTE),
EGSALESREP VARCHAR2(255 BYTE),
EGDISTRIBUTORCODE VARCHAR2(255 BYTE),
EGDISTRIBUTOR VARCHAR2(255 BYTE),
EGECMTIER VARCHAR2(255 BYTE),
EGECM VARCHAR2(255 BYTE),
EGSOLATIER VARCHAR2(255 BYTE),
EGSOLA VARCHAR2(255 BYTE),
EGTRANSACTIONTYPE VARCHAR2(255 BYTE),
EGQUOTENUMBER VARCHAR2(255 BYTE),
EGACCOUNTTYPE VARCHAR2(255 BYTE),
EGFINANCIALENTITY VARCHAR2(255 BYTE),
C25 VARCHAR2(255 BYTE),
EGFINANCIALENTITYCODE VARCHAR2(255 BYTE),
C27 VARCHAR2(255 BYTE),
EGBUYINGGROUP VARCHAR2(255 BYTE),
QTY NUMBER,
EGTRXDATE DATE,
EGLISTPRICE NUMBER,
EGUOM NUMBER,
EGUNITLISTPRICE NUMBER,
EGMULTIPLIER NUMBER,
EGUNITDISCOUNT NUMBER,
EGCUSTOMERNETPRICE NUMBER,
EGFREIGHTOUTBOUNDCHARGES NUMBER,
EGMINIMUMORDERCHARGES NUMBER,
EGRESTOCKINGCHARGES NUMBER,
EGINVOICEPRICE NUMBER,
EGCOMMISSIONS NUMBER,
EGCASHDISCOUNTS NUMBER,
EGBUYINGGROUPREBATES NUMBER,
EGINCENTIVEREBATES NUMBER,
EGRETURNS NUMBER,
EGOTHERCREDITS NUMBER,
EGCOOP NUMBER,
EGPOCKETPRICE NUMBER,
EGFREIGHTCOSTS NUMBER,
EGJOURNALBILLINGCOSTS NUMBER,
EGMINIMUMORDERCOSTS NUMBER,
EGORDERENTRYCOSTS NUMBER,
EGRESTOCKINGCOSTSWAREHOUSE NUMBER,
EGRETURNSCOSTADMIN NUMBER,
EGMATERIALCOSTS NUMBER,
EGLABORCOSTS NUMBER,
EGOVERHEADCOSTS NUMBER,
EGPRICEADMINISTRATIONCOSTS NUMBER,
EGSHORTPAYMENTCOSTS NUMBER,
EGTERMCOSTS NUMBER,
EGPOCKETMARGIN NUMBER,
EGPOCKETMARGINGP NUMBER,
EGWEIGHTEDAVEMULTIPLIER NUMBER
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EV02_PRICEMARTDATA_CSV_CON
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
While importing , when i seen the log file , it is failing the create the external table. Getting the error "ORA-00911: invalid character".
Can some one suggest how to import external tables
Addressing this issue will be highly appriciated.
Naveen

Hi Srinath,
When i observed the create table syntax of external table from import dump log file, it show few lines as below. I could not understand these special characters. And create table definationis failing with special character viz ORA-00911: invalid character
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv').
I even observed the create table DDL from TOAD. It is same as i mentioned earlier
Naveen

How to import mailboxes from Time Machine to new Mac

I had Time Machine backing up our old G5. We got a Mac Pro back in November and I never was able to import the mail from the G5 to the Mac Pro so I left it alone and just kept using mail on the old G5. Well, the G5 took a dump last monday. I currently have the Time Machine backup for that computer connected to our Mac Pro (but not using it as backup yet). So, the mail from the G5 should be on the Time Machine backup right? If so, can I import it into Mail on the Mac Pro?
I also pulled one of the hard drives from the G5 and have it in the Mac Pro in the 2nd bay just to make sure that HD wasn't dead. It works fine and I tried importing the .mbox files from that drive but it appears that all the mail on that particular drive are from like 2006. So, again, I need to find out how to import mail from the Time Machine drive. Any thoughts?
10.7.4
Mail 5.2

Back up what data? Mail data? I don't have any yet. I haven't used Apple Mail on this Mac Pro yet.
Edit: Launching Mail and holding Option right afterwards does nothing. Holding down option and then launching Mail does nothing.
Oooooh.... launching time machine while holding down option......
Edit again.... I don't have a Time Machine menu because that disk is not currently set up as time machine for the Mac Pro yet. I don't want to use it as a backup for this computer yet. I just want to be able to pull some of the backed up contents from it until I'm set.

How to Import an Order via Order Import with multiple shipment lines?

Good Morning,
I have a question concerning Oracle's order import functionality. We are importing orders from an outside system and need to consolidate orders by customer id. So if the same customer places 2 orders for different items on the outside system, they should interface to Oracle as a single order to that customer with a shipment line for each ordered item (ex 1.1, 2.1..).
I know this can be done, but do not know how to implement the solution.
Can someone please help?
Thank you!!
Edited by: user11984882 on Jun 22, 2011 7:03 AM

Hi,
I guess that this zip-file contains a transport. This transportfiles have to be copied in the /usr/trans/data und /usr/trans/cofiles and imported by the transaction STMS.
Thomas Jung wrote how to do this in this: How to import examples from book "Advanced BSP Programming"
Perhaps your basis administrator can help you to do this?
Regards,
Stefan

How to import or sync Exchange server data like Calendar, Contacts with a web application or web service

How to import or sync Exchange data like Calendar, Contacts with a web application or web service.
1. Is there any API to import contacts and calendar (tasks and events) from exchange server to my calendar in web application using web services or http request. the user would have provided the username and password for his exchange account.
2. Is there any licensing involved to communicate with exchange server for its data.
thanks in advance

I am bit lost here; i have my exchange credentials, how (or) can i use the above mentioned solution for windows application or web services. can you please point in the right direction. my requirement is this: how to sync exchange data with a third party
app or webapp(my development) using EWS. how to start with, starting point and steps to do[just overview ;)].

How to Import 3.0 application in APEX 3.2?

How to Import 3.0 application in APEX 3.2? These two are on two different machines. It is not upgrade.
Pls help.

Hello,
APEX supports backward compatibility. It means that 3.2 version can run any application that was developed in earlier versions.
In your case, just export the full application from 3.0 and import it in the 3.2
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?
I have PremierePro-CS5 installed.
This stereo 3D camcorder (Sony HDR-TD10E), output an .MVC (MultiViewCoding) file, coded in H.264 format.
This format is already compatible with Bluray3D stereoscopic format.
1) But, how to edit the .MVC in Premiere?
2) What plugin should I use (if exists) for PremiereProCS5?
3) Cineform Neo3D, can manage the .MVC format? Can convert it to Cineform format file, for import it into Premiere?
4) What software should I use to convert an .MVC video to an AVCHD H.264 file, and import it into PremierePro CS5 or CS5.5 for editing?
Thanks!
Horsepower0171.

Sorry, I am Italian, it is very difficult for me to understand what he says!
I can just read the english text, or follow the actions of a videotutorial!
Thus my question is the same:
-What software can do that?
-Sony Vegas 10 do the Bluray3D authoring?
-For MVC editing, should I wait for Adobe CS6? Or is it planned an update for CS5.5?

How To Import Title in CS4

Similar Messages

Maybe you are looking for