How to import user and group at EPM11.1.2?

I found a similar topic on this at User & Groups Issue
But sounds like there is big change a tEPM11.1.2, I didn't find CSSImportExport utility at all.
Could anyone tell me how to import users and groups from flat file at this version?
Thanks
Tony

You can only use LCM from 11.1.2, it is not really that different format from the CSSImportExport utility.
I find the best way is to set up a few users and provisioning and then use LCM to export, then you get a good feel to the format of the file.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

How to create users and groups using WLST Offline with Weblogic 8.1.4

How to create users and groups using WLST Offline with Weblogic 8.1.4?
Any ideas?

Hi this is how i created a user using WLST Offline?
cd('/Security/' + domainName)
# Delete the default user name weblogic
# incase you want to remove the defualt user weblogic
delete('weblogic','User')
# Creating a new user defined
create(userName, 'User')
# Setting the password of the user you created.
cd ('/Security/' + domainName + '/User/' + userName)
cmo.setPassword(password)
Regards
Makenzo

How to find users and group in sun box

Please adivce How to find users and group in sunsolaris
Thanks in advance

We can get all the group details from /etc/group file .
Similarly user details can be found in /etc/passwd .

Importing user and group database from 2.6 to 4.0

Hi,
I need to import the user and groups from version 2.6 ACS to version 4.0. The 2.6 online documentation talks of using the CSUtils to create a .txt back up of the users and group. But I cannot see how to import that into 4.0. Has anyone done this. Any info would be appreciated,
cheers,

Hi Darran,
I looked at what I had imported using the instructions you had supplied me and it looked fine, all users and group, tacacs privelege levels had been imported. I modified a router on our network to point at the ACS 4.0. on testing it looks like the passwords hadn't been copied across successfully. Logins are failing with 'invalid CS password' in the failed authentication log. If I changed the password manually it was fine.
Have you seen that before?
Thanks for your help on this.
Rgds,
Russell.

How to reset users and groups in Server.app?

Recently after change settings in the Server.app (like turn off/on open directory, delete/add certificates), I got a strange problem:
In the users and groups list, it display all local users and groups (looks like system users and groups, about 100 users and groups, but this is a new server)
I tried reset the server.app by following
howto reinstall/reinitialize os x server
http://support.apple.com/kb/HT200271?viewlocale=en_US
These users and groups still showing there.
Have you seen this before and how can I completely reset the server.app to factory default so that I can start over the set up?

In theory, that should restore the users. You can do some surgery if you are really brave. But the reinstall generally should be enough.
These accounts are in the DSLocal data store. Basically, this is very similar to the any OS X machine. Apple keeps a default copy of the Local Database here:
/System/Library/DirectoryServices/DefaultLocalDB/Default
Should you need to reset a machine to the default local database, you can remove the current database (/var/db/dslocal/nodes/Default) and then copy the default one to the same location. I would not go this far unless the reinstall was unsuccessful.
To check, you can run this command:
dscl . list /Users
That will list all the Users in the local DB. To get a count, pipe to wc
dscl . list /Users | wc -l
On a Server that I just jumped on, I see 79 users and 111 groups (dscl . list /Groups | wc -l) But this is a system will man SACL groups so I likely have more than the default.
Hope this continues to help. Probably more info that you want.
Reid
Apple Consultants Network
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

Import user and group from dump.txt to ACS Solution Engine 3.3

I have export the user and group using the CSUtil -d on my acs v2.6. But ACS Solution Engine 3.3 does not have the CSUtil command to import the user and group database. Can anyone advise me?

I'm trying to do the same thing with no luck so far.
Documentation seems to indicate you can do this using RDBMS Synchronization but we haven't got it to work yet.
I read the doco as saying you create a csv and place it on an FTP server and ACS will read from that file. When we've tried, it rights its own file with a different extension and says it can't find the one we place in that same directory.

Can't import users and group backup

I exported the list of user names and groups prior re-installing 10.6 server.
Now when I try to import the backup, I get the error:
"The following users could not be imported because each of their first short names contains an invalid character (such as a period.)"
followed by the list of my users.
According to Apple's user creation documentation, the following characters are allowed:
"For the first short user name, use only these characters. Subsequent short names can contain any Roman character.
* a through z
* A through Z
* 0 through 9
* _ (underscore)
* - (hyphen)
. (period)"
Is that a bug? is there a way around it ?
Thanks

I am also encountering the same problem. Can anyone assist?? I had to demote my OD due to a DNS change and lost 200+ accounts unless we can find a solution.
Thanks for anyones suggestions.

How to change default /Users and /Groups to different Volume?

Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.

1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

How to create a new user and group on command line?

Hi,
I am trying to install INN, the news server on OS X.4.8 (non-server), but it requires me to create a user and group, both called 'news'.
I know this has something to do with using Netinfo to create them, but I am logged in remotely via ssh and I can't use Netinfo Manager.
How do I create new users and groups via the command line.
Thanks for any help.
PowerMac G5 2x2.7GHz Mac OS X (10.4.8)

I've put some shell scripts that do this here,
and descriptions
add_user
addgroup

LDAP User and Group import

My client has OAM as SSO provider. They want the LDAP Agent to import only users and groups but not the group memberships.
What setting should I Use for LDAP authentication ?

I have below changes in files
1] In jps-config.xml
-- Added identity store and selected it from drop down in Security Context tab.
2] In weblogic-application.xml
In Security tab --> Role assignment mapped valid-users to principle name.
<security>
<realm-name>myrealm</realm-name>
<security-role-assignment>
<role-name>valid-users</role-name>
<principal-name>DERDev</principal-name>
</security-role-assignment>
</security>
3] Same thing done in weblogic.xml . I do not know the difference between weblogic-application.xml and weblogic.xml configuartion and which will work.
4] Added security role "DERDev" along with the default/automatically added role "valid users"
<security-role>
<role-name>DERDev</role-name>
</security-role>
Still no luck ...... i am missing again ? I referred many links but found not a single document mentioning all steps
Mukesh

How to prevent user or group to use 3-tier WebI and DeskI in XI 3.1

How to prevent user or group to use 3-tier WebI and DeskI in XI 3.1
This function is enable in BOE 6.5 by using Supervisor.

Hi,
You can explicitly deny access to these applications from the CMC in BOE 3.1. Open the CMC, click on BusinessObjects Enterprise Application and then select the WebI.
From the right hand side click on the 'Net Access' section for that group and disable the 'Log on to Web-Intelligence and view this object in CMC.'
This will prevent the option of the WebI for that group.
I hope this helps you.
Regards,
Prashant

Upgraded to 3.1 and lost all users and groups. How do we get them back?

We ran the update to Server 3.1 (from 3.0) on our Mavericks Mac-Mini Server.
Everything had been fine before the update, but now all users and groups have completely disappeared.
The only user we have is the main administrator log-in.
Since we verified that all of our data, wikis, and other items are still in place, it might be easier to just re-create the groups and users (and permission therein).
But, we cannot log into Workgroup Manager, nor can we add users/groups in the Server app (because it is "grayed-out").
Can somebody please provide a suggestion??
We are a small engineering firm with only 5 users, so it's not like this would take all day.
Thanks, Mike

Have you tried
sudo sso_util configure -r REALM_NAME -a diradmin afp
(cf. Lion Server: AFP users unable to authenticate with Kerberos after upgrading)in Apple Support ?
p.

How do we fetch the top-level users and groups for a particular resource

Hi Experts,
I need to fetch the top level users and groups (permissions) for a particular resource, Currently i am able to fetch the effective users list.
Thanks.

To elaborate...
Here we need the users and groups who have direct access to the resource. We dont want to resolve groups.
Please help us with the apis to use in our java code to fetch the users and groups.

How to create windows users and groups from Java

Hi,
Can any one please tell me, which Package/API will helps to create windows users and groups from Java.
Thanks,
M.Prem.

You can't do it with pure Java, and it's not in the core API. You'd have to write a native function to do it, using whatever API Windows provides, and then call it with JNI. Or look for a third party native-based Java library that already does that.

Assigning Roles to Users and Groups

Hi,
We have installed EP 5.0 SP4...with Content Management...we configured the LDAP to Portal......all the users are maintained through LDAP only...the problem is assigning the Role's to user..here in portal how to assign the roles to the users...we are not getting the Role assignment option under Portal Admin TAB..is there any way to configure the roles to User's are Group's.....
it is an urgent assignment for me..help can be appreciated...
sudhir

Sudhir,
You can assign the roles to users and groups as below.
1. Select the System Administration in the top level navigtion
2. Select user administration
3. You can search for a specific user or a group from this iView.
4. Use the edit button to edit the profie of the user or group.
5. Search for the role in the search iView.
6. Add the role to the user of group and save.

How to import user and group at EPM11.1.2?

Similar Messages

Maybe you are looking for