How to import video to ipad using camera connection kit

how to import video from my camera to ipad using camera connection kit? only my still photos seem to import.

I have a Kodak Zi8 and none of my videos came across during my sync as well? Haven't taken the time to check formats yet but looking for way to bring them over? Do I have to move to iMovie somehow?
Message was edited by: NDZNO1

Similar Messages

  • Importing photos to my ipad 2 on iOS 4.3.2 using camera connection kit causes photo app to crash

    Importing photos to my ipad 2 on iOS 4.3.2 using camera connection kit causes photo app to crash. Tried importing photo from an iPhone 4/ Panasonic DMC-FX50 via USB and SD card but without success. However, importing video from a Flip Mino HD is ok. Can't seem to figure out what I'm doing wrong

    Have you tried a reset by holding the power and home buttons for ten seconds until the apple appears?
    Since it's multiple different import devices not working with the CCK, it appears to be on the iPad side...
    If the reset doesn't help, try a restore from within iTunes on the computer.

  • The new Ipad and camera connection kit with Sony A65 RAW

    Hi,
    I recently purchased the "new ipad" with camera connection kit. I'm shooting photos in RAW format with Sony A65 and I have succesfully transferred them into my Ipad. The problem is that none of the applications such as Snapseed, Photoforge2, etc. will display the full 24 megapixel image from the RAW file and will instead show small preview.
    It is indicated in support pages of these applications that there should be support for IOS Raw engine supported RAW files with full size. Can someone indicate me what RAW formats are supported by IOS 5.1 and whether support for Sony RAW files will be added.
    The same problem persists with 16 megapixel images from Sony A55.
    Thank you in advance.

    Thank you, David, but actually your answer is not helpful. As I explained in my opening message, I am interested in buying and using an i-Pad while on a trip in Spain, where I will not have access to a computer, other than, perhaps, one at the Apple Store where I might buy the i-Pad.

  • How do I use camera connection kit to transfer photos from iphone 4 with ios 7 to ipad 2 with ios t?

    How do I use the camera connection kit to transfer photos from iPhone 4 with ios 7.0.2 to iPad 2 with ios 7.0.2?

    <http://support.apple.com/kb/HT4101>
    "In addition to supporting digital cameras and SD cards, you can import photos and videos from your iPhone, iPod touch, iPad, and iPod nano (5th generation) using the Camera Connector."

  • Transferring videos from Sony cybershot camera to iPad with Camera Connection kit

    My USB CAMERA CONNECTION KIT works when I transfer photos from my sony cybershot camera, but when I try to open he videos I get an "cannot read" error. Any ideas?

    Your Sony Cybershot video format is probably not supported. See list attached.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/c1ca11e3a84fac3829 b738f8b80103e2_zpscad24d4f.jpg

  • Unable to use camera connection kit

    I downloaded IOS5 to my ipad2 and lost my pictures when I try to redownload them using my ipad camera connection kit it tells me it doesn't recogize the device any suggestions?

    Which part of the kit are you using, the cable to camera connection or the SD card reader ? If the SD reader then how are the photos getting onto the card, direct from the camera or from your computer ? If you are adding them to the card then you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them

  • CF card to Ipad with camera connection kit?

    I have a cannon 5d and 5d mark ii, and was really hoping to transfer images to my iPad from these cameras via the camera connection kit as they both use CF cards and not SD cards. But these cameras do not work with the USB camera connector. So I thought maybe I could use a card reader and the USB connector. But my card reader seems to use to much power. Does anyone know of a CF card reader that works with the connection kit or any other method that may help me??. Thanks

    I have a Canon 20-D and I intend on getting an upgrade Canon (not the 50-D but the one step up from that, ... the one with video capability). Anyways, I bought the Apple camera connector kit and it is the BEST...! I, too, had an initial problem with not being able to use the connector kit until I remembered that I have this "Hama" USB2.0 Card Rreader )35 in 1 (this is what I am reading that is on top of this dark blue item that is the intermediary between the camera connector kit doohicki and my computer (or ipod, or iPad). It works like a charm.
    The best thing of all is that this USB camera connector kit is NOT just for pics but can be used for lots of things that are USB connectable. In the newest issue of MacLife they discuss the multiple uses of this camera connector kit. One can even use it for a (USB) key board. One thing that i like about Apple's c.c kit is that the photos that you take can be put directly onto your ipod or ipad or iphone WITHOUT first downloading onto a computer ( & then transferring them).

  • Importing many (400+) photos with camera connection kit fails

    Hi,
    I'd like to hear if anyone came across this already:
    When I try to import a lot of images ( most recent example is 445) photos from my Canon 5D through the camera connection kit + USB cable it fails.
    The app starts up just fine and starts to read from the camera, icons appear (showing RAW+JPG yet no preview) but after a while the import window simply closes and no pictures have been imported.
    Smaller numbers of pictures work just fine.
    I had hoped for 4.2.1 to address this but no luck.
    This limits the usability of the iPad as a viewing and backup device for my pictures quite a bit for me.
    Any ideas?
    Thanks,
    Andi

    Update:
    It turned out that the cable was the problem. I had used a retractable cable which worked find for the preview but was obviously not up to the job when it came to the higher requirements of the full speed image download.
    Using a standard USB cable works just fine.

  • HT4101 Lost all Photos while Using Camera Connection Kit to Nikon D70 -HELP!

    After using with my Nikon D70, the photos are not on my camera - says now incompatible file format.  And they cannot be seen on iPad. on iPad there is a gray box that says 'jpeg' in it.  Where are my photos?  Can I get them back?

    You can't export any type of files using the camera connection kit.
    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
     Cheers, Tom

  • Import pictures to iPhone with Camera Connection Kit?

    At the moment it seems that this kit is only working with iPad.
    It would be great to import pictures directly to iPhone from sd card with the Camera Connection Kit when travelling. Especially with the new iPhoto this makes sense. Is there a solution to get it working or is it planned to support it with a new iOS?

    It still doesn't work with iPhone. I doubt it will either.

  • How to get ipad3 to read files on a flashdrive using camera connection kit

    How can I get my flashdrive to read &amp; download files using apple ipad camera connection kit

    Hi sorry I meant photo and video files The strange thing is that on my ipad one I used to be able to plug the flash into the USB CCKit &amp; voila
    But now I get error popups saying requires too much power??????
    I have 6 flashdrives &amp; I bought 2 new Sandisk8gb&amp; the other 16gb I have formatted the derives to fat 32 using disc utility &amp; put a DCIM folder inside with photos &amp; videos in the DCIMfolder which is exactly what I did for my 1st ipad  BUTAll I get is popups saying about too much power ???
    Can anyone help me out as to why this is happening &amp; how I can fix  this annoying problem
    Thanks in advance. 

  • How to import picture to iPad from USB connection

    Hello there
    It is very hard for me to import a picture from SD card thought USB connection or upload a picture to  my web.
    What is going on iPad ?

    The iPad doesn't support input from SD cards except via the Camera Connector Kit. Is that what you're using?

  • Anyone heard whether Apple will decide to allow iPhone to use camera connection kit?

    I love being able to view/share photos from my camera via my iPad.  Sometimes, however, you want to share from a camera where you don't want to carry the iPad.
    Please, Apple, allow this connection kit to work with iPhone.

    iCloud kind of solves this problem, but not really.
    You're also not talking to Apple here. I would post the feedback link but I won't bother.

  • Cameras which support direct import to imovie (ipad2) through camera connection kit

    Hi
    I am looking to create a list of consumer (and prosumer) cameras which can directly connect to ipad2 via CCK and the video (& accompanying audio) shot by these cameras directly import in imovie without any conversion etc. for subsequent editing.
    So far I have see some posts mentioning Flip Mino HD being able to do this.
    Would also appreciate if the camera's resolution, rough price and other details are also posted for comparision sake.
    Thanks in advance!

    Panasonic Lumix TZ7 also seems to work as per post by floridadaz. Also saw a youtube video mentioning the same (Cannes Harbor Stroll by dkiechle)

  • Camera connection kit help,

    Hi I am trying to use camera connection kit to import photos using sd card but nothing happening. I can transfer my photos via i tunes as i have tried this but wanted to use the camera kit any help would be appreciated

    Most digital cameras use a standard naming format when they write photos to their memory cards, and the iPad and its camera connection kit only accepts that format i.e. directly off the root off the card should be a directory called DCIM, and underneath that are the photos, whose filenames should be exactly 8 characters long plus their file extension e.g. IMG_0001.JPG
    DCIM
         IMG_0001.JPG
         IMG_0002.JPG
    etc
    (Digital cameras quite often have another directory between the DCIM and the actual photos, but it's just the DCIM one that is important.)
    For direct transfer from your camera, you may need to change a setting on your camera - I know that some Canon DSLRs have a menu setting on them to enable 'PTP' (picture transfer protocol) on them, not sure about other makes.

Maybe you are looking for

  • WCS - Guest User Creation

    Hello. I have a question related to the Lobby Ambassador login in WCS and creating user accounts in an environment using a guest Anchor controller. Specifically, if a 'lobby ambassador' is logged into WCS from 2 timezones away (anchor is in same loca

  • 0actiontype not displaying in the report and cube

    hi gurus,               I have loaded masterdata for 0employee,0person,0position and then loaded the cube 0pa_c01 ,but the thing is im not getting the value for actiontype and action reason either in the cube 0pa_c01(blank) nor in the BEX report(whic

  • File Renaming function

    Is the new renaming function in ML limited to TextEdit and Preview? I am unable to get the function to work in any of the microsoft office apps.

  • Multiple Date columns  in one fact table

    hi , I have a fact which related to multi date, like bid date, win date, lost date ,etc..., I have create dimension like dim_bid_date, dim_win_date, but if I wan to create a report , the value sum by the month (2012.01-2012.08), I don't know how to d

  • Messages and scrollbar

    Hi, In my requirement, Im sending the some table info to the class and receiving the same tables with changes and also messages. Now I'm working on 2sets of tables, one for sending and other for recieiving. I'm invalidating the node and binding the n