How to improve download speed

Is there any Internet Download Managerment Software for Mac OX ? Many thanks,

Is there any Internet Download Managerment Software
for Mac OX ? Many thanks,
There's also iGetter: http://www.igetter.net
You may also want to look on how to optimize your network settings to achieve an overall networking improvement (not just "download speed")
There are 2 utilities that do this for you:
http://www.enigmarelle.com/broadbandoptimizer.py
http://www.pimpmyosx.com
Of course, if you're familiar with unix you can achieve such (and even better) optimizations by writing your own scripts
a few Macs running 9.x, a bunch of Macs running 10.4.x and some serious SGI workstations running Irix 6.5.x
Message was edited by: fu

Similar Messages

How can I improve download speed

How can I improve download speed of movies purchased from iTunes on my AppleTV? 10 hours+ minimum. I've already selected a lower video resolution from the settings in the iTunes store. It used to be way faster. Any suggestions? Thanks.

Check the Internet speed to confirm it is what it is supposed to be by going to www.speedtest.net
On the ATV, try Settings > General > Reset.
Power cycle the router, modem, and the ATV

How to improve the speed for backing up files to time capsule via in hose wifi?

How to improve the speed for backing up files to time capsule via in hose wifi?

via in hose wifi?
Use a bigger hose??
House??
Need to spell this out a bit more..
But speed via 2.4ghz to the TC is restricted by Apple to max 130mbps link speed.. much slower actual transfer.. latest TC and laptops can do 450mbps on 5ghz but you need to be up close.. so place the TC near the device using it.. and force 5ghz connection by using a different name for 5ghz network.

How to improve spreadsheet speed when single-threaded VBA is the bottleneck.

My brother works with massive Excel spreadsheets and needs to speed them up. Gigabytes in size and often with a million rows and many sheets within the workbook. He's already refined the sheets to take advantage of Excel's multi-thread recalculation and
seen significant improvements, but he's hit a stumbling block. He uses extensive VBA code to aid clarity, but the VB engine is single-threaded, and these relatively simple functions can be called millions of times. Some functions are trivial (e.g. conversion
functions) and just for clarity and easily unwound (at the expense of clarity), some could be unwound but that would make the spreadsheets much more complex, and others could not be unwound.
He's aware of http://www.analystcave.com/excel-vba-multithreading-tool/ and similar tools but they don't help as the granularity is insufficiently fine.
So what can he do? A search shows requests for multi-threaded VBA going back over a decade.
qts

Hi,
>> The VB engine is single-threaded, and these relatively simple functions can be called millions of times.
The Office Object Model is
Single-Threaded Apartments, if the performance bottleneck is the Excel Object Model operation, the multiple-thread will not improve the performance significantly.
>> How to improve spreadsheet speed when single-threaded VBA is the bottleneck.
The performance optimization should be based on the business. Since I’m not familiar with your business, so I can only give you some general suggestions from the technical perspective. According to your description, the size of the spreadsheet had reached
Gigabytes and data volume is about 1 million rows. If so, I will suggest you storing the data to SQL Server and then use the analysis tools (e.g. Power Pivot).
Create a memory-efficient Data Model using Excel 2013
and the Power Pivot add-in
As
ryguy72 suggested, you can also leverage some other third party data processing tool
according to your business requirement.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Improve Download Speed with Mobile Wireless Card

I just purchased a GT MAX 3.6 Express LaptopConnect Card from AT&T to allow mobile internet access. While I can connect to the internet, the speed is very slow (I'm getting 3 of 7 bars). I understand there might be a Mac "booster" I can purchase. Has anyone heard of such a thing? Or, do you know how I can improve my download speeds with a wireless card? Thanks kindly for your help on this...

I received M Q today. To my surprise, there is no way to connect M Q to PB or any computer. I called Verizon and talked with their data connect department. They confirmed that M Q cannot be used as a modem The only device that will is Treo 700p. I am returning the unit by FedEx today. Treo is xpensive. So I will downgrade from MBP to PB G4 15" and use Verizon's Broadband Wireless PCMCIA card

How to limit download speed in Adobe Scout using Flash CC

Hello, since bandwidth profiler is no longer available in Flash CC (???) I've read in the help that I should use Adobe Scout for that but I can't find explanations of how am I to do it. I want to limit the download speed and thest how the .swf behaves. Can you help me please? Thank you.

If you have Flash CC you also have Flash Pro CS6 in your CC membership. You can always use the old bandwidth simulator there.
Otherwise I fear it's going to come down to controls outside the Adobe realm. Either use software like NetBalancer (free version available) to limit bandwidth to a process. Other techniques like throttling a whole ethernet card or limiting bandwidth from a router perspective, etc.
You will need to attach to a process with the mentioned software so you sort of need a stub loader that waits to load your actual content until you're ready so you have time to point the software at the correct process. A PITA but possible.
You can always request it:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How to increase download speed on osx mountain lion imac

My internet connection is 4mbps wired broadband.previously I downloaded at the speed of 300 to 415 kbps.now it reduced to 50 to 60 kbps.how to increase the download speed on my imac.

This isn't a function of your Mac; it's either your ISP or your router that is causing slow performance.
Make certain that you really are using a wired - only connection. Turn off AirPort to be sure.
Try resetting your router. If that doesn't fix things complain to your ISP. They will want you to connect a computer directly to your modem and run whatever speed testing software they use. Their responsibility ends with the equipment they provide.

How to control download speed

Currently firefox downloads files at 220 kbps. I want to cap the download speed to 100kbps. Please help.

Hey I am quite novice related to computers.. Could anyone please tell me the exact procedure of how I can limit the download speed. I saw the solution posted to my question but I was unable to execute what was asked. Can someone tell step by step procedure. I am sure this will help a lot of people like me.

How to increase download speeds

I am averaging a download speed of around 560 kbps how do i increase it?

that depends on your internet connection/plan.

How to improve upload speeds with new Airport Extreme?

Hi!
Just plugged in a new Airport Extreme to replace a BT HomeHub 3.0. The wi-fi download speeds have generally increased over a wider range in the house but the wi-fi upload speeds have dropped to under 1Mbps.
Speeds to laptop linked via ethernet appear fine (both up & download).
Initially thought that I may have messed-up the set-up but the fact that the wired connection works fine makes me think this is something to do with the Airport settings - a scary thought as I don't really know much about this stuff.
As range was really the reason for getting the AP Extreme I'm contemplating plugging the HomeHub back in and just trying to use the AP to extend the old HHub system rather than setting up a new AP system...
Any suggestions would be most gratefully received!
Thanks

... just a quick note to say that the appears to be resolved after a long telephone call to apple service dept (very patient - very helpful).
In my naivety I had attempted to revert back to using the homehub (3.0) router and connecting the APExtreme into one of the Ethernet LAN ports but this didn't work! So called the apple helpline & we went back to basics until it worked. One point to note that may help anyone finding themselves in a similar position...
I had followed the instruction to reset the APEBS depressing the button first whilst powered then without power and during the unit being reconnected to power supply thinking tha this would do a full restore to factory defaults (effectively undoing all the messing- around I may have done flounderinng through the settings) but it was only when I was directed to do a full reset through the Airport Utility settings [Edit\Advanced\Restore Defaults] that this worked (for me).
Download and upload speeds are now up to 93% of advertised speeds wired, & wireless with some fluctuations which appear to be network delivery related rather than anything to do with the APEBS. It's working well with an APExpress which had been struggling (intermittentlyout of range) which is connected to stereo and Apple TV.
By the way - thanks to other posts regarding importance of not connecting an audio out cable to phono sockets on the stereo (horrible sound quality) using a redundant CD channel it works great.
All-in-all, very happy with it so far.

How to increase download speed

had trouble connecting to internet through my Blue ray player. Sony had me go to www.speedtest.net to run a test. I was getting 2.20mbps for the dowload and 8.02mbps for the upload. He questioned why this so low for the download and so high for the upload. Sony asked to contact Verizon to see how to change these numbers. Any thoughts?

First Question: Is this a wired or wireless connection?
Second Question: What speed package are you provisioned for?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

How to improve connection speed?

I recently converted to AT&T Uverse, and it's at a 6 rate speed. But my connection acts awfully slow.
I don't have a full memory; I seem to be using only 40% of my hard drive memory!
Any notion of why it's slow here? Suggestions for things to check into?
BEST!

Connection speed is dictated by your ISP, I would STRONGLY recommend contacting AT&T and letting them know what your poblem is. How much RAM and HD space on your computer has absolutely no bearing on the Internet connection speed.
Good luck.

How to improve the speed of creating multiple strings from a char[]?

Hi,
I have a char[] and I want to create multiple Strings from the contents of this char[] at various offsets and of various lengths, without having to reallocate memory (my char[] is several tens of megabytes large). And the following function (from java/lang/String.java) would be perfect apart from the fact that it was designed so that only package-private classes may benefit from the speed improvements it offers:
    // Package private constructor which shares value array for speed.
    String(int offset, int count, char value[]) {
     this.value = value;
     this.offset = offset;
     this.count = count;
    }My first thought was to override the String class. But java.lang.String is final, so no good there. Plus it was a really bad idea to start with.
My second thought was to make a java.lang.FastString which would then be package private, and could access the string's constructor, create a new string and then return it (thought I was real clever here) but no, apparently you cannot create a class within the package java.lang. Some sort of security issue.
I am just wondering first if there is an easy way of forcing the compiler to obey me, or forcing it to allow me to access a package private constructer from outside the package. Either that, or some sort of security overrider, somehow.

My laptop can create and garbage collect 10,000,000 Strings per second from char[] "hello world". That creates about 200 MB of strings per second (char = 2B). Test program below.
A char[] "tens of megabytes large" shouldn't take too large a fraction of a second to convert to a bunch of Strings. Except, say, if the computer is memory-starved and swapping to disk. What kind of times do you get? Is it at all possible that there is something else slowing things down?
using (literally) millions of charAt()'s would be
suicide (code-wise) for me and my program."java -server" gives me 600,000,000 charAt()'s per second (actually more, but I put in some addition to prevent Hotspot from optimizing everything away). Test program below. A million calls would be 1.7 milliseconds. Using char[n] instead of charAt(n) is faster by a factor of less than 2. Are you sure millions of charAt()'s is a huge problem?
public class t1
    public static void main(String args[])
     char hello[] = "hello world".toCharArray();
     for (int n = 0; n < 10; n++) {
         long start = System.currentTimeMillis();
         for (int m = 0; m < 1000 * 1000; m++) {
          String s1 = new String(hello);
          String s2 = new String(hello);
          String s3 = new String(hello);
          String s4 = new String(hello);
          String s5 = new String(hello);
         long end = System.currentTimeMillis();
         System.out.println("time " + (end - start) + " ms");
public class t2
    static int global;
    public static void main(String args[])
     String hello = "hello world";
     for (int n = 0; n < 10; n++) {
         long start = System.currentTimeMillis();
         for (int m = 0; m < 10 * 1000 * 1000; m++) {
          global +=
              hello.charAt(0) + hello.charAt(1) + hello.charAt(2) +
              hello.charAt(3) + hello.charAt(4) + hello.charAt(5) +
              hello.charAt(6) + hello.charAt(7) + hello.charAt(8) +
              hello.charAt(9);
          global +=
              hello.charAt(0) + hello.charAt(1) + hello.charAt(2) +
              hello.charAt(3) + hello.charAt(4) + hello.charAt(5) +
              hello.charAt(6) + hello.charAt(7) + hello.charAt(8) +
              hello.charAt(9);
         long end = System.currentTimeMillis();
         System.out.println("time " + (end - start) + " ms");
}

I have a new ipad with retina display and the orientation change from portrait to landscape is extremely slow? How can I improve the speed?

Any ideas on how to improve the speed ?

Hi rodtheprod,
I apologize, I'm a bit unclear on the issue you are describing. If a movie from the iTunes Store supports multiple languages, they can usually be changed as outlined in the following article:
iTunes: Language settings for video
http://support.apple.com/kb/HT5562
If this is not possible and no changes have been made to the country settings for the iTunes Store, you may want to try redownloading the movie (if it is still available):
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
- Brenden

How to improve speed of data acquisition? Help needed urgently.

I want to convert analog signals to digital signals and simultaneously perform some search on the data acquired and this whole process has to be done continuously for few hours.
So I tried writing two programs in Matlab, one acquires the analog data and converts it to digital and saves the data in small chunks on hard disk (like file1, file2, file3,...) continuously. The other program performs the search operation in those chunks of data continuously. I run both the programs at a time by opening two mat lab windows.
But the problem Iam facing is that the data acquisition is slow. As a result I get an error message in the second program saying that
"??? Error using ==> load
Unable to read file file4.mat: No such file or directory."
Iam unable to synchronize the two programs. I cannot use timers in search program because I cannot add any delays.
Iam using a NI PCI-6036E ,16 Bit Resolution ,200 KS/s Sampling Rate A/D board.
Should I switch to some other series such as M series having sampling rate of the order MS/s?
Can anyone please tell me how to improve the speed of data acquisition?
Thanks.

Gayathri wrote:
I want to convert analog signals to digital signals and simultaneously perform some search on the data acquired and this whole process has to be done continuously for few hours.
So I tried writing two programs in Matlab, one acquires the analog data and converts it to digital and saves the data in small chunks on hard disk (like file1, file2, file3,...) continuously. The other program performs the search operation in those chunks of data continuously. I run both the programs at a time by opening two mat lab windows.
But the problem Iam facing is that the data acquisition is slow. As a result I get an error message in the second program saying that
"??? Error using ==> load
Unable to read file file4.mat: No such file or directory."
Iam unable to synchronize the two programs. I cannot use timers in search program because I cannot add any delays.
Iam using a NI PCI-6036E ,16 Bit Resolution ,200 KS/s Sampling Rate A/D board.
Should I switch to some other series such as M series having sampling rate of the order MS/s?
Can anyone please tell me how to improve the speed of data acquisition?
Thanks.
Hi gayathri,
well my email is [email protected]
if ur from india mail me back.
Regards
labview boy

How to improve download speed

Similar Messages

Maybe you are looking for