How to improve nokia messaging
Dear Nokia developers,
the new Nokia email messaging service has become quite stable over time. Good work here.
I have some ideas how to improve the client, perhaps you can put this on your roadmap:
1. Combined view of all mailboxes, so I don't have to jump between the mailboxes to read all new mails.
2. If 1. is not possible: When the client receives a new mail an you open the client, it always jumps to the primary mail box. Could you make it to jump into that mailbox, that holds the new(est) mail or at least to the mailbox overview page?
3. Mark all messages as read. When I'm in the office I read the mails on my primary mail client. At the end of the day, I want to quickly mark all new messages as read. Up to now, I have to go to every single mailbox, mark all items and then have to choose mark as read from a sub menu.
4. More keyboard short cuts. You have these beautiful devices like the E71 and E72 with a full querty keyboard, why don't you make use of it more often? Give us more shortcuts to everyday functions like mark all, mark as read, next message and so on (there are a few shortcuts right now, but not enough).
5. Faster and cleaner GUI. I still wonder why you don't believe in your own gui guidelines. Why does the application needs its own background and graphics, why do the icons zoom in and out (slow!). Depending on the global background image on the home screen, the application does not match any colour and looks quite wrong. Other push mail providers like emoze managed to use normal message boxes for incoming mails which fits much better into the system. If that is not possible could you at least use the current theme (colours, background, ...) for your application?
6. Home screen notifications. The Home screen notification lines took too much space from time to time (at least 3 lines plus). Could you give us more configuration options to save a little line space (or could you head over to the E71/E72 group and tell them, that 320x240 px is not that much for the leading business mobile from the biggest mobile manufacturer in the world).
Recap: I want a fast, consistent client with more direct key short cuts, combined view of all mailboxes and more configuration options.
Could you please do that... :-)
I can second these points.The client feels a little bit out of place on the E71, Nokia has a lot of room for usability improvements.
Anybody from Nokia listening?
Similar Messages
-
How to install Nokia Messaging Software (Push and ...
How to install Nokia Messaging Software (Push and Pull email) on SD CARD?
I have got Nokia Push email instaled on NOKIA 6110 Navigator. This instalation take all of my phone internal memory, and mailbox is in phone internal memory too. How to install or move program or mailbox to SD card?I'm surprised that Nokia will spend all that effort to miss out on one little detail - EMAILS WITH ATTACHMENTS TAKES UP A LOT OF SPACE - The least they could do was allow us to point the application storage to the SDHC card.
I love the messaging app, but I just can't afford to give up so much phone memory - So it is not getting installed until we can point storage to the SDHC card. -
How to install Nokia Messaging without SMS Downloa...
Hi all, Im trying to install Nokia Messaging but for some reason I dont get the SMS with download link.
When I try to download from the mobile phone browser and I try to install, I get the "regular" email application and not the new one. The phone is a E63 with SW Version 200.21.012.
Thanks in advance for any help!!Contact your service provider if NM is supported and how much it's going to cost you.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
how to make nokia messaging user name and password?
Moderator's note: The post was moved to the most appropriate board.Does this help?
-
Nokia Messaging cost's after trial period?
Dir all,
At the following question from NOKIA messaging FAQ's :
How much does Nokia Messaging cost?
Nokia Messaging is currently provided on a trial basis. In the future, consumers will be able to acquire Nokia Messaging through an operator plan. You may incur charges in connection with the transfer and receipt of data to your mobile phone and may not be included in your flat data rate plan. Please contact your operator to know how much you will be charged.
I understands the following:
1- there is no charge in the future for using NOKIA messaging that i need to pay to nokia it self
2- and any charges will be added will be between me and my operator (service provider)
3- On this bases, if I'm connected to the internet through WiFi as example at home there will be no charges at all.
I don't know if what i understand is right or not
Please if any one know the exact policy of using NOKIA messaging after the trial period send it to me
Best Regards,
Eng. Khaled RedaOpen http://email.nokia.com
Login with your Nokia Messaging e-mail and password.
At the bottom:
My subscription
Plan: Nokia Messaging trial
Subscription status: Active
Expiration: 1 Jan 2010
Smile is Health. Keep your Smile -
How (and where) can I create a new Nokia Messaging...
Hi,
I just got a new E7 which I am currently pretty happy with, however when I go to email.nokia.com I only see a log-in form for the existing customers. Where can new users register and how can I do it? I can see that there is a Nokia Mail by Yahoo, but cannot find anything useful about push-mail there.
(Added later)I have successfully added a Google mail as a push mail to my phone and it IS WORKING,but I would like to add also our mail server but I cannot (I get a message that the password is wrong however it isn't since I can add the mailbox as POP3). After reading a lot of tutorials I SHOULD be able to log in to email.nokia.com with the first push-mail login credentials (in my case of google mail), however I get an error when trying to do so.
TIA,
Matej
Solved!
Go to Solution.Hi justme123,
Thank you for your post and welcome to the forums!
Nokia Messaging account should be automatically created when you add a new mailbox to your email client. All account management and configuration are handled within the Nokia Messaging clients on the Nokia device. If you want to have Nokia Mail account, please see here.
To set up Hotmail or Gmail in Exchange ActiveSync, perform the following steps:
Go to the Mail application and select New mailbox.
Preparing for setup is displayed.
Select Exchange ActiveSync.
Enter your email address, password, username and domain.
Connecting server is displayed.
Enter the server name when requested.
For Gmail Setup use the following values:
User Name: full email address (for example [email protected])
Domain: google
Mail for Exchange server: m.google.com
Hope this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
How can I remove Nokia Messaging?
How can I remove Nokia Messaging? I don't find it usefull and now I just don't know how to remove it from my phone... And the internet is always on because of it
I have the Nokia 5530 Illuvial
Need some help...If you don't want the application at all, you can go to phone settings, find the installed applications and then remove Nokia Mail (might be Nokia Messaging). After you do that, Software Update will keep presenting it as a downloadable update, but you can ignore it.
Lumia 920, Lumia 800
Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428 -
How do you forward, or move emails in Nokia Messag...
Help!! I cannot seem to find any command for forwaring emails in Nokia Messaging. I find it hard to believe Nokia did not put this utility in their email client.
It is not rocket science. Also, there is no way to move emails from one folder to another. I am looking to move certain emails from the Trash folder back to the Inbox. Even the simple Gmail client has both commands!
We are not asking Nokia to re-invent the wheel, just to copy it!!
Can anyone help??Hi, it's all done by keyboard shortcuts. Go into your mailbox, select options and the help section - you'll find a list of all the shortcuts. 'f' is forward, 'm' is move . . .
-
Exchange (OWA) access with Nokia Messaging
Thank you for enabling corporate mail (Exchange / OWA) is now working under Nokia Messaging.
I summarize a few items that could be improved:
1 In order to install this, you first need to log into the service with an online web account and only then can you install your corporate account. You can later delete the online web account. This is awkward.
2 Within Nokia Messaging I cannot set the email address I wish to show when I send someone an email. I use in my corporate email an alias which is slightly different from the main domain: for example if my corporate email address would be [email protected], then my alias would be [email protected]
3 Within Nokia Messaging I cannot set the reply_to address
4 Within Nokia Messaging I cannot accept calendar invitations.
5 MFE used to work fine with the 3G Portal (WAP based) access point and this saved me from using the 3G/Internet connection (payable). However, Nokia Messaging does not work on the 3G Portal access point and has to be set to 3G/Internet. This means that using Nokia Messaging will cost me more than MFE.
Message Edited by rrrr123456 on 05-Mar-2009 01:01 PMCan you please tell us how did you configure OWA on Nokia messaging, because as from Nokia support team , OWA is not supported in Nokia messaging !
Please advice.
Thanks
Haikal -
Nokia Messaging 1.2.2 has been released!
A new Nokia Messaging release (version 1.2.2) became available on Tuesday, February 16th, 2010. Please go to http://email.nokia.com on your device to download the latest version of the client. Note, if you are using the multiprotocol (built-in) client, no update is needed (E52, E55, E72, E75, 6710, 6730, N86 8MP).
Here are the highlights of this release:
Automatic consolidation of multiple accounts:
Nokia Messaging will automatically consolidate accounts when the user adds an email address that belongs to another Nokia Messaging account. In previous releases, the user would be rejected when adding a new email address to the Nokia Messaging account during setup. Now, the user may continue to setup their account and the new email address will be added to the account being configured.
Password handling simplification:
This release of Nokia Messaging now always aligns the Nokia Messaging password with the Email Service Provider (ESP) password. Users can now simply enter either their Nokia Messaging password or their current ESP password during authentication. If the authentication succeeds and their Nokia Messaging password is different from the ESP password, the account will be updated and the current ESP password will become the Nokia Messaging account password. If users forget the ESP password, they must go to the ESP to retrieve it. As such, the Nokia Messaging web site (email.nokia.com) no longer includes a Forgot Password function.
On-device email retention:
The device now retains 30 days of emails or up to 100 emails (whichever comes first). Also, the Sent Items and Draft folders as well as the subfolders retain 30 days of emails or up to 50 emails (whichever comes first).
Destination feature available on the Nokia S60 5.0 touch devices (X6, N97, N97 mini, 5800, 5530 and 5230):
Nokia Messaging can now automatically switch to WiFi internet access when it is available. Using the device’s Destinations feature, users simply add their favorite WiFi access points to the Internet Destination (or any other Destination that they configure), and Nokia Messaging will automatically switch to it when it is available. Initial setup must still be done with a valid network SIM in the device so that Nokia Messaging can validate the user’s service eligibility. With the new Tools menu item Access point, users can define a different destination to be used or even specify a fixed APN for special cases when a Destination is not appropriate.Dear Nokia people,
I'm new to S60. I bought last week an XM 5800. Wich I'm liking pretty much. However, I think there is room for improvement in email handling. I'm just saying this as a user who knows things could be better.
Here's my case. I want to be able to view my gmail from my cell phone automatically. Wich sounds simple if it can be checked manually whenever I want (making that process automatic). But it isn't.
I've tried two methods:
1) Messaging
This creates an account and everything works great if you do it manually. When I try to set it up to get my mail I can either do one of two things under "Automatic Retrieval":
E-mail notifications, wich I'm assuming uses the IDLE funcionality. I've tried this option with both possibilities, "Auto-update" or "Only in home network". This only works when I have that inbox connected wich is a good idea since it's generating traffic (costly) and using connection (worse battery life). Maybe there could be an option, if a user wanted it, to keep the connection opened even if the program gets closed, wich would make good use of IDLE and not being annoyed by the warning about exiting the app and closing connection.
E-mail retrieval, this function seems to work, for about 1500 messages, then the phone becomes reaaaaaaaaaaaaally slow. This function should have some more options like retrieving only a certain number of mails AND only that certain number. What I'm saying here is that the phone should only handle for instance the last 50 mails and drop the rest, so if I have 50 mails and a new one arrives, the last one doesn't appear anymore (on the server yes, on the phone no). This would make the application run really smoothly and the phone would not freeze.
Even if this idea doesn't get implemented, at least make the option of Number of mails to be retrieved configurable under this mode, wich under this mode is ALL.
2) MfE
With MfE, I'm able to sync my calendar, nice. And, even if on the google sync site it says the don't suppor the email sync, it works with my mail. So I set up MfE to every 15 minutes to get my mail. This is the option I'm using right now because I don't have to be constantly updating my inbox or leave the connection opened.
The catch is that for this method to work, you have to forget about dividing mails into different carpets with filters in Gmail, I had to eliminate the "skip inbox" setting in the filters that worked with the mail I wanted to receive on my XM 5800. But I guess is a good solution until I find another.
So, in conclusion. It would be very nice to be able to set an IMAP account, like gmail to automatically (every certain amount of time) retrieve a certain number of mails and to keep the inbox with that quantity. Or, at least be able to configure how many mails the inbox should retrieve.
I hope this helps. If this is the wrong place to post this, I apologize and please direct me to where this should go.
Cheers from Chile -
Ask The Experts How to Improve Your PC's Performance on June 1st at 3:30 pm PDT
Learn how to improve your PC 's performance on June 1st from 3:30 -4:30 pm PDT. We'll have a team of experts available to answer your questions.
When it comes to performance, your PC is similar to your car. Both need to be cared for to keep them running run well. But unlike your car, you don’t need to bring your PC into a shop for a tune up. You can easily do it yourself if you know the right steps to take. Our experts will answer your questions and provide tips on how to make your PC run better. Topics that may be covered in this real-time chat event include the following:
How to customize your PC to increase performance;
How to prolong your notebook’s battery life;
How to choose the right video card, power supply, or add the right amount of memory; or
How to use the tools built into your PC that can make it run better and fix common problems.
While you can attend this real-time chat event without signing up in advance, you must be a member of the HP Support Forums to ask questions. Signing up is easy and only takes a few moments, plus it will allow you to post questions or give answers on the Forums.
And it is all free!
So, come and learn how to get the most out of your PC. Please be sure to come on time as space is limited!
Message Edited by timhsu on 05-12-2009 05:33 PM
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.
This question was solved.
View Solution.Here is the transcript of the chat event on improving PC performance.
Please note that I have altered the transcript so that follow up questions are included in the logical order.
I am in the process of planning the next chat event. I would love to hear what topics would interest you, what day of the week and time is best for you, and if you think an hour is too long.
So, if you get a minute, please let me know.
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others. -
E72 'Add to my Nokia Messaging account' VS Create ...
Hi,
When adding an email account such as GMAIL my Nokia E72 gives me 2 options:
Add to my Nokia Messaging account
Create a separate mailbox that uses manual delivery
Again, this is an UI improvement: There is no contextual help or information regarding both options...
What are the pros and cons of using either options? Also, Vodafone proposer a similar application to connect to my mail accounts, do you know if it is any better?
Thanks,
YvsnThere is no cost for using Nokia Messaging. It does say that it is a trial version but unofficially it appears it will be a never ending trial, and anyway you won't suddenly get charged for using it.
You can use NM and Exchange and any other email clients at the same time although NM may say you already have software to receive mail but just select yes and it will carry on with the set up. You can set it to autostart or manual. I use 'Email on 3' push software but have identical accounts set up in NM which I can manually start and it will download the same emails - I use it if I need or want to see the email using html which '3' doesn't at the moment.
E71-1(241.04) RM-346 300.21.012 -
How to improve battery backup in iphone 3gs
I bought my iphone 3gs a month back. Its performance is very good. However, the battery back up hardly lasts for a day only or even less. My earlier Nokia E52 used to last for 2 to 3 days. I do not use 3G, wi-fi. Push mail is on of course. Please suggest as how to improve the battery back up. Thank you.
Take a look at this article.
Apple - Batteries - iPhone -
How to improve performance of a game in samsung mobile
hi,
I have developed a game which i am trying to port to various handsets, its works fine for nokia, sony,motorola. But it is giving problems when i run with samsung emulator.
the game became very slow when i tried running it in samsung emulator and it is taking the ket events very late.
can any one plz help in how to improve the speed of the game on samsung mobile. it kind of urgent.
ThanksHi Raj,
How is your direct access datasource built ? Is this a standard datasource or generic datasource on any view/table/function module. This strengthens my second point.
Suppose you built a virtual cube on direct access datasource built on AUFK table with Order as primary key (Order master data). when you use Order as selection on query built on this virtual cube then it retrievies the data faster than firing the query on other selections.
If your selections are different. You can possibly create a secondary index on the table with selections used in query.
Regards
vamsi -
Hi very urgent How to improve the performence of the program
Hi all please tell me how to improve the performence of this program......
REPORT z03_gil010 NO STANDARD PAGE HEADING LINE-SIZE 130.
INCLUDE *
INCLUDE: z00_bci010. " Gestion des anomalies.
Déclaration des données *
Tables de la bases de données *
TABLES:
ekpo, " Poste document d'achat.
lfa1, " Base fournisseurs (généralités).
marc, " Données division de l'article.
z03_bw_cmp1,
eord, "Répertoire des sources appro. Achats
eina, "Fiche infos-achats - données générales
t024, "Groupes d'acheteurs
tvarv. "FAE17345+
Déclaration des données internes *
Déclaration de la table interne qui permet de recuperer les mois.
DATA: BEGIN OF itb_months OCCURS 12.
INCLUDE STRUCTURE t247.
DATA: END OF itb_months.
Table pour récupération d'infos sur les divisions
DATA: BEGIN OF itb_t001w OCCURS 0,
werks LIKE t001w-werks,
fabkl LIKE t001w-fabkl," Clé du calendrier d'entreprise
END OF itb_t001w.
Déclaration de la table interne contenant les infos sur l'adresse du
fournisseur.
DATA: BEGIN OF itb_adresse OCCURS 0,
lifnr LIKE lfa1-lifnr, " Numéro de compte fournisseur.
name1 LIKE lfa1-name1, " Nom 1.
name2 LIKE lfa1-name2, " Nom 2.
name3 LIKE lfa1-name3, " Nom 3.
name4 LIKE lfa1-name4, " Nom 4.
stras LIKE lfa1-stras, " N° de rue et nom de la rue.
pstlz LIKE lfa1-pstlz, " Code postal.
ort01 LIKE lfa1-ort01, " Localité.
pfach LIKE lfa1-pfach, " Boîte postale.
pstl2 LIKE lfa1-pstl2, " Code de la boîte postale.
land1 LIKE lfa1-land1, " Clé de pays.
landx LIKE t005t-landx, " Pays.
spras LIKE lfa1-spras, " Code langue
END OF itb_adresse.
Déclaration d'une table interne pour les informations sur les
prévisions de commande.
DATA: BEGIN OF itb_prev_cde OCCURS 0,
werks LIKE marc-werks, " Division
idnlf LIKE eina-idnlf, " ADDsde ref article frn
lifnr LIKE eord-lifnr, " N° fournisseur.
ekgrp LIKE marc-ekgrp, " Groupe d'acheteurs
dispo LIKE marc-dispo, " Code gestionnaire MRP
matnr LIKE eord-matnr, " Article.
maktx LIKE makt-maktx, " Désignation article.
bstmi LIKE marc-bstmi, " Quantité de commande.
men00 LIKE plaf-gsmng, " Quantité du mois en cours M.
men01 LIKE plaf-gsmng, " Quantité pour le mois M+1.
men02 LIKE plaf-gsmng, " Quantité pour le mois M+2.
men03 LIKE plaf-gsmng, " Quantité pour le mois M+3.
men04 LIKE plaf-gsmng, " Quantité pour le mois M+4.
men05 LIKE plaf-gsmng, " Quantité pour le mois M+5.
men06 LIKE plaf-gsmng. " Quantité pour le mois M+6.
DATA: END OF itb_prev_cde.
Structure de travail pour les commandes convernant les PFC
DATA str_pca_pfc LIKE itb_prev_cde.
*add sde
DATA str_eord_pfc LIKE itb_prev_cde.
Structure de travail pour les prévisons PFC
DATA str_prev_pfc LIKE itb_prev_cde.
Déclaration d'une table interne pour les informations sur le
portefeuille des commandes d'achat.
DATA: BEGIN OF itb_pca OCCURS 0,
werks LIKE ekpo-werks, " Division
idnlf LIKE eina-idnlf, " ADDsde ref article frn
lifnr LIKE eord-lifnr, " N° fournisseur.
ekgrp LIKE marc-ekgrp, " Groupe d'acheteurs
dispo LIKE marc-dispo, " Code gestionnaire MRP
matnr LIKE eord-matnr, " Article.
maktx LIKE makt-maktx, " Désignation article.
ebeln LIKE ekes-ebeln, " Numéro du document d'achat.
ebelp LIKE ekes-ebelp, " Numéro de poste du document d'achat.
slfdt LIKE eket-slfdt, " Date de livraison statistique
eindt LIKE ekes-eindt, " Date de livraison indiquée dans la
" confirmation de la cde.
menge LIKE ekes-menge, " Quantité indiquée dans la confirma-
" tion de la commande.
attdu LIKE eket-wemng, " Portefeuille fournisseur.
netpr LIKE ekpo-brtwr, " Prix net du document d'achat dans
" la devise du document.
rtard TYPE i, " Retard en jours ouvres.
wemng LIKE eket-wemng, " Quantité de l'entrée de marchandise.
bldat LIKE mkpf-bldat, " Date inscrite sur la pièce/sur le
" document.
qtran LIKE ekes-menge, " Quantité en transit.
dtran LIKE ekes-eindt. " Date du dernier avis de transit.
DATA: END OF itb_pca.
DATA: w_i TYPE i, "Compteur
w_i_char(1) TYPE c, "Texte pour récupérer compteur
w_nm_zone(20) TYPE c, "Nom zone pour assign au field-symbols
w_nb_j TYPE i, "Nb de jours ouvrés jusqu'à fin mois
w_nb_j_tot TYPE i. "Nb de jours ouvrés du mois
FIELD-SYMBOLS: TYPE ANY.
Déclaration d'une table contenant les fiches info achat.
DATA: BEGIN OF itb_eina OCCURS 0,
matnr LIKE eina-matnr,
lifnr LIKE eina-lifnr,
idfnl LIKE eina-idnlf.
DATA: END OF itb_eina.
Déclaration d'une table contenant les infos groupe acheteur.
*DATA: BEGIN OF itb_t024 OCCURS 0,
ekgrp LIKE t024-ekgrp,
eknam LIKE t024-eknam,
ektel LIKE t024-ektel,
telfx LIKE t024-telfx.
*DATA: END OF itb_t024.
Déclaration d'une table pour le transfert du fichier.
DATA: BEGIN OF itb_transfert OCCURS 0,
col00(8), "division
col00bis(20), "Reference article
col01(18), "No article
col02(45), "libelle article
col021(17), "Groupe acheteur
col022(13), "gestionnaire
col03(17), "qte commandée ou No de commande
col04(13), "Mois 1 ou No poste cde
col05(20), "Mois 2 ou délai initial
col06(33), "Mois 3 ou délai négocié
col07(13), "Mois 4 ou qté cdée
col08(13), "Mois 5 ou qté attendue
col09(13), "Mois 6 ou Montant attendu
col10(13), "Mois 7 ou retard
col11(13), "qte partielle livree
col12(13), "date livraison partielle
col13(13), "qté en transit
col14(13). "date
DATA: END OF itb_transfert.
Déclaration d'une table contenant la liste des fournisseurs.
DATA: BEGIN OF itb_lifnr OCCURS 0,
werks LIKE marc-werks,
idfnl LIKE eina-idnlf,
lifnr LIKE eord-lifnr,
ekgrp LIKE marc-ekgrp,
spras LIKE lfa1-spras,
eknam LIKE t024-eknam,
ektel LIKE t024-ektel,
telfx LIKE t024-telfx.
DATA: END OF itb_lifnr.
Déclaration d'une structure pour la selection dans la table MSEG.
DATA : BEGIN OF itb_mseg OCCURS 0,
mblnr LIKE mseg-mblnr,
mjahr LIKE mseg-mjahr,
ebeln LIKE mseg-ebeln,
ebelp LIKE mseg-ebelp,
END OF itb_mseg.
déclaration d'une structure pour la selection dans EKPO.
DATA : BEGIN OF itb_ekpo OCCURS 0,
lifnr LIKE ekko-lifnr,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
menge LIKE ekpo-menge,
bpumz LIKE ekpo-bpumz,
bpumn LIKE ekpo-bpumn,
matnr LIKE ekpo-matnr,
werks LIKE ekpo-werks,
netpr LIKE ekpo-netpr,
peinh LIKE ekpo-peinh, "Base de prix FAE17345+
ekgrp LIKE ekko-ekgrp, "AFT++
dispo LIKE marc-dispo, "AFT++
END OF itb_ekpo.
déclaration d'une structure pour la selection dans EKPO.
DATA : BEGIN OF itb_ekko OCCURS 0,
ebeln LIKE ekko-ebeln,
lifnr LIKE ekko-lifnr,
spras LIKE ekko-spras,
END OF itb_ekko.
déclaration d'une structure pour la selection dans EKES.
DATA : BEGIN OF itb_ekes OCCURS 0,
ebeln LIKE eket-ebeln,
ebelp LIKE eket-ebelp,
ebtyp LIKE ekes-ebtyp,
eindt LIKE ekes-eindt,
menge LIKE ekes-menge,
dabmg LIKE ekes-dabmg,
etens LIKE ekes-etens,
END OF itb_ekes.
déclaration d'une structure pour la selection dans EKET
DATA : BEGIN OF itb_eket OCCURS 0,
ebeln LIKE eket-ebeln,
ebelp LIKE eket-ebelp,
menge LIKE eket-menge,
wemng LIKE eket-wemng,
eindt LIKE eket-eindt,
slfdt LIKE eket-slfdt,
END OF itb_eket.
déclaration d'une structure pour la selection dans MKPF.
DATA : BEGIN OF itb_mkpf OCCURS 0,
mblnr LIKE mkpf-mblnr,
mjahr LIKE mkpf-mjahr,
bldat LIKE mkpf-bldat,
END OF itb_mkpf.
Déclaration d'une structure pour la sélection dans EORD.
DATA : BEGIN OF itb_eord OCCURS 0,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
lifnr LIKE eord-lifnr,
ekgrp LIKE marc-ekgrp,
dispo LIKE marc-dispo, "DE3K924352
disls LIKE marc-disls,
bstfe LIKE marc-bstfe,
bstrf LIKE marc-bstrf,
bstmi LIKE marc-bstmi,
bstma LIKE marc-bstma,
END OF itb_eord.
DATA : BEGIN OF itb_eordw OCCURS 0.
INCLUDE STRUCTURE itb_eord.
DATA : END OF itb_eordw.
Déclaration d'une structure pour la sélection dans MAKT.
DATA : BEGIN OF itb_makt OCCURS 0,
matnr LIKE makt-matnr,
spras LIKE makt-spras,
maktx LIKE makt-maktx,
END OF itb_makt.
Déclaration d'une structure pour la sélection dans EBAN.
DATA : BEGIN OF itb_eban OCCURS 0,
matnr LIKE eban-matnr,
werks LIKE eban-werks,
flief LIKE eban-flief,
lfdat LIKE eban-lfdat,
menge LIKE eban-menge,
bsmng LIKE eban-bsmng,
webaz LIKE eban-webaz,
ekgrp LIKE eban-ekgrp,
ebeln LIKE eban-ebeln,
banfn LIKE eban-banfn,
bnfpo LIKE eban-bnfpo, "DB3K900702+
END OF itb_eban.
Déclaration d'une structure pour la sélection dans PLAF.
DATA : BEGIN OF itb_plaf OCCURS 0,
plnum LIKE plaf-plnum, "DB3K900702+
matnr LIKE plaf-matnr,
plwrk LIKE plaf-plwrk,
flief LIKE plaf-flief,
pedtr LIKE plaf-pedtr,
gsmng LIKE plaf-gsmng,
webaz LIKE plaf-webaz,
END OF itb_plaf.
Déclaration d'une structure pour la sélection dans MARC.
DATA : BEGIN OF itb_marc OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
disls LIKE marc-disls,
bstrf LIKE marc-bstrf,
bstmi LIKE marc-bstmi,
bstma LIKE marc-bstma,
bstfe LIKE marc-bstfe,
ekgrp LIKE marc-ekgrp,
dispo LIKE marc-dispo,
END OF itb_marc.
DATA : BEGIN OF itb_marc_eord OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
strgr LIKE marc-strgr, "groupe de stratégie planif
END OF itb_marc_eord.
DATA : BEGIN OF itb_z03_bw_cmp1 OCCURS 0,
matnr LIKE z03_bw_cmp1-matnr,
werks LIKE z03_bw_cmp1-werks,
pdatu LIKE z03_bw_cmp1-pdatu,
plnmg LIKE z03_bw_cmp1-plnmg,
END OF itb_z03_bw_cmp1.
Begin change BNI <DE3K937051>
DATA : BEGIN OF itb_z03_bw_cmp2 OCCURS 0,
matnr LIKE z03_bw_cmp2-matnr,
werks LIKE z03_bw_cmp2-werks,
pdatu LIKE z03_bw_cmp2-pdatu,
plnmg LIKE z03_bw_cmp2-plnmg,
END OF itb_z03_bw_cmp2.
*End change BNI
DATA : BEGIN OF str_index1,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index1.
DATA : BEGIN OF str_index2,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index2.
DATA : BEGIN OF str_index3_eord,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index3_eord.
DATA : BEGIN OF str_index4,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index4.
DATA : BEGIN OF str_index5,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index5.
DATA : BEGIN OF str_index6,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index6.
DATA : BEGIN OF str_index7,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index7.
Déclaration des variables de debut et de fin de mois.
DATA: w_debut_mois LIKE sy-datum,
w_debut_periode LIKE sy-datum,
w_fin_mois LIKE sy-datum,
w_fin_periode LIKE sy-datum.
Déclaration des variables pour les dates.
DATA: w_date0 LIKE sy-datum,
w_date1 LIKE sy-datum,
w_date2 LIKE sy-datum,
w_date3 LIKE sy-datum,
w_date4 LIKE sy-datum,
w_date5 LIKE sy-datum,
w_date6 LIKE sy-datum,
w_datejour LIKE sy-datum, "FAE15269
w_dat_da LIKE eban-lfdat,
w_dat_op LIKE plaf-pedtr,
w_mois0 LIKE t247-ltx,
w_mois1 LIKE t247-ltx,
w_mois2 LIKE t247-ltx,
w_mois3 LIKE t247-ltx,
w_mois4 LIKE t247-ltx,
w_mois5 LIKE t247-ltx,
w_mois6 LIKE t247-ltx,
w_lendemain LIKE sy-datum. "FAE17345+
Temoin d'un AR dans la commande d'achat.
DATA: w_temoin_ar.
Numéro de la confirmation de la commande
DATA : w_etens LIKE ekes-etens.
Déclaration des variables pour le nom des fichiers.
DATA: w_nom_fichier LIKE rlgrap-filename,
w_fichier LIKE rlgrap-filename,
w_racine LIKE rlgrap-filename,
w_file LIKE rlgrap-filename.
Déclaration d'une table interne pour le transfert.
DATA: BEGIN OF itb_trans OCCURS 0,
w_ligne(320).
DATA: END OF itb_trans.
Déclaration d'une variable pour rechercher les enregistrements vides.
DATA: w_compteur TYPE i,
w_compteur1 TYPE i,
w_compteur2 TYPE i,
w_retard TYPE i, " Retard en jours ouvres.
w_trouve_pfc TYPE c, "addsde
w_trouve_pfs TYPE c, "+DE3K937051
w_trouve TYPE c.
*Index pour les LOOP
DATA : w_index_ekpo LIKE sy-tabix,
w_index_ekes LIKE sy-tabix,
w_index_eket LIKE sy-tabix,
w_index_mseg LIKE sy-tabix,
w_index_eban LIKE sy-tabix,
w_index_plaf LIKE sy-tabix,
w_index_pca LIKE sy-tabix,
w_index_z03_bw_cmp1 LIKE sy-tabix,
w_index_z03_bw_cmp2 LIKE sy-tabix."+DE3K937051
RANGES : r_type_pfs FOR marc-strgr.
*fichier sur serveur +EDR231003
DATA : w_chemin LIKE filename-fileintern, "nom du fichier
w_date_fichier(12) TYPE c, "Date format DD_MM_AA
w_csv(307) TYPE c. "ligne du fichier format CSV
CONSTANTS: k_imputation_m LIKE eban-knttp VALUE 'M'. "FAE19001+
Description de l écran de sélection *
Paramètres "UTILISATION" *
Ouverture d'un block de sélection pour le(s) fournisseur(s).
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-bl1.
Sélection division(s)
SELECT-OPTIONS: s_werks FOR ekpo-werks.
Sélection fournisseur(s).
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr OBLIGATORY.
Sélection du Groupe d'acheteur
*SELECT-OPTIONS: s_ekgrp FOR marc-ekgrp. "-FAE26446
*SELECT-OPTIONS: s_dispo FOR marc-dispo. "-FAE26446
SELECTION-SCREEN END OF BLOCK block1.
FAE 26446 : ajout
SELECTION-SCREEN BEGIN OF BLOCK block3 WITH FRAME TITLE text-bl3.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER p_ekgrp RADIOBUTTON GROUP g3.
SELECTION-SCREEN COMMENT 5(24) text-001 FOR FIELD p_ekgrp.
SELECT-OPTIONS: s_ekgrp FOR marc-ekgrp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER p_dispo RADIOBUTTON GROUP g3.
SELECTION-SCREEN COMMENT 5(24) text-002 FOR FIELD p_dispo.
SELECT-OPTIONS: s_dispo FOR marc-dispo.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block3.
FAE 26446 : fin ajout
Paramètres "SYSTEME" *
Saut de 2 lignes.
SELECTION-SCREEN: SKIP 2.
Ouverture d'un block de sélection pour l'adresse physique du fichier.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-bl2.
PARAMETERS: p_pc RADIOBUTTON GROUP rad1 DEFAULT 'X', "+EDR231003
p_fic_pc LIKE rlgrap-filename. "+EDR231003
SELECTION-SCREEN SKIP. "+EDR231003
PARAMETERS : p_serve RADIOBUTTON GROUP rad1, "+EDR231003
p_fic_se LIKE filename-fileintern "+EDR231003
DEFAULT 'Z03_PREV_COMMANDES'. "+EDR231003
SELECTION-SCREEN END OF BLOCK block2.
Logique de traitement *
INITIALIZATION *
INITIALIZATION.
Date du jour
MOVE sy-datum TO w_datejour. "FAE15269
Gestion des anomalies.
MOVE text-lb1 TO w_lb_traitement.
PERFORM f930_init USING sy-cprog '30'.
Fin de la gestions des anomalies.
Récuperation des mois dans la table interne 'ITB_MONTHS'.
CALL FUNCTION 'MONTH_NAMES_GET'
EXPORTING
language = sy-langu
TABLES
month_names = itb_months
EXCEPTIONS
month_names_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Récupération des differentes periodes.
PERFORM f100_recuperation_date TABLES itb_months.
Récupération du debut du mois.
CONCATENATE sy-datlo(6) '01' INTO w_debut_mois.
MOVE: w_debut_mois TO w_debut_periode.
Récupération du dernier jour du mois.
CALL FUNCTION 'LAST_DAY_OF_MONTHS'
EXPORTING
day_in = sy-datlo
IMPORTING
last_day_of_month = w_fin_mois
EXCEPTIONS
day_in_no_date = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TOP-OF-PAGE *
TOP-OF-PAGE.
CALL FUNCTION 'Z_00_BC_TOP_OF_PAGE'
EXPORTING
p_linsz = k_ligne
p_pagno = sy-pagno
p_prog = sy-cprog
p_projet = k_projet
p_societe = k_societe
p_sujet = sy-title.
END-OF-PAGE *
END-OF-PAGE.
AT SELECTION-SCREEN *
FAE 26446 : ajout
AT SELECTION-SCREEN ON BLOCK block3.
IF NOT ( s_ekgrp IS INITIAL )
AND NOT ( s_dispo IS INITIAL ).
MESSAGE e394(z03_mm).
ENDIF.
IF p_ekgrp = 'X'.
IF s_ekgrp IS INITIAL.
MESSAGE e395(z03_mm).
ENDIF.
ELSE.
IF s_dispo IS INITIAL.
MESSAGE e396(z03_mm).
ENDIF.
ENDIF.
fae26446 fin ajout
AT SELECTION-SCREEN ON BLOCK block2.
IF p_pc = 'X'.
IF p_fic_pc IS INITIAL.
*Attention, il n'y a aucune adresse de sauvegarde pour le(s) fichier(s)
MESSAGE e021(z03_mm).
ENDIF.
ELSE.
IF p_fic_se IS INITIAL.
*Attention, il n'y a aucune adresse de sauvegarde pour le(s) fichier(s)
MESSAGE e021(z03_mm).
ENDIF.
ENDIF.
Création du matchcode pour la selection du fichier local.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fic_pc.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = p_fic_pc
def_path = 'C:'
mask = text-ma1
mode = 'S'
title = text-sel
IMPORTING
filename = p_fic_pc
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc NE 0 AND sy-subrc NE 3.
MESSAGE e032(z03_mm).
ENDIF.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM select_donnees.
=================================================
Liste des ARTICLES impactés pour les prévisions *
=================================================
===================================
PORTEFEUILLE DE COMMANDES D'ACHAT *
===================================
Construction itb_pca à partir de EKKO/EKPO.
w_index_ekpo = 1.
w_index_ekes = 1.
w_index_eket = 1.
w_index_mseg = 1.
SORT itb_ekko BY ebeln. "-FAE26446
SORT itb_ekpo BY ebeln ebelp.
SORT itb_makt BY matnr spras.
SORT itb_eket BY ebeln ebelp.
SORT itb_ekes BY ebeln ebelp.
SORT itb_mseg BY ebeln ebelp.
SORT itb_mkpf BY mblnr mjahr.
SORT itb_marc BY matnr werks. "+FAE26446
FAE 26446 remplacement
LOOP AT itb_ekko.
LOOP AT itb_ekpo.
FROM w_index_ekpo.
IF itb_ekko-ebeln = itb_ekpo-ebeln.
LOOP AT itb_ekpo.
READ TABLE itb_marc WITH KEY
matnr = itb_ekpo-matnr
werks = itb_ekpo-werks BINARY SEARCH.
CHECK sy-subrc = 0.
FAE 26446 fin remplacement
itb_pca-ebeln = itb_ekpo-ebeln.
itb_pca-ebelp = itb_ekpo-ebelp.
itb_pca-lifnr = itb_ekko-lifnr. "-FAE26446
itb_pca-lifnr = itb_ekpo-lifnr. "+FAE26446
itb_pca-ekgrp = itb_ekpo-ekgrp. "+FAE26446
itb_pca-dispo = itb_ekpo-dispo. "+FAE26446
itb_pca-matnr = itb_ekpo-matnr.
itb_pca-werks = itb_ekpo-werks.
Recherche du libellé article
READ TABLE itb_makt
WITH KEY matnr = itb_ekpo-matnr
spras = text-fra
BINARY SEARCH.
IF sy-subrc = 0.
itb_pca-maktx = itb_makt-maktx.
ELSE.
READ TABLE itb_makt
WITH KEY matnr = itb_ekpo-matnr
spras = text-ang
BINARY SEARCH.
IF sy-subrc = 0.
itb_pca-maktx = itb_makt-maktx.
ENDIF.
ENDIF.
IF NOT itb_ekpo-bpumn IS INITIAL.
itb_pca-menge = itb_ekpo-menge * itb_ekpo-bpumz /
itb_ekpo-bpumn.
ENDIF.
Sélect° ds la table EKES des dates de livraisons et des qtés
en transit
CLEAR w_temoin_ar.
CLEAR w_etens.
LOOP AT itb_ekes
FROM w_index_ekes.
IF itb_ekes-ebeln = itb_ekpo-ebeln
AND itb_ekes-ebelp = itb_ekpo-ebelp.
IF itb_ekes-ebtyp = text-arn.
itb_pca-eindt = itb_ekes-eindt.
w_temoin_ar = 'X'.
ELSE.
Si c'est une qté en transit alors on recupere
la quantité et la date.
IF itb_ekes-dabmg < itb_ekes-menge.
itb_pca-qtran = itb_pca-qtran + itb_ekes-menge -
itb_ekes-dabmg.
ENDIF.
IF itb_ekes-etens > w_etens.
w_etens = itb_ekes-etens.
itb_pca-dtran = itb_ekes-eindt.
ENDIF.
ENDIF.
ELSEIF itb_ekes-ebeln > itb_ekpo-ebeln
OR ( itb_ekes-ebeln = itb_ekpo-ebeln
AND itb_ekes-ebelp > itb_ekpo-ebelp ).
w_index_ekes = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
S'il n'y a pas d'AR alors récupérat° de la date livraison dans EKET.
LOOP AT itb_eket
FROM w_index_eket.
IF itb_eket-ebeln = itb_ekpo-ebeln
AND itb_eket-ebelp = itb_ekpo-ebelp.
IF w_temoin_ar IS INITIAL.
itb_pca-eindt = itb_eket-eindt.
ENDIF.
itb_pca-slfdt = itb_eket-slfdt.
Calcul du portefeuille fournisseur à partir de la
qté commandée et la qté reçue
itb_pca-attdu = itb_pca-attdu + itb_eket-menge -
itb_eket-wemng.
Calcul du montant du poste
itb_pca-netpr = itb_ekpo-netpr * itb_pca-attdu.
IF itb_ekpo-peinh NE 0.
itb_pca-netpr = itb_pca-netpr / itb_ekpo-peinh.
ENDIF.
Calcul quantité réceptionnée.
itb_pca-wemng = itb_pca-wemng + itb_eket-wemng.
Calcul du retard en nombre de jours calendaires
Le calcul du retard ne doit pas prendre en compte
le jour de livraison
ADD 1 TO itb_eket-eindt.
IF NOT itb_pca-attdu IS INITIAL
AND itb_eket-eindt LT sy-datum.
Calcul du retard en nombre de jours ouvrés
CLEAR w_retard.
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
EXPORTING
date_deb = itb_eket-eindt
date_fin = sy-datum
IMPORTING
jours = w_retard.
itb_pca-rtard = itb_pca-rtard + w_retard .
ENDIF.
ELSEIF itb_eket-ebeln > itb_ekpo-ebeln
OR ( itb_eket-ebeln = itb_ekpo-ebeln
AND itb_eket-ebelp > itb_ekpo-ebelp ).
w_index_eket = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
Recherche de la derniere date de livraison.
LOOP AT itb_mseg
FROM w_index_mseg.
IF itb_mseg-ebeln = itb_ekpo-ebeln
AND itb_mseg-ebelp = itb_ekpo-ebelp.
READ TABLE itb_mkpf
WITH KEY mblnr = itb_mseg-mblnr
mjahr = itb_mseg-mjahr
BINARY SEARCH.
IF sy-subrc = 0.
IF itb_mkpf-bldat > itb_pca-bldat.
itb_pca-bldat = itb_mkpf-bldat.
ENDIF.
ENDIF.
ELSEIF itb_mseg-ebeln > itb_ekpo-ebeln
OR ( itb_mseg-ebeln = itb_ekpo-ebeln
AND itb_mseg-ebelp > itb_ekpo-ebelp ).
w_index_mseg = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
APPEND itb_pca.
CLEAR itb_pca.
FAE26446 suppression parag. suivant
ELSEIF itb_ekpo-ebeln > itb_ekko-ebeln.
w_index_ekpo = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
Fin FAE26446
ENDLOOP.
=========================
PREVISIONS DE COMMANDES *
=========================
SORT itb_eord BY matnr werks lifnr ekgrp.
SORT itb_eban BY matnr werks flief ekgrp.
SORT itb_plaf BY matnr plwrk flief.
SORT itb_z03_bw_cmp1 BY matnr werks.
SORT itb_z03_bw_cmp2 BY matnr werks."+DE3K937051
SORT itb_pca BY matnr werks lifnr.
w_index_eban = 1.
w_index_plaf = 1.
w_index_z03_bw_cmp1 = 1.
w_index_pca = 1.
w_index_z03_bw_cmp2 = 1."+DE3K937051
Remplissage de la table des prévisions de commande.
LOOP AT itb_eord.
CLEAR: str_prev_pfc,
w_trouve.
MOVE-CORRESPONDING itb_eord TO str_index1.
MOVE-CORRESPONDING itb_eord TO str_index3_eord.
MOVE-CORRESPONDING itb_eord TO itb_prev_cde.
Recherche dans table division/article (MARC) afin de déterminer si
article PFS (prod fabriqué à stock) ou PFC (Prod fabriqué sur cde)
AT NEW werks.
READ TABLE itb_marc_eord
WITH KEY matnr = itb_eord-matnr
werks = itb_eord-werks
BINARY SEARCH.
IF sy-subrc NE 0.
CLEAR itb_marc_eord.
ENDIF.
ENDAT.
a - Prévisions pour les PFS : DA + OP *
*Calcul des quantités de commande.
IF itb_eord-disls = text-tl1.
itb_prev_cde-bstmi = itb_eord-bstfe.
ELSEIF itb_eord-disls = text-tl2
OR itb_eord-disls = text-tl3.
IF itb_eord-bstrf NE 0
AND itb_eord-bstmi = 0
AND itb_eord-bstma = 0.
itb_prev_cde-bstmi = itb_eord-bstrf.
ELSEIF itb_eord-bstrf NE 0
AND itb_eord-bstmi NE 0.
itb_prev_cde-bstmi = itb_eord-bstmi.
ELSEIF itb_eord-bstrf = itb_eord-bstma
AND itb_eord-bstrf NE 0
AND itb_eord-bstmi = 0.
itb_prev_cde-bstmi = itb_eord-bstma.
ENDIF.
ENDIF.
si article PFS (Prod fabriqué à stock) recherche des
demandes d'achat ou ordres planfiés
IF itb_marc_eord-strgr IN r_type_pfs.
Récupérat° calendrier de la division pour calcul correct lors de
l'ajout de eban-webaz ou plaf-webaz jours ouvrés
CLEAR w_trouve_pfs ."+DE3K937051
READ TABLE itb_t001w
WITH KEY werks = itb_eord-werks
BINARY SEARCH.
IF sy-subrc = 0.
LOOP AT itb_eban
FROM w_index_eban.
MOVE-CORRESPONDING itb_eban TO str_index2.
IF str_index1 = str_index2.
w_trouve_pfs = 'X'."+DE3K937051
si qte commandées pour la DA < quantité de la DA
IF itb_eban-bsmng < itb_eban-menge.
ajout de quantité de la DA - qte commandée pour la DA
PERFORM affect_da.
ENDIF.
ELSEIF str_index2 > str_index1.
w_index_eban = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
ENDIF.
ajout des quantité des OP (ordres planifiés)
LOOP AT itb_plaf
FROM w_index_plaf.
MOVE-CORRESPONDING itb_plaf TO str_index4.
str_index4-werks = itb_plaf-plwrk.
str_index4-lifnr = itb_plaf-flief.
IF str_index4 = str_index3_eord.
Ajout de webaz jours ouvrés à pedtr
CALL FUNCTION 'Z_03_MM_ADD_TO_FACTORYDATE'
EXPORTING
i_date = itb_plaf-pedtr
i_calendar_id = itb_t001w-fabkl
i_nb_days = itb_plaf-webaz
IMPORTING
o_date = w_dat_op
EXCEPTIONS
conv_error = 1
OTHERS = 2.
IF sy-subrc
If forecasts found in Z03_BW_CMP2 for the article
IF w_trouve_pfs = 'X'."-DE3K937602
Recalculation prev month M in fct of Nb of wrought days of the month
IF NOT itb_prev_cde-men00 IS INITIAL.
one does not hold any more account of the day in progress
w_lendemain = w_date0 + 1.
CLEAR:w_nb_j,w_nb_j_tot. "DE3K938206+
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
EXPORTING
date_deb = w_lendemain
date_fin = w_fin_mois
IMPORTING
jours = w_nb_j.
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_MONTH'
EXPORTING
date = w_lendemain
IMPORTING
jours = w_nb_j_tot.
itb_prev_cde-men00 = itb_prev_cde-men00 * w_nb_j / w_nb_j_tot
*CLA DE3K925301 FAE27197
*to round has the higher entirety
itb_prev_cde-men00 = ceil( itb_prev_cde-men00 ). "DE3K938206-
ENDIF.
ENDIF."-DE3K937602
*End change BNI
b - Prévisions pour les PFC (Z03_BW_CMP1 puis rééquilibrage) *
Recherche des previsions dans Z03_BW_CMP1
si article PFC (Prod fabriqué sur cde) recherche des prévisions
IF NOT itb_marc_eord-strgr IN r_type_pfs.
CLEAR str_prev_pfc.
MOVE-CORRESPONDING itb_eord TO str_prev_pfc.
CLEAR w_trouve_pfc .
LOOP AT itb_z03_bw_cmp1
FROM w_index_z03_bw_cmp1.
MOVE-CORRESPONDING itb_z03_bw_cmp1 TO str_index7.
MOVE-CORRESPONDING itb_eord TO str_index6.
IF str_index6 = str_index7.
si on trouve des prévisions dans z03_bw_cmp1 pour la source
d'appro eord alors c'est un article PFC
w_trouve_pfc = 'X'.
CASE itb_z03_bw_cmp1-pdatu+0(6).
WHEN w_date0+0(6).
str_prev_pfc-men00 = itb_z03_bw_cmp1-plnmg.
WHEN w_date1+0(6).
str_prev_pfc-men01 = itb_z03_bw_cmp1-plnmg.
WHEN w_date2+0(6).
str_prev_pfc-men02 = itb_z03_bw_cmp1-plnmg.
WHEN w_date3+0(6).
str_prev_pfc-men03 = itb_z03_bw_cmp1-plnmg.
WHEN w_date4+0(6).
str_prev_pfc-men04 = itb_z03_bw_cmp1-plnmg.
WHEN w_date5+0(6).
str_prev_pfc-men05 = itb_z03_bw_cmp1-plnmg.
WHEN w_date6+0(6).
str_prev_pfc-men06 = itb_z03_bw_cmp1-plnmg.
WHEN OTHERS.
ENDCASE.
ELSEIF str_index7 > str_index6.
w_index_z03_bw_cmp1 = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
*Begin change BNI
Si des prévisions trouvées dans Z03_BW_CMP1 pour l'article
IF w_trouve_pfc = 'X'.
Recalcul prev mois M en fct du nb de jours ouvrés du mois
IF NOT str_prev_pfc-men00 IS INITIAL.
on ne tient plus compte du jour en cours
w_lendemain = w_date0 + 1.
CLEAR:w_nb_j,w_nb_j_tot. "DE3K938206+
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
EXPORTING
date_deb = w_lendemain
date_fin = w_fin_mois
IMPORTING
jours = w_nb_j.
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_MONTH'
EXPORTING
date = w_lendemain
IMPORTING
jours = w_nb_j_tot.
str_prev_pfc-men00 = str_prev_pfc-men00 * w_nb_j / w_nb_j_tot.
*CLA DE3K925301 FAE27197
*arrondir a l'entier supèrieur
str_prev_pfc-men00 = ceil( str_prev_pfc-men00 ).
ENDIF.
Equilibrage PFC : commande/prévision du mois
Recherche COMMANDES cumulées pour M à M+6
CLEAR str_pca_pfc.
LOOP AT itb_pca
FROM w_index_pca.
MOVE-CORRESPONDING itb_pca TO str_index5.
IF str_index5 = str_index3_eord.
IF NOT itb_pca-menge IS INITIAL.
CASE itb_pca-eindt+0(6).
WHEN w_date0+0(6).
IF itb_pca-eindt >= w_date0.
str_pca_pfc-men00 = str_pca_pfc-men00 + itb_pca-menge.
ENDIF.
WHEN w_date1+0(6).
str_pca_pfc-men01 = str_pca_pfc-men01 + itb_pca-menge.
WHEN w_date2+0(6).
str_pca_pfc-men02 = str_pca_pfc-men02 + itb_pca-menge.
WHEN w_date3+0(6).
str_pca_pfc-men03 = str_pca_pfc-men03 + itb_pca-menge.
WHEN w_date4+0(6).
str_pca_pfc-men04 = str_pca_pfc-men04 + itb_pca-menge.
WHEN w_date5+0(6).
str_pca_pfc-men05 = str_pca_pfc-men05 + itb_pca-menge.
WHEN w_date6+0(6).
str_pca_pfc-men06 = str_pca_pfc-men06 + itb_pca-menge.
ENDCASE.
ENDIF."NOT itb_pca-menge IS INITIAL
ELSEIF str_index5 > str_index3_eord.
w_index_pca = sy-tabix.
EXIT.
ENDIF.
ENDLOOP."itb_pca
*. Equilibrer commande / prévision des mois : diminuer la quantité de
prévision de chaque mois par le portefeuille de commande client du
mois*. Si ce solde est négatif alors lui donner la valeur 0.
w_i = 0.
Ajustement commandes/prévisions pour les mois M à M+6
WHILE w_i .
Pour un mois, SI Prévisions > Commandes en cours
IF .
Prévisions = Prévisions - Commandes en cours
= 0.
ENDIF.
On passe au mois suivant
w_i = w_i + 1.
ENDWHILE.
MOVE str_prev_pfc-men00 TO itb_prev_cde-men00.
MOVE str_prev_pfc-men01 TO itb_prev_cde-men01.
MOVE str_prev_pfc-men02 TO itb_prev_cde-men02.
MOVE str_prev_pfc-men03 TO itb_prev_cde-men03.
MOVE str_prev_pfc-men04 TO itb_prev_cde-men04.
MOVE str_prev_pfc-men05 TO itb_prev_cde-men05.
MOVE str_prev_pfc-men06 TO itb_prev_cde-men06.
Hi
You check in SM50 by executing the programing, You will come to know which select is taking more time and accordingly you modify that select.
You can do SQL trace and Run time analysis and analyse and see.
check this and use
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Regards
Anji
Maybe you are looking for
-
Using BI to generate XML file - no formatting required
If I just want the XML file from BI PUblisher (ie in the flat file format) - I don't need to use a template (ie excel, RTF, HTML etc) is this possible?? Do I need to attach a dummy template against the data template definition or could I simply just
-
How do I transfer my music from one PC to another PC with ipod?
I currently have my music in one PC and just bought another PC for the home. How do I transfer my music from one PC to another without reloading all the music?
-
JDBC 2.0 method not supported Error occuring in WL 6.1 sp1
Hi , When I connect to a mssqlserver 2000 using a session bean and execute the following statement "stmDataAccess=conDataAccess.createStatement(ResultSet.CONCUR_UPDATABLE,ResultSet.TYPE_SCROLL_INSENSITIVE);" i get the following error at the client an
-
Sony Vaio Laptop Won't Turn On
I have a Sony Vaio laptop that turns off every time I turn it on. I have taken it in for repairs and they can't that nothing is wrong with it and they can turn it on. They even run diagnostics and have opened it up and can't find a problem. I did upd
-
Control-eject shortcut to shut down stops working?
The control-eject shortcut and the disc eject button don't work anymore on my keyboard. I recently took an upgrade to 10.4.9 and had a few issues with the 'make alias' command in my Applications folder but repair permissions fixed that. Now I notice