How to improve the speed for backing up files to time capsule via in hose wifi?

via in hose wifi?
Use a bigger hose??
House??
Need to spell this out a bit more..
But speed via 2.4ghz to the TC is restricted by Apple to max 130mbps link speed.. much slower actual transfer.. latest TC and laptops can do 450mbps on 5ghz but you need to be up close.. so place the TC near the device using it.. and force 5ghz connection by using a different name for 5ghz network.

Similar Messages

How to increase the speed of video (avi file) using labview

How to increase the speed of video (.avi file) using labview? I have tried this by skiping alternate frames. also I have used minimum time delay.Is there any other option for which i can go?
please suggest me...........

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Can you rename backed up files on time capsule?

Can you rename backed up file on time capsule?

You can rename the sparsebundle file that Time Machine has used for the backups of a Mac on a Time Capsule.....if that is what you are asking......just like you can rename any file on a Mac.

How do I know I have backed up on my time capsule?

Trying to back up on new time capsule. Not sure if it worked. Instructions seemd very vague.

Welcome to Apple Support Communities
There are different ways to check that the backup was made correctly. One of them is to select the Time Machine icon on the menu bar and check the date of the last backup.
If you want more information, open System Preferences > Time Machine, that will allow you to check when the last backup was made and if it succeeded or failed. To know more information about Time Machine, read Pondini's page > http://pondini.org

How do I access my other computer's files on TIME Capsule.

I have a Mac Book Pro (late 2011) and a Mac Air (2013) and I just backed them both up to Time Capsule. BUT, when I go into Time Capsule I only see the files downloaded from that respective computer. I've read the posts about looking in FINDER and and looking under the SHARED section but only see one Time Capsule.
Can someone please walk me through this process - Thank You.

How do I use the (not so intuitive) Time Machine display?
How do I view or restore selected items?
From Here > http://pondini.org/TM/FAQ.html

I cannot access the external hard drive connected to my time capsule via wifi

I have two external hard drives (a WD mybook and an older Seagate, both HFS+ formatted) connected via a USB hub to my time capsule (which is also my wifi router).
Here's the funny thing: If I a connect my mac mini to the time capsule via an ethernet cable, both disks show up as normal in Finder - along with 'Data' under Time Capsule under Shared.
But if I disconnect the ethernet cable and connect to the router via wifi, there's no sign at all of the two disks - not in Finder, and not under 'Disks' in the Airport Utility.
Anyone out there with a solution?!

Hi William, and thanks for replying.
I do have a guest network set up (for exactly that reason that guests don't get access to shared disks) but am definitely not connected to it.
So sadly it has to be something else.

How to improve the performance for integrating third party search engine

hi,
I have been working on integrating verity search engine with KM. the performance for retrieving search result totally depend on how many search result returned, for example if there is less than 10 records, it only takes 3 seconds, but if there are 200 records, it takes about 3 minutes, is it normal? anyway to improve it? Thanks!
T.J.

Thilo,
thanks for the response, would you recommend some document for configuring KM cache service, I did change memory cache, and also dynamic web reposity, whatelse out there that I can change? right now, I have one instance(EP6.4 sp11) works well, it returns 200 records from Stellent within 6s. But when I put this KM global service on EP6.0 sp2 (our current system) it takes about 15s. I am not sure is this because of different EP version, or something else. I have tried my best to slim down SOAP component from Stellent. I don't think anything else can be done from that side anymore. before I changed the SOAP, it tooks about 60s. just wonder what else I can do on KM side to improve it performance? Thanks!
T.J.

How to improve the speed of creating multiple strings from a char[]?

Hi,
I have a char[] and I want to create multiple Strings from the contents of this char[] at various offsets and of various lengths, without having to reallocate memory (my char[] is several tens of megabytes large). And the following function (from java/lang/String.java) would be perfect apart from the fact that it was designed so that only package-private classes may benefit from the speed improvements it offers:
    // Package private constructor which shares value array for speed.
    String(int offset, int count, char value[]) {
     this.value = value;
     this.offset = offset;
     this.count = count;
    }My first thought was to override the String class. But java.lang.String is final, so no good there. Plus it was a really bad idea to start with.
My second thought was to make a java.lang.FastString which would then be package private, and could access the string's constructor, create a new string and then return it (thought I was real clever here) but no, apparently you cannot create a class within the package java.lang. Some sort of security issue.
I am just wondering first if there is an easy way of forcing the compiler to obey me, or forcing it to allow me to access a package private constructer from outside the package. Either that, or some sort of security overrider, somehow.

My laptop can create and garbage collect 10,000,000 Strings per second from char[] "hello world". That creates about 200 MB of strings per second (char = 2B). Test program below.
A char[] "tens of megabytes large" shouldn't take too large a fraction of a second to convert to a bunch of Strings. Except, say, if the computer is memory-starved and swapping to disk. What kind of times do you get? Is it at all possible that there is something else slowing things down?
using (literally) millions of charAt()'s would be
suicide (code-wise) for me and my program."java -server" gives me 600,000,000 charAt()'s per second (actually more, but I put in some addition to prevent Hotspot from optimizing everything away). Test program below. A million calls would be 1.7 milliseconds. Using char[n] instead of charAt(n) is faster by a factor of less than 2. Are you sure millions of charAt()'s is a huge problem?
public class t1
    public static void main(String args[])
     char hello[] = "hello world".toCharArray();
     for (int n = 0; n < 10; n++) {
         long start = System.currentTimeMillis();
         for (int m = 0; m < 1000 * 1000; m++) {
          String s1 = new String(hello);
          String s2 = new String(hello);
          String s3 = new String(hello);
          String s4 = new String(hello);
          String s5 = new String(hello);
         long end = System.currentTimeMillis();
         System.out.println("time " + (end - start) + " ms");
public class t2
    static int global;
    public static void main(String args[])
     String hello = "hello world";
     for (int n = 0; n < 10; n++) {
         long start = System.currentTimeMillis();
         for (int m = 0; m < 10 * 1000 * 1000; m++) {
          global +=
              hello.charAt(0) + hello.charAt(1) + hello.charAt(2) +
              hello.charAt(3) + hello.charAt(4) + hello.charAt(5) +
              hello.charAt(6) + hello.charAt(7) + hello.charAt(8) +
              hello.charAt(9);
          global +=
              hello.charAt(0) + hello.charAt(1) + hello.charAt(2) +
              hello.charAt(3) + hello.charAt(4) + hello.charAt(5) +
              hello.charAt(6) + hello.charAt(7) + hello.charAt(8) +
              hello.charAt(9);
         long end = System.currentTimeMillis();
         System.out.println("time " + (end - start) + " ms");
}

How to set the name for an 'unknown' file extension?

Specifics:
I have various file extensions that are recognized by my mac. I would like to know how to create a list of applications that can open it so I do not get a 'There is no Default Application to open this file' error. I would also like to be able to give these file extensions names recognized by the mac.
Just like .txt is a "Textedit Document" and .html is a "HTML Document," I'd like to be able to change the name and assosication of a file and give it its own .icns if possible.
As for the default applications, I know how to set a default application. However, if a mac does not recognize a file extension, adding a new default application to run the file wil actually erase the old one, which is a big pain, especially when your file can be opened with ANY text editor.
I understand that this may involve hacking into the operating system's databases, but if anyone can help, it would be greatly appreciated.

Hi Timo,
My jdev version is 10.1.3.3.0, this is for R12. By PR i mean to say process request and PFR process form request in the controller.
In the Process request of the controller, i am finding the checkbox bean and assigning the firepartialaction for it.
Later in the process form request for the fired event, i am trying to handle the rendered property of the messagetextinput. Is this a right approach?
my code below
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OAMessageCheckBoxBean oamessagecheckboxbean = (OAMessageCheckBoxBean)oawebbean.findChildRecursive("X_FLAG");
if(oamessagecheckboxbean != null)
oapagecontext.writeDiagnostics(this, "Message check box Bean found:", 1);
FirePartialAction firepartialaction = new FirePartialAction("change");
oamessagecheckboxbean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR, firepartialaction);
oamessagecheckboxbean.setFireActionForSubmit("change", null, null, true);
oapagecontext.writeDiagnostics(this, "setting fire event", 1);
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processFormRequest(oapagecontext, oawebbean);
oapagecontext.writeDiagnostics(this, "Inside Process Form Request", 1);
if("change".equals(oapagecontext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
OAMessageTextInputBean bean = (OAMessageTextInputBean)oawebbean.findChildRecursive("X_NUMBER");
if(bean!=null){
bean.setRendered(Boolean.TRUE);}
Thanks,
Malar

How to set the classpath for external .jar files after importing?

Hi techs,
How to set the classpath in WSAD5.1.2 after importing the .jar file to the WEB-INF/lib folder.
urgent

I got it.
after importing the jar file to the perspective,we need to right click on project name, go to proprties,
goto java build path,
there we need to include the external jar files.

How to delete backed up files from Time Capsule in Lion.

Since I upgraded to Lion I have been unable to delete old backed up items in Time Machine. I use Time Capsule and previously with Snow Leopard I could right click on a file and choose to delete all copies of the file. The option to do that is no longer available. Is there a setting I'm missing here? Thanks.

You cannot delete items from Local backups (the white "tick marks"). See #30 in Time Machine - Frequently Asked Questions.

Time Machine does not see back-up file on Time Capsule

I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
Robert

I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
Robert

Can't find backed-up files on Time Capsule

I have a MacBook and, more recently, an iMac, both of which have been regularly backing up to a iTB Time Capsule. Then the hard drive on my MacBook, which contained all my iTunes and my photos, broke and had to be replaced. Now that I have my MacBook back with a new (but empty) hard drive, I want to restore all my old documents to it. But when I go into Time Capsule, "Documents" and "Music" are greyed out. All that I can recover are applications. Will someone please tell me that my old documents were in fact being backed up and that they can still be recovered?

tom,
Welcome to the Apple Discussions!
The following may be helpful in migrating your data back to the new hard disk.
*_Migrating User Data From One Mac to Another_*
*Wirelessly or Directly Connected?* (For AirDisk Users)
Bear in mind that for Time Machine to successfully migrate user data, the backup disk must be accessed in the same manner in which the backups were originally created. Otherwise, the backups may not be visible for migration.
In other words, if backups were performed wirelessly to a hard disk attached to an Airport device, then the restoration will need to be performed wirelessly. On the other hand, if backups were performed with the hard disk attached directly to your Mac, then the restoration will need to be performed with the hard disk connected directly to your Mac You cannot perform backups via one means and be able to access them via another means.
*Using Time Machine Before Initial Launch of New Mac*
Before starting the new Mac for the first time, attach the hard disk that contains the Time Machine backups from the old Mac.
Start the new Mac and begin the setup process. At some point it will ask you if you would like to Migrate/Import user data from another computer or a Time Machine backup disk. Follow the prompts and select the date of the backup you would like to restore your user data from. Once the migration is complete use Disk Utility to repair any permissions issues.
*Using Time Machine After Initial Launch of New Mac*
If you have already created a User Account on the new Mac using a DIFFERENT Username and Password from the old Mac, then do the following:
Attach the hard disk containing the previous Macs' Time Machine backups to the new computer.
Go to Applications --> Utilities --> and launch Migration Assistant.
At the welcome dialogue click "Continue." You may be required to enter your Admin password.
For Migration Method choose "From a Time Machine backup or other disk".
Select the hard disk containing the previous Time Machine backups. (Give Migration Assistant some time as it scans the disk for eligible data to migrate.)
Now select which User Accounts you would like to migrate over.
However, if you have already created a User Account on the new Mac using the SAME Username and Password as the old Mac, then you will need to do this:
Create a new User Admin Account on the new Mac with a completely unique name.
Now, delete the first User Account you created on the new Mac - The one that is identical to the old Mac. (Of course, backup any important files that were created using the new User Account before deleting it.)
Finally, use Migration Assistant as described above to move the old User Account data over from the Time Machine backups.
*Full Backup After Restore*
Bear in mind that in all cases Time Machine will perform a full backup after a full restore. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select your previous backup volume. You will enter Time Machine and be able to browse your previous back ups and restore files. (http://support.apple.com/kb/TS1338)
Let us know if this was helpful.
Cheers!

View backed up files in Time Capsule

how can I check that time capsule is actually backing up all my files
How do i tag folders i want backed up in Time Capsule?

mackerman wrote:
how can I check that time capsule is actually backing up all my files
See #15 in Time Machine - Frequently Asked Questions.

How to change the suffix for externally edited files?

Hi,
How can I change the suffix Lightroom adds to externally edited files?
If I want it to be "-E" instead of "-Edit" for example, or "-Mod" instead of the long and ugly "-Modifier" in french version.
That would help me to get shorter filenames.
Thank you!

Preferences>External Editing tab
Edit Externally File Naming: section
Change the Template

How to improve the speed for backing up files to time capsule via in hose wifi?

Similar Messages

Maybe you are looking for