How to improve the write performance of the database
Our application is a write intense application, maybe will write 2M/second data to the database, how to improve the performance of the database? We mainly write to 5 tables of the database.
Currently, the database get no response and the CPU is 100% used.
How to tuning this? thanks in advance.
Your post says more by what is not provided than by what is provided. The following is the minimum list of information needed to even begin to help you.
1. What hardware (server, CPU, RAM, and NIC and HBA cards if any pointing to storage).
2. Storage solution (DAS, iSCSCI, SAN, NAS). Provide manufacturer and model.
3. If RAID which implementation of RAID and on how many disks.
4. If NAS or SAN how is the read-write cache configured.
5. What version of Oracle software ... all decimal points ... for example 11.1.0.6. If you are not fully patched then patch it and try again before asking for help.
6. What, in addition to the Oracle database, is running on the server?
2MB/sec. is very little. That is equivalent to inserting 500 VARCHAR2(4000)s. If I couldn't do 500 inserts per second on my laptop I'd trade it in.
SQL> create table t (
2 testcol varchar2(4000));
Table created.
SQL> set timing on
SQL> BEGIN
2 FOR i IN 1..500 LOOP
3 INSERT INTO t SELECT RPAD('X', 3999, 'X') FROM dual;
4 END LOOP;
5 END;
6 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.07
SQL>Now what to do with the remaining 0.93 seconds. <g> And this was on a T61 Lenovo with a slow little 7500RPM drive and 4GB RAM running Oracle Database 11.2.0.1. But I will gladly repeat it using any currently supported version of the product.
Similar Messages
-
To improve the system performance of the code
Please help me to improve the system performance of the following program. its very urgent
report zsdr0125
no standard page heading
* LINE-SIZE 170 " SIR 061880
line-size 210 " SIR 061880
line-count 58
message-id zz.
** Report header ******************************************************
** Report name: Activity Costing Report
** Report id: RO-01148
** Designed/Coded. Tori Chandler. Reporting Team.
** Date: March 01, 2000.
** Original SIR: 016113
** Application Area: V - Sales & Distribution (OTC)
** Correction/Transport: D10K951579
** Description: It is normal business practice for logistics
** operations to charge business units for the activity
** incurred on their behalf. This is consistent with
** activity based costing principles between BU and
** shared resources. The activities involved are picking
** storage, shipping and receiving. The purpose of this
** report is to provide data for the first 3.
** QRB2 - 03/13/2000 - Tracy, Antoine, Christian, Tori
** History:
* 06/14/2001 SIR 032383 CTS Antoine Dailly
* A plant (WERKS) can have several Distrib points (VSTEL)
* SIGN = 032383
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 034606 D10K979189 Logistics Activity report
* Logistics Activity reports
* We added fields ship to customer and country and we also make another
* total
* QRB2 Tracy L. Obrien
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 37838 D10K982890 Select only
* material type HALB
*06/12/2002 T OBrien 38784 D10K988181
* Allow option to get material weight from Master data or
* from the delivery.
* Modified by SIR CTS Date
* Jim Harwood 42730 D10K993119 10 Oct 2002
* Description: Code amended to default the Goods Issue Date range to
* the previous month. Also amended to print out the Select Options.
* Modified by SIR CTS Date
* Jim Harwood 44381 D10K994598 18 Nov 2002
* Description: Correct date range processing. APPEND statement added
* so that record is added ot internal table S_WADAT. Also S_VKORG
* removed as it was NO DISPLAY and nothing was assigned to it. It's use
* in an SQL call may be causing the wrong optimization.
* Modified by SIR CTS Date
* Tori Chandler 45567 D10K995875 03 Jan 2003
* Description: Correct reporting of weights for non-pickable items
* when the Material Master Data radiobutton is selected. Also found
* from SIR 37838, that material type is hardcoded on the LIPS. I
* created a new select option and the person needing the report
* can control if they want only HALB or all line items. Also,
* because of this the delivery weight is obtain from header,
* changing to accumulate from LIPS to match which lines are selected
* QRB2: 1/15/2003: Eileen, Jerome and Tori
*{ INSERT D11K901833 1
* Modified by Sir CTS Date
* Sue Kastan 48712/054042 D11K901833 28 Aug, 2003
* Fix overcounting of records from LIPS
*} INSERT
* Modified by SIR CTS Date *
* Vijay Andea 061880 D11K918628 04/20/2006 *
* D11K946194 *
* Description: Enhence ZSDR0125 Activity Cost Driver Report to allow *
* Analysis by Product Groupings. *
*} INSERT
* Modified by SIR CTS Date *
* Prakash Arunachalam 091510 D11K950288 09/26/2006 *
* Description: Correct Activity Cost report - material weight *
* calculation *
* Modified by SIR CTS Date *
* Murali Krishna 301978 D50K903293 01/20/2008
* Description: Improve the system performance of this report and
* clean-up of code into various form routine
* Table declaration.
tables: likp, " SD Document: Delivery Header Data
lips, " SD document: Delivery: Item data
vepo, " SD Document: Shipping Unit Item (Content)
vekp, " SD Document: Shipping Unit Header
knvv, " Customer Master Sales Data
kna1, " General Data in Customer Master SIR 34606
marm, " Units of Measure
mara, " Material Master: General Data SIR 38784
t001l, " Stge locs
t001k, " Valuation area
tvswz, " Shipping Points per Plant
t134, " Material types
z0234. " Alternative Unit of Measure
*** Selection screen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_werks like t001l-werks obligatory memory id wrk.
select-options: s_lgort for t001l-lgort,
* S_VKORG FOR TVKO-VKORG NO-DISPLAY ," SIR 34606, 42730
* S_WADAT FOR LIKP-WADAT_IST OBLIGATORY NO-EXTENSION,
s_wadat for likp-wadat_ist no-extension, " SIR 42730
s_mtart for t134-mtart, " SIR 45567
s_lfart for likp-lfart no-display no intervals.
selection-screen skip 2.
selection-screen comment 1(21) text-002. " SIR 38784
parameters: p_delwt radiobutton group grp1, " SIR 38784
p_mstwt radiobutton group grp1. " SIR 38784
*--------------------------------------------------*Start of SIR 061880
selection-screen skip 2.
selection-screen comment 1(21) text-006.
parameters: p_voldl radiobutton group 2, " Volume from Delivery
p_volmd radiobutton group 2. " Volume from Master Data
*-----------------------------------------------------End of SIR 061880
selection-screen end of block b1.
*--------------------------------------------------*Start of SIR 061880
selection-screen begin of block b2 with frame title text-007.
select-options: s_cbuun for knvv-kvgr1 no intervals, " Customer BU
s_mbuun for mara-prdha+1(2) no intervals, " Material BU
s_lobus for mara-prdha+3(3) no intervals, " LOB
s_pac1 for mara-prdha+6(3) no intervals. " PAC1
selection-screen end of block b2.
*----------------------------------------------------*End of SIR 061880
*---Type Declaration for Internal Tables------------------------------*
types: begin of t_likp,
vbeln like likp-vbeln, " delivery
vstel like likp-vstel, " shipping point
lfart like likp-lfart, " delivery type
vkorg like likp-vkorg, " Sales organization
kunag like likp-kunag, " sold-to party
kunnr like likp-kunnr, " ship to party SIR 34606
btgew like likp-btgew, " Delivery weight
gewei like likp-gewei, " Unit of weight
anzpk like likp-anzpk, " Number of Packages SIR 61880
volum like likp-volum, " Delivery Volume SIR 61880
voleh like likp-voleh, " Volume Unit SIR 61880
vtwiv like likp-vtwiv, " Distribution channel
spaiv like likp-spaiv, " Division
wadat_ist like likp-wadat_ist, " actual goods issue date
del_flg(1) type c, "(+) SIR 301978
end of t_likp.
types: begin of t_lips,
vbeln like lips-vbeln, " delivery
posnr like lips-posnr, " delivery line
matnr like lips-matnr, " material
lgort like lips-lgort, " storage location
prodh like lips-prodh, " product hierarchy
meins like lips-meins, " base UoM
brgew like lips-brgew, " Material weight
gewei like lips-gewei, " Unit of weight
volum like lips-volum, " Material Volume SIR 61880
voleh like lips-voleh, " Volume Unit SIR 61880
lgmng like lips-lgmng, " actual delivery quantity
komkz like lips-komkz, " Indicator for picking control
mtart like lips-mtart, " Material type " SIR 37838
del_flg(1) type c, "(+) SIR 301978
end of t_lips.
types: begin of t_vepo,
venum like vepo-venum, " shipping unit number
vbeln like vepo-vbeln, " delivery
end of t_vepo.
types: begin of t_vekp,
venum like vekp-venum, " shipping unit number
brgew like vekp-brgew, " actual weight
gewei_max like vekp-gewei_max, " unit of weight
vpobjkey like vekp-vpobjkey, " key for assigned object
end of t_vekp.
types: begin of t_knvv,
kunnr like knvv-kunnr, " customer number
ktgrd like knvv-ktgrd, " acct assign group
kvgr1 like knvv-kvgr1, " customer group 1
end of t_knvv.
types: begin of t_kna1, " SIR 34606
kunnr like kna1-kunnr, " customer number " SIR 34606
land1 like kna1-land1, " contry " SIR 34606
end of t_kna1. " SIR 34606
types: begin of t_marm,
matnr like marm-matnr, " material
meinh like marm-meinh, " Alt unit of measure 032383
umrez like marm-umrez, " numerator
umren like marm-umren, " denominator
end of t_marm.
types: begin of t_mara, " SIR 38784
matnr like mara-matnr, " material " SIR 38784
prdha like mara-prdha, " Product Hierarchy " SIR 61880
brgew like lips-brgew, " gross weight " SIR 38784
gewei like mara-gewei, " Unit of weight " SIR 38784
volum like mara-volum, " Volume " SIR 61880
voleh like mara-voleh, " Volume Unit " SIR 61880
del_flg(1) type c, "(+) SIR 301978
end of t_mara. " SIR 38784
types: begin of t_tvswz,
vstel like tvswz-vstel, " shipping point
end of t_tvswz.
types: begin of t_z0234, "032383
vstel like z0234-vstel, " shipping point 032383
zpaluom like z0234-zpaluom," pallet unit of measure 032383
zcsuom like z0234-zcsuom," Case unit of measure 032383
end of t_z0234. "032383
types: begin of t_output_dt,
wadat_ist like likp-wadat_ist, " Goods issue date
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
kunnr like kna1-kunnr," ship to location SIR 34606
land1 like kna1-land1," ship to location SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_dt.
types: begin of t_output_ag,
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
land1 like kna1-land1," country SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_ag.
types: begin of t_output_gs, " SIR 34606
ktgrd like knvv-ktgrd," acct assign group " SIR 34606
bu like knvv-kvgr1," business unit " SIR 34606
d_btgew like likp-btgew," delivery weight " SIR 34606
m_brgew like lips-brgew," material weight " SIR 34606
a_brgew like vekp-brgew," actual weight " SIR 34606
num_del type i, " counter of deliv " SIR 34606
num_pallets type i, " number of pallets " SIR 34606
num_cases type i, " number of cases " SIR 34606
num_loose type i, " loose quantity " SIR 34606
num_delln type i, " counter of deliv " SIR 34606
* packages like likp-anzpk, " Number of Package " SIR 61880
packages(3) type p, " Number of Packages" SIR 61880
volume like lips-volum, " Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_gs. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Material Type
types: begin of t_mtart,
mtart like t134-mtart, " Material Type
end of t_mtart.
* Customer Business Unit.
types: begin of t_kvgr1,
kvgr1 like knvv-kvgr1, " Customer Group 1
end of t_kvgr1.
* sales Organization.
types: begin of t_lgort,
lgort like t001l-lgort, " Sales Organization
end of t_lgort.
* Begin of SIR 301978
* Header: Material Document
types: begin of t_mkpf,
vgart type mkpf-vgart,
xblnr type likp-vbeln,
end of t_mkpf.
* End of SIR 301978
*---------------------------------------------------* End of SIR 061880
*---Internal Tables---------------------------------------------------*
data: i_likp type t_likp occurs 0 with header line,
i_temp_likp type t_likp occurs 0 with header line,
v_likp type t_likp,
i_lips type t_lips occurs 0 with header line,
i_temp_lips type t_lips occurs 0 with header line,
v_lips type t_lips,
i_vepo type t_vepo occurs 0,
* V_VEPO TYPE T_VEPO,
i_vekp type t_vekp occurs 0,
v_vekp type t_vekp,
i_knvv type t_knvv occurs 0 with header line,
v_knvv type t_knvv,
i_kna1 type t_kna1 occurs 0, " SIR 34606
v_kna1 type t_kna1, " SIR 34606
i_z0234 type t_z0234 occurs 0, " 032383
v_z0234 type t_z0234, " 032383
i_z0234_uom type t_z0234 occurs 0, " 032383
v_z0234_uom type t_z0234, " 032383
i_marm type t_marm occurs 0 with header line," SIR 61880
i_marm_pallet type t_marm occurs 0 with header line,
v_marm_pallet type t_marm,
i_marm_case type t_marm occurs 0 with header line,
v_marm_case type t_marm,
*-------------------------------------------------* Begin of SIR 061880
* I_MARA TYPE T_MARA OCCURS 0, " SIR 38784
i_mara1 type t_mara occurs 0 with header line,
i_mtart type t_mtart occurs 0 with header line,
i_kvgr1 type t_kvgr1 occurs 0 with header line,
i_lgort type t_lgort occurs 0 with header line,
v_kvgr1 type t_kvgr1,
*---------------------------------------------------* End of SIR 061880
v_mara type t_mara, " SIR 38784
i_tvswz type t_tvswz occurs 0,
v_tvswz type t_tvswz, "(+) SIR 301978
i_output_dt type t_output_dt occurs 0,
v_output_dt type t_output_dt,
i_output_ag type t_output_ag occurs 0,
v_output_ag type t_output_ag,
i_output_gs type t_output_gs occurs 0, " SIR 34606
v_output_gs type t_output_gs, " SIR 34606
i_mkpf type table of t_mkpf with header line."SIR 301978
*** Data Declarations *
data: v_page(3) type c, " Page Counter
v_comp like t001k-bukrs, " zbsn0001 company code
v_title(24) type c, " zbsn0001 report title
v_rpttyp type c, " report type
v_ok type c, " control While... endwhile
v_diff_date type p, " days between selection
v_werks like t001l-werks, " plant
* v_z0234_zpaluom like z0234-zpaluom, " Pallet Unit of Measure
* v_z0234_zcsuom like z0234-zcsuom, " Case Unit of Measure
v_palwto type p decimals 6, " SIR 091510
* "like likp-btgew, " Weight after conversion
v_vekp_tabix like sy-tabix, " index on read
v_vekp_sum_brgew like vekp-brgew, " actual weight
v_pallet_qty like lips-lgmng, " calculated pallet qty
v_pallet_integer type i, " true pallet qty
v_case_qty like lips-lgmng, " calculated case qty
v_case_integer type i, " true case qty
v_qty_not_pallets like lips-lgmng, " calculated
v_num_pallets like lips-lgmng, " calculated nbr of pallets
v_num_pallets_int type i, " true nbr of pallets
v_num_cases like lips-lgmng, " calculated nbr of cases
v_num_cases_int type i, " true nbr of cases
v_total_case_qty like lips-lgmng, " case quantity
v_loose_qty type i, " calculated loose quantity
*-------------------------------------------------* Begin of SIR 061880
v_volume like lips-volum, " Volume After Convertion
v_cbuun like knvv-kvgr1, " Customer BU
v_mbuun like knvv-kvgr1, " Material BU
v_lobus(3) type c, " Line of Business
v_pac1(3) type c, " PAC1
v_flag type c. " Flag Indicator for No Data
*---------------------------------------------------* End of SIR 061880
* Begin of SIR 301978
* Ranges
ranges : r_vstel for tvswz-vstel.
* End of SIR 301978
* Constants
data: c_uom(3) type c value 'KG'. " Kilogram Unit of Meas.
data : c_vom like mara-voleh value 'M3'. " Metter Cube. " SIR 061880
constants : c_wl(2) type c value 'WL'. "(+) SIR 301978
* Initialization.
initialization.
s_lfart-sign = 'I'.
s_lfart-option = 'EQ'.
s_lfart-low = 'LF '.
append s_lfart.
s_lfart-low = 'NL '.
append s_lfart.
s_lfart-low = 'NLCC'.
append s_lfart.
s_lfart-low = 'ZLFI'.
append s_lfart.
* AT SELECTION-SCREEN.
at selection-screen.
* SIR 42730 - If no Goods Issue Date has been specified in the
* Select Options set the range to the previous month.
if s_wadat-low is initial.
s_wadat-sign = 'I'.
s_wadat-option = 'BT'.
s_wadat-high = sy-datum. " Today's date
s_wadat-high+6(2) = '01'. " First of this month
s_wadat-high = s_wadat-high - 1. " End of last month
s_wadat-low = s_wadat-high. " End of last month
s_wadat-low+6(2) = '01'. " First of last month
append s_wadat.
endif. " SIR 42730 IF S_WADAT-LOW IS INITIAL.
clear v_werks. "(+) SIR 301978
* Validate Plant/Storage Location from selection screen
select werks up to 1 rows into v_werks from t001l
where werks = p_werks and
lgort in s_lgort.
endselect.
if sy-subrc ne 0.
message e045 with text-e01.
endif.
* Validate Storage Location
if not s_lgort[] is initial.
select lgort from t001l into table i_lgort where lgort in s_lgort.
if sy-subrc ne 0.
message e045 with text-e09.
endif.
endif.
* Validate date range. do not allow more that 31 days
if not s_wadat-high is initial.
v_diff_date = s_wadat-high - s_wadat-low.
if v_diff_date >= '31'.
message e045 with text-e02.
endif.
endif.
*-------------------------------------------------* Begin of SIR 061880
* Validation for Material Type in Selection Screen
if not s_mtart[] is initial.
select mtart from t134 into table i_mtart where mtart in s_mtart.
if sy-subrc ne 0.
message e045 with text-e07.
endif.
endif.
at selection-screen on block b2.
* Validation for Material Business Unit and Customer Business Unit.
if s_cbuun-low is not initial and s_mbuun-low is not initial.
message e045 with text-e05.
endif.
* Validation for Possible combinations of Material BU, Line of Business
* and PAC1
if ( s_mbuun-low is not initial and s_lobus-low is not initial
and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_lobus-low is not initial )
or ( s_lobus-low is not initial and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_pac1-low is not initial ).
message e045 with text-e06.
endif.
* Validation for Customer Business Unit.
if not s_cbuun[] is initial.
select kvgr1 from tvv1 into table i_kvgr1 where kvgr1 in s_cbuun.
if sy-subrc ne 0.
message e045 with text-e08.
endif.
* free: i_kvgr1.
endif.
*---------------------------------------------------- End of SIR 061880
* TOP-OF-PAGE
* Top of the page routine to print the headers and columns
top-of-page.
format color col_heading on.
if v_rpttyp = 'D'.
v_title = text-h01.
else.
v_title = text-h02.
endif.
perform zbsn0001_standard_header " Standard Report Heading Form
using v_comp v_title 'U' v_page.
skip.
if v_rpttyp = 'D'.
perform write_dtlvl_headings.
else.
perform write_aglvl_headings.
endif.
* FORM WRITE_DTLVL_HEADINGS *
* for date detail level, print the column headers *
form write_dtlvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
007 text-h07, " Date
017 text-h08, " BU
021 text-h17, " ship to party 34606
030 text-h18, " country
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*----------------------------------------------------Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_dtlvl_headings.
* FORM WRITE_AGLVL_HEADINGS *
* for account group detail level, print the column headers *
form write_aglvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
017 text-h08, " BU
030 text-h18, " country SIR 34606
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*---------------------------------------------------*Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_aglvl_headings.
*-------------------------- SUBBROUTINES -----------------------------*
include zbsn0001. " Include to print all Standard Report Titles
include zsdn0004. " Print the Select Options
*** MAIN SELECTION. *
start-of-selection.
refresh: i_likp, i_temp_likp, i_lips, i_temp_lips, i_vepo,
i_vekp, i_knvv, i_marm_pallet, i_marm_case, i_tvswz,
i_output_dt, i_output_ag, i_mara1.
clear: v_likp, v_lips, v_vekp, v_knvv, v_mara,
v_marm_pallet, v_marm_case, v_output_dt, v_output_ag.
v_rpttyp = 'D'.
* SIR 42730 - Echo the Select Options to the output listing and print
* the Goods Issue Date range being used.
write: /,/. " SIR 43730 - Skip a couple of lines to centre it.
perform zsdn0004_print_select_options using sy-cprog ' '.
if s_wadat-high is initial.
write: /,/, text-003, 34 s_wadat-low.
else.
write: /,/, text-003, 34 s_wadat-low, 44 text-004, 47 s_wadat-high.
endif.
new-page.
* Main Processing. *
perform get_data.
if not i_lips[] is initial.
perform create_output.
endif.
* END-OF-SELECTION
end-of-selection.
*-------------------------------------------------* Start of SIR 061880
* PERFORM WRITE_REPORT.
if not i_output_dt[] is initial and not i_output_ag[] is initial and
not i_output_gs[] is initial.
perform write_report.
else.
skip 2.
write:/ text-e03.
skip 2.
uline.
clear: v_flag.
endif.
*---------------------------------------------------* End of SIR 061880
* FORM GET_DATA *
* build all of the internal tables needed for the report *
* selects on t001k, z0234, likp, lips, vepo, vekp, knvv & marm, mara *
form get_data.
perform get_data_t001k. " SIR 301978
perform get_data_tvswz. " SIR 301978
if sy-subrc = 0. " Build shipping point range
perform get_data_Z0234. " SIR 301978
if sy-subrc ne 0.
v_flag = 'X'.
* stop.
else.
sort i_z0234 by vstel. " 032383
endif.
* Begin of SIR 301978
* The data retrievalfrom LIKP has been modified for performance
* reasons
perform get_data_mkpf. " SIR 301978
if sy-subrc eq 0.
* Deleting data other than Goods issued for delivery
delete i_mkpf where vgart ne c_wl.
sort i_mkpf by xblnr.
endif.
* Deleting the data from the internal table i_likp by comparing
* shipping point
r_vstel-sign = 'I'.
r_vstel-option = 'EQ'.
clear : v_tvswz.
loop at i_tvswz into v_tvswz.
r_vstel-low = v_tvswz-vstel.
append r_vstel.
endloop.
if not i_mkpf[] is initial.
perform get_data_likp. " SIR 301978
endif.
if sy-subrc = 0.
delete i_likp where not lfart in s_lfart.
* End of SIR 301978
* Get data for the delivery lines
if not i_likp[] is initial.
perform get_data_lips. " SIR 301978
* Begin of SIR 301978
if i_lips[] is initial.
v_flag = 'X'.
message i089 with text-i02.
leave list-processing.
endif. " Return code for LIPS select
* End of SIR 301978
endif.
*-------------------------------------------------* Begin of SIR 061880
* Get Data From MARA (Material Master) to Read Material Weight and
* Material Voluem from Master Data.
if not i_lips[] is initial.
* Begin of SIR 301978
* Delete the duplicate material from delivery item table
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
perform get_data_mara. " SIR 301978
if sy-subrc = 0.
sort i_mara1 by matnr.
clear i_temp_lips.
refresh i_temp_lips.
* End of SIR 301978
else.
v_flag = 'X'.
message i089 with text-i01.
leave list-processing.
endif.
endif.
* Filter I_LIPS and I_MARA1 When Either material BU or Line of
* Business (LOB) or PAC1 are not left Balnk
perform filter_data_for_prdha.
* Get data for the sold-to customer
perform i_knvv_fill_data.
* Filter I_LIKP & I_LIPS & I_MARA for Cust-BU, When Cust-Bu is not
* left Blank.
perform filter_likp_lips_mara_custbu.
*---------------------------------------------------- End of SIR 061880
*-------------------------------------------------* Begin of SIR 034606
* Get data for the ship to party
i_temp_likp[] = i_likp[].
sort i_temp_likp by kunnr.
delete adjacent duplicates from i_temp_likp comparing kunnr.
perform get_data_kna1. " SIR 301978
if sy-subrc = 0.
sort i_kna1 by kunnr.
endif.
*---------------------------------------------------* End of SIR 034606
else.
v_flag = 'X'.
message i089 with text-i04.
leave list-processing.
endif. " return code to LIKP select
* endif. " SIR 061880
free: i_temp_likp.
endif. " return code for TVSWZ select
* Process table LIPS
if not i_lips[] is initial.
i_temp_lips[] = i_lips[].
sort i_temp_lips by vbeln.
delete adjacent duplicates from i_temp_lips comparing vbeln.
* Get actual weight
perform get_data_vepo. " SIR 301978
if sy-subrc = 0.
sort i_vepo by venum.
delete adjacent duplicates from i_vepo comparing venum.
perform get_data_vekp. " SIR 301978
sort i_vekp by vpobjkey.
endif.
free: i_vepo, i_temp_lips.
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
* Get Units of Measure for Material
perform read_data_from_marm. " SIR 061880
* Begin of SIR 032383
i_z0234_uom = i_z0234.
sort i_z0234_uom by zpaluom.
delete adjacent duplicates from i_z0234_uom comparing zpaluom.
* End of SIR 032383
clear i_marm_pallet. " SIR 061880
refresh i_marm_pallet. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Pallets
perform i_marm_pallet_fill.
endloop. "ENDLOOP Z0234 032383
** get alternative UoM for pallets
* SELECT MATNR " material
* MEINH " Alt unit of measure " 032383
* UMREZ " numerator
* UMREN " denominator
** into table i_marm_pallet " 032383
* APPENDING TABLE I_MARM_PALLET "032383
* FROM MARM
* FOR ALL ENTRIES IN I_TEMP_LIPS
* WHERE MATNR = I_TEMP_LIPS-MATNR AND
** meinh = v_z0234_zpaluom. " 032383
* MEINH = V_Z0234_UOM-ZPALUOM. " 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_pallet by matnr meinh.
free i_z0234_uom. "032383
i_z0234_uom = i_z0234. "032383
sort i_z0234_uom by zcsuom. "032383
delete adjacent duplicates from i_z0234_uom comparing zcsuom."32383
clear i_marm_case. " SIR 061880
refresh i_marm_case. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Cases
perform i_marm_case_fill.
endloop. "ENDLOOP Z0234 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_case by matnr meinh.
else.
v_flag = 'X'.
message i089 with text-i02.
* leave list-processing.
endif. " table LIPS is empty
endform. " get_data
* FORM CREATE_OUTPUT *
* process internal table LIPS, for each delivery/delivery lines create*
* an output record and collect into i_output internal table. Fields *
* used for header are goods issue date, acct assign, BU for customer, *
* total weight, total weight for shipping unit and count of *
* deliveries, the remaining fields will have a value of zero for the *
* collect. For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form create_output.
*-------------------------------------------------* Begin of SIR 061880
sort i_mara1 by matnr.
sort i_lips by vbeln posnr matnr.
sort i_likp by vbeln.
sort i_z0234 by vstel.
sort i_knvv by kunnr.
sort i_kna1 by kunnr.
sort i_vekp by vpobjkey.
sort i_marm_pallet by matnr meinh.
sort i_marm_case by matnr meinh.
* LOOP AT I_LIPS INTO V_LIPS.
loop at i_lips.
clear v_lips.
v_lips = i_lips.
*---------------------------------------------------* End of SIR 061880
at new vbeln.
perform collect_header_data.
endat.
if not v_lips-komkz is initial. " SIR 45567
perform collect_item_data.
endif. " SIR 45567
endloop.
endform. " create_output
* FORM COLLECT_HEADER_DATA *
* Fields used for header are goods issue date, acct assign, *
* BU for customer, total weight, total weight for shipping unit *
* and count ofdeliveries, the remaining fields will have a value of *
* zero for the collect. *
form collect_header_data.
clear: v_likp, v_knvv, v_vekp, v_vekp_sum_brgew.
v_ok = 'Y'.
read table i_likp into v_likp with key vbeln = v_lips-vbeln
binary search.
if sy-subrc = 0. " SIR 061880
clear v_z0234. "(+) SIR 301978
read table i_z0234 into v_z0234 "32383
with key vstel = v_likp-vstel "32383
binary search. "32383
read table i_knvv into v_knvv with key kunnr = v_likp-kunag
binary search.
if sy-subrc ne 0.
select single ktgrd kvgr1 into (v_knvv-ktgrd, v_knvv-kvgr1)
from knvv where kunnr = v_likp-kunag and
vkorg = v_likp-vkorg and
vtweg = '01' and " intercompany values
spart = '01'. " intercompany values
endif.
clear v_kna1. " SIR 34606
read table i_kna1 into v_kna1 " SIR 34606
with key kunnr = v_likp-kunnr " SIR 34606
binary search. " SIR 34606
read table i_vekp into v_vekp
with key vpobjkey(10) = v_likp-vbeln
binary search.
if sy-subrc = 0.
v_vekp_tabix = sy-tabix.
while v_ok = 'Y'.
if v_vekp-gewei_max ne c_uom.
perform z_unit_conversion
using v_vekp-brgew v_vekp-gewei_max c_uom v_palwto.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_palwto.
else.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_vekp-brgew.
endif.
v_vekp_tabix = v_vekp_tabix + 1.
read table i_vekp into v_vekp
index v_vekp_tabix.
if sy-subrc = 0.
if v_vekp-vpobjkey(10) ne v_likp-vbeln.
v_ok = 'N'.
endif.
else.
v_ok = 'N'.
endif.
endwhile.
endif.
endif. " SIR 061880
* populate output tables
clear: v_output_dt, v_output_ag,v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_KNVV-KVGR1.
* V_OUTPUT_AG-BU = V_KNVV-KVGR1.
* V_OUTPUT_GS-BU = V_KNVV-KVGR1. " SIR 34606
* Populate Business Unit,Line of Busness and PAC1 Values in Header Data
perform get_busunit_lobus_pac1_data1.
*---------------------------------------------------* End of SIR 061880
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
v_output_dt-a_brgew = v_vekp_sum_brgew.
v_output_ag-a_brgew = v_vekp_sum_brgew.
v_output_gs-a_brgew = v_vekp_sum_brgew. " SIR 34606
if s_mbuun[] is initial and " SIR 61880
s_lobus[] is initial and " SIR 61880
s_pac1[] is initial. " SIR 61880
v_output_dt-num_del = 1.
v_output_ag-num_del = 1.
v_output_gs-num_del = 1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Number of Packages
v_output_dt-packages = v_likp-anzpk.
v_output_ag-packages = v_likp-anzpk.
v_output_gs-packages = v_likp-anzpk.
else.
clear: v_output_dt-num_del,
v_output_ag-num_del,
v_output_gs-num_del,
v_output_dt-packages,
v_output_ag-packages,
v_output_gs-packages.
endif.
*---------------------------------------------------* End of SIR 061880
collect v_output_dt into i_output_dt.
collect v_output_ag into i_output_ag.
collect v_output_gs into i_output_gs. " SIR 34606
endform. " collect_header_data
* FORM COLLECT_ITEM_DATA *
* For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form collect_item_data.
clear: v_pallet_qty, v_pallet_integer,
v_case_qty, v_case_integer,
v_num_pallets, v_num_pallets_int,
v_num_cases, v_num_cases_int,
v_qty_not_pallets, v_total_case_qty, v_loose_qty.
read table i_marm_pallet into v_marm_pallet
with key matnr = v_lips-matnr
meinh = v_z0234-zpaluom binary search."32382
if sy-subrc = 0.
v_pallet_qty = v_marm_pallet-umrez / v_marm_pallet-umren.
* round down partial pallets
v_pallet_integer = v_pallet_qty - '.499'.
endif.
read table i_marm_case into v_marm_case
with key matnr = v_lips-matnr
meinh = v_z0234-zcsuom binary search."32382
if sy-subrc = 0.
v_case_qty = v_marm_case-umrez / v_marm_case-umren.
* round down partial cases
v_case_integer = v_case_qty - '.499'.
endif.
if v_pallet_integer > 0.
v_num_pallets = v_lips-lgmng / v_pallet_integer.
v_num_pallets_int = v_num_pallets - '.499'.
endif.
v_qty_not_pallets = v_lips-lgmng -
( v_num_pallets_int * v_pallet_integer ).
if v_case_integer > 0.
v_num_cases = v_qty_not_pallets / v_case_integer.
v_num_cases_int = v_num_cases - '.499'.
endif.
v_total_case_qty = v_num_cases_int * v_case_integer.
if v_qty_not_pallets = v_total_case_qty.
v_loose_qty = 0.
else.
v_loose_qty = 1.
endif.
* populate output tables
clear: v_output_dt, v_output_ag, v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_AG-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_GS-BU = V_LIPS-PRODH+1(2). " SIR 34606
* Populate Business Unit,Line of Business and PAC1 Values for Item Data.
perform get_busunit_lobus_pac1_data2.
if V_OUTPUT_DT-BU is initial.
clear V_OUTPUT_DT.
exit.
endif.
*---------------------------------------------------* End of SIR 061880
* get delivery weight from delivery lines instead of header " SIR 45567
if v_lips-gewei = c_uom.
v_output_dt-d_btgew = v_lips-brgew.
v_output_ag-d_btgew = v_lips-brgew.
v_output_gs-d_btgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-d_btgew = v_palwto.
v_output_ag-d_btgew = v_palwto.
v_output_gs-d_btgew = v_palwto. " SIR 34606
endif.
* Get material weight from delivery (LIPS)(IF P_DELWT = 'X')" SIR 38784
if p_delwt = 'X'. " SIR 38784
if v_lips-gewei = c_uom.
v_output_dt-m_brgew = v_lips-brgew.
v_output_ag-m_brgew = v_lips-brgew.
v_output_gs-m_brgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-m_brgew = v_palwto.
v_output_ag-m_brgew = v_palwto.
v_output_gs-m_brgew = v_palwto. " SIR 34606
endif.
else. " SIR 38784
* Get material weight from Master data (MARA) " SIR 38784
read table i_mara1 into v_mara " SIR 38784
with key matnr = v_lips-matnr " SIR 38784
binary search. " SIR 38784
if v_mara-gewei = c_uom. " SIR 38784
v_output_dt-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
else. " SIR 38784
perform z_unit_conversion " SIR 38784
using v_mara-brgew v_mara-gewei c_uom v_palwto. " SIR 38784
v_output_dt-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
endif. " SIR 38784
endif. " SIR 38784
*-------------------------------------------------* Begin of SIR 061880
* To Get the Volume Data.
perform get_volume_data.
*---------------------------------------------------* End of SIR 061880
v_output_dt-num_pallets = v_num_pallets_int.
v_output_ag-num_pallets = v_num_pallets_int.
v_output_gs-num_pallets = v_num_pallets_int. " SIR 34606
v_output_dt-num_cases = v_num_cases_int.
v_output_ag-num_cases = v_num_cases_int.
v_output_gs-num_cases = v_num_cases_int. " SIR 34606
v_output_dt-num_loose = v_loose_qty.
v_output_ag-num_loose = v_loose_qty.
v_output_gs-num_loose = v_loose_qty. " SIR 34606
*{ INSERT D11K901833 1
* Sir 054042/48712 insert code to put in 0 instead of 1 for collect
* value for delivery lines
if v_lips-lgmng = 0.
v_output_dt-num_delln = 0.
v_output_ag-num_delln = 0.
v_output_gs-num_delln = 0.
else.
* end of insert for 054042/48712
*} INSERT
v_output_dt-num_delln = 1.
v_output_ag-num_delln = 1.
v_output_gs-num_delln = 1.Since this is your first post, let me clue you in. This forum is meant for asking very short and specific questions. For example, if you've asked, how could you improve a particular one SELECT statement, I'm sure many people would have helped you.
But you cannot seriously expect someone on this forum to spend his/her time and review such a long program. For this people are normally getting paid, you know. -
How to record receipt write off for the PO receipt ?
How to record receipt write off for the PO receipt ?
You can refer this link
http://docs.oracle.com/cd/A60725_05/html/comnls/us/po/rcvacc07.htm
thanks -
How to improve query & loading performance.
Hi All,
How to improve query & loading performance.
Thanks in advance.
Rgrds
shobaHi Shoba
There are lot of things to improve the query and loading performance.
please refer oss note :557870 : Frequently asked questions on query performance
also refer to
weblogs:
/people/prakash.darji/blog/2006/01/27/query-creation-checklist
/people/prakash.darji/blog/2006/01/26/query-optimization
performance docs on query
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/064fed90-0201-0010-13ae-b16fa4dab695
This is the oss notes of FAQ on query performance
1. What kind of tools are available to monitor the overall Query Performance?
1. BW Statistics
2. BW Workload Analysis in ST03N (Use Export Mode!)
3. Content of Table RSDDSTAT
2. Do I have to do something to enable such tools?
Yes, you need to turn on the BW Statistics:
RSA1, choose Tools -> BW statistics for InfoCubes
(Choose OLAP and WHM for your relevant Cubes)
3. What kind of tools is available to analyze a specific query in detail?
1. Transaction RSRT
2. Transaction RSRTRACE
4. Do I have an overall query performance problem?
i. Use ST03N -> BW System load values to recognize the problem. Use the number given in table 'Reporting - InfoCubes:Share of total time (s)' to check if one of the columns %OLAP, %DB, %Frontend shows a high number in all Info Cubes.
ii. You need to run ST03N in expert mode to get these values
5. What can I do if the database proportion is high for all queries?
Check:
1. If the database statistic strategy is set up properly for your DB platform (above all for the BW specific tables)
2. If database parameter set up accords with SAP Notes and SAP Services (EarlyWatch)
3. If Buffers, I/O, CPU, memory on the database server are exhausted?
4. If Cube compression is used regularly
5. If Database partitioning is used (not available on all DB platforms)
6. What can I do if the OLAP proportion is high for all queries?
Check:
1. If the CPUs on the application server are exhausted
2. If the SAP R/3 memory set up is done properly (use TX ST02 to find bottlenecks)
3. If the read mode of the queries is unfavourable (RSRREPDIR, RSDDSTAT, Customizing default)
7. What can I do if the client proportion is high for all queries?
Check whether most of your clients are connected via a WAN connection and the amount of data which is transferred is rather high.
8. Where can I get specific runtime information for one query?
1. Again you can use ST03N -> BW System Load
2. Depending on the time frame you select, you get historical data or current data.
3. To get to a specific query you need to drill down using the InfoCube name
4. Use Aggregation Query to get more runtime information about a single query. Use tab All data to get to the details. (DB, OLAP, and Frontend time, plus Select/ Transferred records, plus number of cells and formats)
9. What kind of query performance problems can I recognize using ST03N
values for a specific query?
(Use Details to get the runtime segments)
1. High Database Runtime
2. High OLAP Runtime
3. High Frontend Runtime
10. What can I do if a query has a high database runtime?
1. Check if an aggregate is suitable (use All data to get values "selected records to transferred records", a high number here would be an indicator for query performance improvement using an aggregate)
2. o Check if database statistics are update to data for the Cube/Aggregate, use TX RSRV output (use database check for statistics and indexes)
3. Check if the read mode of the query is unfavourable - Recommended (H)
11. What can I do if a query has a high OLAP runtime?
1. Check if a high number of Cells transferred to the OLAP (use "All data" to get value "No. of Cells")
2. Use RSRT technical Information to check if any extra OLAP-processing is necessary (Stock Query, Exception Aggregation, Calc. before Aggregation, Virtual Char. Key Figures, Attributes in Calculated Key Figs, Time-dependent Currency Translation) together with a high number of records transferred.
3. Check if a user exit Usage is involved in the OLAP runtime?
4. Check if large hierarchies are used and the entry hierarchy level is as deep as possible. This limits the levels of the hierarchy that must be processed. Use SE16 on the inclusion tables and use the List of Value feature on the column successor and predecessor to see which entry level of the hierarchy is used.
5. Check if a proper index on the inclusion table exist
12. What can I do if a query has a high frontend runtime?
1. Check if a very high number of cells and formatting are transferred to the Frontend (use "All data" to get value "No. of Cells") which cause high network and frontend (processing) runtime.
2. Check if frontend PC are within the recommendation (RAM, CPU MHz)
3. Check if the bandwidth for WAN connection is sufficient
and the some threads:
how can i increse query performance other than creating aggregates
How to improve query performance ?
Query performance - bench marking
may be helpful
Regards
C.S.Ramesh
[email protected] -
Why is the GTX470/480 giving me the same performance as the old GTX 285?
Hello
Just love Adobe CS5 but still has some questions?
Starting this thread because I would like to know why Fermi series is not fully utilized inside Adobe?
For example, why is the GTX470/480 giving me the same performance as the old GTX 285?
Is this problem at Adobe or Nvidia or both?
Will this change in the future upcoming update from Adobe/Nvidia?
Best regards
MikaelHello my Adobe friends, I love Adobe so don't get me wrong here:-)
This is my system:
Intel i7 920
Asus P6T Deluxe V2 (X58 chipset)
Corsair 12GB (1600MHz)
Adaptec 3085 raid card with 4 x 1000GB Seagate in a raid 5
Nvidia GTX470 with the latest driver
AJA Kona LHi
C disk Intel SSD G2 with Windows 7 Ultimate 64bit with latest driver
Adobe CS5 with al the latest update inkl 5.0.2.
Just read this from dvinfo Adobe and our friend Harm Millaard, so I can not be that wrong about it?
"Currently MPE is still in it's infancy and CUDA Toolkit 3.1 has just appeared.
What does that mean?
First of all that at this moment in time there is no performance difference noticeable between a GTX-285 and a GTX-480, tested on the same system. This despite more than double the cores and double the width of the memory bus of the 480 over the 285.
At this moment the conclusion may be that the 460 is the most attractively priced MPE card with the same performance as the 480.
However, it is to be expected that when MPE get's more mature, it will use available cores more efficiently. Just like the threading on certain processes in CS5 that is far from optimal, causing much more latency in the communication between CPU - RAM - GPU - VRAM and back, especially on hexa cores.
Threading is a major factor for performance gains, both in the CPU and in the GPU. Therefore I expect that in time the 470 or 480 will be a much better choice than the 460".
Best Regards
Mikael -
How to improve af:popup performance and decrease the popup opening time?
Hi All,
I am trying to open a popup on mouse over of af:commandImageLink. Popup is opening properly but its taking quite some time for loading and opening. As I am opening af:menu component which is enclosed in af:popup on mouse over of af:commandLink I need memu to be opened immediately as soon as user places mouse over commandImageLink component.
Is there any way we can decrease the popup opening time?
Below is code snippet using for command Link and popup:
Step1:
<af:commandImageLink text="#{aaa.Data}" binding="#{navigationUtilBean.DataMenu}" icon="/images/MenuArrow_final.png"
iconPosition="trailing">
<af:showPopupBehavior popupId="::DataPopup"
triggerType="mouseOver"
align="afterStart"/>
<af:clientListener method="onMouseOver" type="mouseOver" />
</af:commandImageLink>
Step2:
<af:popup id="DataPopup" contentDelivery="immediate" animate="false" clientComponent="true"
launcherVar="source" eventContext="launcher">
<af:menu>
<af:group>
<af:commandMenuItem icon="/images/DropDownMenuArrow.png" text="#{aaa.Data}" inlineStyle="width:100px;"
action="#{navigationUtilBean.conTimeIntervalAction}"
actionListener="#{halfHSubDataSelectionBC.fetcAAHData2Accounts}"
/>
</af:group>
<af:group>
<af:commandMenuItem text="#{aaa.NON_Data}" icon="/images/DropDownMenuArrow.png"
action="#{navigationUtilBean.nonTimeIntervalAction}"
actionListener="#{nonAASubDataSelectionBC.fetchNonAADataAccounts}" />
</af:group>
</af:menu>
<af:clientListener method="popupClosedListener" type="popupClosed" />
<af:serverListener type="serverPopupClosed" method="#{navigationUtilBean.serverPopupClosedListener}" />
</af:popup>
Edited by: 940044 on Jun 12, 2012 3:04 AMHi,
Welcome to OTN.
As per the tag doc,
The "mouseOver" or "mouseHover" event types have a built in 500-millisecond launch delay that is implicitly canceled if a "mouseOut" event is triggered for the same component within the delay period.http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_showPopupBehavior.html
I don't think you can change that 500 millisecond delay.
-Arun -
How can I save/write data on the hard disc of the Real-Time System?
I would like to acquire huge size of data via LabView Real-Time System.
Since data is so huge, I am now thinking that it might be good idea to
write/save data on the hard disc of the Real-Time System first and then
transfer the data file to a data processing PC using FTP etc.
If you know how to save/write data on the hard disc of the Real-Time System
(Ver. 7.1), please let me know.
Thanks,Just to add to Aitortxo's good answer,
Since you have only one Drive ( C:\) on your RT, just keep monitering the availible disc space.
After every few set of file writes keep transferring Backups delete these files, so that you keep C:\ drive space for running your applications.
Regards -
How to measure work centre performance in the pp point and pm pinot of view
Dear Guru`s,
how to evaluate the work centre performance in the pp,pm point?
how to evaluate the OEE (overall equipment efficieny)?
can anybody suggest that, if there is any transactions are avialable to get the reports or any process is to be followed to evaluate these?.
regards,hi
you can evaluate the PM work center using t-codes
CR05 - Work Center List
CR06 - Cost Center Assignment
CR07 - Work Center Capacity
CR08 - Work Center Hierarchy
with this you can get the requirment,available and overlaod of the capacity
OEE cannot be directly calculated you can develop the custom based program to calulate the one with available input,( available hrs,down time hrs)
regards
thyagarajan -
How well does MacBook air Perform with the sims 2?
I don't know how you apple lovers did this to me but.. God, after yeas of hating Mac for no appearent reason and favoring microsoft, worshiping Bill gates someone handed me an iPhone and it was love at first touch. I'm sorry Bill I can no longer resist apple's incredible products! Time to get my first apple computer! Bottom line I love the sims 2 and wish to have a laptop that plays it easily. I've got my eyes on the latest MacBook pro, is it captable? The bigger issue is the price.. One thousand dollars is already a ton of money but amazingly I'm willing To spend just that but two thousand dollars is out of the question.. I need a MacBook of any sort that will play the sims 2 at least and a decent screen resolution.. I'm probably better off with a windows vista. Prove me wrong!
I have several other Macromedia applications - but not Air. But if the other applications are an indication, boot is going to be slow (around a minute); Air's dependence on Flash will guarantee relatively slow performance. As you know, most other applications boot in seconds.
Your best solution would be to download the free part of the programs to determine if you find the performance acceptable. -
How is the graphics performance with the HD4000 GPU forced on
How folks....
I am wondering if anyone here is running there rMBP with the HD4000 GPU forced on (using gfxCardStatus.)
I always run with the integrated GPU on my Late 2011 MBP 15 (the GPU performance is adequate for me this way with the HD3000.)
Since there are a lot more pixels to drive on the rMBP, I wonder if the scrolling, screen switching, going to mission control and back, etc. suffers when using the integrated GPU only. I wonder if anyone is willing to give this a try? This might also fix the graphics corruptions problem you guys have been seeing when coming back from sleep with the rMBP.
gfxCardStatus download link: http://codykrieger.com/gfxCardStatus (v 2.2.1 supports Mountain Lion as well as the Retina MBP.)
Regards,
KaranI've got a 1.8 with upgraded RAM and have had no problems outputting to my 720p display. Some previous posts have stated that doing 1080i with a compressed feed is the only thing that is too much and you need the new model for that.
-
Help with how to read and write files to the applets server
I am writing a form that requires some data to be written serverside(not on the host machine) and I also need to be able to read from those same files.
Can anyone provide any help?
I looked into signing but it seems, to me, that signing is for when you are going to be modifying files on the host...brianb7590 wrote:
Would I use that to refer to the file like I would with a regular application?Nope. It's pretty complicated. You've got to set something up on the server to accept requests, get all the data and then save files somewhere and on the client side you've got to make the connection and send the data.
Edited by: tjacobs01 on Apr 13, 2009 5:49 PM -
I have been using PowerPivot for a couple of months now and whilst it is extremely quick when pulling in data to populate Pivot Tables, it is extremely slow to make the following kind of changes to the Data Model:
- Add a Measure / Calculated Field
- Add a Calculated Column
- Rename a Calculated Field
- Re-name a Calculated Column
- Modify a relationship
- Change a tables properties
- Update a table
In the status bar of excel I get a very quick 'calculating', then it spends a lot of time 'reading data',
then it 'finalises' after which nothing is in the status bar but it still takes approx. 45 seconds before the program becomes responsive again. This waiting time does not change depending on the action, it is the same if I rename a
column as it is if I add a new measure.
My question is what affects performance of these actions and how do I improve it?
To give you an idea of where my data comes from, I have:
- 7 tables that feed into the Data Model directly from within the workbook which contains the data model itself. These are a combination of static tables and tables that connect to a MySQL database.
- 6 separate workbooks which contain static data that is updated manually periodically (copied and pasted from another source)
- 5 separate workbooks which contain dynamic tables that are linked to our MySQL database and update when opened.
Now I realise that this is probably where my issue is, however I have no idea how to fix it. You do not seem to be able to connect to a MySQL database directly within the PowerPivot window itself so there is no way to generate and update tables without
first creating them either in a worksheet or separate workbook (as far as I know). If I try to create all of the tables directly within the single workbook containing the Data Model I get performance and crashing issues hence why I separate tables into
individual workbooks.
Any advice on how to improve performance would be tremendously appreciated. I'm new and keen to learn, I'm aware this set-up is far from best practice.
Hardware wise I am using:
- Windows 8 64-bit
- Excel 2013 64-bit
- Intel Core i7 processor
- 6 GB Ram
Thanks,
JamesDarren,
I think the point I was making is its in memory, geez... BTW what do all applications do when they run out of paged memory, if PowerPivot is using all available memory then wouldn't this force the other applications to use Virtual or essentially write
back and forth to the disks? I think Virtual memory white to disk ??, lol Also, there are parts if the architecture of Excel 2013 that when importing data into PowerPivot require memory and when working in SharePoint the PowerPivot data is cached to disk
unless recently refreshed... But this conversation isn't help the James who asked the question and as much as I would love to continue its become a little boring..
Hi James,
If you download one the ODBC MySQL Connectors
http://dev.mysql.com/downloads/connector/odbc/ and I believe yours is the first one for x64 systems and connect directly to the data you should be able to reduce the number of workbooks your opening and if you notice in the following graphic these
connection are automatically refreshed by default, the parts in red are the differences between PowerPivot 2010 and 2013
You should notice a lot of improvement especially when refreshing data please let us know how it goes...
After registering the ODBC Driver
Click Add. on the User-DSN sheet, choose the “MySQL ODBC 5.x driver”, fill in the credentials, choose a database (from the select menu) and a data source name and you’re done.
Back in Excel you go on the PowerPivot section of the ribbon and open the PowerPivot window (the green icon on the left side). In the ‘Home’ section of that window you will see a small gray cylindrical symbol (the international
symbol for “database”) which will suggest to you different data sources to choose from. Take the one where it says “ODBC”.
In the next dialog you click on create, choose the adapter, and then Ok. Back in the assistant you can check the connection and proceed.
Now you have the choice between importing the data from tables using the import assistant or Query depends on your skillset..
Cheers,
Ivan
Ivan Sanders <a href="http://www.linkedin.com/in/iasanders">My LinkedIn </a> , <a href="http://msmvps.com/blogs/ivansanders">My Blog</a>, <a href="http://twitter.com/iasanders"> @iasanders</a>,
<a href="http://shop.oreilly.com/product/0790145372703.do">BI in SP2013</a>, <a href="http://sharepointdemobuilds.codeplex.com">SP2013 Content Packs</a>. -
How to improve ODS archiving performance ?
Hello,
We are having a huge ODS with nearby 800 millions records. We are
planning to archive this ODS as soon as possible. We've begun to
archive the ODS month by month, but as you can imagine the write/delete
(SARA) process is very slow (full table scan).
We have done a test with 7 million records to delete :
It took us :
2 hours : SARA Write process (create archive files)
12 hours : SARA Delete process (execute delete program)
Our ODS contains 45 millions records per month, we can launch the archive jobs in our production environnement only during the week end.
It will take us months
to complete our archiving scenario.
How can we improve the archiving process ?
We don't really need the data that are beyond 18 months, is there a
better way to delete those data : selective deletion ?
Thank you in advance for your answers.
Business Information Warehouse 3.0B
Message was edited by:
ramos alexandroHi,
When you are running archiving process...queries might not run or will have bad performance...even a lock can happen...so..Just a idea,
As you said..you require only...Last 18 months data for Query..
So Create/make a new Shadow ODS ZSDO0002 ..should have similar Charateristics and KF.
Then make full Load from Your ODS(which you have to archive)..with selection in Infopackage for last 18 months only.
Make a INIT.
Then Latest Delta should come to this..ODS (ZSDO0002)...not to your old ODS.
Now, Copy the Queries from your old ODS to new OLD...with RSZC
Now archive your old ODS.
Regards,
San!
If helpful assign points -
Macbook Pro 1.1 how to improve read/write speed
Hello,
I am looking to improve the read/write performance of a 2006 2.16 Intel Core Duo Macbook Pro with 2gb RAM (the max), that I use on a specific job in a specific workflow.
In the workflow there are three retouchers using three different MBPs and transferring files via Ethernet network to a fourth MBP (the one in question) which is used as a dropbox, if you like.
So the MBP in question has no applications running. Files are saved to it and opened from it and saved back to it.
How can I improve read/write speed on this MBP under these conditions?
Would installing an SSD be the answer? Or is it really a processor issue and there's nothing to be done? I figure RAM doesn't really come into it, but in any case 2GB is the max this model can accept.
Many thanks in advance.An SSD would definitely improve read/write speed. However, depending on capacity needed, are you sure you want to sink the money into this machine? Start here:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ -
How to improve Bluetooth Audio Performance in OS X?
I have a MacBook Pro 13 with retina display that is just over 1 years old; I love it! It runs OS 10.10.1.
I connected a pair of Powerbeats2 wireless headphones via bluetooth and noticed the volume at max setting was half as loud as my iPhone6+ and more so than my iPad 2.
Are there terminal settings to improve sound performance of bluetooth on the MacBook Pro? What are they?
How can I read default Bluetooth settings? As a matter of reference, I did download and update the firmware on the PowerBeats...Thank you KC, I did in fact find that page and read it. I think I understand something new now. LPX treats stereo busses as a single name. Like Bus 1 can actually be stereo if set to be so. That is what was so confusing to me, coming from the world of Digital Performer where they specifically show Bus 1-2 to mean a stereo pair. Logic Pro definitely handles several conventions differently, so I'm currently riding the learning curve!
One thing still confusing me. I've set all my tracks to output from a common bus. I've set that bus to be the input bus to a new stereo audio track. But I don't seemt o be able to control input level. No matter how much I reduce the aux or master level, the audio track still records super hot! I'm sure I'm overlooking something very obvious, but I can't think of another control other than the associated aux or the master bus levels that would control input level into an audio track... Ideas?
TIA,
Greg
Maybe you are looking for
-
Use of global currencies in configuration
Our site would only like to see their information in the local currency. We have no need for multiple global currencies. We configured the ETL with nulls in the three global currency fields, but notice that all the out of the box dashboards are going
-
Document splitting & new GL function
Dear All, I need document for document splitting & new GL function. It is urgent. My email ID is [email protected] Please help. Thanks Gov
-
We have a scenario where an external system is going to communicate with us by sending an XMl message via HTTPS. Now my question is... if we use the HTTP Adapter then what do we need to do to enable HTTPS. Do we just need to create a HTTPS port on th
-
Story iPhone appliacation updated: Version 1.2
Hi Everyone, We have updated the Story iPhone application with the latest login components. Now the latest update is available on App Store. Please go forward and update the app on your iPhones. Thanks Sonal (Adobe Story Team)
-
HT1212 How can I authorize my computer?
I cannot play music from my phone on my computer because my computer is "Not authorized" how can I fix this?