How to incerese and decerese brightness in Hp 15-r006 tu laptop?

i am unable to decerese and incerese display brightness in my hp laptop.<br>i also tried f2(to decerese), f3(to incerese) button but i doesn't works.<br>plz tell me how to do that,<br><br>Many thanks.

Hi Hardikptl121,
I understand that you would like to know how to work the screen brightness on your HP 15-r006tu Notebook PC. I will try my best to help you with this.
Here is a document for Resolving Problems with the Brightness of the Display that explains how to increase and decrease the brightness.
I hope this information helps, please let me know.
Best of luck and have a great day!
I worked on behalf of HP.

Similar Messages

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

System Preferences > Displays.
De-select "Automatically adjust brightness"

How do I make screen brighter and the sound quality better with W8 OS on my iMac through bootcamp assistant like it is with my mac os ?

How do I fix my screen brightness on my imac via W8 OS on my Imac through boot camp assistant and How do I fix the quality of the sound coming from my imac when in w8?

Alright, first off, thank you for your help so far. I really appreciate it. However, now I have a new problem that I need help with.
I did exactly what you've said to do, and it worked fine, the screen itself became brighter again, it was just too dim before and the brightness settings were all the way up, but after doing what you said to do, It's as it is when using my Apple/Mac OS. The sound coming from the computer speakers and all the other audio issues have been fixed as well. It all sounds like it should in terms of quality. It's just now that I did that, I'll shutdown my computer, or even restart it for some reason, and each and every single time I do that, It's all back to the way it was before installing anything, dim and poor audio quality. Until I install the drivers again like before.
Am I going to have to get used to that or something? Or is there an option I'm just not seeing that would make these preferences and instalations permanent until I input/imply otherwise??
Thanks in advance!!

How do you make the whites of the eyes and teeth brighter?

Would someone be able to offer advice on making the "whites" of the eyes and teeth brighter or whiter? Thanks!

There are a few videos done on this by the Kelby group. Basically, Create a levels adjustment layer, and move the right slider to the left, which would make more of the image go towards white.
Then create a mask for that adjustment layer. Use the selection tools to create a selection of the white areas of the eyes. When you are done, click on icon at the bottom of the layers panel that looks like a circle inside of a square. That will convert your selection into a mask. Make sure the adjustment level is selected before clicking the mask icon, as that tells the layers panel which layer to apply the mask to.
If for some reason the mask is backwards, the eyes are darker than the rest of the person. You can click on the mask thumbnail that was just created on the adjustment layer to make it active, then invert the mask. Invert can be found in the select menu .

Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How can I reduce the brightness of my screen?

I installed WIndows 7 on my MAC and after installing the boot camp drivers, the screen went really bright.
I reduced the brightness to the lowest setting on my keyboard, but it is still bright.
The problem is not so much on the graphics, its more on the brightness of the white background & black text.
How can I reduce the brightness?

ang188 wrote:
I reduced the brightness to the lowest setting on my keyboard, but it is still bright.
The problem is not so much on the graphics, its more on the brightness of the white background & black text.
How can I reduce the brightness?
Start menu > control panel > appearance & personalization > display > calibrate color
I would adjust the keyboard setting back to midway before calibrating, this way you have some flexibility to use that again.

How do I get the brightness icon to go away on my MacBook?

How do I get the brightness icon to go away on my MacBook?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

How to I keep my bright Blues in Indesign?

I seem to have some persistent problem in Indesign, that's damaging my ability to actually use it. I need bright, vibrant RGB colors. Everyone knows that in Photoshop, if you convert a 0,0,255 Bright Blue to CYMK, you get a greyish, dull, shell of the former color.
This is happening a lot in Indesign. Sometimes I can get the bright blue. Sometimes the blues are all converted to this ugly blue, and I can't get it back. Yesterday, I could keep the bright blue, UNLESS I imported, of all things, a .PNG file, in which case, the .PNG, and all of the blues in the file, were converted to this ugly version. It's as if sometimes Indesign arbitrarily, or when I bring in a .PNG file, says "Okay I'm converting everyting to CYMK now."
How do I get around this? How can I keep my bright blues all the time (as I would see them in RGB), expecially when I import .Png files?

Dov beat me to the punch... his advice is spot-on; the Pantone Process book is a great resource when you're in a situation where you don't have a good proofing environment (i.e. an uncalibrated monitor and/or printer), or if you're not 100% certain of where the final print will take place.
These CMYK formulations provide a good general reference to offset press conditions; the actual end-product may not match the swatchbook precisely in all cases, but you'll not only be in the ballpark but in the infield. (If your project is color-critical then your soft- and hard-proofing process needs to account for this, of course.)
Ideally you would want to calibrate your monitor using a hardware calibration device, control your lighting in your design studio and have the correct ICC profiles for the destination press or printer... but in the real world not everyone has access to some or all of these things.

Save and Protect your iPad Device: How to Save and Prolong the battery life of your new ipad

Please, as you read add more answers to this on how to prolong and save your ipad battery life. Thank you
Saving the battery life of your iPad
1.Keep Your iDevice Out of the Sun
Whatever you do, don’t leave your iPhone or iPod sitting in a hot car—heat kills batteries faster than any other factor, and your device that used to keep a charge for hours will eventually barely hold a charge, and you’ll have to pay Apple to get it replaced. The same thing holds true for any really hot environment: try and store your device in a cool place.
Reduce the Screen Brightness
If you keep the screen at maximum brightness all the time, you’re wasting a lot of battery life—and the screens these days are so bright anyway that you don’t really need to, especially at night. Head into Settings -> Brightness & Wallpaper to adjust the default level of brightness, which you can probably keep as low as 30% most of the time.
2. Make Sure the Screen Locks Quickly
Even if you’ve adjusted the screen brightness, there’s still no substitute for having it turn off quickly when you’re not using it. Head into General -> Auto-Lock to set the screen lock to happen as quickly as your device will let you. This makes a big difference if you are always picking up your phone and putting it back into your pocket without turning the display off.
3. Use Airplane Mode When You Don’t Need Internet (iPad/iPhone)
If you’re busy spending the next 8 hours playing Angry Birds, there might not be a good reason to have internet access, so you can consider using Airplane Mode, which turns off both Wi-Fi and the regular wireless radio. Of course, this will prevent phone calls if you’re on an iPhone—but if you’re busy with Angry Birds you probably don’t want the interruption anyway.
4. The more important reason to use Airplane Mode is when you’re mobile in an area with a really spotty connection—because the iPhone or iPad will try to stay connected at all times, it’s going to be constantly searching for a connection, which can drain your battery. Head into Settings and flip the Airplane Mode switch right up at the top of the screen.
Use Wi-Fi Instead of 3G if Possible
According to Apple, the iPad will get 10 hours of battery life under regular use with Wi-Fi enabled, but will only get 9 hours using 3G—the iPhone gets 6 for 3G and 10 for Wi-Fi. Of course, if you’re heavily using the Wi-Fi, you’ll still be draining the battery—the point is under similar workloads, Wi-Fi is better than 3G for battery life.
You can enable Wi-Fi under Settings -> Wi-Fi, and then pick the network you’d like to connect to.
5. Reduce or Eliminate Mail & Calendar Checking
If you’ve got a bunch of email, calendar, or contact accounts configured, and they are all being checked and downloading email on a regular basis, you’ll be draining the battery an awful lot faster than you need to.
Head into Settings -> Mail, Contacts, Calendars -> Fetch New Data and change the setting to the least frequent check possible. If you don’t use it often, you can just turn Push off entirely and then manually check when you need to.
6. Reduce or Eliminate Push Notifications
Do you really need notifications from Twitter or whatever other apps you’re running? You can turn these off one-by-one, or turn off Push entirely by heading into Settings -> Notifications, and save a bit of extra battery life since your device won’t be pulling in data for those applications anymore.
7. Reduce or Eliminate System Sounds
This one is probably a little silly, but if you really don’t care for the system sounds you can save a small amount of battery life by removing the sounds. A very, very small amount, most likely. Head into Settings -> General -> Sounds to change them.
8. Disable Location Services
If you don’t really need the location services, you can disable them to save some battery life. Head into Settings -> General and flip the Location Services setting to off.
9. Disable Bluetooth If You Don’t Need It
If you don’t use a Bluetooth headset or keyboard, you should keep the Bluetooth radio disabled to save some extra battery life. Head into Settings -> General -> Bluetooth to flip it on or off.
10. Disable Vibrate Feature in Games
If you’ve got a game that uses the vibrate feature, you can turn that off to save some battery life. This mostly matters if the game heavily uses it, and you’ll need to change the setting for the game. As a side note, and it should go without saying, if you’re running really intensive video games, they will kill your battery very quickly.
11. Charge and Discharge Your Battery Regularly
Your iDevice needs to be fully discharged and recharged at least once a month to operate at maximum efficiency and keep the battery from dying. You’ll also want to make sure that you don’t store the device with a dead battery, as that can also cause the battery to lose charge capability—when your battery dies, make sure to recharge it quickly.
<Edited by Host>
Irem Bright writes and would love your own addition if you got other helpful tips.
Thank you all.

11. Charge and Discharge Your Battery Regularly
Your iDevice needs to be fully discharged and recharged at least once a month to operate at maximum efficiency and keep the battery from dying. You’ll also want to make sure that you don’t store the device with a dead battery, as that can also cause the battery to lose charge capability—when your battery dies, make sure to recharge itquickly
The reason that Apple suggests you drain and recharge your battery once a month is not because it affects the life ofthe battery. What it actually does is calibrate the battery sensor, giving you a more accurate reading.
Other than that, you done an admirable job of summarizing the Knowledge Base article:
http://www.apple.com/batteries/ipad.html
Best of luck.

IMac 24" and adjusting brightness.

Hello. I have this fancy (and great) iMac 24". Only annoying thing is that when I try to adjust brightness, it just does not "adjust" brightness. Difference between "none" and "full" brightness is close to nothing. I have so far zap Prams, deleted prefs, turn green and shouted that I am Hulk - any ideas?
I know that there is Shade and other small apps to do this. But Brightness-control should efeect as...well... a brightness control.
Sooooo...any ideas how to get a working brightness control by keyboard?

Yeah, I have. And system preference panel.
When I press F1 or F2 to adjust brightness I have this normal response in display (picture). I dont know whats the right word for it but I mean the white brightness slash hovering on my iMacs desktop. You know, when You press volume controls there is a picture of speaker and when you press brightness there is a picture of rising sun.
Anyways, I get that. BUT THERE IS NO VISIBLE CHANGE IN BRIGHTNESS BETWEEN HIGHEST AND LOWEST.
Same thing via System preferences. Brightness slider has the same lack of adjustment.
Sooo, any ideas? Where could be the problem?

How to change the screen brightness on a macbook?

How to change the screen brightness on a macbook?
My Macbook is a May 2010 model in white
I am looking how to change the brightness using the keyboard, because I know how to change it using System Pres

The F1 and F2 keys control brightness. Depending on how you have your function keys set up, you may have to also hold down the fn key to activate.

How do you adjust the brightness on a Thunderbolt Display

How do you adjust the brightness of a Thunderbolt Display attached to an iMac ?

I had this peculiar ‘issue’ hooking up to my MacBook Retina when my Thunderbolt Display was delivered but Applecare - thanks Andrew - got me there. It seems daft!
The Thunderbolt Display Brightness slider IS there – you just have to know how to make it show up.
At initial set-up of the Thunderbolt Display [or if the Brightness slider is ever not visible in the System Preferences> Thunderbolt Display window], so long as the Thunderbolt [external] Display and the Macbook Display are ‘mirrored’ I can control the Thunderbolt [external] Display via my MacBook Retina Brightness keys [F1 & F2] – or by the Brightness slider that THEN appears in my System Preferences>Thunderbolt Display window. Once set up the Thunderbolt Display System Preferences Window continues to show the Brightness slider but I occasionally lose it if my MacBook has been disconnected from the Thunderbolt Display for some time – and I then have to start over.
So:-
Apple menu >
System Preferences>
Displays>
Click Arrangement [at the top]
Click Mirror Displays [at the lower left]
That then gives me-at-least a Brightness slider on the System Preferences> Thunderbolt Display window [as well as on the Built In Retina Display window] and I can then adjust them independently.
Oddly, having set this up just once the Brightness slider then remains on my Thurnderbolt Display and I can control it [and my MacBook Retina Display independently]. Occasionally I lose it again and have to start over.
Hope this works for others.

The screen has suddenly dimmed, how do i get it bright again?

the screen my iphone 3gs has suddenly gone dim, how do i get it bright again?

If you can see anything on the screen , go to Settings > Brightness and turn it up. If that doesn't work, press and hold both the Home and Power buttons until the phone restarts.

How to convert and edit HD video

Because of the widely using of HD Camcorder, now it is really convenient to record family parties and other things you are interested in. Nowadays, people would like to share their things with the rest of the world through Internet, such as youtube.com and other video websites.
This guide aims to show you how to convert and edit the video you recorded using your HD camcorder
What you need is a powerful HD Converter.
Step 1: Load Video
Click “Add File” to load the video that you want to convert.
Step 2: Choose Your Output Profile and Settings.
From “Profile” drop-down list you can choose your output profile according to your need.
You can also click “setteing”adjust the settings of your output video, such as “video/audio encoder”, “Video/audio Bitrate”, “Channels”, “Resolution” and so on..
Step 3: Video Editing.
This powerful MTS Converter allows you to do many video editings.
1. Click "Effect". to make special effect for your movie.
You can adjust the “Brightness”, “Contrast”, “Saturation” and also you can use “deinterlacing” to improve you output effect.
2. Trim: .
“Trim” function allows you to pick up any part of your video to convert. You can just convert a part of your video that you want.
3: Crop: .
Cut off the black edges of the original movie video and watch in full screen on your iPod using the "Crop" function.
Step 4: Conversion.
After you have done all the steps above you can click “Start” button to start your conversion.
Here I also recommend you some High Definition video converter, MTS Converter, M2TS Converter.
Hulu Downloader
Total Video Converter
Best DVD Ripper

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Has anyone experienced the on/off touch button and the brightness touch buttons failing on a 30" cinema screen?

I have a 30" cinema display which is about 3 years old. Everything was working fine yesterday but on reboot today the screen went dim and the brightness buttons did not work. I used the key board and increased the brightness but it went dim again on release. The on/off touch button also did not work.
I have set to disable both of these in the preferences and all is working now but I wondered if anyone else has experience of both of these touch buttons failing. The monitor has been switched off when booting up on a morning but I had not switched it off manually before shut down or set it to do so which I thought was odd. Now I wonder if it was the first signs of a breakdown of the switches on the monitor.
Thanks for any imput in advance.
sas44

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to incerese and decerese brightness in Hp 15-r006 tu laptop?

Similar Messages

Maybe you are looking for