How to include a message with photo in Win Live and LR4

I have Win 7 - 64 bit, Win Live Mail and LR 4. I can attach the photos and send the email successfully but cannot include a message. It puts my message into a HTML Doc next to the photos. How can I access the body of the email to write my message?

Open the photo, assuming it is in Photos, and then in the lower left corner under the photo is a box with an up-pointing arrow. Tap that box, and then the photo will have a blue circle with a checkmark in its lower right corner and the word Next at the upper right. Tap Next, then choose how you want to send the photo, by text message, email, and so on. Simply address the method you have chosen and put in any text you want to include.

Similar Messages

How can I start anew with Photos and clear the (minimal) stuff it has uploaded

I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>

How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

How do I process messages with status = "Holding"

Hi,
How do I process messages with status = "Holding" from the RWB-Message Monitoring - Adapter Engine?
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
I tried to cancel the one with the smallest sequential number, but I got the error - "Unable to cancel 1 of 1 messages; update the status"
Please help.
Thanks
Sudheer

Hi,
"Holding comes into play when ur scenario is having multiple inbound interfaces and you checked "Maintained order at runtime"in interface determination in ID. Suppose message will hit first inbound interface once it is successful then it will hit second inbound interface. If first inbound interface fails then most of the message will be in "Holding" status depends upon XI AF queues ID.
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
You will not find bcoz of AE archiving settings.
Try to check the with business guys, whether they need the order of processing. If not the case try to Uncheck the box "Maintain Order at runtime".
Regards,
Rao.Mallikarjuna

How to include another msi with LV application builder?

I can use LV application builder to create an installer for my application. But my application relies on a 3rd part msi, which should be run after my application is installed. So how to include this msi with LV app builder? Thanks in advance.

I would recommend executing a batch file that launches your other installers after your LabVIEW executable finishes installing. The process of doing this (in addition to other suggestions about including 3rd party installers) can be found in the Knowledgebase linked here.
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments

Can't send message with photo

Can't send message with photo.

Does this relate in any way to the three other threads you have going?

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto?

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks

To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

How to share a project with a non-Adobe user and present it to prospect customers?

I Have to share my project with a person who will present it to prospect customers. I cannot ask this person to open an Adobe account. Is there a way for him to access my DPS folio and show it? Or can I export it in a way that allows to appreciate the interaction features built inside?
Thanks!

OK, got it. Thank you!
2015-01-17 14:46 GMT+01:00 Bob Levine <[email protected]>:
How to share a project with a non-Adobe user and present it to
prospect customers? created by Bob Levine
<https://forums.adobe.com/people/BobLevine> in Digital Publishing Suite
- View the full discussion
<https://forums.adobe.com/message/7105349#7105349>

I am using elements & premiere 12 on my PC using windows 7. My problem is that photos in portrait view in slideshow are OK but when I move the slideshow to premiere to edit included video the portrait photos turn side-on and stretch when still in portrai

I am using elements & premiere 12 on my PC using windows 7. My problem is that photos in portrait view in slideshow are OK but when I move the slideshow to premiere to edit included video the portrait photos turn side-on and stretch when still in portrait view. Is there any way to prevent this from happening? Any comments would be appreciated.

Bruce369
What is the Output option that you are selecting for the transfer of the Elements Organizer 12/12.1 slideshow to Premiere Elements 12/12.1 Editor?
If you are using Edit with Premiere Elements output option, are you using the Premiere Elements command to break apart the Elements Organizer slideshow and then applying rotation to the portrait files? Or, it is this more than just a photo rotation matter?
More on this in the morning.
Please review and consider.
Thank you.
ATR

I'm out of space on my hard drive. How do I move move entire photo albums from iphoto and save them to an external drive to free up space?

I'm out of space on my hard drive. How do I move move entire photo albums from iphoto and save them to an external drive to free up space?

You do not move the albums - you move the entire iphoto library intake as a single entity
Make sure your external drive is formatted Ma OS extended (journaled) - then
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

I am a Canadian staying in England for a few weeks. How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada.

I am a Canadian staying in England for a few weeks. How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada and then sent to my Canadian address..

in the iPhoto preferences change the print products country to the UK and give it a try - there may be some restirctions on billing but it has worked for some people
LN

HT1430 I was given an ipad 2. How do I reconfigure it with my own settings, etc. and erase the previous owners informations?

I was given an ipad 2. How do I reconfigure it with my own settings, etc. and erase the previous owners informations?

But note, if the previous owner turned on Find My in iCloud and has not turned that off you will not be able to do anything with that iPad without the previous owner's Apple ID...there is an Activation Lock as part of iOS 7.0.4 that cannot be bypassed so you have to have that Apple ID and password if it has been turned on.

HT5622 I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

How do I suppress messages/loading bars from Import-Module and Import-PSSession?

Hello,
How do I suppress messages/loading bars from Import-Module and Import-PSSession?
I am writing a script that will be using these commands and it makes the script look clunky/scary to novice users.
Thank you for your time.

Sorry to bring this back up, but it seems that the ProgressPreference worked for Exchange, but it didn't affect the Active Directory progress bar. Any ideas why?
Strange, this worked just fine for me (no module loading indication):
PS C:\Users\mike.admin> $ProgressPreference = 'SilentlyContinue'
PS C:\Users\mike.admin> Get-ADUser mike.admin | Select Name
Name
mike.admin
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)
I do run the Import-Module command inside a function, but I doubt that would do it because I assume the preference is set scriptwide.
This will work anywhere.
$global:ProgressPreference='SilentlyContinue'
¯\_(ツ)_/¯

How to send a message with a photo to a company?

I AM S DISABLED SENIOR WITH SHORT-TERM MEMORY. PLEASE TELL ME HOW TO SEND A MESSAGE AND INCLUDE A PHOTO I HAVE ON MY i-PHONE 5S?
THANK YOU IN ADVANCE FOR THE ASSISTANCE.
FLIGHTLEADER-1

Open the photo, assuming it is in Photos, and then in the lower left corner under the photo is a box with an up-pointing arrow. Tap that box, and then the photo will have a blue circle with a checkmark in its lower right corner and the word Next at the upper right. Tap Next, then choose how you want to send the photo, by text message, email, and so on. Simply address the method you have chosen and put in any text you want to include.

How to include header files with different extensions

Hi,
When i include a header file with extension .ch (myincludefile.ch), the compiler gives error messages but when i change the extension to .h, the problem disappears.
Can anyone help me getting rid of this problem?
For example, for the line below, I get a warning such as, "attempt to redefine MY_CONST without #undef". Remember when i change the extension to .h, the problem disappears.
#define MY_CONST 500 /* Constant */
Thank you very much

I don't see how the name of the file could cause or prevent error messages, except when template declarations are involved. So let's assume for now that the file has a template declaration.
The Templates chapter of the C++ Users Guide explains about including or separating template declarations and their definitions.
If you have only a template declaration in a file and the compiler needs the definition, it will look for another file with the same base name and include it automatically. For example, if you have files foo.h and foo.cc, and foo.h has a template declaration, the compiler will include foo.cc automatically, even if you didn't intend for that to happen. You can wind up with multiple delcaration errors that way.
When looking for a file containing template definitions, the compile will not include a .h file, so as not to create recursive inclusion. If changing the file name to .h causes your problem to disappear, it seems like an unwanted automatic inclusion is the problem.
You can try two things to find out:
1. Compile with the -H option. The compiler will output an indented list of all included files. See if you are getting a file you didn't intend, or the same file twice.
2. Compile with option -template=no%extdef. It disables the automatic search for template definitions.
If you find an unintended included file this way, you will probably have to change the names or organizaiton of some of the files. Our implementation of the C++ standard library depends on NOT using the -template=no%extdef option, which might mean you can't use that option.

How to include a message with photo in Win Live and LR4

Similar Messages

Maybe you are looking for