How to include a new Z Partner Function in Sales order header drop down lis

Hello SAP experts,
We have come up with a new requirement to include a custom Partner Function-ZI in dropdown of SO header-Partners field.
Current scenario- Presently we are maintaining this partner function ( Say ZI- Institute ) in customer master data-Sales area tab.There could be more than one partners under this PF in master data. While entering sales Order, all partners associated are displayed in Header- partners tab, where only SP, SH, BP, PY partner functions are displayed.
Requirement- 1. Is to provide Drop down of this ZI-Institute partner function (which I did not find presently) in SO header-partners field and user should be able to provide one of partner function as available in Customer master ( as there are more than one partners that can be set in Customer master data but user need to be able to provide ONE of this ZI partner fucntion in DROPDOWN of PF tab in SO header ).
2. In addition, How can I link this new partner function in related sales reports against that particulat order and invoice?
Kindly suggest your valuable inputs as what should be the procedure to get this.
Many thanks in advance.

Hi,
Go to partner determination by VOPA
OR
IMG >> SD >> Basic function >> Set up partner functions >> set up partner function for sales document header
click on partner function and Maintain partner function ZI and back
Then select your existing partner determination procedure (Standard is TA) and click on PARTNER FUNCTIONS IN PROCEDURE and add partner function. and make it mandatory so even user forget to mention then at the time of saving system can remind user
Then double click on PARTNER DETERMINATION PROCEDURE ASSIGNMENT
Assign partner procedure to sales document
Now when you creating sales order go to header partner tab and enter you institute partner number
For sales order and invoice report
Execute this report by selecting partner function ZI in VA05N and VF05 respectively
kapil

Similar Messages

Multiple bill to partner function in sales order

How can a partner function be setup that it can appear more than once in a sales order ?
Need to make a sales orders with more than one "bill to partner". When I add the same partner function with another customer in the header of the sales order I get error message VPD012 : "partner function ZX can only occur 1 times in procedure ZEXP (sales document header) .
I searched OSS, and debugged for a while to try to find where that "1" is coming from.
In function SD_PCHECK_PARVW_COUNT_OK, a counter is set to "1" based on the field TPAER-PAREI (line 86). Allthough the flag "unique" is not set in partner function ZX, I get this error.
Some further in the function, there is the comment :
102 * currently uniqueness of a partner is mandatory in sales docs, so
103 * if no CAS-Doc, partner has to be unique if not AA or AW
Perhaps, in sales orders it is not at all possible to use multiple partners with the same partner function in sales orders ?
Anyone having experience with this ?
Thanks,

Hi Dries,
Even after you created your order you can maintain different bill to party.
Go to VA02 screen
Enter your order number.Enter.
Goto item details Partners tab:
Now all the details are in editable mode.enter your bill to party.Make sure your bill to party is in same sales area and company code as of sold to party.After entering the taxes will be redetermined message will come.
Enter.
Save.
Now You do the same for all other items.
Regards,
Mohan.

Need a user exit to add custom partner function in sales order @ item level

Hi,
Need a user exit to add custom partner function in sales order at item level. Goto --> Item --> Partner.
Thanks,
Thiyagi

HI Leo
To add a condition price for a condition type, this has to be assigned in the pricing procedure. For each condition type in a pricing procedure, we will have access sequences. If we follow this approch, the price is automatically extracted basing on the access sequences when condition records are maintained. For this, no coding is required and everything can be done by configuration by Functional consultant.
Naren is right to point out on the same.
If you need to change the price for a particular condition which already exists, you can go by pricing routines. Go through transaction VOFM for the same.
I advice you to discuss with your functional consultant and understand the requirement and then go for modifying accordingly.
Kind Regards
Eswar

To change/update/delete partner function in Sales order before saving it...

Hi! All,
I am having a unique requirement to change the partner function( BIll to party and Ship to party) for standard sales order in the order save badi implemtation.
Please sugest a FM that will be appropriate for this functionality.
One more thing that i am able to do is that i am able to add one more BIll to party and Ship to party in the order but I am not able to delete the exsisting Bill to and ship to partner function from that order, SO if there is any Fm that will delete the exsisting ship to and bill to party my purpose would be solved.
Please provide your suggetionas how can I proceed further.
Thanks and regards,
Mayank

Hi,
use the CRM_ORDER_MAINTAIN FM for changing the partners. Fill in the IT_PARNTER and the CT_INPUT_FIELDS parameters.
For how to fill in I advise you set a breakpoint in this FM and do a partner change in the Sales Order Document.
You can also find a lot of threads in the forums regarding the ORDER_MAINTAIN FM.
BR,
Erika

Making Mandatory of Partner functions in Sales Order

Hi All,
My requirement is as follows:
While creating configenment Issue with ref to Fillup, In Sales Order Header(Issue) Bank Partner function should be mandatory.
For that I have tried:
In Partner function i have made the Partner as mandatory( I have ticked on Check box(M)).But still it is solving the purpose.In fact in the Bank Partner customer Number is getting copied.
Please advice for the same
Regards,
Vinay

Hi Vinay,
If you set field "Mandatory function" in partner determination procedure for bank Partner function,
then the document is incomplete when the partner is missing.
However, bank partner function couldn't be the only one mandatory function, because sold-to, ship-to, bill-to and payer are also mandatory according to standard design. Please refer to note 381062.
Regards,
Smile

How to get access to the partner Functions of a PO header in BADI

Hi All,
I have a scenario where I need to get access to the PO Header Partner Functions to get the Vendor number, in the PROCESS_ITEM method of BADI ME_PROCESS_PO_CUST. I could not find any method to get the partner functions. Is there any way I can get this data in my BADI implementation. I'm talking about ME21n transaction code, and the PO is not created yet, hence the PO number is not available in the BADI.
If the above is not possible, is there any other function module which I can call in the PROCESS_ITEM method of the BADI to get partner functions and their respective vendor numbers.
Any pointers would be appreciated and points awarded. Thanks for your time and help.

Hello,
Use the methods of the class: CL_PO_ITEM_HANDLE_MM, in the method: PROCESS_ITEM of the badi:
ME_PROCESS_PO_CUST, for example to access the po lines. the code is as follows:
data: it_mepoitem type mepoitem.
**Get the po lines.
it_mepoitem = im_item->get_data( ).
To look at the methods available: Go to SE24, Input the class:
CL_PO_ITEM_HANDLE_MM
Hope this helps.
PS: Award points if my answer is helpful.
Rajeev

Can we view SH's partner functions in Sales Order?

Hi All,
SP has a different SH and FA is assigned to SH in master record. When we create order we can see all the partner functions of SP but we can't see partner functions of SH. User wants to see which FA is assigned to SH. We can only view partner functions of SH in delivery document. Is it possible to view partner functions of SH in sales order as well? Please suggest the ways to configure this setting.
Thanks!!

Hi,
Yes, you can view . Check the Partner determination procedure, include the partner function SH to your partner determination procedure assigned for your sales order.
Regards,
Murali

Mandatory partner function at sales order item level

Hi all,
I'm customizing partner schema at item level for sales order. I have created a custom partner function, I put it in a new sales order item partner procedure and i set this partner function as mandatory (I want that system show me a message if this function is missing at item level in sales order). This partner function is defined only at sales order item level (not at header level or customer master).
If i create and save a sales order with an item type that use the item partner procedure I have created, system don't show me any message for the item custom partner function missing, else if it is set as mandatory in sales order item partner procedure.
I have read some posts in these forums about this functionality, but it seems a different situation.
Someone had a similar type of problem?
Thank you in advance for any possible suggestion.
Regards
Gianpaolo

Hi,
First you have to create a new partner function.
Then assign that partner function to the account group.
Then assign that partner function to partner determination procedure for the item category.
Over here click on the mandatory button also.
Then assign that partner determination procedure to item category.
Then to XD02 and give your customer number and in the partner tab maintain the data for that partner function.
Now go to VA01 and create your sales order you will see you partner function.
If you wont have maintained it in the customer master then it will prompt an error.
Regards
Raj.

Copy partner function from sales order to WBS element

Hello
Does someone know if it is possible to copy the partner function and its assignment from the sales order to the WBS element?
In our project, we create sales order with article having a strategy group (85) view MRP3. Thanks to that a network and a WBS element is created in background based on template. In the template a partner determination procedure is maintained => partner tab in the WBS element is displayed (CJ20N) but the partners maintained in the sales order are not populated.
Is something missing in the customizing?
Is it possible to do it in standard?
Kind regards
Chris

Hello Tison.
I guess you have the Project created with a BAPI in your system in background. As far as I have seen I'd try the following in ABAP to create Partners in the Project Definition: BAPI_BUS2001_PARTNER_CREATE_M or the corresponding method ProjectDefinitionPI.PartnerCreateMultiple. This should happen in background when the Project is created also.
Best regards.
Jens Schmid

Issue while uploading Partner Function in Sales Order through LSMW

Dear All,
I have to make change some partner function at item level in existing sales order. I have created the LSMW for changing the partner function at item level. But while recording the system field (Field Name ) will maintained as beow:
GVS_TC_DATA-REC-PARTNER(08)
GVS_TC_DATA-REC-PARTNER(09)
It will run successully when at line item the Partners which i have to change are availble at 08 & 09 level. But in some cases the partners are available on differnet position, in that case my LSMW will not work.
Is there any solution for the same.
Thanks in advance.
PM
Edited by: PM on Mar 7, 2012 6:47 AM

Hi,
This is the most common drawback while using LSMW. The position should be the same for all records to update the partner function. Else, think of of writing a BDC or manually updating it.
Regards,
Raghav

Changing the Ship-to partner details in Sales order header through exit

Hi all,
I have a requirement where in during the process of the sales order creation, based on certain
criteria, the details in the ship-to partner would have to be modified.
These details like the Name, Street, etc would be maintained in a local table and based on the criteria,
the appropriate record from this table would be fetched and updated to the ship-to partner.
I was trying to implement this in the MV45AFZZ user exit. However, I was not able to update this through the exit.
Would I have to somehow update the ADRC table directly through this exit or is there any better method.
Please suggest.
Regards,
Sudeep

Hi,
If you could not find Street in this Routine call the BAPI BAPI_BUPA_ADDRESS_CHANGE to update Street and required details ..
Thanks and regards,
Sree.

Partner Roles In Sales Order Header

Hi Experts,
I am developing a Module Pool Program for Following reason.
People having not authoruzation to VA02 can change certain fields / Parameters in Partners and Additional Data B tab .
my developments should work similar to standard transaction ( VA02 ) .
Please help me to do the followings :
I have all Partner Information. I want to know how to make this work like Standard Transaction ( VA02) . There Certain Partners Functions and Partners are Disabled / Enabled.
for ex Sold to party and Partners are disabled
Ship to party is disabled and its partners are enabled like that..
I tried using table TPAER with PAPFL and AENDB still its not working . And also tell me how to switch contents when we change Display Ranges in Partners.
Is there any Function Module from where we can get this information ? Please help me to solve this problem.
Thanks,
Shrikanth

http://abap.wikiprog.com/wiki/BAPI_SALESORDER_CHANGE

How to make pricing field as output only in sales order header and item lev

Hi ,
I want to make the field PRICING DATE as output only both at header and item level. How can i do pls guide me in detail.
Regards
Sunaina

Hi Sunaina ,
Through User Exit you get this requirement plese take help of ABAPer to activate the user exit according to your requirement.
Try With this User Exit
Program MV45AFZZ
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
I hope it will help you,
Regards,
Murali.

Partner at sales order header

I have a requirement where a partner function is needed at sales order header level where sales order handler can assign any value. the partner function should allow any free value to be entered without any need to actually define a master record for the value to be entered in the partner function at sales order header level.
Please guide how can a new partner function be defined with this facility. Thanks !

Hi
Goto SPRO>SD>Basic functions>Partner determination>sales docuemnt header.
Define a new partner function.
Assign it to your partner determination procedure.
Don't make it as mandatory.
Assign that partner procedure to your sales order type.
now test it.
try and revert

Partner function for sales contract

Hi
I have to extract Sales related data from SAP R/3 to BW.
Facing issue if someone just changes partner function for Sales contract as they are not captured in any of the standard extractors.
If there is change in partner function for Sales order then it gets captured in 11 vascl but if its for contract then it doesnt get capture.
Any solution ?
Regards,
monika

Hi ! Ivy
I guess there is a option.
Try this out. Use the menu path IMG> Sales & Distribution> Sales> Lists> Set updating of partner index
In the resulting screen, click on 'New Entries' make entries 0 - for sales orders and 4 - for contracts as transaction group. Under the column 'partner function' ener the partner function for which you want the report and save your entries.
Now when you go for executing your report, click on the push button 'Partner functions' ( Say in VA05) , you will have the option for selecting the new partner functions , select and execute your report.
Provide your feedback.
Regards,
PATHIK

How to include a new Z Partner Function in Sales order header drop down lis

Similar Messages

Maybe you are looking for