How to include a system for a configured Domain

Hi,
Pls suggest how to include a preproduction system into a Development-->Production System Configuration in TMS.
I have configured already as Development-->productions configuration settings and make production as Domain Controller.
Now i want to include a pre-production system, How to modify the TMS/
Pls suggest.
Regards,
Saravanan.

Hi Sarvan,
1) Login to Transport Domian Controller ( 000 Client with Admin User)
2) Go to Overview/Transport Routes
3) Configuration/Standard Config/Three systems in a Group.
4) Specify the Diff systems.
5) Add the Transport Routes for this landscape
6) Distribute and activate the Configuration.
Regards
Umesh

Similar Messages

How to include virtual system in transport domain

Hi all,
I have my development and quality servers running on one instance.at the time of configuring STMS,i have made the transport domain and included both the systems.Also i have configured production system as the virtual system.Now i have installed the production system on a different host with a different transport directory and want to include this system in the transort domain.in a way the virtual system will be replaced.
How should i do it.
Regards
Praveen

Hi Praveen,
If you want to include a system in your existing transport domain, just login into the system, in T-code STMS you will get a POP UP choose other configuration ,it will ask for-:
System
Description
Target Host
System Number
Save the settings and wait for some time it will automatically added in your Transport Domain.
Reward Points if find it useful.
Thanks,
Prashant.

How do the change management for the configuration of the adapters

Hi all.
How do the change management for the configuration of the adapters, when i transport the software version component from an development system to production system.
For example, for to change the url parameters of adapters soap inside the production system. I will need type, the news values in this system?
Thanks
Best Regards.

There is an option to pass all the paramters except those who changes from
system to system.
for example,
if you are reading from a file from the directory: <SYS>\CREMAS_<TS>.XML
when <SYS> is DEV or QAS or PROD, and <TS> is time stamp,
you can create channel template that read file with file pattern CREMAS_*.XML,
this can save you a lot of work, however, parameters that are diffrent in every system, (in this case the directory DEV,QAS,PROD) you must enter manually in every system.

Not able to include the system to its transport domain

Hello,
We are not able to include the system to its transport domain. We are getting the same error:
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Date and Time          01.10.2010 11:27:35
Please advice
Sankar

Hi Shyam,
This is actually a program error and the same can be rectified by implementing the [SAP NOTE 1412609 - DUPREQ when configuring the transport domain|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1412609] using the tcode SNOTE.
This will resolve ur issue.
Regards,
Varadharajan M

How to design a system for a bank?

The company I work for is about to design a system for a bank. This system will be used by office clerks to help their daily works. For example they can handle bank accounts, credit cards, credit products, loans, client data, stuffs like this. It's a kind of accountant system.
As I don't want to reinvent the wheel I'm sure there are several solutions for this problem. Patterns, case studies, books, real life stories. I'm looking for them.
Would you be so kind to recommend something I can use?

I don't know how big a company you're talking about.
I'd look into ERP systems like SAP,
Oracle/PeopleSoft, Great Plains, etc.The task is to implement a system with which we can help the for of the office clerks. So we don't have to implement a whole accountancy system from the beginning to the end we just have to implement some kind of frontend and services for the frontend. These services will be used by the frontend and will be connected to the accountancy system of the company ( legacy app written in Cobol ).
So I need some books, strategies, etc on how to implement, architect a tipical banking app. E.g. What does account (, banking products, loans ) really mean? What kind of tipical patterns should I use?
I've browsed the web, of course, and I have found "Enterprise Integration Patterns: Designing, Building, and Deploying Messaging Solutions" for example but I'm not sure this is the thing I need. I've found Martin Fowler: Analysis patterns ( closer to what I need, so I've bought it already ). For example that one has a lots of patterns I should use ( Account, Transaction, Accounting Practice ).
So I'm looking for something similar to the book "Analysis patterns" but with more with strategies and practical information on design and architectures as well.

How to implement Help System for an exit Web application

I want to know detail steps to use OHW create a Help System for an exit ADF web application.
I read a lot doc about Oracle Help.
I down load the demo bundle and test it. It seems working. But it need to start separately. Also I do not know how to use it to build a help system for an exit ADF web application.
Any body can help me to learn HOW with jdeveloper step by step.
Thanks.

Frank,
Thanks for your reply.
I checked the site that you mentioned.
I try the sample “demo with bundle. The sample worked.
But it needed to start separately with the application.
I do not know how to build a help system with the existed web application developed with Jdeveloper (It has two projects: model and user-view-control. It is deployed on Oracle Application server).
Could you help me step by step to build the help system?

How Forecast Release and Consumption for Variant Configuration

Hi experts,
we are planning in our project how to Forecast Release and Consumption for Variant Configuration
can you explain me
Regards,
babu

Hi Sivaramakrishna,
We tried the same but what is complicating is having "market" attribute of customer in R/3 and planning forecast in DP at the "market" level. There is no customer as such in DP. THere is only market. We could release forecast at market leve using "consumption group". But I am trying to figure out how to have the sales orders consume forecast at the location, product and market level in SNP.
Today we have our sales orders to consume forecast in SNP at location-product level. we are trying to take this to "location-product-market" level in SNP.
I think we need to use some settings for characteristic based or variable consumption I think...but not clear.
Any help is appreciated.
Thanks for taking time to reply.

How to create Logical System for ALE?

Hi All,
I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing". Help with proper documentation.
Thanks in Advance.

Hi,
what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
Here i am giving link go through that and do practice,
http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Reward if it useful
lakshmi.

How to recover the system for Satellite L750-A010?

What is the possibility of recovery system for retrieval device L750-a010?

In users manuals you can find detailed description about recovering and recovery media creation.
Users manual document is preinstalled on every new notebook and you can find it under start > all programs > Toshiba > users manual.
Of course easiest way to install recovery image is to use HDD recovery option as suggested by Randy.
Check also follow Toshiba document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

How would I request skype for two sip domains and one edge

I have a could logistic questions.
scenario:
1 edge server : lync-edge-access.domain1.com (fqdn of access server)
2 sip domains: domain1.com and domain2.com
public certificate with SN: lync-edge-access.domain1.com as well as all of the SAN's including sip.domain1.com and sip.domain2.com
3 A records with the same IP: sip.domain1.com, sip.domain2.com, lync-edge-access.domain1.com.
2 srv records pointing to sip.domain1.com and sip.domain2.com on port 5061. (since they have the same IP as lync-edge-access.domain1.com and that servers certificate has names for all of them I figure this is a correct method to set them up.
My first question was when I requested my federation with Skype via Microsoft with my license agreement number it asked me for the fqdn of my access edge server. I figured this would be lync-edge-access.domain1.com. It then asked me for my sip domains and
I added two, domain1.com and domain2.com. Did I do this correctly or should I have put in two requests, one for fqdn of sip.domain1.com and sip domain of domain1.com and one for sip.domain2.com and domain domain2.com. Or should I change my srv records to both
point to lync-edge-access.domain1.com?
Currently when I am looking for contacts in Skype I cant find my accounts and vice versa if I add an account in lync for Skype it just reports offline. so I figure I did something wrong with my logic above. I can easily request an update but I want to make
sure I get it right this time.
Thanks
Loren
Loren Hudson

Hi Loren
As far as I know, you could add one or more SIP domain names at the same time.
To initiate the provisioning process for Lync-Skype connectivity:
1.Sign in to the website, https://pic.lync.com, using your Microsoft Windows Live ID.
2.Select the Microsoft licensing agreement type.
3.Select the check box, verifying that you have read and accept the Product Use Rights for Lync Server.
4.On the Initiate a Provisioning Request page, click the appropriate link to initiate a provisioning request:
5.On the Specify Provisioning Information page, enter the Access Edge service FQDN. For example, accessedge.contoso.com.
6.Enter at least one or more SIP domain names, and then click Add.
7.In the list of
Public IM Service providers, select
Skype, and click
Next to add contact information, and submit the provisioning request.
Click the link below for more information.
Accessing the Lync Server public IM connectivity provisioning site from Lync Server 2013
http://technet.microsoft.com/en-us/library/dn440174.aspx
Hope it can be helpful.
Best regards,
Eric

How to create source system for flat file loads

How do I create a source system to load flat file?
I have a screen that asks for the following:
Logical system name
Source system name
Type and release
What should I enter for these?
I am not Basis and Basis was supposed to set this up.

hi sam.
STEPS TO CREATE FLAT FILE SOURCE SYSTEM
step:1 select source systems under modeling in AWB.
step:2 select Source Systems root node.
           |---> context menu
               |--->create......
step:3 select your required source system Icon.
          (in your case it is PC Icon).
there it askes for a logical.......and source system name...
here u can specify any name of ur wish
for example:-
logical sys name --- PC_FF
source system name --- flat file source system*
*press Continue * button.
Observe the activation icon to confirm the successfull creation(_glowing lamp icon_ symbol)

How to Create a system for connecting to mysql 5.0 in VC

Hi
   I am new to SAP. I am working with SAP Netweaver 7 J2EE Version and Visual Composer. I defined systems in SAP EP but i am getting SSO error.
I need to connect to Mysql 5.0 database. I have to access that database in Visual Composer.
Please help me for creating a system and Solving the SSO error.
Any flash presentations or links or materials .. please provide me the link..
Thanks
Mohan

Hi Mohan,
You have to create and configure your system in the system administration tab in the portal.
Usually, it looks like the following:
System from template: JDBC System
Connector properties
   Connection URL: jdbc:sap:sqlserver://<serverlocation>;DatabaseName=<database name>
   Driver class name: com.sap.portals.jdbc.sqlserver.SQLServerDriver
User management properties
   User mapping type: admin, user
Set the system with an alias.
Go to user administration tab and map the user with VCRole to the configured system
(the default for MSSQL is usauly user: sa and pw: admin)
Save your changes and logon to VC with this user.
The alias name should appear in your list of systems.
Hope I helped,
Shay

How to get certificates "signed" for SSL configuration

I have configured EID 3.1 to use SSL, The generate_ssl_keys utility was used to generate the SSL certificates, but when we login to studio we get the "The site's security certificate is not trusted!" message. Has anyone got any advise on how to get the certificates generated signed by a CA?

In EID 3.1, the generate_ssl_keys utility is used to create a local CA and certificates for securing access to Endeca Server. Studio uses these certificates/keys internally to access the secured Endeca Server. These certificates are normally only used to internally secure Studio and Endeca Server (and Provisioning Service) communications.
Securing Studio with SSL/TLS from the client browser to Studio is a separate task. The documentation topic is http://docs.oracle.com/cd/E40518_01/studio.310/studio_security/toc.htm#Configuring%20SSL%20on%20the%20Studio%20application%20server which contains links to the application server topics. This is primarily an application-server task - you would follow the instructions for the application-server and/or your certificate/CA supplier, so you end-up with trusted certificates.
One common configuration is to secure Studio SSL/TLS terminated on a reverse-proxy such as OHS, so you may want to consider this option.

How to include the option for people to download adobe reader in an email campaign?

We need to attach some terms & conditions as a PDF in our mails (sending to a few thousand people), but would like to include an option to download adobe reader to read the PDF if they haven't already got one.
Is this a simple 'link to download page' or is there a widget/code or something that already exists for this? Just to make it quick & simple for email readers
Many thanks in advance!
Kathleen

Icons and web logo guidelines | Adobe

How to create Technical System in SLD configuration?

Howdy!
Our R/3 system has not packed with proper plugin so I can not use T-code rz70 to transfer system info from R/3 to SLD.
I try to create a technical system manually in SLD web UI.But in the last step of creation(ABAP based system),after I had choose the "installed product",which is SAP R/3 4.6c,"installed software component" didn't show on the right side panel as expected.
Anybody can tell me how to slove this?
Thanks indeed...

There are a few notes on http://service.sap.com/notes that may help you with this! Try note number 584654.
What version is you kernel?
I think it needs to be at least 6.30.
J2EE Engine >= 6.30 on Windows and Unix platforms
Web AS >=6.40 SP4
Also try this Problem analysis guide:
http://help.sap.com/saphelp_nw04/helpdata/en/71/7ffb3f6c78ee28e10000000a1550b0/frameset.htm

How to include a system for a configured Domain

Similar Messages

Maybe you are looking for