How to include an APD process in BW Process Chain

HI,
I have an existing process chain that I want to add an APD process to. There are dependencies. For example, I want the last 2 steps in the existing process chain to continue AFTER the APD process runs successfully. So, how would I include an APD process in my existing chain, I cannot find the variant that says APD in RSPC.

Marasa,
Thanks for your help. I tried to do the second option that you offered just by including an ABAP program variant in my process chain.
However, my process chain fails at that step with tthe following error:
11/11/2009     00:09:53     Job started     S     00     516
11/11/2009     00:09:53     Step 001 started (program RSPROCESS, variant &0000000432745, user ID BWREMOTE)     S     00     550
11/11/2009     00:10:00     Spool request (number 0000031418) created without immediate output     S     SY     355
11/11/2009     00:10:00     Processing completed with errors. See spool list     E     RSAN_PR     22
11/11/2009     00:10:00     Job cancelled after system exception ERROR_MESSAGE     A     00     564
I cannot find anything in the spool to get the exact cause of an error. When I run the APD process by itselt, it executes fine without any errors.
I used the following sap document to set this up in my process chain and followed everything they said:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/200ef8fd-a249-2b10-1d9c-91b169be870b&overridelayout=true
Thanks

Similar Messages

Explain: how to include Infospoke in Process Chain where destination is DB

Explain: how to include Infospoke in Process Chain where destination is local machine database [NOT Flatfile]

Hi vijay,
First you create an Infospoke with destination as a DB table in your local BI or BW Machine. Now add this infospoke by going through below steps.
1. Call up the process chain maintenance. Choose This graphic is explained in the accompanying text Process Chain Maintenance from the Administrator Workbench toolbar. The Process Chain Maintenance Planning View screen appears.
2. In the left-hand screen area of the required This graphic is explained in the accompanying text display component, navigate to the process chain in which you want to insert your InfoSpoke. Double-click to select it. The system displays the process chain plan view in the right-hand side of the screen.
If no suitable process chain is available, you need to create a new process chain. You can find additional information under Creating a Process Chain.
3. To insert a process for extraction by means of an InfoSpoke, choose This graphic is explained in the accompanying text Process Types in the left-hand area of the screen. The system now displays the process categories available.
4.In the process category Loading Process and Post Processing, choose the application process type This graphic is explained in the accompanying text Data Export into External Systems.
5.Insert the Data Export into External Systems application type with Drag&Drop into the process chain. The dialog box for inserting a process variant appears.
6.In the Process Variant field, enter the name of the InfoSpoke that you want to include in the process chain, or select it by means of the input help.
Once You have added the infospoke you have to write a program which will fetch the database table that you filled and transfer the data fetched to other legacy system with the help of XI System
For more information on how to infospoke on 3rd party pls find the link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
Hope this help
Harish

How to include old invoices in the invoice list

How to Include old billing documents in the invoice list.
TO be more clear:-
I created 20 invoices in the monthof JAN
I maintained the factory calender in the payer master in the month of Feb 1st and created 10 more invoices in this month.
So the system is considering only the invocies which were generated after I maintained the factory calender (Only feb invoices).
Is there any process to include the previous invoicies (Jan invoices) also to get include in the invoice list.
Help me in this regards.
Regards,
Mallesh.

It is not possible.
Regards,
Rajesh Banka

Two hard drives connected to Airport Extreme. How to include one of them in TimeMachine Backup and use other disc as Time Machine backup disc?

Hi,
the title says it all. I've got an airport extreme and two hard drives connected to it. My idea was to use one as my additional storage (say DISC STORAGE) and the other one as my backup drive (say DISC BACKUP). I would like to backup my mac AND DISC STORAGE together to DISC BACKUP using time machine. My mac has 256 GB HDD, DISC STORAGE is 1 TB big, DISC BACKUP 2 TB. So there are no space issues.
Problem: DISC STORAGE is not included in Time Machine's backup to DISC BACKUP. At the moment, only the mac is backed up to DISC BACKUP.
Does anybody know if and how I can include DISC STORAGE in the backup process?
By the way, DISC STORAGE is not listed in the "exclude from backup" list in Time Machine.
Thanks!
Arne

Unforrtunately, Time Machine cannot backup from a network drive to another drive. Time Machine will only backup a Mac and a drive that is directly attached to the Mac, via USB or FireWire.
You will need to use an application like Carbon Copy Cloner or SupoerDuper to be able to backup from DISC BACKUP to DISC STORAGE.

How to include .jar files in coldfusion code

To Integrate our cfm code with paypal jar files we do the
following steps with our local coldfusion server ,and to run and
integrate the paypal Java SDK jar files, I think we need to do the
same process on the server, can you suggest any thing to do the
following setting for my domain on the server, without setting the
class path in coldfusion administrator.
The ColdFusion application server must be configured to know
the location of the PayPal JAR
files, and your ColdFusion Markup (CFM) pages must be
configured with the absolute path to
the PayPal API certificate for the PayPal API user on whose
behalf the calls are made.
1. Install the PayPal Java SDK “Installing the
SDK”.
2. Copy a subset of the Java SDK JAR files to a location
accessible by the ColdFusion
application server. The JAR files are in SDK_root\lib and
their exact names are as
follows:
– bcmail-jdk14-128.jar
– bcprov-jdk14-128.jar
– paypal_base.jar
– paypal_stubs.jar
sax2.jar
– xerces.jar
– xpp3-1.1.3.4d_b4_min.jar
– xstream.jar-1.1.3.jar
3. With the ColdFusion Application Server Administrator, add
the absolute path of the
location you determined in Step 2 to the Java and JVM
CLASSPATH environment variable.
4. Restart the ColdFusion Application Server.
Suggest me how to include .jar files without setting
classpath.

> Suggest me how to include .jar files without setting
classpath.
Copy them to {CF_HOME}\lib, where {CF_HOME} is, for example,
C:\CFusionMX7. Restart Coldfusion.

How to include X-IDSSessionID in every header and copy the AuthToken from the previous response

Hello,
The business process is to login and logout using Web HTTP/HTML protocol in LR 11.52; while I am trying to login to the website and after several attempts keep getting error-500. One of the suggestion was to copy the X_IDXSessionID to each request. Also applied correlation but keep getting the authentication error in the session.
My concern:How to include X-IDSSessionID in every header and copy the AuthToken from the previous response into the current request header?
I got the X-IDXSessionID and X-Allscripts-AuthToken from the snapshot response and request tab. Thanks.

are you looping of this input with a for each?
/yourdata/details[1] should return always the first detail element.
or before the for each do an assing of this first detail element to "generic_details_var"
and use this var in every looping iteration (in an assign or as input for xquery)

How to Include the URL of a page in Notification Email ?

Hi ALL,
I need your help to implement the below requirement.
I have implemented Email notification in our application.so when ever the user creates any form/modify the form ,mail will be triggered to them.Now the users want to include the link in the email.
When they click the link in email ,it should be navigated to the newly created form page in Apex.
How to include the link of the page in the Email process?
Thanks,
Ramya.

Hi Tuceef,
Thanks for the response.
I have created another hidden item P8_URL1 IN page 8 and
I have created an on submit process in page processing section.
the pl/sql code is
Begin
htp.p('<script type = "text/javascript">');
function setLocation(href)
           // set the location path specified in the textbox.
           htp.p('location.href = document.getElementById(href).value;');
          htp.p('P8_URL1:= location.href');
htp.p('</script>');
end;But the code fetching the plain URL only,it's navigating to the empty form page when i click on the URL.
Please correct the code if am wrong anywhere!
Thanks & Regards,
Ramya.

How do I make Pages the default word processing program?

How do I make Pages the default word processing program, including Appleworks files?
I want any Appleworks file I open to open in Pages - is there a setting to make that happen?

Hello ADW,
To change the default programme used to open a filetype, Get Info on one of the files you are looking to set, the change the Open With selection to Pages.
Then click on Use this application to open all documents like this one.
You will have to repeat this for each file type you want to use that way.
Have a wonderful day!
-=C=-

How to include other web page in servlet response?

Is there any way how to include the contents from some other web page in my own response? For example, I wish to printout some text and below that to put the complete contents of let's say Google's page, so something like:
include("www.google.com");
...So far I found that I can either redirect to that page and l fully lose the control or include the contents of the other jsp or servlet that I made in the same project. I know I can just send the request to that outside page and read the response and print it out on my page, but the problem is when there is a JavaScript and I can't get the rendered contents but just that script. Also, I will not be able to see the images in that case, so I prefer to give the command to web browser to render and show it for me.
Thanks a lot for any help!

I already tried with streams but then just original source is written, so it means that if it is calling some scripts I will get JavaScript code instead of executed result. I thought I must somehow make the browser to process the page and just display the output because it knows how to deal with scripts.

How to create process variant in process chain

What is a process variant? i try to add Infocube compression to the fi process chain. To accomplish this task, i have to create process variant. please tell me the step by step process how to create process variant and successfully add the compression to the process chain. Can i do it directly in production? Thanks to SDN community that i can count on.

Hi Rafi,
<b>Process variants</b>
The process variant is the name of the process Within the process chain context, it displays the configuration of a process of a particular type set at the time of definition. A variant is only consistently defined together with the process type. A process can have various variants. With the load process for example, the name of the InfoPackage is the name of the process variant.
The user defines the process variant at the time when the process is scheduled. With some process types, the variants are determined internally and are stored as GUIDs.
For more info:
Process Chains
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
Processes
http://help.sap.com/saphelp_nw04/helpdata/en/7b/d4313b38bea774e10000000a114084/content.htm
Including InfoCubes in Process Chains
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/content.htm
You can create process chains directly in Production. Most of the times system allows(depends on system settings). But this is not a proper way of working. Create in Development and transport it to Production.
Hope it Helps
Srini

How to include .xml file while building a stand alone application .exe file from a Labview program

HI,
I have a labview program which loads default values of all the variables from a .xml file when executed. I am trying to build a standalone '.exe application' using
(Tools Menu --> Build Application from VI) , however I am not sure where to include this .xml file in the process? I really appreciate if some one could let me know.
Thanks
Vish

As GerdW said, it is preferable (and better practice) to use the project explorer. My guess, you didn't configure the build correctly (and probably used the default settings).
First, you have to specify your xml file as Always included is the source file tab
Now look at how the build folders are built:
The .ini file (xml in your case) is in the data folder. So in the build the relative position of the xml file is not the same as in the development environment. You have to be aware of this difference and use a diiferent relative path for the exe. You can do this using a conditional disable symbol in the project and then use the conditional disable structure in your VI.
Here in the deploy case the exe will look for the file in the data folder and in the development environment it will look in a folder name Files.
Ben64

How to include script program in nace

Hi experts,
I developed one script program now i want to transport this program to production.How to include this program in the NACE tcode
and this program belongs which application type (how to decide).This program belongs to MM module.(creating a material issue slip).I am basic abaper and i am handilng first time the script task and also i am seraching sdn forums.Please gine me the steps.

Hi,
1. Goto in NACE
2. You need to ask your functional buddy to let you know about Application area, I suppose u need to take EF.
3. Select EF from the list and than click on Output Types, select any output type (Which you wud like to give to your script)
4. Else if you like to create a new one for your script, then on same screen click on change button, then click on New Entries
And give all the detailed info.
5. To use existing output types, select a output type like "ZEDI", at the left hand side double click on Processing Routines.
6. In the Processing Routines block , Give the Program name as print program and here you need to give your SAP scrip name in Form option.
save it.
I Hopr I have covered everything, that you need.
Regards,
Lokesh

How to include an ASP page from JSP?

I had a working ASP page to be repeated on each page of the web site as an navigation bar updated from a single SiteMap.xml. Anyone knew how to include the ASP page from the JSP app?
Thanks

You might achieve your desired result by calling the ASP page from your JSP controller (server side) using the standard JAVA HTTP classes you could then process the resulting XML. I suggest you look at the JAVA API for more information in particular the JAVA.NET package and the HTTPUrlConnection class...
http://java.sun.com/j2se/1.4.2/docs/api/java/net/HttpURLConnection.html
Hope this helps,
BRgds,
Simon

How to include the file name as an XML field

Hi,
I'm using a file adapter for process a flat file and convert it into an XML. Does anybody knows how to include the file name into an XML field.
Ex.
I process the file named <b>XXIMN21022007.txt</b> and I need an XML like:
<MT_FILE>
<field1></field1>
<field2></field2>
<field3></field3>
<filename><b>XXIMN21022007.txt</b></filename>
</MT_FILE>
Regards
Gonzalo

Just go for dynamic configuration.
Check the sender file adapter to write the filename in the header (as explained in Michal's blog) and then read that header in some mapping.
U can use that even in simple message mappings.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
Your code for the filename tag would be something like:
<i>DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    http://sap.com/xi/XI/System/File,
    FileName);
return conf.get(key);</i>
Regards,
Henrique.

URGENT can anyone let me know how to include sort buttons in table maintian

hi
can anyone let me know how to include sort buttons in table maintianence
as generally table maintianec done have sort buttons i need to include the sort buttons kindly let me know on that asap
or can we use module pool in between table maintianece screen
if yes how touse and how to cod for that
regards
Arora

You can change the coding of Table Maintenance.
>> Goto SM30, give table name and goto Display/Maintain mode and copy all the GUI status from standard program into your function group. Add sort button in the GUI Status of Maintain & Display mode.
>> Goto to tablemaintenance screen generated using SE51.
>> Select change mode.
>> After PROCESS BEFORE OUTPUT, create one module to assign your function group program name to " X_HEADER-GUI_PROG = "
>> In PROCESS AFTER INPUT, add another module at the end to perform the action.
-Alpesh.Saparia

How to include an APD process in BW Process Chain

Similar Messages

Maybe you are looking for