How to include camera settings on actual image during export

Is there a way to include camera settings directly onto the image upon export of image(s) in Aperture Program?

Not without a plug-in. Aperture does not allow compositing.
The plug-in BorderFX can likely allow you to do what you want, and more. Recommended.
—Kirby.

Similar Messages

How do I include camera settings info when exporting photos?

Hello! I am taking a photography class, and the instructor wants the camera settings (i.e shutter speed, aperture, ISO, lens, etc) to be included with the photos I send for my assignments. I see these setting when I click "info" in iPhoto, but do not know how to get those settings to export along with the photos so that he can see them. Who can help?

I believe the OP is trying to export those settings
I think so too, but even without any special export settings will the EXIF tags with the camera settings be included with any JPEG version. It is not necessary to include title and location. The JPEG will include the EXIF., as can be seen in Preview.
I thought s/he might want to send a pDF with the written values as well, just in case the instructor could not read the EXIF.

How to change Camera settings while NetStream is published with H264 codec

Hi,
when I'm using H264 codec I can't modify my cam.setMode(w,h, fps) because my stream hangs (second call to cam.setMode() uhangs video. When I'm using Sorenson codec that same code works fine.
So my question is how can I change Camera settings when I'm publishing images from this camera with NetStream encoded with H264. I'm using Flash Player 11,3,300,270 Windows 7 64 bit ActiveX.
Swf compiled to target Flash Player 11.3, swf-version=16.
Regards

Try to unpublish/pause publishing just before setting the things on camera and resume/publish again after the settings are applied.
C

How important are camera settings if you use ACR?

How important is it to properly adjust the settings on your camera when taking pictures if you can change white balance, exposure, etc. in ACR?
Just curious....

How important is it to properly adjust the settings on your camera when taking pictures if you can change white balance, exposure, etc. in ACR?
Just curious....
It is critical to get exposure right in the camera. If the dynamic range of the scene is less than that of the camera, you have some exposure latitude, but it is best to expose to the right so as to get a better signal to noise ratio. Some degree of overexposure can be corrected in ACR, but blown channels (the green usually blows first due to white balance) result in loss of data and the colors may not be accurate. The white balance set on the camera does not affect the raw data, but is merely stored as metadata. If there is no neutral reference in the scene (a WhiBal or similar card is better than a white T-shirt), the an accurate white balance may be hard to obtain. In this case, it is better to use a WB preset by taking a reading from a white balance card.
ACR ignores camera settings other than WB, so the contrast, saturation and tone curve set on the camera are of no significance.

How do I get the default zooming to not include images or how can I resize everything but actual images?

I have a problem with the default zooming in firefox Using default layout.css.devPixelsPerPx=-1 or layout.css.devPixelsPerPx=1.5 makes all UI and webpage text look nice and readable, spacing is fine and everything. The only problem is that images are ALSO zoomed which is ridiculous. I guess I would like a way to scale everything BUT images. I have a hi-resolution monitor and think it's silly to have to zoom out every image on a web page just because I wanted text and the UI enlarged. I tried NoSquint using 65% for pages and 150% for text only, but that had the issue of making ONLY text scaled up and not spacing and other stuff (google searches looked even more silly using only 6 cm to the left, rows too close overwrote themselves etc.)

That is not possible.
The layout.css.devPixelsPerPx pref affects everything in Firefox, both the user interface and the browsing area.
'Full page zoom' affects all elements on web pages including images and 'zoom text only' affects the text and can cause issues with text overlapping or disappearing similar to setting a minimum font size because the containing element keeps the same dimensions.
You can't just exclude the images from zoom and have the containers expand automatically.

How do you "sync settings" between several images?

I just bought Aperture after having used Lightroom for several years. I really like it but my most commonly used tool in Lightroom is to adjust one image that is similar to several others, and then "sync the settings" so that the adjustments made to the first image are applied to all of the images I've selected. How do I achieve this in Aperture? In Lightroom it is a feature called "sync settings".

Hi rssarma, I would like to jump in and respond to your question re changing to Aperture from Lightroom. I have been a Lightroom user from the begining. I love most of the features but file handling is not one of the best. It is simple but nothing like Apples Aperture. I am in the process of learning Aperture and find the curve some what steep but...the results are what I like.
My suggestion is not to give up on Aperture and work into Lightroom until your happy. My take is you will be back to Aperture.
Good luck,
Jim Otto

How to include security settings into InDesign PDF presets?

I have prepared an InDesign template for multiple users in my team. Ihave created a set of PDF presets for exporting PDFs to keepconsistency. I want to protect all the PDF files with password and haveto include the password protection in the PDF presets. But InDesign PDFpreset is not supporting the security tab.
Currently I have suggested the batch command in Acrobat Pro for security settings.
It would be much helpful if Adobe help me in this.

riott.girl wrote:
Using the File>Adobe PDF Presets, chose anyone of the pre-existing Adobe pre-sets--not one that you've created.
Change the settings to the pre-sets you want, including the security settings, and then click "save preset".
That would be an nice easy solution, but there is no access to security settings in the PDF presets.

How to include a slug-type area on PDF export

Does anyone know how I can include a slug area (or something similar) on an AI file when I save as PDF? I need to include a part number, revision number and date of the file for reference purposes. I've tried searching and can't seem to find a solution. Thanks in advance!
Mel

To elaborate make your document artboard the correct size you need it so you can work properly.
Then place your slug as close as you feel you can then make another artboard encompassing the origina atboard plus the area the slug has been position.
That way you have the sim0ple choice of making the pdf of the larger one and then when you do not need the slug just select the document artboard.
Or if you include a bleed with trim marks then you can save with the bleed and trim mark settings and layout yur slug to fit in the area encomassed by the trim marks.
You can also use trim marks without a bleed so if you do not have bleeds you can still accomplish what you want.

Resize image during export from Imovie 11 to anamorphic. It only crops.

Hi:
I shoot with a hacked panasonic gh13 and the hack allows it to shoot anamorphic hd video without a special lens. When the footage comes out of the camera it has that stretched look to it. It should be very simple to get to true anamorphic dimensions with the custom image size options in Quicktime and Mpeg. I should be able to go to Share>Export using Quicktime>Options> then set to 1920 by 810. The stretched image should look normal after export but it only crops it no matter what option or if it is Mpeg or Quicktime. I would appreciate any direction I could get with this. It should be pretty simple.
Thanks
Thirgy

I'm not sure what 'anamorphic HD' is?
You can have anamorphic SD; which stretches 4:3 SD video to 16:9.
But HD is not anamorphic.
There are odd 1440x1080 sizes, but these are not generally described as "anamorphic HD".
I can't say I have heard of 1920 by 810 as a standard size.
iMovie Mac is really only for editing standard frame sizes, and so your video files are probably confusing it.
I would suggest you move to a dimension open editor like FCP7.
Or shoot at a standard frame size.

Aperture not showing camera settings applied on RAW images

I have the Canon EOS 1D Mark II N. When in-camera settings like contrast, sharpening, etc are applied in camera, then those images are loaded directly from card reader into Aperture the in-camera changes are not applied to the Raw images. The Jpeg images DO show the in-camera settings contrast/sharpening etc being applied. I can take the memory card and load those same images into DPP Digital Photo Professional and the settings applied in camera do show on the BOTH Raw and Jpeg files.
In Aperture when I look at the thumbnails of the RAWs and JPEGs side by side. It is obvious which ones are the jpegs just by the contrast added in camera.
I can Also take the images within Aperture-export masters to desktop, then open them in DPP and the contrast/sharpening shows on the raws and jpegs the same in DPP.. It seems to be just Aperture..
Is this Normal? That Aperture does not read the in-camera changes on the Raw files? On the Metadata EXIF Expanded, It does read the exposure Bias, shutter speed etc correctly on the Raws, just not the Contrast or sharpening changes.

Hi Kathy,
This is expected. Settings you make in the camera, for things like color space, sharpening, white balance, etc. don't really apply to RAW images. This is the way the camera and RAW software are designed -- the RAW is really untouched, and this information is tagged along as "meta information." No actual transformation on the image is performed.
You take the RAW image into a RAW converter (Aperture's a good one and make the changes you want. In some cases (White Balance) the tagged info is used, but in others (sharpening, color space) it's not. Aperture uses the widest possible color space (it's wider than ProPhoto RGB from what I've been told, though I haven't used my handy gamut checker to verify
So this contrasts with JPEGs. JPEG is a "final" format -- so the settings you have configured in your camera are actually used in the creation of the JPEG. It is sharpened, color balanced based on your settings, fit into a color space (sRGB, Adobe RGB, etc.) compressed, and written as a JPEG. You can't take these things "back" once that has been done.
Aperture actually makes working with both types of images so similar that it's difficult to really notice the differences. If you work with a more labor-intensive workflow like Adobe Camera RAW, you'll notice all the extra steps you must employ to get from RAW to JPEG.

How can we run and control live images form a camera plz help

hi
i want to now how can we run and control live images form a camera on to a aaplet.what technologyi used for this project . u can check the url http://www.jal.co.jp/en/live/ as a demo.plz can anyone guide me.how to start and which technologies to use,
regards
sheetal

Hi,
You can try a package named: JTwain, which is available at http://asprise.com/product/jtwain.
JTwain supports all kinds of digital cameras and scanners. You can use Java to access, contorl digital cameras and scanners, and of course, to acquire images with flexible settings.
The developers' guide is available @ http://asprise.com/product/jtwain/devGuide.php
In the simplest case, one line of Java code can solve your problem.
Good luck!

How do I activate my Isight camera to take an image of my gift card?

How do I activate my Isight Camera to take an image of my Gift card so I can redeem it?
The camera sees the card OK, but I don't know how to make it take an image.
Please help.
Greg.

I don't think that you can do it with older MacBook's which have iSight cameras on them, the redeem by camera lists requirements as :
Mac with a FaceTime camera (an Apple Display with FaceTime works too)
I think that you will need to manually enter the card's code

How to include SCOM R2 agent in server image (or vmware template)

Can anybody tell me how to include the SCOM R2 agent in our Windows images/templates? For the SCCM client, it is as simple as stopping the service on the reference machine, deleting the cert, and capturing. I can find no good answer on the Internets on whether the SCOM agent has some sort of unique ID that doesn't like being "duplicated".
Any help would be appreciated. (I'd rather NOT include scripted tasks or steps that install the agent AFTER an image is deployed).
My RMS is configured to auto-accept agent registrations.

Hi, I'm looking to do the same. I created a template with the agent installed; however, I still left the server (W2012 R2) in 'workgroup'. When loading and configuring the agent, I didn't get any error message since the raw server can communicate
with the management server nor have I received a 'pending approval' on the mgmt server.
I like the idea of having this pre-configured and ensuring SCOM properly detects and monitors new server additions since checklists are not followed.
Thanks.
Stanley E. Noel Jr

How to include images in my app

hi all.
I'm using Apex 2.1 over XE.
I'm sorry but i can't find any thread related to how to include images in my app.
I've uploaded several trough shared componentes / files / images, but don't know how to use it, for example, in an HTML region, as header of the page.
Thanks a lot for your help.
Fernando

Hi,
I have used four different ways to display images in my applications depending on which method is the fastest to refresh.
1. Under Application Attributes > Edit Standard Attributes > Substitutions enter your substitution string (MY_IMAGE_URL) and substitution value(http://somewhere/img)
and then in the region or template use the following syntax &MY_IMAGE_URL. in your html tags eg. img src="&MY_IMAGE_URL./banner.png" width="x" height="x">)
I have found this the best for image refresh speed, especially if the image is already cached.
2. Load your image up into Apex and don't associate it with any application and use the following tag img src="#WORKSPACE_IMAGES#banner.png" width="x" height="x" alt="">
Good for development as all images not associated to an application are available.
3. Load your image up into Apex and associate it with an application and use the following tag img src="#APP_IMAGES#banner.png" width="x" height="x" alt="">
This can be a pain during development when your application numbers continually change.
4. Use standard http address <img src="http://somewhere/banner.png" width="x" height="x">
Ben
Message was edited by:
Benton

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

cr is installed by updating your app. use help>update, or update manually
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

How to include camera settings on actual image during export

Similar Messages

Maybe you are looking for