How to Include code in User Exit
Dear Experts
I have a requirement where at the time of saving a delivery (SAPMV50A) SAP picks up the number range defined by us in table TVARV . My queries are
a. Any idea which will be the best user exit for this ?
b. And second suppose I have found a user exit in the code as follows
form user_exit_xyz
*comment
endform user_exit_xyz.
can I just go ahead and create an include in this subroutine ? If not what steps do I need to take ?
Please help !
rgds
Sameer
Moderator message: please search for information and try yourself before asking.
Edited by: Thomas Zloch on Mar 4, 2012 9:47 PM
Hi Sameer,
It is not clear.If it is a sub routine then create a implicit enhancement point and keep your code.This is possible.What is the business requirement.
Regards,
Madhu.
Similar Messages
-
How to find all the user exits includes ,
Hi All ,
I need to find all the includes which are created for purpose of implementing user exits , I know they all start with ZX* but where to get the list .
THank you all
Vinay KollaHi Vinay....
Just excute following program in your ABAP Edter....
( Input parameters: T'CODE and User exit type.)
>TABLES: MODSAP, MODACT, TSTC.
>
>PARAMETERS: INPUT1 LIKE TSTC-TCODE DEFAULT ' ',
> INPUT2 LIKE MODSAP-TYP DEFAULT ' '.
>
>DATA: SEARCH1(6),
> SEARCH2(3),
> SEARCH3 LIKE MODSAP-MEMBER.
>DATA : FIRST_ROW VALUE 'Y'.
>
>CONCATENATE: '%' INPUT1 '%' INTO SEARCH1,
> '%' INPUT2 INTO SEARCH2.
>
>SELECT * FROM TSTC WHERE TCODE LIKE SEARCH1.
> FIRST_ROW = 'Y'.
> CHECK TSTC-PGMNA NE SPACE.
> CONCATENATE '%' TSTC-PGMNA '%' INTO SEARCH3.
> SELECT * FROM MODSAP WHERE TYP LIKE SEARCH2
> AND MEMBER LIKE SEARCH3.
> SELECT SINGLE * FROM MODACT WHERE MEMBER = MODSAP-NAME.
> IF FIRST_ROW EQ 'Y'.
> WRITE: /0 TSTC-TCODE, 6 TSTC-PGMNA, 16 MODSAP-NAME, 32 MODSAP-TYP,
> 45 MODSAP-MEMBER, 70 MODACT-NAME.
> FIRST_ROW = 'N'.
> ELSE.
>WRITE: /16 MODSAP-NAME, 32 MODSAP-TYP, 45 MODSAP-MEMBER, 70 MODACT-NAME.
> ENDIF.
> CLEAR : MODSAP, MODACT.
> ENDSELECT.
> IF SY-SUBRC NE 0.
> WRITE : /0 TSTC-TCODE, 6 TSTC-PGMNA, 30 'No exits found'.
> ENDIF.
> CLEAR TSTC.
>ENDSELECT.
>
>END-OF-SELECTION.
> CLEAR: SEARCH1, SEARCH2, SEARCH3.
Thanks,
Naveen Inuganti. -
How to find the tcode for the include's in user exit
Hi
I wanted to find the tcode for the given include name in the user exit.
Can you pls help in this regard
Regards
Madhan DoraikannanHello Madhan,
Usually the include in the user exit is part of a function group which directly may not fetch u tcode. So the best option is..
1. Get the FM name and check the table modsap. This will give u the enhancement name and related information which can help u with the tcode.
2. to use the where used option which will lead you though multiple program till u reach the main program where u can search for transaction.
e.g say u r trying to search include ZXM06U41 which exists in the FM EXIT_SAPMM06E_016. Now if u do a where used for this FM it will show program name MM06EF0C_CUSTSCR1_ITEM_SET_D03 if u again go for where used it will show u MM06EF0C. now if u click of the Display object list in the toolbar u will get the list of tcodes also. -
How to find out the user-exits?
hi.
how to find out the user-exits?
regards
eswar.Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards -
How to find out appropriate user exit
Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
BasuLook for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM -
How to find the ME29N 'USER EXIT' when our save the release PO after.
How to find the ME29N 'USER EXIT' when our save the release PO after.
which user exit will be used?
thanks.
alex.Hi,
process :
go to tranx code : ME29N ,
System---->Status , here copy the program name (SAPLMEGUI),
go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
tranx code : CMOD , Utilites--->Sap Enanchement,
specify the package name : ME
and execute, displays a list of exits ,
and find out our suitable exit based on requirement.
check these : EXIT_SAPMM06E_021
reg
Siva -
How to find a correct User-Exit
Hi All
I need to make changes in the user exit and there are many user-exits in the standard program here my question is how to find the correct user-exit which suits our requirement.
Thanks
srinirun this program by giving ur t code...and click the exit it will go to SMOD there u read the documentation of that exit..if ur requirement satisfies try to use that one..
REPORT ZUSEREXIT.
*report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : devclass like tadir-devclass.
parameters : tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname = tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
hai all MM gurus,
How to find out the user exits for any Tcodes or for any documents?.for this there is a user written program called "zuserexit" which will be available. Run the program & give Tcode as input u ll get all exits for that.
http://www.sap-img.com/ab038.htm
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program -
How can I find the USer Exit...
Hi,
How can I find the USer Exit...
I need to do changes for this User Exit :EXIT_SAPLKEII_002
In which T-code I can open this Exit
Ex: Go to some Transcation code and then give the name of the Exit ato access this Exit
...any sugesstions will be apprecaited!
Thanks & Regards,
KittuHi,
the EXIT : EXIT_SAPLKEII_002 is the exit,in this SAPLKEII is the standard Program.Copy this program and go to transactio SE38 and press Enter and then go for the option Where used list and check the check box Transaction. It displays the possible Transactions that the Exit triggers
Regards,
Vijaya Lakshmi.T -
How to find the exact user exit for our requirement?
Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
<b>How to find the exact user-exit for your requirement.</b>
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
<b>The procedure to find the package name.</b>
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
<b>Checking if the user-exit is getting triggered or not.</b>
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad -
How to find the appropriate user exit for invoic02 idoc in idoc_output_invo
Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM -
How to find out all user exits edited
Hi All,
Would you know how to find out all user exits have been ever edited?
Can we find out those user exit by some tcode or table?
Thank you very much
Best Regards,
Calvin
Edited by: Sam Sum on Mar 2, 2009 5:09 AMHi,
Just try this in your system.
Go to SE38 and give ZX* and press F4.
Have a look at table MODATTR to find the active projects in your system.
Regards
Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM -
hey guys i want the code for user-exits for inclusion of Excise Chapter ID mandatory in PO .....
regards,
Naveenwhich user exit u are using ?
check the BADI for the same .
SE15->Enhancements->BADI--->definations -
>search on Package = ME.
and see BADI definition called Process _cust.
Regards
Peram -
How to know where the user exits or enhancement used in standard sap code?
Hi
I m pretty new to abap.
How can I know where the user exits or enhancement used in standard sap code?
As i have to add some functionality to the standard sap code. I m looking to search the enhancement or user exits used in this standard code wher i can add my functionality.
thanks in advance.
Moderator message : Search for available information, thread locked.
Edited by: Vinod Kumar on Oct 19, 2011 2:38 PMHi Henry,
I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
Srinivas -
ATC not checking code in user exit includes
Dear Friends,
I'm not sure if you have faced this issue, but I have not found anyone or any post or any document or any OSS note talking about it.
I've recently have realized than when using ATC for checking the custom code of an Z include it was finding cero errors when it was actually full of them.
In fact using code inspector, the errors where found. It was not an issue of using a different variant, this was checked, CI and ATC are using the same,
The issue itself was clear: When the ATC checks a parent object its checks the code of its includes. If you try to check an include directly with ATC, it is ignored with message "No checks are available for the objects types", giving the chance to "add master program" so it will be checked when the master program is checked with all its includes. Last, ATC neither Code Inspector checks custom code.
The end result is that when trying to check the code in a user exit include with ATC it does not find any error.
I can think about encapsulating the code found in a user exits but this is a titanic task.
The main problem is that the jobs for getting in CCLM the quality required massive ATC runs that will not catch the errors in these kind of objects.
Have you face this issue? do you have any recommendation?
I would like your opinion before raising this as customer message, as from my point of this this may require a SAP correction.
Thanks
AubinHello Aubin,
to be perfectely honest I have not started with the indeep analysis yet. One reason is that the behaviour regarding exit techniques has got improoved recently so it is important to do the analysis on a SP level close / identical to yours.
If I am not mistaken CMOD function exits yield into 2 TADIR keys:
- 'R3TR' 'FUGX' .... - referring to the definition of the function group - typically provided by SAP - residing in a SAP package
- 'R3TR' 'FUGS' .... - referring to the implementation - typically custom code - residing in a Z-Package
My initial assumpution was that mapping partobjects always return FUGX but shall return FUGS. And also I was assuming the custom package shall contain the 'FUGS' implementation which shall enable checking out of the box.
But it seems these assumptions are not valid. I am not sure wether I would be able to analyse this issue this week. In any case I will update this thread as soon as the analysis has been done.
Best Regards
Klaus
Maybe you are looking for
-
Consuming URL renames XSD and WSDL files in OSB
We try to define a proxy service in the OSB 11g by consuming an URL. We have all our WSDLs, XSDs etc online available, that is references like import of include in a WSDL uses URLs to identify other WSDLs or XSDs. In fact a webservice has a concrete
-
Xml response in browser .. how to deal with
OK .. I have a basic question here but I'm long winded so bear with me. Background: I am submitting an HTML form to a secure website, with a username/password, and that web site in turn returns me a webpage with XML in it that looks something like th
-
I was just trying to fix my wobbly screen and after finishing and connecting the screen to its port once again the screen didn't work but the processor is running normally so i just want to know what is the problem with my mid 2012 macbook pro?
-
Related to payroll postings-Reports
Hi all, Can anyone tell me what are the reports used to access Personal number, WBS element, amount and Assignment percentage after doing postings to G/L accounts. Regards, evani
-
User Settings and System Settings
Which settings are stored at the user level and which settings are stored at the system level? I asked Apple support if it was possible to reset all Mavericks settings to default and retain my apps and data. They suggested I create a new user and tra