How to include CRMT_BW_SRV_PROC_H_SPEC include in datasource
Good morning everybody
We are integrating BI with CRM for reporting. One of the datasources we
are using is 0CRM_SRV_REQ_INCI_H. This uses transfer structure
CRMT_BW_SRV_REQ_INCIDENT_H. Within this is include
CRMT_BW_SRV_PROC_H_SPEC. This contains field BWSTONESVTK which we need
to include in the datasource.
However, from BWA1 we can do the mapping for this field but then we get
an error message "Dif. selection indicators in ROOSFIELD (P) and
SMOXRELP". We cannot find any documentation which clearly explains how
to include the standard field BWSTONESVTK in our datasource.
Any ideas anyone?
Dear
0CRM_SRV_REQ_INCI_H I am using this DS but as per standard sap delivered i didnt find any standard infocube for this data source,
Can you please help in finding standard infocube for this datas source.
Thanks
Paras MAli
Similar Messages
-
How to include 0STOCK_VAL in a Query based on APO DataSource?
Hi All,
I have a requirement to include *0STOCK_VAL" from Inventory to the APO InfoCube. But the problem with this is, this particular KeyFigure is not present in the APO hence it cannot be included in the APO DataSource i.e. we cannot get this from the Source System.
I checked the Production system, 0STOCK_VAL InfoObject is avaiable in one of the InfoCube but it is not present in any DSO's. Since it is not present in any of the DSO's we cannot write a Routine to read it from any of the table.
I even thought of including the InfoCube where 0STOCK_VAL is present into a MultiProvider along with the APO InfoCube. I can define the joining condition based on Plant and Material. But if I drill down any other characteristics which are not common in both the InfoCube then we will have a blank line in the Query which is not recommended.
But this KeyFigure is very much needed in the Query.
My question is how to include this in the APO InfoCube or How to get this in the Query with values??
Can anybody please help me on this.
Thanks in advance.
Prasapbihi Matt,
In your example like a transaction was paid for with a payment type of PTAM, then you need all the transaction details. I suppose that all the required transaction details along with payment type PTAM will be loaded into an infoprovider and you run a report on top of this infoprovider. Then for that report you need to have a selection screen variable for Payment Type and if the user enters the payment type PTAM, then he can get all the other transaction details from the infoprovider.
Let me know if i don't understand the requirement correctly.
Hope it helps.... -
HOW to include a reference currency fields in a view ?
Hello Experts,
<b>I am having Currency fields error in generic extraction</b>
I have table where I am trying to extract data to BW via generic extraction. When I tried
to extract with the TABLE its giving me an error
<b>Invalid extract structure template RPSCO of DataSource ZBW_REP3_TEST
You tried to generate an extract structure with the template structure RPSCO. This operation failed, because the template structure quantityfields or currency fields, for example, field WLP00 refer to a differenttable</b>.
Now I created a view with all the fields same as my table.
But its still giving me the same error and taking all the fields as a primary keys. I have over 12 currency fields in the table. I am confused how to fix this issue and add a currency field to my view?
hOW to include a reference currency fields in a view ?
All inputs are much appreciated.
Thanks and Regards,
HarishThank you for your responce,
Can you please check my view and let me know where I am going wrong
View Table Field Dataele Data
field type 0
WLP01 RPSCO WLP01 BP_WPL CURR 15 Period value in ledger currency
WLP02 RPSCO WLP02 BP_WPL CURR 15 Period value in ledger currency
WLP03 RPSCO WLP03 BP_WPL CURR 15 Period value in ledger currency
WLP04 RPSCO WLP04 BP_WPL CURR 15 Period value in ledger currency
WLP05 RPSCO WLP05 BP_WPL CURR 15 Period value in ledger currency
WLP06 RPSCO WLP06 BP_WPL CURR 15 Period value in ledger currency
WLP07 RPSCO WLP07 BP_WPL CURR 15 Period value in ledger currency
WLP08 RPSCO WLP08 BP_WPL CURR 15 Period value in ledger currency
WLP09 RPSCO WLP09 BP_WPL CURR 15 Period value in ledger currency
If I add a
Table TCURC against any field what would be the view field and data element
Do I need to tick MOD?
Please suggest.
Kapadia,
If I do that its still taking all the fields are a primary keys and bringing 6 lakh records to where I originally have 49 records in a table
Thanks and Regards,
Harish -
How to include old invoices in the invoice list
How to Include old billing documents in the invoice list.
TO be more clear:-
I created 20 invoices in the monthof JAN
I maintained the factory calender in the payer master in the month of Feb 1st and created 10 more invoices in this month.
So the system is considering only the invocies which were generated after I maintained the factory calender (Only feb invoices).
Is there any process to include the previous invoicies (Jan invoices) also to get include in the invoice list.
Help me in this regards.
Regards,
Mallesh.It is not possible.
Regards,
Rajesh Banka -
How to include a jsp page in another jsp jsp page
hi,
i m trying to include a jsp page name "header.jsp" into one jsp page name"selectattribute.jsp" i m using these commands in "selectattribute.jsp"
<%@include file "header.jsp"%> bcz both these jsp page are C:\program files\tomcat 4.0\webapps\examples\jsp\Poject\
but the problem is that , i m invoking this jsp page "selectattribute.jsp" from a servlet reportcontroller.java using REQUEST DISPATCHER.
the servlet is in
C:\Program files\tomcat 4.0\webapps\examples\WEB-INF\classes\Project\
i want to know how to include some other jsp page in a jsp page and how to invoke applet from jsp page when that particular jsp page is being invoked by servlet.
plz help
manishuse this for including in your selectattribute.jsp
<jsp:include page="header.jsp" flush="true"/>
I never tried calling an applet. I think you can write the code for calling the applet in a javabean method and call the method in the jsp -
How to include one view into another view
Hi SDN's,
Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
LIKP-KUNNR -> KNA1-ADRNR
KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
LIKP-ERNAM -> USR21-BNAME.
USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
USR21-PERSNUMBER -> ADR6-PERSNUMBER.
In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim -
How to include a license header in fxml file?
How to include a license header in fxml file?
I tried xml block comments <!-- mylicense here -->
but it wasn't accepted by screen builder.
Also I wondered, even if it had been accepted, would screen builder have saved the header back - or deleted it?All XML documents should begin with an XML declaration.
If you have your fxml file starting with the following lines :
<?xml version="1.0" encoding="UTF-8"?>
<!-- mylicense here -->
.. it will be loaded in Scene Builder, and saved back as is. -
I would like to know how to include entries in my TOC that refer to paragraph styles listed before the TOC.
Example:
page i. Title Page
page ii. Abstract
page iii. Table of Contents
I want the TOC on page iii to include the entries "title page" and "abstract". Is this possible?
Thank you-Thesis formatting rules.
Can you answer another question?
How do I change the text for a TOC entry? For example,
I have selected the title on my first page, for example "Summer Report" and selected a paragraph style for it, and added it in the TOC. Now the TOC will have this entry for "Summer Report" and the associated page. But I want it to say "Title Page" instead. Can I edit this text? In order words, have the TOC point to something with whatever name I want to give it, even though it is not the actual name of the section? -
How to include WS-Security Header in the WSDL
hi
how to include WS-Security Header which have username and password as
i had seen the below link it deals with just hello world which is not using any Services(DBAdapter) is it possible to use DBAdapter as the steps present in the below link how to include WS-Security Header which have username and password
http://blogs.oracle.com/reynolds/2005/09/invoking_bpel_from_an_html_for.htmlAs Amir suggested, you may provide in the URL but I wouldn't suggest it though. You don't want to hard code the user ID and password within in the WSDL because it is a bad practice especially the user ID and password may be different in different systems and every time you change the password, you have to regenarate your WSDL.
May be you thought through this but just in case if you didn't
KK -
How to include Material Cost in the SD report
Hi,
I am working on Cube 0SD_C03 for the Sales and Distribution Report "Sales Contribution - Product Wise u2013 KPI" where I have to show the following information which are given below.
1. Total Sales Qty.
2. Total Sales Value
3. Total Material Cost
For third one I do not know how to include this in this SD report.
so please tell me about this if anybody has idea about this?Hi Francisco,
Note:
your xml should only have
<URL>http://dbxserver.dbxprts.com:7778/pls/apex/f?p=134:1:::NO::P1_ID_CONSTANCIA:1183</URL>
Show me your sample XML , i can help you.
What is your expected output ? PDF or HTML ?
here it is.
option1:
If the XML data includes an element that contains a hyperlink , then you can use that element to create dynamic hyperlinks at runtime.
a. insert hyperlink from word menu
b. In the Type the file or Web page name field of the Insert Hyperlink dialog box, enter the following syntax:
c. {ELEMENT_NAME_WHICH_HAS_URL_LINK}
where ELEMENT_NAME_WHICH_HAS_URL_LINK is the xml data element name
option2:
create a form field, you can add it
<fo:basic-link external-destination="http://www.google..com">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link external-destination="{ELEMENT_NAME}">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link>
<xsl:attribute name="external-destination"><xsl:value-of select="ELEMENT_URL"/>
</xsl:attribute>
<xsl:value-of select="LINK_NAME"/>
</fo:basic-link> -
How to include SCOM R2 agent in server image (or vmware template)
Can anybody tell me how to include the SCOM R2 agent in our Windows images/templates? For the SCCM client, it is as simple as stopping the service on the reference machine, deleting the cert, and capturing. I can find no good answer on the Internets on whether the SCOM agent has some sort of unique ID that doesn't like being "duplicated".
Any help would be appreciated. (I'd rather NOT include scripted tasks or steps that install the agent AFTER an image is deployed).
My RMS is configured to auto-accept agent registrations.Hi, I'm looking to do the same. I created a template with the agent installed; however, I still left the server (W2012 R2) in 'workgroup'. When loading and configuring the agent, I didn't get any error message since the raw server can communicate
with the management server nor have I received a 'pending approval' on the mgmt server.
I like the idea of having this pre-configured and ensuring SCOM properly detects and monitors new server additions since checklists are not followed.
Thanks.
Stanley E. Noel Jr -
How to include the page dynamically in JSF
Hi all
Below is static include
<jsp:include page="../inc/sideMenu.inc"/>
How to include the file dynamically
ThanksHi,
Though I have not tried it I think making use of a variable to hold the page name to be included should work. Could you try this and see if it works?
Cheers
Giri :-) -
How to include the pages dynamically in JSF
Hi all
Below is static include
<jsp:include page="../inc/sideMenu.inc"/>How to include the file dynamically
Thanks
SudhakarHi,
Though I have not tried it I think making use of a variable to hold the page name to be included should work. Could you try this and see if it works?
Cheers
Giri :-) -
How to include .jar files in coldfusion code
To Integrate our cfm code with paypal jar files we do the
following steps with our local coldfusion server ,and to run and
integrate the paypal Java SDK jar files, I think we need to do the
same process on the server, can you suggest any thing to do the
following setting for my domain on the server, without setting the
class path in coldfusion administrator.
The ColdFusion application server must be configured to know
the location of the PayPal JAR
files, and your ColdFusion Markup (CFM) pages must be
configured with the absolute path to
the PayPal API certificate for the PayPal API user on whose
behalf the calls are made.
1. Install the PayPal Java SDK “Installing the
SDK”.
2. Copy a subset of the Java SDK JAR files to a location
accessible by the ColdFusion
application server. The JAR files are in SDK_root\lib and
their exact names are as
follows:
– bcmail-jdk14-128.jar
– bcprov-jdk14-128.jar
– paypal_base.jar
– paypal_stubs.jar
sax2.jar
– xerces.jar
– xpp3-1.1.3.4d_b4_min.jar
– xstream.jar-1.1.3.jar
3. With the ColdFusion Application Server Administrator, add
the absolute path of the
location you determined in Step 2 to the Java and JVM
CLASSPATH environment variable.
4. Restart the ColdFusion Application Server.
Suggest me how to include .jar files without setting
classpath.> Suggest me how to include .jar files without setting
classpath.
Copy them to {CF_HOME}\lib, where {CF_HOME} is, for example,
C:\CFusionMX7. Restart Coldfusion. -
Hello,
The business process is to login and logout using Web HTTP/HTML protocol in LR 11.52; while I am trying to login to the website and after several attempts keep getting error-500. One of the suggestion was to copy the X_IDXSessionID to each request. Also applied correlation but keep getting the authentication error in the session.
My concern:How to include X-IDSSessionID in every header and copy the AuthToken from the previous response into the current request header?
I got the X-IDXSessionID and X-Allscripts-AuthToken from the snapshot response and request tab. Thanks.are you looping of this input with a for each?
/yourdata/details[1] should return always the first detail element.
or before the for each do an assing of this first detail element to "generic_details_var"
and use this var in every looping iteration (in an assign or as input for xquery)
Maybe you are looking for
-
Urjent-how to add line items in tcode-FBL3N
Hi Experts, How to add line items customer, customer name, vendor and vendor name in FBL3N. Thanks in advance. mahe Moderator message - Please do not use words like "urjent". Please ask a specific question. Please search the forum. This question h
-
Itunes not working on my windows 7 64 bit pc
Every time i load itunes it will run for a few seconds and then a box appears Itunes has stopped working.
-
The best Free Flash Image Gallery
Which is the best free flash image gallery for Iweb?
-
Looking for Zimbra Messages to Outlook Converter
Recently got a migration project to move Zimbra Mailboxes to Outlook. Suggest steps required to perform this migration project smoothly. We need to migrate mails, contacts and calendars from Zimbra Desktop to Outlook.
-
Premiere Elements will not install!
Uninstall, reinstall the result is always the same; I end up with error: 1. Very frustrating. Does anybody know how I can fix this? Thank you.