How to include key field in classification datasource?
Hello,
How can I include key fields in a new classification datasource?
When i try to generate my classification datasource i get this error:
No key field found for creation of DataSource
Diagnosis
During generation of a classification or configuration DataSource, only those key fields for the object table (field "Obj.Tabelle") that are already present in the basis DataSource transferred to the extract structure. This is the case when none of the key fields of the object table were found in the structure of the basis DataSource.
Hence the datasource does not get generated.
Thank you very much and regards.
Hello Prem,
Yes, the characteristisc are in the system. I also saved these charateristics, they are in N status at the moment.
The problem is when i click on Datasouce buttom to generate the datasource, this is when I get the error message i mention above.
I tried to do an example with 0MATERIAL_ATTR with obj. table MARA and class cat 001 and i had no problem.
Then i try to do it with 0PLANT_ATTR obj table BETR and class cat 030 and i get this key problem.
Can this be related to the fact that MARA table has got a key and BETR does not have one?
Thank you and Regards.
Similar Messages
-
How to set key fields in a Database view
Hi guru's
iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
thanks in advance,
Balaji.Stake a look at this:
Diagnosis
In the view, not all of the mandatory fields were included as key
fields. The key of the view therefore is not unique.
System Response
All the fields are regarded as key fields in order to guarantee that th
key lengths are unique.
Procedure
For views with a large number of fields, this could have a negative
effect on the performance for the language construction described below
In this case, all the mandatory key fields should be included in the
view.
regards -
How to update key fields for table
Hi,
how to update key fields for a table.The update statement is not working for the same.
Regards,Hi,
See the below example.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
Regards,
raj. -
How many primary key fields allowed for one table?
hi,
when i creating a table , how many primary key fields are allowed for one table.
please any one give ans
thanksJust checked it, Its 255, not 155. You can have as many key fields as you want, but you can not go over the 255 byte length for the total of all key fields. You will get a warning for over 120, as it says that there is limited functionality with a key over 120 in length.
Again, this is a total length of all key fields.
Regards,
Rich Heilman -
Field in Classification Datasource not getting populated
Hi all,
I created a classifiacation datasource 1CL_ODS_001 from the MCH1 Table. when checking this in RSA3, Data is not populating in classification datasource in the field LOBM_HSDAT, LOBM_LFDAT, LOBM_VFDAT etc.
How does data get populated in LOBM fields.
Do i have to make some changes for data to get populated in this field.
Help needed please.
Regards,
MariadasHi Vishnu,
Thanks for your response.
I followed the procedure described in this article.
"Step by Step Guide to Extract Batch Master Data via Generic and Classification Datasource to BW" http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a8b9c1-dee5-2d10-feb5-9b0d54126782?quicklink=index&overridelayout=true
I created a datasource from the View and fromt that datasource i created a classification datasource.
I checked in RSA6, the hide field is not checked. Is there anything else that i can do to update the fields. -
How to merge key field from external source system with SAP R/3 master
Hi,
In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
0GL_ACCOUNT Short Description Source System
100 D1 R/3
200 D2 R/3
300 D3 R/3
400 D4 R/3
500 D5 R/3
Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW ZDSO_FI-
GL_file Key Figure1
400 789
200 567
Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
0GL_ACCOUNT Short Description Source System
400
200
100 D1 R/3
200 D2 R/3
300 D3 R/3
400 D4 R/3
500 D5 R/3
So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
Thanks in advance.
NirmitBetter post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.
-
How to Edit Key Fields or Delete Lines from Table Entries
Hi Experts
While releasing Transport Request Number we are getting an error during release. This seems to be as a result of improper data feed while running of eCATT's . The dates in the all these fields have been entered as " . .0101" which is in the wrong format ( eg. Table T811F u2013u201CSDATEu201D field). "SDATE" seems to the key field of the table . Can you please guide on how we may delete these lines or edit the field in the table.
Regards
AnandaHello,
I dont think its a good idea to delete the records from those standard tables. You rather re-run your ecatt and edit/update the existing records and try.
regds,
Kiran -
How to include new fields in PRICAT
Hi,
My aim is to import a new field to the PRICAT price catalogue, and be able to
maintain this field in transaction W_PRICAT_MAINTAIN.
I have entered the new field in table PRICAT_K003 (using an append structure),
and have used the Badi implementation WRF_PRICAT_DIALOG to include the new field in the ALV report definition for transaction W_PRICAT_MAINTAIN. For this purpose I also included the field in structure WRF_PRICAT_K003_STY.
However, when trying to make the necessary changes to copy the field content from PRICAT_K003 to the new screen field, I encounter a few problems.
For this I have created a new Badi implementation for Badi definition
WRF_PRICAT_POOL, method IF_EX_WRF_PRICAT_POOL~EXTEND_ARTICLE_MASTER.
This method uses parameter io_inbound_item (type ref to CL_INBOUND_ITEM). The field doesn't seem to be visible in any of the available structures in this method. I have attempted to include the new field in some of the other structures (in addtion to WRF_PRICAT_K003_STY), but have been told by the system not to do this.
Any suggestions on how to solve this problem?
If there is anybody out there who have a description on how to import new fields
into PRICAT and further on to the article master, I would very much appreciate if you could pass it on to me.
Best regards,
Per Erik FjeldeHi,
I have a similar problem with inbound pricat. I extended PRICAT_K003 with a few custom fields. These fields are filled using a BAPI table extension and implementing IF_EX_PRICAT_IN_EXTIN. The fields show up correctly in W_PRICAT_MAINTAIN and are also filled when I look in the database table. But when I create an article master from an entry in the pricate catalogue, all custom fields are cleared. I wanted to use IF_EX_WRF_BADIPRE_POST_MAT~PRICAT_PRE_POSTING_PROCESS to transfer the custom fields to MARA, but the incoming structures of the method only include blank custom fields.
So I found IF_EX_WRF_PRICAT_POOL, but it's methods include only structures which are not extendable. So I don't see how I can preserve the data in my custom fields.
Per Erik, have you found a solution for your problem?
Is there anybody else out there who knows how to transfer custom fields from the price catalogue to material master data?
Best regards,
Holger Merk -
How to include Unit field(0BASE_UOM) in InfoCube
Hi experts
I am not able to include the field 0BASE_UOM in the cube as InfoObject for that field is not available,also mapping is done as 0UNIT for the field BASE_UNIT in transfer rule.Hi,
If you can change the units of the key figure which has unit as 0UNIT to BASE_UOM or create a new key figure with the unit as 0BASE_UOM then it will help yuo.
If you don't have 0Base_uom in the cube there is no way that you can make a selection at the query level for the user input on units or you will have to change your converison logic.
So for any ley figure if you want to see it's value in different value it's unit should be 0BASE_UOM in your case since your business logic is to convert it from 0BASE_UOM to other units.
SO I will suggest to create a new key figure with BASE_UOM and map this base uom to 0unit object in R/3 as 0base_uom references 0unit only.
If not then you will have to write a new logic to convert 0unit to the target units.
Thanks -
How to include new fields for output conditions
Dear Gurus,
I want to maintain the field "kunag" in output condition table.But it's displaying in allowed filedcatalog but at the time of creating condition table it's not showing there.Please advice me.
Thanks
HariHI TRY TO ADD THE FILED TO CONDITION TABLE and refer below it may helps you
<b>please click on the link</b>
<a href="http://www.sap-basis-abap.com/sd/how-to-add-new-fields-to-field-catalog.htm">Adding New field</a>
Message was edited by:
SHESAGIRI GEDILA -
In LSMW how to include customer fields in BAPI method ?
Hi all,
We have a requirement to use BAPI method in LSMW. We have some custom fields defined needs to be handled in BAPI structures.Please tell me how to handle BAPI extension structures(EXTENSIONIN/OUT) in LSMW.Hi Venugopal,
You can use the sold to party field fiield for your requirement.
Press f4, you will get a pop up to select customer depending on various selection criteria including customer name.
If can enter the customer name, which will sort out the sold to party number whihc you can use.
If this is not wat is required you have to copy the transaction and create a new Zreport.
Hope this helps you.
Thanks
Arun -
How to include the field BSEG-FDLEV in the invoice FV60 and F-43
hi
i am try to activate the cash management in my SAP, but i am not able to open the field BSEG-FDLEV (PLANNING LEVEL) in the additional data of the invoice voucher F-43 and FV60
Is there anyone that knows how to do it? i have played with the field status group of the reconciliation account and the posting key, but nothing happened.
I have understood that it should be some customizing company level.
Any help is more than welcome.
best regards
AngeloHi,
Check the below link which is useful
Re: change planning level in FI document
Thanks
Aravind -
How to include a field in the search criteria.
Hi,
In B2B, there is a requirement In Account Details.jsp , to add a new field "Your reference". this field should haev the value same as from the order creation page:Your referene field. This field should not be included in the result list. This should be used as a search criteria. I have added that YOUR Reference Field in Account Details.JSP,.Now i need use it for search criteria.C
Could you kindly suggest me how this field can be included in the search critertia in Funciton Module "Zb2b_Account_Details.
Thanks & Regards,
Sujitha. S
Edited by: Sujisruthy on Jun 16, 2010 1:23 PMHi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
- Maintain/supply your own customer fields
- Update your own customer-specific tables
You cannot:
- Change standard fields
- Change data that depends on the document header in the items
- Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit -
How to include z-fields into BAPI_GOODSMVT_CREATE
Hi,
In MIGO transaction, we have aded some fields on external tabs.
These fields are mandatory fields
The data of these fields will be stored in a Z-table when we save the MIGO.
We have used BADI s to do this. It is working fine.
Now, I want to post some data using MIGO tansaction. I want to use BAPI_GOODSMVT_CREATE to post tha data.
How can I include my newly added fields in this BAPI ?
Can u plz write the solutions?
ThanksHi,
Go through the FM documentation of BAPI_GOODSMVT_CREATE, this gives some information how to populate the custom fields.
Table parameter : EXTENSIONIN
And check the BADI: MB_BAPI_GOODSMVT_CREATE which is used to populate the custom fields for the material document.
I think you also require to implement this badi in your case.
You also need to extend the tables with the custom fields
With regards,
Dwarakanath.S -
How to include new driver and configure datasource in NW 7.0
Hi,
I have deployed my application in the app server and now i need to add the ms sql drivers to the application server and configure datasource to it.
Can any one help me to configure the datsource in Nw 7.0 and also how to add the driver files tp app server..?
thanks in advance
jayakumarHi,
Follow these links:
How To Install and Configure External Drivers for the JDBC & JMS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f
http://saphelp.border-states.com/EN/b3/cc633c3a892251e10000000a114084/content.htm
http://www.sapag.co.in/JDBC%20Adapter-Type2JDBCDriver%20Deployment.html
Regards,
Nithiyanandam
Reward points
Maybe you are looking for
-
MY IPOD SAYS IT HAS VIDEOS BUT NO VIDEOS ARE ON IT
MY 5TH GEN IPOD SAYS IT HAS 99 VIDEOS IN THE ABOUT SECTION OF SETTINGS.I DO HAVE VIDEOS THAT I BOUGHT AND THEY WORK JUST FINE.I CHECKED THE FORMAT OF THE VIDEO PODCASTS I HAVE AND THEY ARE GOOD.THEY PLAY PERFECTLY ON ITUNES BUT I CANT SEE OR HEAR THE
-
Hello all, I would like to ask, whether it is possible to post invoice receipt to an purchase order/SD order via the tc FB01. I know the usuall way is via MIRO. I'he tried to post it via FB01 with the document type RE, I filled the field purchase ord
-
How to display local image using JSP in Struts
I am trying to display image from my local disk (eg. file://C:/Documents%20and%20Settings/varshaaz/Desktop/DSC_6172.jpg). When I execute my JSP(http://localhost:8080/sharedgreeting/test.jsp) , Image doesn't display instead I see cross icon. Though pr
-
Hello, I recently bought my ipad and since i want to use it for taking notes in class i bought the pages app from itunes. File sharing should be available for pages right? But i cannot enable file sharing in my ipad, there's no file sharing tab in th
-
Yosimite, Flash Player 15, Adobe Air and Zinio 4
Using Yosemite, Safari and have uninstalled all the Flash Player. Downloaded latest version of Flash Player Air. Ok , but when i try to open the Zinio package I get notification that the Flash file is broken and will not open. Weird