How to include non-photo text files when burning a DVD-RW

I'm using Photoshop Elements 3.0.1 on Windows XP Service Pack 2.
I want to include a couple of text (TXT) files on a DVD-RW disc that I'm going to burn my photos to. The text files will contain a chronicle of the trip on which I took the photos.
I can't figure out how to get Photoshop Elements (PSE) to let me include these text files. Is there a way to do that in PSE? It seems to only allow you to work with photo files.
As a work-around, I tried first burning the text files to the disc using Nero and not finalizing the disc. I then tried to use PSE's burn command to add the photos, but PSE objected that the disc was not empty and asked me if I wanted to erase its contents. When I said "No", it asked me to insert a different disc. So apparently PSE will only work with an empty disc or a partially-full disc that you are willing to erase first.
Help!
Thanks.
Steve Westfall

Ward,
I didn't try burning the photos first and then burning the text files with Nero, because I read elsewhere in the forum that PSE has the nasty habit of always finalizing the disc when it finishes its burning session, which means you couldn't add anything to it in a subsequent burning session. However, I haven't verified that. I'll have to try it.
The work-around that I finally came up with and successfully used was basically your second option. I used the export command to export the pictures that I want to a directory, and then used Nero to burn those pictures and anything else I want to the disc.
Still, it seems like there ought to be a way to get PSE to include files other than photos.
Thanks for your input.
Steve

Similar Messages

  • How to get tab delimited text file when Stored Procedure executes ?

    Hello Everyone,
    I have a stored procedure which returns 1 result set as an output.
    I want the output as a Tab Delimited Text file.
    I know that I can use SSIS and get the same output but I am not allowed to use SSIS in this case.
    Is there any other ways ?
    I will be really appreciate If someone can answer with, How many different ways I can get Tab delimited text file ?
    Thanks in advance
    Henary

    you can do that by using SQLCMD
    http://blog.sqlauthority.com/2013/03/05/sql-server-exporting-query-results-to-csv-using-sqlcmd/
    you can also use BCP 
    EXEC master..xp_cmdshell 'bcp "select * from tempdb.dbo.orders" queryout "c:\output.txt" -c -T'
    EXEC master..xp_cmdshell 'bcp "exec usertest.dbo.proctest" queryout "c:\output.txt" -c -T'
    --Prashanth

  • How do I Maintain the Order Photos Are Displayed When Burning a DVD

    I have created an album from several different events. I want to burn this album to a DVD for a presentation. When I do this, the photos are reorganized and displayed by date/time and separated into two different groups. How can I burn a DVD that maintains the order of photos in the album?
    Thanks,
    Peter

    Yay!  I finally found out how to keep the photos in your albums in the correct order when you export the album! I am fortunate to have AppleCare so I decided to call them after trying to figure this out for years.
    The fellow on the phone said he'd had others call about this and that he and a caller figured it out, trial and error. I suggested they add it to the user guide for the rest of us!
    Here you go:
    1. Select your album and all the photos in it.
    2. Go to Export under File
    3. Change File Name option to Sequential
    4. Where it says "Prefix for Sequential" type in the exact name of your album.
    That's it! When you hit Export, the photos stay in perfect order! Yay!
    0

  • How can I solve an "authoring" problem when burning to dvd disc?

    I now have 4 Burning applications which worked great at first.  Now however, none of them do.  The latest "Burn", now says it has an "authoring" problem.  How can I resolve this?

    hello, try the cure by animcam...
    http://forums.macrumors.com/showthread.php?t=493723
    Seems about the same problem here...
    http://sourceforge.net/projects/burn-osx/forums/forum/578948/topic/3264529

  • How can i include css in html file when exported

    I want the CSS should be included in the html file when exported, how is that posable?

    Muse follows its own structure and keeps HTML, CSS and JS code in separate files as and when possible. If you want all that code to be merged into the HTML file itself, then there is no option to force Muse to do that. You can however, add your own CSS code into the HTML page by adding the CSS using either the Insert HTML option or using the HTML for <head> option in Page Properties > Metadata.
    Cheers,
    Vikas

  • How do I get a text file from Photoshop  to work in the main sequence in pp?

    How do I get a text file to work properly in the master sequence. I moved it from Photoshop, which I learned to do from a tutorial, but when I move the animated text sequence to the master, it either isnt running, or it is scaled way too big. How do I get it to run in the main sequence?

    "Wont Work Here" !  Does not mean much.
    Are you having an audio or a video issue? 
    Looks like no video clip on the video layer above that section of audio.
    I am teaching myself this stuff completely on the fly
    I suggest you do the Basic Tutorials ( Adobe TV for example) in both Premiere Pro and PhotoShop.
    You need to be competent in the basics and fundamentals of these apps and that will also help you describe and discuss the issues.   Check the 'Products on this site....
    Adobe TV

  • How to include more than 12 files in a new PDF document?

    I have a Adobe PDF Pack, and when I click on crating a new PDF document, they say that I cannot combine more than 12 files...!
    And I want to have a document of hundreds of pages!
    Someone can help me?
    Pleeeeaaase!!!!!!

    Hi Hisami,
    Thank you very, very much!
    It is very useful what you explain.
    One only question, since I have the trying version of Acrobat Pro: how many files can you combine at the time with it?
    May be it depends on the files size.
    I tried yesterday to combine 50 files at the time and it just blocked everything...
    Thanks a lot!
    Have a very good day.
    Henric
    Henric Caldas
    30 rue de Belleville
    75020 Paris
    Home : +33.1.46.36.04.55
    Mobile : +33.6.59.08.02.27
    [email protected]
    Le 28 janv. 2014 à 22:48, "H.Spector" <[email protected]> a écrit :
    Re: How to include more than 12 files in a new PDF document?
    created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
    To combine more than 12 files into a single PDF file:
    1. Combine file 1 to file 12 then name it (combined 1 for example)
    2. Combine file 13 to file 24 then name it (combined 2 for example)
    3. Keep doing those steps #1 and #2 then combine "combined 1, Combine 2.....Combine 12).
    Another way is to use Adobe Acrobat. Please download Acrobat XI Pro Trial version from www.adobe.com or you can upgrade your subscription to Acrobat Plus(please see more information about Acrobat Plus subscription at https://www.acrobat.com/acrobatplus/en/home.html?trackingid=JPZKR).
    In Acrobat XI Pro:
    1. Launch Acrobat
    2. Select "File" menu > Create > Combine Files into a Single PDF
    3. Click "Add Files" button at top left corner
    4. After adding your files click "Combine" button at the bottom of the dialog.
    Thank you
    Hisami
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6062261#6062261
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6062261#6062261
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6062261#6062261. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How to read the whole text file lines using FTP adapter

    Hi all,
    How to read the whole text file lines when error occured middle of the text file reading.
    after it is not reading the remaining lines . how to read the whole text file using FTP adapter
    pls can you help me

    Yes there is you need to use the uniqueMessageSeparator property. Have a look at the following link for its implementation.
    http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_file.htm#CIACDAAC
    cheers
    James

  • How to append paragraph in text file of TextEdit application using applescript

    how to append paragraph in text file of TextEdit application using applescript and how do i save as different location.

    christian erlinger wrote:
    When you want to print out an escape character in java (java is doing the work in client_text_io ), you'd need to escape it.
    client_text_io.put_line(out_file, replace('your_path', '\','\\'));cheersI tried replacing \ with double slash but it just printed double slash in the bat file. again the path was broken into two lines.
    file output
    chdir C:\\DOCUME~1\
    195969\\LOCALS~1\\Temp\
    Edited by: rivas on Mar 21, 2011 6:03 AM

  • How to create and read text file using LabVIEW 7.1 PDA module?

    How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
    I attach my code here.
    Attachments:
    File_IO.vi ‏82 KB

    Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

  • How to read a whole text file into a pl/sql variable?

    Hi, I need to read an entire text file--which actually contains an email message extracted from a content management system-- into a variable in a pl/sql package, so I can insert some information from the database and then send the email. I want to read the whole text file in one shot, not just one line at a time. Shoud I use Utl_File.Get_Raw or is there another more appropriate way to do this?

    how to read a whole text file into a pl/sql variable?
    your_clob_variable := dbms_xslprocessor.read2clob('YOUR_DIRECTORY','YOUR_FILE');
    ....

  • How do I split a pdf file when the file size is too large?

    How do I split a pdf file when the file size is too large?  Thanks!

    With Adobe Acrobat.  It can also optimize your document to make the size smaller.

  • How do I read a winmail file when it is attached to an e-mail?  It doesn't open the right way in Excel on my iMac.

    How do I read a "winmail" file when it is attached to an e-mail?  It doesn't open in Excel on my imac, just code...help! 

    Winmail is for Windows only. Excel does not open emails.
    Ask the sender to send the file in a more up to date format.

  • How to scan/ read a text file, pick up only lines you wanted.

    I'm new to Labview, I trying to wire a VI which can read a text file
    example below:
    Example: My Text File:
    1 abcd
    2 efgh
    8 aaaa
    1 uuuu
    and pick out only any line which start with number 1 (i.e 1 abcd)
    then output these 2 lines out to a a new text file?
    Thanks,
    Palmtree

    Hi,
    How do you creat your text files? Depending on the programm, there is added characters in the beginning and at the and of the file. So here you will find a VI to creat "raw" text files.
    To debug your VIs, use the probs and breakpoints, so you can solve the problem by your self or give an more accurate description of it.
    There is also the VI that read a integer and two strings  (%d %s %s)
    Attachments:
    creat text file.vi ‏9 KB
    read_from_file.vi ‏14 KB

  • "Write to text file" when button is pushed?

    I want to use the function "write to text file" when a button is pushed, and write only once.
    The same goes for "read from text file

    Hello!
    Look at the following examples shipped with LabVIEW Professional and LabVIEW Full. Event structure example is not installed with Base package. 
    Open up 'Example Finder', click on the 'Search' tab, enter keyword 'events' and you fill find several examples. The ones of interest for you is 'New Event Handler.VI" and 'Old Event Handler.VI', where the first uses the event structure and the other uses the standard state machine architecture.
    Regards,
    Jimmie Adolph
    Systems Engineer Manager, National Instruments Northern Region
    Bring Me The Horizon - Sempiternal

Maybe you are looking for