How to include Quality Mgt View - Inspection Setup- InspType and Active
Friends,
I am working on MM data conversion. I am using STD RMDATIND program for this. I need to update fields in View Quality management, Inspection Type and Active check box. We could achieve this through Quality management -> Inspection Set up->click on New button. Here you can maintain the InspType and Active button. My problem is that I am not able to find the corresponding fields in program RMDATIND. Any suggestions will be greatly appreciated.
Thanks,
Sujith.
Dear YOGINI B. THORAT,
Thank you very much for correct suggestion,
We have resolved our issue of materials which were unable to move the stocks from quality stock to Unrestricted stocks,
Thanks,
Similar Messages
-
In QM view Inspection Setup data tab is not coming
Hi Friends
I want to assign inspection type to a material, plant combination but in QM view Inspection Setup data tab is not coming
Thanks & Regards
GajendranathHi gajendra,
Inspection set up data in QM view will appear only when you select quality view & maintain any plant releted data at the time of material creation .If you dont maintain any plant releted data then QM view then insp set up data will not appear. so please o through mm01 once again select QM view & maintain plant data, then next time insp set up data will appear. -
How do you get timeline view on imovie 08 and speed up a clip on imovie 08
how do you get timeline view on imovie 08 and speed up a clip on imovie 08
Hi
You can not - Nobody else (if not a very selected few at Apple dev.group)
TimeLine was lost in iMovie'08 and 09 and a very simple one re-introduced in iMovie'11
Speed Change - Was omitted in iMovie'08 - and returned in iMovie'09 - BUT has to be used in a certain way - the glider/slide if used - will destroy the audio (a Known BUG - in both iM'09 and iM'11) but use of pre-set fixed no. 25% 50% 100% 200% etc. will work.
Yours - still using iMovie HD6 - and LOVE it - Bengt W -
Hello,
The business process is to login and logout using Web HTTP/HTML protocol in LR 11.52; while I am trying to login to the website and after several attempts keep getting error-500. One of the suggestion was to copy the X_IDXSessionID to each request. Also applied correlation but keep getting the authentication error in the session.
My concern:How to include X-IDSSessionID in every header and copy the AuthToken from the previous response into the current request header?
I got the X-IDXSessionID and X-Allscripts-AuthToken from the snapshot response and request tab. Thanks.are you looping of this input with a for each?
/yourdata/details[1] should return always the first detail element.
or before the for each do an assing of this first detail element to "generic_details_var"
and use this var in every looping iteration (in an assign or as input for xquery) -
Hi,
the title says it all. I've got an airport extreme and two hard drives connected to it. My idea was to use one as my additional storage (say DISC STORAGE) and the other one as my backup drive (say DISC BACKUP). I would like to backup my mac AND DISC STORAGE together to DISC BACKUP using time machine. My mac has 256 GB HDD, DISC STORAGE is 1 TB big, DISC BACKUP 2 TB. So there are no space issues.
Problem: DISC STORAGE is not included in Time Machine's backup to DISC BACKUP. At the moment, only the mac is backed up to DISC BACKUP.
Does anybody know if and how I can include DISC STORAGE in the backup process?
By the way, DISC STORAGE is not listed in the "exclude from backup" list in Time Machine.
Thanks!
ArneUnforrtunately, Time Machine cannot backup from a network drive to another drive. Time Machine will only backup a Mac and a drive that is directly attached to the Mac, via USB or FireWire.
You will need to use an application like Carbon Copy Cloner or SupoerDuper to be able to backup from DISC BACKUP to DISC STORAGE. -
How to include limit switches into my control loop and how to access them through Labview
I'm developing a six degrees of freedom machine with servo motors,UMI flex6 and Labview-5.1.I was unable to access the limitswithes.So I would like to know the connections diagram,UMIflex6 board settings and the Vi's to be included in the program.please help me out in solving this problem.
Hi Kolakanuru,
Thanks for using our discussion forums. How you connect your limit switches depends on what type of motion board you are using. For example, if you look at the connection diagram for a PCI-7344, you can see that Forward Limit switches connect to pins 39, 45, 51, and 57. These will then pin out directly to the UMI. For the connection diagram for your particular motion control board, you can go to www.ni.com/manuals and pull up the necessary information. In regards to reading this in LabVIEW, the first thing you will want to check out is Measurement and Automation Explorer. In the interactive windows for your board, you can check the limit switch status there- Press your limit switch on and off and make sure that it changes the LED in MAX. Once that i
s all set, then you can go into LabVIEW and use the "Read Limit Status" VI which you can find in Functions>>All Functions>>NI Measurements>>Motion>>FlexMotion>>Motion I/O palette. Good luck with your application.
Regards
Dan
National Instruments -
How to change the display view of the records and modified into a row
I have a SQL which can count the condition(Bad,Poor,Worse) in a day and group it into a month and displays as follows:
YEARS MONTHS LV COUNTVAL
2009 Apr Bad 5
2009 Apr Poor 3
2009 Apr Worse 2
2009 Aug Bad 3
2009 Aug Poor 2
2009 Aug Worse 5
2009 Dec Bad 5
2009 Dec Poor 2
2009 Dec Worse 3
2009 Feb Bad 5
2009 Feb Poor 3
2009 Feb Worse 2
2009 Jan Bad 3
2009 Jan Poor 3
2009 Jan Worse 4
2009 Jul Bad 2
2009 Jul Poor 3
2009 Jul Worse 5
2009 Jun Bad 1
2009 Jun Poor 4
2009 Jun Worse 5
2009 Mar Bad 4
2009 Mar Poor 4
2009 Mar Worse 2
2009 May Bad 3
2009 May Poor 5
2009 May Worse 2
2009 Nov Bad 1
2009 Nov Poor 5
2009 Nov Worse 4
2009 Oct Bad 5
2009 Oct Poor 3
2009 Oct Worse 2
2009 Sep Bad 2
2009 Sep Poor 4
2009 Sep Worse 4
2010 Apr Bad 6
2010 Apr Poor 1
2010 Apr Worse 3
2010 Aug Bad 3
2010 Aug Poor 2
2010 Aug Worse 5
2010 Dec Bad 4
2010 Dec Poor 2
2010 Dec Worse 4
2010 Feb Bad 4
2010 Feb Poor 3
2010 Feb Worse 3
2010 Jan Bad 6
2010 Jan Poor 3
2010 Jan Worse 1
2010 Jul Bad 2
2010 Jul Poor 4
2010 Jul Worse 4
2010 Jun Bad 4
2010 Jun Poor 3
2010 Jun Worse 3
2010 Mar Bad 6
2010 Mar Poor 1
2010 Mar Worse 3
2010 May Bad 4
2010 May Worse 6
2010 Nov Bad 5
2010 Nov Poor 2
2010 Nov Worse 3
2010 Oct Bad 3
2010 Oct Poor 3
2010 Oct Worse 4
2010 Sep Bad 3
2010 Sep Poor 4
2010 Sep Worse 3The SQL that I am using:
select years, months, lv, countVal
from
select years, months, lv, count (lv) OVER (PARTITION BY years,months,lv) countVal from
SELECT x.years, x.months, x.days, x.lv
FROM airtest,
XMLTABLE ('$d/cdata/name' passing xmldoc as "d"
COLUMNS
years integer path 'year',
months varchar(3) path 'month',
days varchar(2) path 'day',
lv varchar(5) path 'value'
) as X
group by x.years, x.months, x.days, x.lv
order by x.years, x.months, x.days
group by years, months, lv, countVal
order by years,monthsThe problem for now is how to modify it to become in this format??
YEARS MONTHS Bad Poor Worse
2009 Apr 5 3 2
2009 Aug 3 2 5
2009 Dec 5 2 3
.........After modified, It will become something like this.
You can see the seperated data are group into a row in each month.
Thanks for help!!Thanks for you suggestion!
But it seems the order become quite strange after i used...
Belows are the display....
YEARS MONTHS BAD POOR WORSE SUM_BY SUM_PY SUM_WY
2009 Jan 3 3 4 39 41 40
2009 Feb 5 3 2 39 41 40
2009 Dec 5 2 3 39 41 40
2009 Nov 1 5 4 39 41 40
2009 Oct 5 3 2 39 41 40
2009 Sep 2 4 4 39 41 40
2009 Aug 3 2 5 39 41 40
2009 Jul 2 3 5 39 41 40
2009 Jun 1 4 5 39 41 40
2009 May 3 5 2 39 41 40
2009 Apr 5 3 2 39 41 40
2009 Mar 4 4 2 39 41 40
2010 Jan 6 3 1 50 28 42
2010 Nov 5 2 3 50 28 42
2010 Oct 3 3 4 50 28 42
2010 Sep 3 4 3 50 28 42
2010 Aug 3 2 5 50 28 42
2010 Dec 4 2 4 50 28 42
2010 Jun 4 3 3 50 28 42
2010 May 4 0 6 50 28 42
2010 Apr 6 1 3 50 28 42
2010 Mar 6 1 3 50 28 42
2010 Feb 4 3 3 50 28 42
2010 Jul 2 4 4 50 28 42
TO_DATE ( years || months, 'yyyyMon', 'NLS_DATE_LANGUAGE=English') ymI have tried to added this statement both in the "SELECT" or end of the sql (as the position of yours "order by"), It does not work... -
How to Include "all" header info when you Reply and ReplyAll
Using Mail 3.5, when I Reply or ReplyAll I need to have "all" header info included automatically (From, To, CC, Subject, Date) which does occur when Forwarding but not when Replying to one or all. A REAL issue in the corporate world. Is there any way to accomplish this???
Thanks,Did you ever get a reply to this question or did you manage to solve the issue in any way or shape? I am experiencing the same so eager to hear a solution.
Thanks! -
How to take a report for the assigned transaction and activity in a role
Hi Colleagues,
I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
Please suggest how to take this information.
BR,
JaiHi Jaikumar from the post :
I think you have reached the state of finding the USER to ROLE relationship
Take the output to an excel,
COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
This is one of the ways to do , there are many other ways to do it. -
How to send multiple Recipients using the mail.jar and activation.jar
hi!
could somebody help me. how do i send multiple Recipient using mail.jar. when i would input 2email address in to Recipient
(example: [email protected], [email protected])
i get a DEBUG: setDebug: JavaMail version 1.3.2
but if i send a single email it just works properly.
heres my code
import java.io.*;
import java.util.*;
import javax.mail.*;
import javax.mail.event.*;
import javax.mail.internet.*;
public class SendMail
public SendMail(String to, String from, String subject, String body)
//public SendMail(String to)
String message_recip = to;
String message_subject = subject;
String message_cc = "";
String message_body = body;
//The JavaMail session object
Session session;
//The JavaMail message object
Message mesg;
// Pass info to the mail server as a Properties, since JavaMail (wisely) allows room for LOTS of properties...
Properties props = new Properties( );
// LAN must define the local SMTP server as "mailhost" to be able to send mail...
//props.put("mail.smtp.host","true");
props.put("mail.smtp.host", "mailhost");
// Create the Session object
session = Session.getDefaultInstance(props, null);
session.setDebug(true);
try
// create a message
mesg = new MimeMessage(session);
// From Address - this should come from a Properties...
mesg.setFrom(new InternetAddress(from));
// TO Address
InternetAddress toAddress = new InternetAddress(message_recip);
mesg.addRecipient(Message.RecipientType.TO, toAddress);
// CC Address
InternetAddress ccAddress = new InternetAddress(message_cc);
mesg.addRecipient(Message.RecipientType.CC, ccAddress);
// The Subject
mesg.setSubject(message_subject);
// Now the message body.
mesg.setText(message_body);
// XXX I18N: use setText(msgText.getText( ), charset)
// Finally, send the message!
Transport.send(mesg);
}//end of try
catch (MessagingException ex)
while ((ex = (MessagingException)ex.getNextException( )) != null)
ex.printStackTrace( );
}//end of while
}//end of catch
}//end of SendMail
public static void main(String[] args)
//String t = "[email protected], [email protected]"; - this I think causes error
String t = "[email protected]";
String f = "[email protected]";
String s = "Hello World";
String b = "the quick brown fox jumps over the lazy dog";
SendMail sm = new SendMail(t,f,s,b);
}//end of main
}//end of class
could someone please help me im stuck-up with this. thanx!i need it ASAP
i am a beginner in java and jsp
Need to knw how can I parse the addresss field
Below
is the code
<code>
package
public class EMailBean {
private String smtp,username,password,from,bcc,subject,body,attachments,cc;
/*setter*/
public void setSmtp(String str){this.smtp=str;}
public void setUsername(String str){this.username=str;}
public void setPassword(String str){this.password=str;}
public void setFrom(String str){this.from=str;}
public void setTo(String str){this.to=str;}
public void setCc(String str){this.cc=str;}
public void setBcc(String str){this.bcc=str;}
public void setSubject(String str){this.subject=str;}
public void setBody(String str){this.body=str;}
public void setAttachments(String str){this.attachments=str;}
/*getter*/
public String getSmtp( ){return this.smtp;}
public String getUsername( ){return this.username;}
public String getPassword( ){return this.password;}
public String getFrom( ){return this.from;}
public String getTo( ){return this.to;}
public String getCc( ){return this.cc;}
public String getBcc( ){return this.bcc;}
public String getSubject( ){return this.subject;}
public String getBody( ){return this.body;}
public String getAttachments( ){return this.attachments;}
</code>
Session session = Session.getDefaultInstance(props, null);
session.setDebug(true);
try {
MimeMessage msg = new MimeMessage(session);
msg.setFrom(new InternetAddress(mail.getFrom()));
msg.addRecipients(Message.RecipientType.TO, InternetAddress.parse(to, false));
msg.addRecipient(Message.RecipientType.TO,new InternetAddress(mail.getTo()));
msg.addRecipient(Message.RecipientType.CC, new InternetAddress(mail.getCc()));
msg.addRecipient(Message.RecipientType.CC, new InternetAddress("[email protected]"));
msg.setSubject(mail.getSubject());
// Create the message part
BodyPart messageBodyPart = new MimeBodyPart();
// Fill the message
messageBodyPart.setText(mail.getBody());
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
// Part two is attachment
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(mail.getAttachments());
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName(source.getName());
multipart.addBodyPart(messageBodyPart);
msg.setContent(multipart);
msg.setSentDate(new Date());
Transport t = session.getTransport("smtp");
try {
t.connect(mail.getUsername(), mail.getPassword());
t.sendMessage(msg, msg.getAllRecipients());
} finally {
t.close();
result = result + "<FONT SIZE='4' COLOR='blue'><B>Success!</B>"+"<FONT SIZE='4' COLOR='black'> "+"<HR><FONT color='green'><B>Mail was successfully sent to </B></FONT>: "+mail.getTo()+"<BR>";
if (!("".equals(mail.getCc())))
result = result +"<FONT color='green'><B>CCed To </B></FONT>: "+mail.getCc()+"<BR>";
if (!("".equals(mail.getBcc())))
result = result +"<FONT color='green'><B>BCCed To </B></FONT>: "+mail.getBcc() ;
result = result+"<BR><HR>";
} catch (MessagingException mex) {
result = result + "<FONT SIZE='4' COLOR='blue'> <B>Error : </B><BR><HR> "+"<FONT SIZE='3' COLOR='black'>"+mex.toString()+"<BR><HR>";
} catch (Exception e) {
result = result + "<FONT SIZE='4' COLOR='blue'> <B>Error : </B><BR><HR> "+"<FONT SIZE='3' COLOR='black'>"+e.toString()+"<BR><HR>";
e.printStackTrace();
finally {
return result;
} -
SCOM 2012 - How does SQL MP "know" which instances are available and active?
Using SCOM 2012 R2 with Microsoft's SQL MP 6.5.1.
Getting alerts occasionally for issues with SQL instances which are later found to be not active any more or removed from the SQL server.
Can someone explain how the MP determines which SQL instances are available? Is it a matter of simply reading folder structures on the various mount points, reading registry? Much appreciated for any tips.SCOM SQL MP will using discovery to discovery SQL instance. Once the SQL instance is discovery, the SQL instance object persist in the database even though the SQL instance is removed.
Solution:
To clean up the objects you can run the Remove-SCOMDisabledClassInstance Powershell cmdlet. Then all the relationships that involve objects related to a disabled discovery is deleted.
Roger -
Inspection setup chkbox not checked while inspection details exists
i am facing a wierd problem.
i have craeted a MM01 bapi -->> using FM BAPI_MATERIAL_SAVEDATA.
it is working perfectly fine.
also to update the inspection setup in quality managment tab.
m using FM -->> BAPI_MATINSPCTRL_SAVEREPLICA.
here is the code snippet:
WA_VT_INSPECTIONCTRL-INSPTYPE = '03'.
WA_VT_INSPECTIONCTRL-MATERIAL = WA_DATATAB-MATNR.
WA_VT_INSPECTIONCTRL-PLANT = WA_DATATAB-WERKS.
WA_VT_INSPECTIONCTRL-IND_INSP_WITH_TSK_LIST = 'X'.
WA_VT_INSPECTIONCTRL-IND_INSP_BY_CHARAC = 'X'.
WA_VT_INSPECTIONCTRL-INSP_PERCENTAGE = 0.
WA_VT_INSPECTIONCTRL-IND_SKIPS_ALLOWED = 'X'.
WA_VT_INSPECTIONCTRL-IND_SINGLE_UNITS_POSSIBLE = 'X'.
WA_VT_INSPECTIONCTRL-AVE_INSP_DURATION = 0.
WA_VT_INSPECTIONCTRL-QUAL_SCORE_PROCEDURE = '06'.
WA_VT_INSPECTIONCTRL-IND_INSPTYPE_MAT_ACTIVE = 'X'.
WA_VT_INSPECTIONCTRL-PREFERRED_INSPTYPE = 'X' .
APPEND WA_VT_INSPECTIONCTRL TO VT_INSPECTIONCTRL.
CLEAR WA_VT_INSPECTIONCTRL.
CALL FUNCTION 'BAPI_MATINSPCTRL_SAVEREPLICA'
TABLES
RETURN = RET_INSP
INSPECTIONCTRL = VT_INSPECTIONCTRL.
this FM also ding well,
here is the wierd thing starts:
after BAPI_TRANSACTION_COMMIT:
when in MM03 I SEE AT QUALITY MANAGMENT VIEW -> INSPECTION SETUP CHECKBOX IS NOT CHEKCED
But when i click on inspection setup pushbutton,inspection details are displayed.
And after clicking yes on this inspection detail pop up window.
Inspection setup checkbox is checked .
I want inspection setup is checked initially.(no need to open the pop up window just to check the checkbox).what's you fininal solution for this problem? I also face same question
-
How to use QM- Inspection setup in STD RMDATIND program in LSMW
Friends,
I am working on MM data conversion. I am using STD RMDATIND program foe this. I need to update fields in View Quality management, Inspection Type and Active check box. We could achieve this through Quality management -> Inspection Set up->click on New button. Here you can maintain the InspType and Active button. My problem is that I am not able to find the corresponding fields in program RMDATIND. Any suggestions will be greatly appreciated.
Thanks,
Sujith.Hi Sujith,
By using RMDATIND Prog, u cannot update fields for Quality Management,
There is Stanadard Business Object for Inspection set up.
Business Object BUS1001004 Material inspection control
Method SAVEREPLICA Replication of QM inspect
Message Type MATQM Replication of QM inspect
Basic Type MATQM01 Replication of QM Inspect
You can update by using this BAPI.
Regards,
Sivaram.
P.S: Reward for satisfactory answers. -
Quality Management View in MM01
Hi all,
While extending material from one plant to another , how to capture Quality Management View .
RaviHi Ravi,
Check this link, this might help you.
Re: Quality Management
http://www.sap-img.com/sap-qm.htm
Regards,
Chandra Sekhar -
How to include WS-Security Header in the WSDL
hi
how to include WS-Security Header which have username and password as
i had seen the below link it deals with just hello world which is not using any Services(DBAdapter) is it possible to use DBAdapter as the steps present in the below link how to include WS-Security Header which have username and password
http://blogs.oracle.com/reynolds/2005/09/invoking_bpel_from_an_html_for.htmlAs Amir suggested, you may provide in the URL but I wouldn't suggest it though. You don't want to hard code the user ID and password within in the WSDL because it is a bad practice especially the user ID and password may be different in different systems and every time you change the password, you have to regenarate your WSDL.
May be you thought through this but just in case if you didn't
KK
Maybe you are looking for
-
I have InDesign CS5.5, v.7.5. I'm trying to open a rather large file with lots of images, but it says "Please upgrade plugins/latest version", but when I tried to update it with download 7.5.1 through Adobe Patch Installer, it keeps saying "update i
-
2 T520's Ordered, What are my Audio/Video Out Options
I'm super excited and can't wait to get my computer and my families, yes I did order two with the same config. I'm at a company that uses Lenovo and I have the T400 right now which was an upgrade from T60 which was an upgrade from T42 and was an upg
-
Photo sync bug with Aperture albums?
Hi, I think I have found a bug with how iTunes syncs photos across to my new (and until my number ports across, useless) iPhone. If you set it up that only selected Aperture albums are synced, like this; [ ] album1 [tick] album2 [ ] album3 [tick] alb
-
I have 180 imported stills in a composition. I have corresponding image sequences that I want to convert each still to. The stills are named "x-00001.jpg", and the other parts of the image sequence are in the same directory. How do I get AE CC to mak
-
Is it possible to access root folders in the finder window instead of using terminal