How to increase 255 column limit in hyperion financial reporting studio

how to increase 255 column limit in hyperion financial reporting studio

Check this knowledge article :
Best Practices for Hyperion Financial Reporting (FR) Report Design [ID 1196695.1]

Similar Messages

  • How to replace #MISSING with 0 in Hyperion Financial Report

    I am developing report in Hyperion Financial Reporting Studio. The report shows #MISSING for no data and does not look nice. I want to replace #MISSING with 0 (Like I did in SmartVIEW). However, I could not find a way to do that in Financial Reporting Studio.
    Thank you for any help in advance.

    To replace no data (#MISSING) in cells, type a value in the No Data text box.
    Refer: Page 191 of http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user.pdf
    HTH-
    Jasmine.

  • Hyperion Financial Reports Studio - Activex error 429

    Greetings Everyone,
    I have recently installed Hyperion Financial Reports Studio 11.1.2.1 on a 64 bit Windows 7 machine using the standalone installer (FinancialReportingStudio.exe)
    After the install, when attempting to launch the client we get the classic run-time error 429 for active x.
    I've had this problem before in previous engagements, and the solution was to run the config utility on the computer and the error would then go away.  The problem is that the standalone installer does not seem to setup/install the configuration utility on the client PC.
    Any suggestions on how to solve the problem?  Already tried running the HRrunant.bat and that didn't help.
    Thanks,

    Good to hear the issue is resolved ...
    However the update you gave contradicts the first update you gave when you started the thread...that it was a 32 bit machine (client)
    "I have recently installed Hyperion Financial Reports Studio 11.1.2.1 on a 64 bit Windows 7 machine using the standalone installer"

  • Hyperion financial reporting studio not responding

    hi all,
    I have Hyperion financial reporting studio "client" (Hyperion 9.3.1) installed in my local machine - windows 32 bit machine.
    The machine configuration is:
    P4 3.0 GHz and 1 GB RAM.
    When I launch Hyperion financial reporting studio with username , password and report server information the System performance parameter ( As found in task manager) goes following change:
    CPU usage:fluctuates between 45 - 100% which was initially 1%
    PF usage:jumps to 1.32GB which was initially 362MB
    Physical memory available : drops down from 762188(K) to 1728(K)
    application status: Not responding
    AND ULTIMATELY THE WINDOW OF FINANCIAL REPORTING STUDIO VANISHES .There is no error log created ??
    I cannot proceed further. Please help me out...
    Thanks in advance

    Please post these type of queries to Hyperion BI Workspace & Reporting module

  • Migrating Hyperion Financial Reports Studio Reports

    What is best Practice for Migrating Hyperion Financial Reports Studio Reports from a Production Environment to a test Environment?

    There was a similar question on another forum last week: Financial Reporting Studio Reports from production to Test
    If you are on version 11, I suggest Life Cycle Management.
    Cheers,
    Mehmet

  • How to get XML format output from Hyperion Financial Reporting

    Dears,
    We are using Hyperion Financial Reporting to replace FSG in fusion. I found that Hyperion FR report can be exported to html/excel/pdf format. However, I would like the report to export to xml format.It means I only need the xml data source.
    Anyone who knows how to get the xml format output from Hyperion FR, is there any avaiable API?

    I think if you export the report, you will be able to open the .des file in Notepad/Wordpad and see xml content.

  • Hyperion Financial Reporting Studio "Failed to Connect to Server"

    One of my report developers recently got a new laptop. Since then, she hasn't been able to open an existing report or create a new one. She can log into Financial Reporting Studio, but when trying to open an existing report or create a new report, she gets the error message "Failed to Connect to Server".
    We've tested using her laptop and using mine. We are both fine on my laptop. We both have same issue on her laptop. Therefore, we don't think it's a security/credentials issue.
    We've searched help documentation and other threads in this forum but haven't been able to find what we need.
    We suspect that file(s) are missing or something wasn't configured properly during the new install. Maybe the Planning ADM Driver?? Our company's tech support hasn't been able to help. This is a new implementation, the consultants are gone, and our IT staff isn't up to speed yet.
    Can anyone offer help as to what file/configuration could be the cause and exactly how to correct?
    Thanks.

    We had the same issue after installing the Financial Reporting Studio client.
    If you run the batch script HRRunAnt.cmd in the directory C:\Hyperion\products\biplus\install\bin after installation this fixes the problem.

  • POV in Hyperion Financial Reporting Studio and Workspace

    Hi!
    I have the following problem.
    I create a report in Hyperion FinReporting Studio, choose required members in POV. Save report.
    Then I open it in Workspace and sometimes my chosen POV crushed: sometimes there are no chosen members, sometimes there is a free space.
    How can I fix it? (It's not acceptable to choose POV as a prompt all time). Is it a bug?
    Thanks.
    Natallia

    Hi Natallia,
    well first there are two type of POV in Hyperion financial reporting.
    1. User POV
    2. Grid POV
    If you are never getting the USER POV in workspace then it may be that "Preview User Point of View" is off.
    Just check it under FIle-->Preferences-->Financial Reporting in workspace.
    If you want some default selection in your reports all the time, you should use Grid POV instead of USer POV.
    Thanks and Regrads,
    Rahul

  • Hyperion Financial Reporting Studio: question re expansion across grids

    Hello all,
    I have built a report in Financial Reporting Studio that consists of 3 grids: 1 for working version, 1 for reconciliation version x and 1 grid for the variance between the two.
    My row dimension is entity, which has been set to "allow expansions".
    I have been asked to set it up so that if the user expands a row in the first grid, the same row is automatically expanded in the second and third grid, showing the user the same members across grids (and therefore across versions).
    Is this possible and if so, how do I set this up?
    Thanks for your help,
    Eva

    Yes it is possible to have same row selected in grid 1 displayed in multiple grids.
    Below steps will also retrive same data, add a formula row (or column also) say in Grid 2 having formula :-
    Grid1.row[1] ,where you want to dispaly same data of Grid 1, row 1 across Grid 2 in some particular row say row 1.
    Then modify the heading for row 1 (in Grid 2) by adding text functions to retrieve the member names of grid 1.
    Select the heading for row 1, on the Heading Row Properties sheet, select Custom Heading. In box, enter the MemberName function to retrieve the member name from row 1 of Grid1.
    The function syntax is
    *<<MemberName("Grid1", 1, "DimensionName")>>*
    If you want only member name then adding text function to desired location heading properties will work.
    Cheers,
    Vikas Naidu.

  • Hyperion Financial Reporting Studio - usage log and exporting criteria

    Hello, is there a way to run a usage log for the reports that we have in Financial Reporting Studio?
    In addition, can I export the report criterias? I'm looking at potentially archiving some reports we have out on the server that is not currently being used. Thanks much!!!

    The FRReportSrv log file under Hyperion\logs\BIPlus gives you the report usage tracking. I am not the developer of our process and I am not techie at all, but we have a process that scans the log files, parses the log files and load it into Oracle. Then thru Oracle Apex, we develop reports to track FR usage.
    I am not sure what you mean by report criterias. Do you mean, for example, if the report is not used for over 5 months, you would like to archive it? If you can create a similar report like the one I described above, then yes, it would help you to determine the idle reports, but I am not sure if you can automatically archive the reports. I think it would have to be manual, where you would use the export function on Workspace to archive your report.
    Hope this helps.
    Cheers,
    Mehmet

  • Issue with hyperion financial reporting studio

    hi friends,
    I am using hyperion 9.3.1 .I am able to open financial management studio as an admin user but when i drag and drop a grid in a report it gives an error stating it is unable to fetch the list of data sources from the database repository.I have configured 1 server as app and report server and another one as oracle database server using ip addresses.Checked everthing including host file but nothing works.Thanks in advance

    Kamal,
    We were also facing this same issue. But i was able to solve it. Actually what happened was i remember registering Reporting and Analysis using the same database reusing the same old repository. And after that this issue/error came up.
    So i took the back up of repository database and also luckily still on testing environment and had not much to loose. So i reconfigured the relational database dropping all the databases. It resolved the issue.
    But why it happened and the real cause is not know even Oracle support was unable to answer this.

  • Hyperion financial reporting studio hit an unexpected error occurred

    Hi everyone,
    i do not know whether this is the right place to post this query but gave a try.
    Here is my problem:
    This is newly setup client PC with financial reporting. When trying to login to the FR, it prompted "*An Unexpected Error Occurred*".
    Log showed the following error:-
    11-08 08:52:28 ERROR HRFoundationClient     cannot establish binding
    com.hyperion.reporting.util.HyperionReportException: cannot establish binding
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.rejoinFoundationSession(Unknown Source)
         at com.hyperion.reporting.hrfoundation.ReportStoreManagerImpl.createFoundationSession(Unknown Source)
         at com.hyperion.reporting.client.ReportClient.<init>(Unknown Source)
         at com.hyperion.reporting.client.DesignerManager.getRemoteConnection(Unknown Source)
         at com.hyperion.reporting.javacom.DesignerManagerComImpl.getRemoteConnection(Unknown Source)
    11-08 08:52:29 ERROR HRFoundationClient     
    java.lang.NullPointerException
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.getTRCPService(Unknown Source)
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.getRoot(Unknown Source)
         at com.hyperion.reporting.hrfoundation.ReportStoreManagerImpl.getRoot(Unknown Source)
         at com.hyperion.reporting.javacom.ReportStoreManagerComImpl.getRoot(Unknown Source)
    11-08 08:52:29 ERROR HRFoundationClient     An unexpected error occurred.
    com.hyperion.reporting.util.HyperionReportException: An unexpected error occurred.
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.getTRCPService(Unknown Source)
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.getRoot(Unknown Source)
         at com.hyperion.reporting.hrfoundation.ReportStoreManagerImpl.getRoot(Unknown Source)
         at com.hyperion.reporting.javacom.ReportStoreManagerComImpl.getRoot(Unknown Source)
    11-08 08:52:29 ERROR HRFoundationClient     
    Kindly let me know if there is any solution for this.
    Thanks alot.

    If this is a client specific issue only with FR Studio continuing to log you in successfully on the server(if it happens to be Windows) or if other client PC also allow a successful login,then you can try a couple of things.
    1.Telnet the following ports from the client to the server and ensure connectivity--6800 to 6805,8200,8299,these are default ports,if you are using customized ports then ping the appropriate port numbers
    2.If telnet to all of these ports is successful,then copy the HReports.jar file from the server from under the products/biplus/lib directory and replace the same file on the client machine,the location is going to be the same,ensure you back up the HReports.jar file on your machine before replacing it if case you need to revert back
    Let me know

  • Hyperion Financial Reports Studio Error. Max No of connections exceeded.

    I have encountered an error in FR Studio, it says Max No of Connections Exceeded.
    It occured twice in this month, everytime it happens we need to restart Reporting and Analysis Framework. Can someone suggest where can I increase the max no of connections allowed?

    Ok...My bad..
    You will have tun serviceconfig.sh under Hyperion_Home\products\Foundation\workspace\bin to bring up GUI,then From the menu available you will see Remote service configurator,select that and provide the credentials.After you login,there should RM1 and SB1.You will have to go o properties of RM1 and SB1 and then increase the connection.Restart is required for this to take affect.
    Let me know

  • Page Setup - Hyperion Financial Reporting Studio

    Hi All,
    I have a balance sheet report which has Balance sheet items at the row level and the 3 Years * 4 Quarters at column level. I want to display this report in one page, where the whole page should occupy. But if Iam selecting both the check points for Fit to width and Fit to length, I am getting all the columns but the whole report is displaying in half page. But I want report to display in the full page. can any one please help me on this. i have to submit the report by tomorrow.
    Thanks a lot in advance....

    This is going to be trial and error on your part until you get the results.
    1. If you un-check both fit-width and fit-length, is it going to two pages in width or lenght?
    2. If is going second page in width wise, only check fit-width and keep un-check length.
    3. Try the same for length.
    Venu

  • Hyperion Financial Reporting Studio Issue

    Hi,
    We have an issue with Hyperion FRS, where the users other than Admin are not able to see the reports. When they try to open the reports the following error is displayed:
    "1012: Report contains an invalid grid. The following dimension(s) could not be found: <Dimension Names>"
    We refreshed the security and also synchronized Essbase Security with shared services. When this did not remove the error, we restarted all the Hyperion services, but there was no change in the error.
    When an Admin creates a report using FRS he/she is able to see all the dimensions, but when a provisioned user logs in to create a report, none of the dimensions are visible.
    Any help to solve the issue is much appreciated.
    Thanks
    Priyanka

    Good Morning Mars,
    I had looked at that document and even tried changing the data base connection. I also created a new Data base connection and assigned it to the reports but still it gives me the same error.
    This problem is only with one plan type in the application and the other plan types work without any issues.
    On further investigation we have noticed that the issue is with connecting to the Plan Type via Essbase connections. We tried to create a report in Web Analysis studio using an Essbase Connection to the plan type but even there we couldn't see the dimensions.
    Thanks,
    Priyanka
    Edited by: Priyanka B on Jul 16, 2009 11:36 PM

Maybe you are looking for