How to Increase Bar Code width ?

Dear All,
I am printing a Bar code and I am getting its width depending upon size of data .
I am using CODE 128 and I am passing 854540008700547878 .
I want to fix the bar code width 9cm ..Currently I am using 6cm width and 150 height .
And If I increase the width more than 6cm then I got only charater 854540008700547878 not bar code.
Help wil be appriciated.
Regards
Steve

Hi ,
Create your own bar code type rather than using system Bar Codes , if the length of your code doesn't fit with the standards available under SE73 . There you can define your own sizes as per your requirement , If you have a stands logic ,for example production order type Z001 should be in 15 lengthy code , then put a condition in the smart form to facilitate it , like wise you could use different lengthy bar codes in single form .
I hope this is what you meant by your treat.
Good Luck .
Cheers ,
Dilum

Similar Messages

Obiee 11g graph how to increase bar width

Hello,
obiee 11g: -> bar graph: how to increase bar width ?
Thank you,
Ark

Hi ,
Create your own bar code type rather than using system Bar Codes , if the length of your code doesn't fit with the standards available under SE73 . There you can define your own sizes as per your requirement , If you have a stands logic ,for example production order type Z001 should be in 15 lengthy code , then put a condition in the smart form to facilitate it , like wise you could use different lengthy bar codes in single form .
I hope this is what you meant by your treat.
Good Luck .
Cheers ,
Dilum

How to Print Bar codes in SAP script.

Hi Experts,
Could you please tell me how to print bar codes through sapscript (the steps basically)?
<<text removed by moderator>>
Thanks in advance,
Suchi.
Edited by: Matt on Nov 13, 2008 2:04 PM - do not use ASAP or urgent.

hi,
check these.
[https://forums.sdn.sap.com/click.jspa?searchID=18572128&messageID=4724540]
[http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]

How to display BAR-CODE through ABAP report

Hi,
Could you please help me, how to display BAR-CODE through the ABAP report.
I am writing below code, but BAR-CODE is not displaying on report.
           PRINT-CONTROL FUNCTION 'SBP01'.
            WRITE: 20 BAR_CODE1 NO-GAP.
           PRINT-CONTROL FUNCTION 'SBS01'.
Regards,
SSRAJU.

Hi RAJU,
you can see this forum link and its sub-links, here it is clear about it.
Re: Barcode printing on report
Thanks & Regards,
Dileep .C

How to find bar codes and mails to send clients in smartforms

HI friends,
How to find bar codes in smartforms and also how to send mail to the client. I have developed one object in smartforms, but i don't know how to send maill to the client. Pls help me........................
Thanks in Advance.
Saradhi.

Hi!
Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Regards
Tamá

How to use Bar code field in Item master

Hi Experts
I want to know that How to integrate Bar code scanner data with SBO. Bar code contain many information like price, serial no., description etc . For example I want that when I read a barcode by barcode scanner it automatically update itemcode, description , price and serial no.
Thanks
regards
Gorge

Hello Gorge,
A barcode would ideally contain only an identification code and not other information. All such information like price, etc. should be fetched from a database, after reading the barcode, and identifying the item.
You can simply enter the barcode in the Item Master Data and than use the barcode field to identify the item in sales / purchase documents instead of itemcode or itemname.
Rahul

How to create Bar code

Hi,
How to create Bar code?
Explain the steps.

Hi,
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
<b>To Create a Bar code Prefix</b>
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Regards,
Padmam.

How to install bar code printer.

Dear All,
A issue in my company that i have to install BAR code printer.But i dont have any idea how to install BAR code in sap..AS i m the BASIS guy this is the first time i m facing this issue...plz tell me how to resolve this...
Regard's

Hi,
yes, same way as you doing for other printer in SPAD
just select your device from device type in Device attribute
then select your appropriate host spool access method and host printer.
SE73 is use for font maintenance which are use in SAP script .
also check following forum to define printer
SAP prints from Suse Linux OS
regards,
kaushal
Edited by: Kaushal Malavia on Jun 20, 2008 6:24 PM

How to increase the spool width in ECC 6.0

Hai,
I am executing Z report in back ground mode , finally the output can see in SP01 t.code, in this output I am getting only max 10 columns out of 20 columns of the report. How I can increase the output width in SP01 t.code to see all columns data .
OR
Can u suggest any note which will help to me in ECC 6.0
Thank u in advance.
Ramesh

Hi Ramesh Babu no reposts plz..
How I can increase the output width in SP01 t.code to see all columns data

How to add bar code in report(se38 develop)

hi all,
as a existing abap report which print out the report with a lot of special logic, so i want Use abap report program to print bar code instead of smartforms . how to process?
thanks.
james

Hi Kumar,
You cannot write custom code (0% coding) in an Report Writer/Painter report. The code is generated by SAP while generating the Report group. The only place in a report writer report where you can write very minimal code is at varables level or formulas inside reports.
At the report group header level, there is provision to provide authorization group. Try that.
Regards,
Subin John.
Edited by: subin john on Mar 24, 2011 10:36 AM

How to print BAR CODE in SAP SMART FORMS

Hi,
I want to print inspection lot's BAR CODE in the smart form, but i dont know the way how to print this into the smartform.
if anyone have any idea, please suggest me how to print this as it is urgent for me to complete the object.
Thanks in advance.
Best Regards,
Abnish Jain

Hello Abnish,
Welcome to SDN.
We are able to print barcodes from smartforms. Doing this way, we print barcodes on laser printers.
We are also printing from sap to zebra printers using two ways:
1. Download the data to an excel sheet, then creating a macro that opens the printer port and sending the commands to the printer through this "file". All this is done via vb script provided with excel)..
2. The second way is creating a vbscript (an ascii file from sap) with the printer commands and then runing it using ws_execute.
You need a barcode reader to read the barcodes, and this scanner acts like a keyboard, it sends the data scanned to the active field on screen. (which might be a notepad, word, excel or an input field or ... ).
From 4.6c on, you can use smartforms to print barcodes without buying any barcode.dll software nor hardware extention like Bardimm on any laser/inkjet printer (Please Note that I haven't mentioned Zebra printers here!). To do this, you have to create a smartstyle -> character format with the desired barcode font (defined within sap). Then in the smartform, create a window, put the field and associate it the character format. That's all (I mean, that's all we do at least :-). I think, you have to consider the barcode specifications before sending the barcode value to the smartform (Just an example, if you're using 3 of 9, the code should start and end with an asterisk - '*' -) We're printing an interleaved 2 out of 5 barcode in our invoices due to a legal requirement, and we did it this way.
3. If you have a barcode scanner, then you should not need reading the barcode into an ascii file to get the data read in an standard or custom screen field. You can read it directly to the field you want. (unless... you have complex data coded in the barcode - for example if you're using an ean-ucc 128 compliant code and you're sending several fields in a single code ... In this case, an interface is almost mandatory because you must interpret the data fields according to the ucc standard, split the code into several fields .... and .... pure programming logic ).
To put it clear: if you have to read, for example, a barcode that holds the legal number of an invoice using a barcode scanner and this number should be sent to migo-> bktxt then you don't need an interface. The scanner itself acts like a fast operator entering the characters using a keyboard and filling in the field.
We're reading barcodes in several places (when we finish each pallet, when we receive an invoice, and so on. Each case is a different screen. We arent using an ascii file to read these barcodes. Furthermore, we read the invoice legal number into migo bktxt field (Head Text).
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Regards
Naren

How to increase a column width in numbers

Hello,
Is there a way to increase the column width of a numbers table by using a short cut.
In a few words is there any shortcut to increase or decrease the size of cells and columns?
Something like command+?
Regards,
Jonathan M.

No key commands are available. You can select the table then use the "Table Formatter":
These controls will apply to the items selected. If you have one column highlighted then you can change the width of that one column. If you select all columns then this control will apply to the selected columns.
you can also hover the cursor over the dividers between columns (the lines in the header... the lines between, for instance, the "A" and the "B"). The cursor will change to a vertical bar with a horizontal line with left right arrows, then click and drag as needed. Similar for rows.

How to implement bar code in Unix environment - EBS 11.5.8 ?

Hi All,
I need to implement bar codes in an AR Invoice in Unix environment. I have barcode.pfa that is the font file. Is the equivalent file from ttf file in windows environment.
I have read different papers in metalink that say that for example the name of the directory is this /usr/lib/X11/fonts/type1, but in my AIX server I haven't found something similar like this.
I wrote this statement in order to find the directory but I didn't find it.
find . -name fonts -print (fonts is the name of the directory)
Can you help me?
Best Regards,
Mariano.-

Hi Hussein,
I've read Note: 466531.1 - How To Implement An AFM / PFA Barcode or MICR Font Within A UTF8 EBS Instance. It says that I have to
copy the Barcode.pfa to the ORACLE_HOME directory. However, in this directory I don't have another pfa or ttf file, so how can unix relate the font?
Best Regards,
Mariano.-

How to programming bar code by java?

hi,
Does anybody know how to write programming to translate the charactor( such as num or char) into bar coding and how to translate the barcode back into charactor by java?

Hello,
Is it possible you could post all of teh object code for printing bar codes? Thanks.
Ok ... it's been about 4 years since I'd written this,
so there may be better ways of doing it now
(especially since jsk1.4 now allows you to draw
directly to screen!)
1) I created an object extending Canvas
2) In my paint method, I needed to draw the code & the
numbers below the code:
public void paint(Graphics g)
// calculate text length & draw the barcode
num = text.length();
length = ((3*wide)+(6*narrow))*(num+2) +
+ (num+1)*seperate;
DrawBarcode(g);
3) In the DrawBarcode method
I drew rectangles where I needed the barcodes (ie:
g.fillRect) - making sure that there was spacing
required ... which depends on the barcode you're
using.
Do you have any specific questions?

How to print bar codes in sap script and smartform

bar code sheet to print for particular customer when the
transfer order is created.

Hi,
You create a bar code or change a bar code in the font maintenance transaction (transaction SE73). To do this, proceed as follows:
○ Start transaction SE73, and choose System Bar Codes ® Change.
○ If you create a bar code, the system asks whether you want to use the new bar code technology or traditional system bar codes. Choose New.
You can enter a name and a description for the bar code. Note that the name must begin with a Zto avoid conflict between your bar codes and the standard bar codes.
2. If you have created a new bar code, you must now add this to a Smart Style as a character format. For information about this, see the section Maintenance of Styles with the Style Builder and its subsections in the Smart Forms documentation.
If you have only changed the bar code, continue with the next step.
3. You can now select text in Smart Forms and choose the corresponding style with the bar code as the character format for this text.
4. You can then print the bar code.
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10581664&messageID=3321556
Check the pdf below..
http://www.sap-press.com/downloads/h955_preview.pdf
Regards
Kiran

How to Increase Bar Code width ?

Similar Messages

Maybe you are looking for