How to increase built-in cisco vpn peer response timer?

Hi,
I use OS x in-built cisco vpn client to connect to work VPN.
The VPN server, or perhaps the radius server, takes a long time to return a response. OS X always try for 10 seconds, then drop the conneciton when no response from the remote peer. When I use cisco vpn client on a windows machine, the vpn client has a setting to allow for 90 seconds remote peer response time. It works fine using cisco vpn client.
I prefer to use os x as my primary working environment, so I need to fix this problme. My question is how to increase the phase 1 & 2 timer for vpn under 10.6.7. I have tried to change racoon.conf phase 1 & phase 2 timer, but it made no difference. OS X only try for 10 seconds.
Any ideas? (besides asking work people to fix the server or radius problem)
Thanks
jmsherry123

i have the same problem ... certificate is imported in keychain, but cant select it when setup vpn connection

Similar Messages

How to increase Bandwith using Cisco Radios.

We currently have Aironet 1310's that link two buildings together. We recently bought two Aironet 1142's with the hope to use them to increase bandwith between buildings.
We realize a Controller is needed too, to implement the 1142's which we haven't bought yet... and the 1142's are more for indoor than out.
First, can the 1142's be used to link the buildings together if we aim them via windows, or put them in a weather proof enclosure? Everywhere we looked we didn't see any 802.11n devices for outside...
Second: or is it better to buy more 1310's...and somehow multilink them together adding bandwidth?
The goal here is to increase bandwidth, of course.
Thanks,

First, I think this question was better in the wireless subsection rathen than switching :-)
The 1250 is a better choice than 1140, because it has external antennas and that's what you want for a bridge. 1140 doesnt' support bridge setup.
Moreover both 1250 and 1140 can work as standalone. Check on cisco.com, you will see IOS software for both those APs.
1250 is indeed a good way of increasing bandwitdh. If you go the 1310 way you can only have 3 of them (using all 3 available channels : 1,6,11) and I discourage building them in eterchannel as people are tempted to.
Hope this helps,
Nicolas
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

How to increase no of boolean checklist at run time???

Hello All,
I am reading certain names from excel file and storing in an array. And if my array contains 10 strings(Names) then it should create ten Boolean ticks and that name should be given to them. I have done programming but every time it creates only one boolean and all names are given to same boolean check. Is there any other method???
I am attaching my program.
Thanks in advance...
Pals
Solved!
Go to Solution.
Attachments:
Untitled 2.vi ‏10 KB

Your array of Boolean ref is an array to the same single Boolean. Not an array of ref to multiple Boolean.
You can't create Boolean controls on the fly so you must use another method.
I would use a tree control with check box symbols.
Omar
Omar
Attachments:
Untitled 2 (8.6).vi ‏19 KB

Kernel panc & Cisco VPN client

Can someone take a look at the below and tell me if the Cisco VPN client is crashing my system? Thanks.
Interval Since Last Panic Report: 1353403 sec
Panics Since Last Report: 1
Anonymous UUID: 847B0480-8E72-4988-862B-D1FCA722F3BB
Tue Oct 6 09:47:56 2009
panic(cpu 0 caller 0x2a6ac2): Kernel trap at 0x002929e6, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x0829a2ec, CR3: 0x00100000, CR4: 0x000006e0
EAX: 0x46a95b84, EBX: 0x00003b78, ECX: 0x000000af, EDX: 0x000005a4
CR2: 0x0829a2ec, EBP: 0x5bd4be68, ESI: 0x0829a2ec, EDI: 0x46a95e6c
EFL: 0x00010216, EIP: 0x002929e6, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5bd4bbf8 : 0x21acfa (0x5ce650 0x5bd4bc2c 0x223156 0x0)
0x5bd4bc48 : 0x2a6ac2 (0x590a50 0x2929e6 0xe 0x590c1a)
0x5bd4bd28 : 0x29c968 (0x5bd4bd40 0x50 0x5bd4be68 0x2929e6)
0x5bd4bd38 : 0x2929e6 (0xe 0x5bd40048 0x10 0x5c730010)
0x5bd4be68 : 0x5c7383e5 (0x5bd4bed0 0x5bd4becc 0x5bd4bed4 0x5bd4bed8)
0x5bd4bef8 : 0x31772d (0x0 0x8247604 0x2 0x5bd4bf74)
0x5bd4bf68 : 0x317b37 (0x0 0x5748ee00 0x0 0x7a6442c)
0x5bd4bfc8 : 0x29c68c (0x7a64404 0x0 0x29c69b 0x7be07a8)
Kernel Extensions in backtrace (with dependencies):
com.cisco.nke.ipsec(2.0.1)@0x5c736000->0x5c7a4fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10B504
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 2747345949935
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0x556e2000, size 0x12288) - last unloaded 127144562322
loaded kexts:
com.cisco.nke.ipsec 2.0.1
com.vmware.kext.vmnet 2.0.6
com.vmware.kext.vmioplug 2.0.6
com.vmware.kext.vmci 2.0.6
com.vmware.kext.vmx86 2.0.6
com.Logitech.Control Center.HID Driver 3.1.0
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 32472308361
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.GeForce 6.0.2
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AirPort.Atheros 411.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AppleIRController 161
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleLPC 1.4.6
com.apple.driver.AppleBacklight 170.0.2
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.driver.Oxford_Semi 2.5.0
com.apple.iokit.SCSITaskUserClient 2.5.1
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.1f7
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.nvidia.nv50hal 6.0.2
com.apple.NVDAResman 6.0.2
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.AppleProfileFamily 40
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.iokit.IONetworkingFamily 1.8
com.apple.driver.CSRUSBBluetoothHCIController 2.2.1f7
com.apple.driver.AppleUSBBluetoothHCIController 2.2.1f7
com.apple.iokit.IOBluetoothFamily 2.2.1f7
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.5.1
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.0
com.apple.iokit.IOFireWireSBP2 4.0.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.1f7, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2120BH, 111.79 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc525, 0x1a200000
FireWire Device: OEM ATA Device 00, G-TECH, Up to 800 Mb/sec

I had the same problem, and I think Cisco VPN client causes crashes in SL ( I had at least 3 crashes everyday) after uninstalling Cisco VPN client I don't have crashes anymore
for uninstalling :
1- open terminal
2-cd /
3-type cd /usr/local/bin ( hit return)
4-type ls and hit return ( to be sure that vpn_uninstall is there)
5-Type sudo ./vpn_uninstall ( hit return)
6- type your admin pass.
7- for the question type yes( hit return)
8- do the same as 7
then your good to go
for using built-in cisco vpn in snow leopard follow the instructions of this url
http://erbmicha.com/2009/09/07/how-to-cisco-vpn-with-snow-leopard-via-pcf-file/

Cisco VPN Client causes blue screen crash on WindowsXP Pro (Satellite M30)

Hi there,
I've got a Satellite Pro M30 running Windows XP Professional.
After starting a vpn Tunnel via a Cisco VPN Client (Version 4.6 and 4.7) the system crashes with a blue screen.
I can see that the key exchange is successful, but immediatly after the vpn connection gets established Windows XP crashes with a blue screen.
Has anyone an idea, how to solve this problem?
Maybe by device driver update? And if so, which driver should be updated?
Kind regards,
Thorsten

Hi R2D2 (and anyone else)!
1st of all (concerning your link) - I'm not using the wireless adapter.
I am connectet via 100Mbit via network-cable to my hub (all RJ45 TP Cat.5)
I found several other Notebook users by google'ing who have the same problem different vpn-clients but most of them with a centrino processor inside the notebook.
Almost all of them solved the problem by installing new drivers. But I can't use driver-patches from other Notebook to fix my Toshiba Drivers.
What could help is information about which driver is responsible for the crash by vpn clients on centrino notebooks. Maybe there is an Intel driver for it, but when I do not know which one causes the problem it's like seeking a needle in a haystack... :(
Disabling ALL other network devices (wireless, 1394-network adapter, modem, etc.) did not solve the problem.
I used the Cisco VPN clients several times on my old Compaq Notebook without any problems, but here it just doesn't work.
An idea which driver should be updated is kindly welcome!
Thank you, Thorsten

Cisco vpn connect problem with 3g dongle

Hi,
I am trying to connect cisco vpn but every time i am getting following error while trying to connect from huawei 3g usb dongle in win8. for win7 it works fine with no issue. Also the problem is only form datacard, form lan and wireless interaface i can easily connect to vpn without any issue. Any help/idea/suggestion highly appreciated?
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.2.9200
25     08:06:46.846 12/25/13 Sev=Info/4    CM/0x63100002
Begin connection process
26     08:06:46.848 12/25/13 Sev=Info/4    CM/0x63100004
Establish secure connection
27     08:06:46.848 12/25/13 Sev=Info/4    CM/0x63100024
Attempt connection with server "116.68.208.113"
28     08:06:46.849 12/25/13 Sev=Info/6    IKE/0x6300003B
Attempting to establish a connection with 116.68.208.113.
29     08:06:46.855 12/25/13 Sev=Info/4    IKE/0x63000001
Starting IKE Phase 1 Negotiation
30     08:06:46.858 12/25/13 Sev=Info/4    IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 116.68.208.113
31     08:06:47.145 12/25/13 Sev=Info/4    IPSEC/0x63700008
IPSec driver successfully started
32     08:06:47.145 12/25/13 Sev=Info/4    IPSEC/0x63700014
Deleted all keys
33     08:06:52.144 12/25/13 Sev=Info/4    IKE/0x63000021
Retransmitting last packet!
34     08:06:52.144 12/25/13 Sev=Info/4    IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
35     08:06:57.144 12/25/13 Sev=Info/4    IKE/0x63000021
Retransmitting last packet!
36     08:06:57.144 12/25/13 Sev=Info/4    IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
37     08:07:02.145 12/25/13 Sev=Info/4    IKE/0x63000021
Retransmitting last packet!
38     08:07:02.145 12/25/13 Sev=Info/4    IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
39     08:07:07.145 12/25/13 Sev=Info/4    IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=97205EA6A12866F0 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
40     08:07:07.645 12/25/13 Sev=Info/4    IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=97205EA6A12866F0 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
41     08:07:07.645 12/25/13 Sev=Info/4    CM/0x63100014
Unable to establish Phase 1 SA with server "116.68.208.113" because of "DEL_REASON_PEER_NOT_RESPONDING"
42     08:07:07.645 12/25/13 Sev=Info/5    CM/0x63100025
Initializing CVPNDrv
43     08:07:07.645 12/25/13 Sev=Info/6    CM/0x63100046
Set tunnel established flag in registry to 0.
44     08:07:07.645 12/25/13 Sev=Info/4    IKE/0x63000001
IKE received signal to terminate VPN connection
45     08:07:08.146 12/25/13 Sev=Info/4    IPSEC/0x63700014
Deleted all keys
46     08:07:08.146 12/25/13 Sev=Info/4    IPSEC/0x63700014
Deleted all keys
47     08:07:08.146 12/25/13 Sev=Info/4    IPSEC/0x63700014
Deleted all keys
48     08:07:08.146 12/25/13 Sev=Info/4    IPSEC/0x6370000A
IPSec driver successfully stopped
49     08:19:59.202 12/25/13 Sev=Info/4    CM/0x63100002
Begin connection process
50     08:19:59.202 12/25/13 Sev=Info/4    CM/0x63100004
Establish secure connection
51     08:19:59.202 12/25/13 Sev=Info/4    CM/0x63100024
Attempt connection with server "116.68.208.113"
52     08:19:59.202 12/25/13 Sev=Info/6    IKE/0x6300003B
Attempting to establish a connection with 116.68.208.113.
53     08:19:59.202 12/25/13 Sev=Info/4    IKE/0x63000001
Starting IKE Phase 1 Negotiation
54     08:19:59.218 12/25/13 Sev=Info/4    IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 116.68.208.113
55     08:19:59.656 12/25/13 Sev=Info/4    IPSEC/0x63700008
IPSec driver successfully started
56     08:19:59.656 12/25/13 Sev=Info/4    IPSEC/0x63700014
Deleted all keys
57     08:20:04.656 12/25/13 Sev=Info/4    IKE/0x63000021
Retransmitting last packet!
58     08:20:04.656 12/25/13 Sev=Info/4    IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
59     08:20:09.656 12/25/13 Sev=Info/4    IKE/0x63000021
Retransmitting last packet!
60     08:20:09.656 12/25/13 Sev=Info/4    IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
61     08:20:14.656 12/25/13 Sev=Info/4    IKE/0x63000021
Retransmitting last packet!
62     08:20:14.656 12/25/13 Sev=Info/4    IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 116.68.208.113
63     08:20:19.656 12/25/13 Sev=Info/4    IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=46B8917FD54C64AC R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
64     08:20:20.156 12/25/13 Sev=Info/4    IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=46B8917FD54C64AC R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
65     08:20:20.156 12/25/13 Sev=Info/4    CM/0x63100014
Unable to establish Phase 1 SA with server "116.68.208.113" because of "DEL_REASON_PEER_NOT_RESPONDING"
66     08:20:20.156 12/25/13 Sev=Info/5    CM/0x63100025
Initializing CVPNDrv
67     08:20:20.156 12/25/13 Sev=Info/6    CM/0x63100046
Set tunnel established flag in registry to 0.
68     08:20:20.156 12/25/13 Sev=Info/4    IKE/0x63000001
IKE received signal to terminate VPN connection
69     08:20:20.156 12/25/13 Sev=Info/4    IPSEC/0x63700014
Deleted all keys
70     08:20:20.156 12/25/13 Sev=Info/4    IPSEC/0x63700014
Deleted all keys
71     08:20:20.156 12/25/13 Sev=Info/4    IPSEC/0x63700014
Deleted all keys
72     08:20:20.156 12/25/13 Sev=Info/4    IPSEC/0x6370000A
IPSec driver successfully stopped

Hi Karsten,
Thank you for the reply !!! & best wishes for the new year 2014.
The problem is like this, if i select datacard connection type to NDIS it works but it doesnt work when i select RAS(modem) connection type for 3G datacard it doesnt. (NDIS and RAS(Modem) connection types are the 2 modes currently supporetd by the datacard.). Is there any case the users are experiencing from the similar problem? and what they have done to solve the issues? And thank you for the workaroung, i have checked the shrew-soft with win7 and it was working fine but not on win8, i will check shrew-soft on win8 very soon. Also we can move to the anyconnect solution but just want to know if this can solve our problem or not? whether there will be any issues with anyconnect solution for win 8 or not? can you please confim.
Thank you

How to find the top ten reports consuming the high response times in st03n?

HI Basis Gurus,
Please could anybody tell me "How can one find the top ten high response time consuming reports in st03n transaction or in is there any other way to find out this.Please help me its urgent....
Advance thanks....

hi Meghadoot,
below is an example for your request.
ST03N
Expert mode
Server name - Day- double clicdk Today
In analysis view - Ranking lists-double click Top Response time
Regards

How setup SPA525 vpn client?How configuration Cisco VPN server?

Hi all,
How setup SPA525 vpn?
How configuration Cisco VPN server for SPA525?
Regards
John

Hi John,
Do you want to setup the SPA525 on the UC300? If so the UC300 does not support any VPN or remote users. If you need configuration help with the UC5XX just let me know.
Thank you,
Jason Nickle

How long does Cisco VPN client keeps its logs

Hi,
How long does the Cisco VPN client keeps its logs? It seems like 2 weeks. Is it right?

February 18, 2010
Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments.
A 64-bit specific compatible image is available for installation on these platforms.
Please have communicate feedback (both positive and problems) to [email protected]
Key Capabilities available for Beta Testing:
New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
Release Notes will be available next week via a link once the download image is selected.
There are currently no plans to support Windows XP 64 bit in the VPN client.

How to add new group entry in Cisco Vpn using powershell

I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"

Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified

How to uninstall Cisco VPN client 5.0.07.0440, using SCCM \group policy?

How to uninstall Cisco VPN client 5.0.07.0440, using SCCM \group policy or may be a login script?
msiexec /u "vpnclient_setup.msi" /q /norestart , but it did not worked.
msiexec /x "vpnclient_setup.msi" /q /norestart , but it did not worked.
I hav apprx 500+ win 8 clients.
Thanks in Advance

Looks like I have to follow this exactly:
http://myitforum.com/cs2/blogs/smchugh/archive/2006/11/15/automating-removing-the-cisco-vpn-client.aspx
msiexec.exe /uninstall {Cisco VPN 5.x guid} /qn
MsiExec.exe/X{5FDC06BF-3D3D-4367-8FFB-4FAFCB61972D} /q /norestart

Using Cisco VPN client certificate for built in IPSec?

Hi,
Does anybody know if it is possible to "convert" a certificate exported from Cisco VPN client and import it into the Keychain for using it with built-in IPSec in Snow Leopard?
Thanks,
Oli

I too am having trouble importing the Cisco certificate. It would be nice for some clear documentation. We've been successful converting the x.509 cer to KPCS#7 using openssl which will import into the keychain. However, the VPN (Cisco IPSec) sill doesn't see it.

10.4.7: Cisco, VPN, Groups ... How?

I see in the release notes for OS X 10.4.7 that it now supports the Cisco VPN "groups". Since my company uses that, I'm very interested! But I can't see how to configure that ... Internet Connect still looks the same, doesn't appear to have anywhere to enter the group name / password.
Clues?
MacBook Pro (2x2.16GHz, 2Gb RAM, 100Gbx7200) Mac OS X (10.4.6) iMac G5, iBook, Parallels/WinXP, linux

Yeah, go to the Configuration drop down menu and select Edit Configurations... you can then enter the advanced info there. However don't expect it to work. At this point I don't believe anything Apple says about VPN connectivity with Cisco anymore. They've been saying it's fixed since 10.4.5 and it continues to fail everytime I try to connect.
Here's my log with the url and ip of our server obfuscated.
Tue Jun 27 16:57:54 2006 : L2TP connecting to server 'vpn url' (vpn ip)...
Tue Jun 27 16:58:57 2006 : L2TP cannot connect to the server
Tue Jun 27 16:59:47 2006 : L2TP connecting to server 'failover vpn url' (failover vpn ip)...
Tue Jun 27 17:00:46 2006 : L2TP cannot connect to the server
Tue Jun 27 17:00:46 2006 : L2TP cannot connect to the server

I have an airport extreme with a HP Folio laptop and cannon pixma MX882 printer. when i am VPN'd in thru Cisco vpn and try to print the wireless print connection stops. i Un-VPN and it prints. then i have to go back into VPN to continue?how do i configure

i have an Airport Extreme wireless router, HP Folio laptop (company supplied) and a Canon PIXMA MX882 wireless printer,copier, scanner and fax.
when i am VPN's in thru CISCO VPN to my company Intranet site I cannot print wirelessly. i have to turn off VPN, priint and log back into the company intranet site. is there a way to configure the router so that it is not blocking the signal?
Tx

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Since I upgraded to Lion, my RSA securid token and Cisco VPN client doesn't work any longer. Anyone have suggestions on how to fix that?

Since upgrading to Lion, I can no longer use VPN because my RSA securid token and CIsco VPN Client won't load. Any suggestioins out there?

.

How to increase built-in cisco vpn peer response timer?

Similar Messages

Maybe you are looking for