How to increase column header

Hello, may i know Table or Multicolumn Listbox in Labview 2012 is available to change column header format such as below image?
Solved!
Go to Solution.

I don't think you can merge cells (like Excel) with a LabVIEW MCL
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Similar Messages

How to get column header text in IWDTable

Hi
Just want to know how to get column header name in IWDTable.
I know that you can get it with
IWDAbstractTableColumn[] groupedColumns = table.getGroupedColumns();
for (int i = 0; i < groupedColumns.length; i++) {
     IWDAbstractTableColumn column = groupedColumns<i>;
     column.getHeader().getText();
But what if text isnt set on header level but its rendered from cellEditor model binding (im not sure if its like that).

Finally after your suggestion i did it with this code
String header = column.getHeader().getText();
                   if ((header == null || header.length() == 0) && column instanceof IWDTableColumn){
                        IWDTableCellEditor tableCellEditor = ((IWDTableColumn) column).getTableCellEditor();
                        if (tableCellEditor instanceof IWDTextView){
                             String bindingPath = ((IWDTextView)tableCellEditor).bindingOfText();
                              StringTokenizer tokenizer = new StringTokenizer(bindingPath,".");
                              String token = "";
                              IWDNodeInfo nodeInfo = context.getNodeInfo();
                              while (tokenizer.hasMoreTokens()){
                                   token = tokenizer.nextToken();
                                   if (tokenizer.hasMoreTokens()){
                                        nodeInfo = nodeInfo.getChild(token);
                              IWDAttributeInfo attribute = nodeInfo.getAttribute(token);
                              ISimpleType simpleType = attribute.getSimpleType();
                              simpleType.getDescription();
                             header = simpleType.getDescription();

How To avoid column heading for only total line in ALV list Display

Hi,
How To avoid column heading for only total line in ALV list Display.

Hi,
to change colunm header field catlog is built
look at the example below
Changing column text headers
use this to change, hide, or alter the ALV columns
CLEAR: gt_fcat.
READ TABLE gt_fcat WITH KEY fieldname = 'TEXT1' " ***
*TEXT1 is your field name
   ASSIGNING <gtfcat>.
IF sy-subrc = 0.
   <gtfcat>-coltext   = 'Date Type'.
   <gtfcat>-no_out    = ' '.
   <gtfcat>-tooltip   = 'Date Type Text from IT0019'.
   <gtfcat>-seltext   = 'IT0019'.
keep seltext to '' if u want to hide
ENDIF.
regards
austin

Vc++ how to read column header of cursor

How to fetch the Column name or header of the stored procedure which is using a cursor as the output.
P_out out sys_refcursor
need to read the column name of this output.
I am using Vc++ code to reterive the data, in Vc++ how to read column header of cursor

You haven't provided much detail to go on. How are you reading data from the ref cursor? Do you already have a reader from it?
Maybe this helps.
Greg
create or replace procedure proc1 (v1 out sys_refcursor) as
begin
open v1 for select * from emp;
end;
using System;
using System.Data;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
public class RefCur
    public static void Main()
        using (OracleConnection con = new OracleConnection("user id=scott;password=tiger;data source=orcl"))
            con.Open();
            using (OracleCommand cmd = new OracleCommand("proc1", con))
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.Parameters.Add(new OracleParameter("v1", OracleDbType.RefCursor, ParameterDirection.Output));
                cmd.ExecuteNonQuery();
                using (OracleDataReader reader = ((OracleRefCursor)cmd.Parameters[0].Value).GetDataReader())
                    for (int i=0;i<reader.FieldCount;i++)
                        Console.WriteLine(reader.GetName(i));

How to increase an head menu in fotoshop.   do him biger

How to increase an head menu in fotoshop.   do it biger

How to increase an head menu in fotoshop.   do it biger

How to Link column header only in classic Report in APEX 4.1

Hello Everybody,
Probably there is a simpler way to do this, but I am not sure. I want a link on column header in Report on a specific column. The link will take me to new region or a page.
How to achieve this in APEX 4.1
Theme : Blue 2
Database 11g
I see there is a column link opiton, but that creates link for every row in that column on a specific icon, I just want link on a title of the column in Classic Report.
For Example,
if there are two columns Name and Client ID, which has 10 records to display on a classic report. I wan the link on Client ID on header only not on the records.
Can anybody provide some simple solution for this.
Thanks,
--CP
Edited by: cpora007 on Jun 22, 2012 10:38 AM

Hello,
I didn't understand, what do you mean by default it is going to sort popup. I have a classic report based on SQL, which generates a report with static header, there is no sort or any other link on that.
I added a link in column header name with an anchor. It works and takes to the new page.
But it is not a proper solution. A solution based on Jquery dynamic action is preferable. Also the preferred option is that the link opens a hidden region of the same page at the same location of the report and the report gets hidden. after the procession on the form region and submitting the update/ insert process. the report region shows up with the change data.
Moving on to new page is 2nd option, if the first do not work.
In the JavaScript, put: apex.submit("GO_TO_MY_OTHER_PAGE");
On the page, create a Branch to the Second page. Set the condition to Request=Expression 1. Set the request to "GO_TO_MY_OTHER_PAGE"
On which page I need to create a branch?, Is it on the report page or the form page.
Thanks a lot for the response. I appreciate your kind efforts in this regard.
--CP

How to create column header text while downloading file

How can we create column header text while downloading file using function GUI_DOWNLOAD(in SAP Release 4.6c) because there is no FIELDNAMES parameter in
4.6c version.

Hii,
Check this sample code. I have called GUI_DOWNLOAD twice. Onetime to download header of table and next time data of table
REPORT z_file_download.
DATA: w_name(90) TYPE c.
DATA:
BEGIN OF fs_flight,
    carrid   LIKE sflight-carrid,
    connid   LIKE sflight-connid,
    fldate   LIKE sflight-fldate,
    price    LIKE sflight-price,
    currency LIKE sflight-currency,
END OF fs_flight.
DATA:
BEGIN OF fs_head,
    carrid(10) TYPE c,
    connid(10) TYPE c,
    fldate(10) TYPE c,
    price(10) TYPE c,
    curr(10) TYPE c,
END OF fs_head.
DATA:
t_head LIKE
   TABLE OF
         fs_head.
DATA:
t_flight LIKE
     TABLE OF
           fs_flight.
fs_head-carrid = 'CARRID'.
fs_head-connid = 'CONNID'.
fs_head-fldate = 'FLDATE'.
fs_head-price = 'PRICE'.
fs_head-curr   = 'CURRENCY'.
APPEND fs_head TO t_head.
SELECT-OPTIONS:
s_carrid FOR fs_flight-carrid.
START-OF-SELECTION.
SELECT carrid
         connid
         fldate
         price
         currency
    FROM sflight
    INTO TABLE t_flight
   WHERE carrid IN s_carrid.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    filename                      = 'D:\flight.xls'
   FILETYPE                      = 'ASC'
*   APPEND                        = ' '
    WRITE_FIELD_SEPARATOR         = 'X'
*   HEADER                        = '00'
*   TRUNC_TRAILING_BLANKS         = ' '
*   WRITE_LF                      = 'X'
*   COL_SELECT                    = ' '
*   COL_SELECT_MASK               = ' '
*   DAT_MODE                      = ' '
*   CONFIRM_OVERWRITE             = ' '
*   NO_AUTH_CHECK                 = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   WRITE_BOM                     = ' '
* IMPORTING
*   FILELENGTH                    =
tables
    data_tab                      = t_head
EXCEPTIONS
   FILE_WRITE_ERROR              = 1
   NO_BATCH                      = 2
   GUI_REFUSE_FILETRANSFER       = 3
   INVALID_TYPE                  = 4
   NO_AUTHORITY                  = 5
   UNKNOWN_ERROR                 = 6
   HEADER_NOT_ALLOWED            = 7
   SEPARATOR_NOT_ALLOWED         = 8
   FILESIZE_NOT_ALLOWED          = 9
   HEADER_TOO_LONG               = 10
   DP_ERROR_CREATE               = 11
   DP_ERROR_SEND                 = 12
   DP_ERROR_WRITE                = 13
   UNKNOWN_DP_ERROR              = 14
   ACCESS_DENIED                 = 15
   DP_OUT_OF_MEMORY              = 16
   DISK_FULL                     = 17
   DP_TIMEOUT                    = 18
   FILE_NOT_FOUND                = 19
   DATAPROVIDER_EXCEPTION        = 20
   CONTROL_FLUSH_ERROR           = 21
   OTHERS                        = 22
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = 'D:\flight.xls'
      filetype                = 'ASC'
      append                  = 'X'
      write_field_separator   = 'X'
    TABLES
      data_tab                = t_flight
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc EQ 0.
    MESSAGE 'Download successful' TYPE 'I'.
ENDIF.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Abhijeet

Re: Increasing Column Header Length While Printing in ALV Grid

Hi
For some column headers in a report, the translations in Turkey are more than 40 characters, because of which while executing the report in TR language, the column header is getting truncated.
So, I would like to know if we can increase the column header length while printing the ALV Grid(OO ALV) output.
Or else, Is there any way where we can divide the column header into 2 rows.
Please let me know.
Thanks and Regards,
Vishwa.

Jose and Sivaram,
Thanks for replying.
The problem we have is with the column headers, there is a limit of 40 characters for the column header in ALV reports. So, increasing the outputlen also did not help.
Regards,
Vishwa.

How to change column heading in line item report

Hello Experts,
How to change the column heading in the line item report CJI4 or CJI3 ?
for eg: The field WBS will show as Object in the heading. Here I would like to change to WBS.
Is there a way to do this without changing ABAP code
FATMAN

Not possible through standard I guess.
Enhancement you should be looking is COOMEP01 which includes the component EXIT_SAPLKAEP_009
i.e., Line Item Reports: Customer-specific Formatting of the Lists.You use this enhancement to modify column headings.
Regards
Sreenivas

In ALV how to make column heading in two lines ?

In ALV if one the column heading is say for example "Purchase Order", if i want to display it as "Purchase" and "Order" below the "Purchase". Is it possible? if so how?
Thanks in advance.
Sounder

Hi Sounder,
It is highly impossible... If u tell your requirement clearly... we will try for solution..
thanks and regards
sk
Rewards if helpful

How to increase request header

hi,
Can anyone please help to know how to increase http request header size in 10.3. IN tomcat its in server.xml as below
<Connector port="@httpserver.pubhttp@" address="@httpsserver.bindaddress.pubhttp@"
+ maxThreads="250" maxHttpHeaderSize="8192"....
Can anyone please tell me the equivalent in weblogic 10.3.. My app is failing with the error as " header size is too large" . pls help.
regards

sorry, search results does not seem to be helpful. We are getting a header in request which is of the size 4kb, not sure how to support this in weblogic.
Edited by: user10422897 on Jul 13, 2011 2:44 AM

How to implement column header sort

Hi all,
Does anyone know how to configure Oracle 9i AS Portal Release 2 column header sort.
In Portal, Oracle has setup the IDE to sort your columns using arrow keys in the
column headers. I would like to do the same thing without using the Custom Form.
TIA,
Daniel N

I would suggest using the built in Collections framework for sorting.
have class A implement the Comparable interface then implement the compareTo method as follows:
public int compareTo(Object o) {
    A a = (A)o; // <-- may cause ClassCastException if (o instanceof A) != true, but that should not be a problem.
    int value = attr1.compareTo(a.attr1);
    if (value != 0) return value;
    value = attr2.compareTo(a.attr2);
    if (value != 0) return value;
    value = a.attr3.compareTo(attr3); //Notice I switched a.attr3 and attr3 for desc
    return value;
}That should do it for you.
Now put everything into an instance of java.util.List and pass that to java.util.Collections.sort(java.util.List);
If you didn't create class A, and therefore can't add a method to it, then implement a Comparator. The idea is the same, just look at the java.util.Comparator API and use java.util.Collection.sort(java.util.List, java.util.Comparator) method to sort;

How to set column heading dynamically?

Hi:
How can I set a column heading dynamically -by PL/SQL code- ?
Regards,

Hi,
Create a formula field, and return desired heading depending on your conditions, and use that field as the column header.
Regards,
Manu.

How to pass column header as a parameter in Validation Expression (APEX4.0)

Hello
I created a new Page validation in APEX4.0 ( not 4.1 ).
(1) Type : Function Returning error text
(2) Validation Expression 1 :
begin
return validate_name ( p_c=> #COLUMN_HEADER# ,p_c_value=> to_date(:p26_LEAVE_FROM,'dd/mm/yyyy') );
end;
note: the validate_name is an oracle pl/sql procedure which takes two input parameters ( column header name and actual value ) and return a specific error message ( to that column ) or NULL.
(3) In the Error Message section, I left Error Message blank ( as the app ignored the mssage but used the one returned from the above function)
However, I chose "The Error display location" to be inline with field and notification" and Associated Item to be "p26_LEAVE_FROM".
My question, it worked if I hard coded the actual column header "LEAVE FROM" , but it didn't work if I used the above #COLUMN_HEADER# in Validation Expression. Can I avoid hard coding as the column header might be changed one day. Is there a better way to deal with multiple column validations with different error message for each column ? It seems that I will have to create similar page valiation for each column to be validated.
Thanks for your advice.
Edited by: Susanna on 19/01/2012 17:45

You want something like this:
DECLARE
lio_success VARCHAR2( 2000 );
li_id        NUMBER;
li_dep_id    NUMBER;
li_sel_id := NUMBER;
li_date DATE;
lo_date DATE;
lio_return_message xyz_bpe_rec_fn.xyz_bpe_rec_col;
l_ret xyz;
BEGIN
lio_success := 'some value';
li_id := NULL;     -- or some number
li_dep_id := NULL; -- or some number
li_sel_id := NULL; -- or some number
li_date DATE := sysdate;
lio_return_message.col1 := somevalue;
lio_return_message.col2 := somevalue;
lio_return_message.coln := somevalue;
l_ret := get_xyz( lio_success
                  , li_id
                  , li_dep_id
                  , li_sel_id
                  , li_date
                  , lo_date
                  , lio_return_message );
END;
/

Exporting to Excel - How to control Column Heading?

I'm working in SSRS 2012. I have one tablix in the report body. The tablix has both Row and Column Groups.
When rendering in the web browser the report page breaks on a row group. The Repeat Column Headers property is set to "True" so it shows the column headings from page to page.
When rendering in Excel, I want one worksheet and not separate worksheets so the page break is disabled via the Page Break->Disabled property expression "=IIf(Globals!RenderFormat.Name="EXCELOPENXML", True, False)".
This is all good but the Column Headings only show up once at the very top in the excel worksheet.
Is it possible to make the Column Headings repeat with each tablix data region as it is rendered vertically down the worksheet?
OR is there a way from SSRS to set the Excel property "Rows to Repeat at top" to include Column Heading; by default the SSRS Report's header is repeated in Excel, but can the number of rows be changed to include the Column Heading?
OR is there some other work around?
Thanks for your help.
Mark

Thanks for the reply Wendy.
You addressed my second question ... "is there a way from SSRS to set the Excel property "Rows to Repeat at top" to include Column Heading; by default the SSRS Report's header is repeated in Excel, but can it be changed to include the Column Heading?
Based on your response, the only way to freeze the column header in excel is to freeze or split panes AFTER export to excel. well booo but I have to accept that I guess.
My first question is what I really want to do, which is to physically repeat the Column Heading in the excel rendering. I included two pictures demonstrate what I want ...
1) the standard SSRS report rendered in Excel ... Column Headings are shown once:
Standard Export to Excel
                       Year
Region
Category
2011
2012
2013
        Total
East
Sales
10
20
30
60
Expenses
8
20
10
38
Profit
2
0
20
22
West
Sales
8
16
24
48
Expenses
6
16
8
30
Profit
2
0
16
18
2) what I'd like to see rendered in Excel ... which is to repeat the headers as you scroll down the page
Desired Export to Excel
                      Year
Region
Category
2011
2012
2013
        Total
East
Sales
10
20
30
60
Expenses
8
20
10
38
Profit
2
0
20
22
                       Year
Region
Category
2011
2012
2013
        Total
West
Sales
8
16
24
48
Expenses
6
16
8
30
Profit
2
0
16
18
Thanks again for your help,
Mark

How to increase column header

Similar Messages

Maybe you are looking for