How to increase CPU utilisation in XI

Hi Experts,
I have a scenario where in the server is being targeted with many many messages,
I have seen the tuning guide and all other material..there is sufficient hardware for the same as well.
however when i go to transaction ST06, I see the CPU utilisation of just about 2 %.
Is there some gap I need to bridge, ne thing im missing out?
Request you to let me know if u have come across a similar situation.
Thanks In Advance.
Regards,
Ibrahim

Ibrahim,
The Below link might help you
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/008597c4-d811-2a10-99b1-811a11dc46ec
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f04542-da11-2a10-65a8-fa7ef292bb43
/people/federico.babelis2/blog/2006/04/19/the-journey-to-tuning-netweaver-components--trip-i-the-basics
Cheers
Agasthuri

Similar Messages

How to increase cpu voltage on A75A-G35?

Please tell me how to increase cpu voltage on A75A-G35(I changed pstates in BIOS but voltage not changed!)? and then tell me range of voltage in 1-7 Pstates?
Thanks.

Quote from: MSI service FAQ
Q: I cannot adjust the CPU Voltage on my A55/A75 motherboard?
A: Due to a hardware limitation on this platform, you cannot adjust the CPU voltage. However, you can adjust the NB voltage which is the same on this platform.
(http://service.msicomputer.com/html/popup/techsup/formviewer.asp?esoformid=2987)
The NB voltage setting is below the "Advanced DRAM Configuration" and the only way to increase a cpu relating voltage on that board.

How to increase cpu time for a job

We have a application which submits a scheduler job. The job parses a blob and inserts rows into a table. It was running slow . On checking the scheduler tables I found out for actual time of 2 hours the job is taking cpu time of less than 2 minutes.
Can anybody help us with any idea to increase the CPU utilization by around 4 times so the job finishes in 30 minutes
Thanks
Saikat

Hi,
How long does it take when you run the same action that the job is running from sqlplus ?
This looks like more of an Oracle tuning question than a Scheduler question. You might get better answers if you gave more info about the pl/sql code being run and posted this to the general pl/sql forum here
PL/SQL
You can also try general PL/SQL profiling tools to see what statements in your code are taking the longest while to run e.g. AWR and ADDM if you have licenses for them.
Hope this helps,
Ravi.

How to restart IIS on high CPU utilisation

Hi There,
Heres some background on a problem I'm trying to mitigate with SCOM 2010.
Got a problem with a web server, occasionally the web app causes the CPU to max out and stay there. We can't pick when it happens and often it happens out of hours when everyone is asleep so we don't know that the CPU is running maxed out until the morning.
At this stage the only way to resolve CPU utilisation is to do iisreset on the affected server.
We're still trying to figure out what is causing the problem but until then it would be really good to have SCOM detect the high CPU on the server and restart IIS for me. That way the site performance recovers quicker because we wouldn't need someone to
notice the alert and issue the iisreset.
I've been tooling around in SCOM trying to figure out how I can have SCOM restart IIS on the affected server when the CPU spikes but I'm just not sure how to do it.
I only want this IIS Restart Recovery action to only affect the server that has been playing up, rather than affecting all servers that run IIS.
It would be good to have SCOM detect that the IIS service (w3wp) is the service maxing out the CPU and to restart it on the affected server. But I'd also accept SCOM simply detecting high CPU (> 95%) on the CPU and restarting the IIS service because nothing
else on the server has been seen to cause the CPU to max out like IIS does.
Suggestions very much appreciated.

Please try if this helps:
Create a custom rule Performance Based->Windows Performance with Counter as Processor & threshold as 95%. Keep the rule disabled.
Goto properties of that Rule & under Configuration, create a command Response to restart IIS service.
Override the rule & enable it only for IIS computer group.
Hope it helps !!

How to reduce CPU Utlisation while working with OLAP Cubes?

Hi All,
I am working on OLAP cubes on MS SQL Server 2005. I have imported the same in the OBIEE rpd and when I query it in answers, the CPU Utilisation increases to 98%.
So the results also take pretty much time to get displayed.
Is there any other method with which I can reduce the CPU usage?
Regards,
Apoorv

Sorry, but that's like asking "My Data Warehouse is slow! What can I do?!".
Starting from the top of the food chain it depends on:
- how your report is built
- what the logical SQL is that this report fires against the BI server
- your logical business model
- your physical model in the rpd
- whether you use BI server aggregation or external aggregation for the cube source columns
- the structure of your cube
- whether your cube is pre-aggregated or not
- whether you did any performance tuning or your cube
...and tons of other things. I can query 5 dimensions with thousands of dynamic and shared members against dynamic accounts (not stored) without performance impact if I'm hitting an optimized cube (or area of my cube) but have > 1min performance for another comparatively simple query which queries a non-aggregated cube and does aggregation within the BI server (just as an example).
Start by verifying that your cube is nicely built.

How to increase your battery health - anyone with similar experiences?

this is my very own self made instruction of "how to increase your battery health"
it is the procedure how i have done it serverall times on my powerbook g4 12".
my stats: 374 cycles, health 86% (3790 of 4400mAh)
age of my mac: 57month (battery bit newer)
**if you to try this: it is on your own risk!**
**this may not be suitable for mac newbies**
**be sure to read this twice before you do it once!**
you will need:
-a pocket lamp or comparable light (to see anything on your sreen when it is dark --> light from the back through apple logo)
-coconutbattery (coconut-flavour.com/coconutbattery) or comparable programm to track your battery information in realtime
-activity monitor
-cool enviroment (to ensure your fans don't have to work that much)
-some time and patience
the intructions:
step1: load your mac until the orange light turns green
step2: disconnect the power adapter
step3: use your mac until 15-25% battery life (track this information in your menu bar)
step4: slow down your activities. the order of the following actions depend on your usage of your mac:
__close programms that use lots of cpu/gpu to ensure the fans slow down to 0rpm (!!)
__turn off everything that needs battery power: airport / bluetooth / speakers / etc.
__eject dvd or cd
__close all programms with important data
__eject idisk / .dmg files in your finder (this is not only a matter of data security)
__dissonnected from peripherals such as ethernet / internet / mouse / keyboard
__use lower brightness level
__open activity monitor to ensure that your hard drive activity is very low, may be you need to close more active programms, close activity monitor when hard drive activity is very low
__open system preferences >> energy saver preferences >> choose longest battery life
when your are ready with those actions go on and ensure you are able to connect to power adapter with your mac quickly (be able to charge - don't do it yet!)
step5: be patient. now it should take some time until your battery level goes down to 3-5%
now there should be no programm running.
do not open any programm now!
do not have a look at your dashboard!
now your mac should be really quiet:
-no fans (0rpm!)
-nearly no hard drive activity!!
-->> if this not the case break go on with step 11&12, try again in a week or two
-->> if you are ready go on with step6
step6: open coconutbattery und use the lowest brightness level
play with your trackpad to ensure your screensaver won't start. waste time until you are at 1-2% battery life.
step7: take your lamp and spot through the transperent apple logo, position your coconut battery window somehow that you can see the current battery charge und the maxium battery charge in the spot of your lamp through the apple logo.
step8: go from the lowest brightness level to the level under the lowest brightness level (a dark screen)
step9: watch your current battery charge carefully und keep on playing with your trackpad to ensure your screensaver won't start.
step10: there is kind of battery buffer made of approximately 1% (once when my "current battery charge" was 3624mAh and this kind of buffer was at 36mAh)
to empty this kind of battery buffer takes much longer as you might expect!
when your current battery charge turns under this kind of battery buffer, your maximum battery charge should change. hopefully it is higher or stays the same. when it is lower now: i'm sorry - i have warned you. may be you have to go through this 'how to' more carefully!?
step11: plug in your power adapter before the battery is cero!
step12: load until the orange light turns green
step13: if it was helpful do not repeat it more than once a week, better once a month
-->webcal://www.apple.com/batteries/images/notebook_icalreminder.ics
(via: http://www.apple.com/batteries/notebooks.html)
anyone with similar experiences about increasing battery health!?
(yes, i'm sorry for my poor english, i've tried my best)

Me too! My battery lasts for 10 minutes. It is awful and I am on my 4th power adapter since they keep breaking too.
From coconut battery: Maximum battery charge 310mah, original 4400, age of mac 45 months, 140 cycles.
From system profile:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 310
Remaining Capacity (mAh): 213
Amperage (mA): -1205
Voltage (mV): 11557
Cycle Count: 140
I went to an apple authorized retailer and they said nothing I can do if it is out of warranty.. is this true?

How to increase the database size

Hi All ,
Our Client is going to increase their customers from 3.5 million to 5 millions
(12 millions in future ) and there is no increase in the existing licenses..
At present we have very less space in Data base server. We are Going Live at the End of the Month.
How to increase the database size to meet the Client requirements.
we have to increase the No of Processerors etc...
Below are the details of Servers:
System Model: IBM,7040-681
Machine Serial Number: 830D5BF
Processor Type: PowerPC_POWER4
Number Of Processors: 2
Processor Clock Speed: 1904 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 4 bgl-svr-biap
Memory Size: 4096 MB
Good Memory Size: 4096 MB
Note : Server is IBM P690.
1) System Lansdcape --> Two System Landsacpe ( Dev to Prod )
2) BW Version --> 3.5
3) SAP Basis --- > 6.4
4) No of Application servers currently having --> Only One Server
Can any body suggest me how to solve this.....
Thanks in Advance..
Kasi Chukka

Hi Kasi,
Your question is not very clear, from the looks of it, the load on your client's system will be doubling soon.
You need to look at the system stats on how the system is handling the current load, use transactions ST06, ST04 and ST02 to check if the DB hit ratios are as expected, the cpu idle time, the busy periods. Identify if there is large amounts of paging on the server(candidate for increase in real memory).
On AIX level, you will need to look at CPU / Memory usage.
On SAP Application server, you need to look at SAP Buffers.
On Oracle end, look at SGA stats, if it need to increase, the data growth that is current and estimated growth (DB02).
You will not get an exact answer to it, you will need to analyze the existing load and then estimate (guess). The hardware upgrade will also depend on what the client is willing to spend, its always a good practise to add 20% to what you have estimated as these figures are never accurate.
All the best.
Cheers,
Nisch

How to increase the size of Redo log files?

Hi All,
I have 10g R2 RAC on RHEL. As of now, i have 3 redo log files of 50MB size. i have used redo log size advisor by setting fast_start_mttr_target=1800 to check the optimal size of the redologs, it is showing 400MB. Now, i want to increase the size of redo log files. how to increase it?
If we are supposed to do it on production, how to do?
I found the following in one of the article....
"The size of the redo log files can influence performance, because the behavior of the database writer and archiver processes depend on the redo log sizes. Generally, larger redo log files provide better performance, however it must balanced out with the expected recovery time.Undersized log files increase checkpoint activity and increase CPU usage."
I did not understand the the point however it must balanced out with the expected recovery time in the above given paragraph.
Can anybody help me?
Thanks,
Praveen.

You dont have to shutdown the database before dropping redo log group but make sure you have atleast two other redo log groups. Also note that you cannot drop active redo log group.
Here is nice link,
http://www.idevelopment.info/data/Oracle/DBA_tips/Database_Administration/DBA_34.shtml
And make sure you test this in test database first. Production should be touched only after you are really comfortable with this procedure.

BSO Agg Times Drastically Increases After Increasing CPU

Hello All,
I will make a long story short and then explain more if you guys need more information.
We are running 11.1.1.3 64-bit Essbase with 1 Planning application.
We were running load tests with 150 users, where users are running an Aggregation Business Rule. The Business Rule would run in about 7 seconds until all 150 users were in the system. Once the users were loaded the Agg Times increased to about a minute and eventually were timing out. At this point, the Essbase server had 16GB RAM and 4CPU, and the CPU's were pegging at 100%.
We increased CPU count to 8, and now we can not get the Agg to run in less than two minutes. We did not change any of the Config settings, but could not get back to the original performance.
We then tried tweaking the CFG, such as enabling CALCPARALLEL 7, but this seems to have no affect.
This is a very small BSO app at this point,.
Any Ideas?
Thanks,
Nick

What are the test parameters for your 150 users e.g. how frequently does a given "user" perform an action? How are these actions unique per user e.g. is each user user a specific entity, department, or other member in their rule? Please provide as much detail as you can about how the users is simulated and what calculations are running.
Testing when performed improperly or simulating a behavior that makes no sense e.g. running an aggregation that is on the same exact data set will run very poorly. For example Essbase has a lock timeout and if you run say the exact same calculation which has an aggregation that takes 20 seconds and you run that 3 times with a 2 second lag between the executions that locking behavior will kick in and all three calculations which are competing for the same blocks will now run in a very very much slower time frame.
Regards,
John A. Booth
http://www.metavero.com

How to Increase Virtual memory in Windows XP (32 Bit ) O.S

Hi Team,
Could any one help me , how i can extend virtual memory in Windows Xp Professional sp3 (32 Bit Edition ) . I am able to increase virtual memory in my Laptop ( Lenovo T 61, Windows Xp professional ) up to 8 GB. But in desktop not able to
increase more than 4 GB.
is it any hardware or processor dependency for virtual memory ?
waiting for response ...
Regards, Triyambak

Sir, Follow these steps to Increase the Virtual Memory in XP.
How to increase Virtual Memory?
In Windows XP
1.Click Start, and then click Control Panel.
2.Click Performance and Maintenance, and then click System.
3.On the Advanced tab, under Performance, click Settings.
4.On the Advanced tab, under Virtual memory, click Change.
5.Under Drive [Volume Label], click the drive that contains the paging file that you want to change.
6.Under Paging file size for selected drive, click to Custom size check box. You can enter the amount of memory you would like to reserve for Virtual memory by entering the initial and maximum size.
7.Click Set
When you are prompted to restart the computer, click Yes.
Special Note: You should choose the same amount for the initial size and maximum size. This will Stop your CPU from constantly changing the paging file.
Regards,
MCP | MCTS | MCITP

Gmail on FF4 (osx10.5.8) increase cpu-load and speed up the fans, but why?

sorry but ff4 uses more cpu-power than all my adobe-software –
and i dont need an extra heating at the office the fans runnig instantly louder than without ff4.
the following add-ons are installed:
- 1 Password 3.5.9
- awsome screenshot 2.3
- firefox sync 1.7
- xmarks 3.9.10
and some labs are activated in gmail.
THX for every answer and sorry for the german slang …
tom

AnointedOne wrote:
My 1 year old MBP running OSX has got more sluggish. The little multicolored spinning timer wheel keeps appearing a lot more now, and I hate it! My MBP takes drastically longer to boot when i turn it on as opposed to when I just got it. My web pages take a long time to load. Can anyone help me? WHat can I do to speed up my MBP. I am a novice mac user. Again my mac is getting slower by the day and i dont know how to increase its overall performance. Is there any simple software that can boost overall performance or will I have to reformat my MBP? I have a 200gb HD with 50 gb free and 4 gb of ram.
Welcome to Apple's discussion groups.
Launch the Activity Monitor utility. Pull down the list near the top and set it to "All Processes". Click on the "CPU" column heading to put the highest CPU consumers at the top. Also click on the "CPU" tab in the lower part of the window to check the value for "% Idle". If that value is much above zero, check the other categories for signs of resource problems. If nothing there points to a possible problem, launch the Console utility and look for messages that might suggest a problem. If you see messages that you have trouble interpreting, post them here and someone should be able to help.

How to decrease CPU usage when using multiple threads?

I am using vb.net , .NetFramework 2.0 .
My application gets live stock prices from google and updates stocks in database each 10 seconds.
I get this code for multithreading. When application starts updating stocks in database(about 200 stocks) , the update takes up to 3 seconds but it increase CPU usage from 10 % to 70 % or 80 %.
What is the best way to to update database without getting CPU increase to high level?
I observed that all threads works at the same time. how to make each thread wait until the second ends?
This is my code. The problem is in function updateThreaded2().
Please I need quick help. Thanks
Public Function Update2(ByVal l As SortableBindingList(Of NewStockList)) As Long
res = 0
UThread = New System.Threading.Thread(AddressOf UpdateThreaded2)
If Me.URunning = True Then
Else
Try
Me.URunning = True
Interlocked.Exchange(Me.UCount, 0) 'threadsafe method of assigning static value
Interlocked.Exchange(Me.UDone, 0) 'threadsafe method of assigning static value
UThread.Priority = Threading.ThreadPriority.BelowNormal
UThread.IsBackground = True
UThread.Start(l)
Return 0
Catch ex As Exception
End Try
End If
End Function
Private Sub UpdateThreaded2(ByVal l As SortableBindingList(Of NewStockList))
Dim i As Integer = 0
Dim threadcount As Integer = Math.Min(Me.MaxThreads, Me.Stocks.Count)
Dim threads(threadcount - 1) As SUTC
Try
While i < Me.Stocks.Count
For j As Integer = 0 To threadcount - 1
If threads(j) Is Nothing Then
If i < Me.Stocks.Count Then
threads(j) = New SUTC(Me.Stocks(i), Me.DefaultService, AdjustSplits, Use20Minutes, l)
threads(j).Thread.Priority = Threading.ThreadPriority.BelowNormal
threads(j).Thread.IsBackground = True
threads(j).Thread.Start()
i += 1
End If
ElseIf threads(j).UpdateState = 0 Then
If i < Me.Stocks.Count Then
SecUpd(j) = Me.Stocks(i).symbol
threads(j) = New SUTC(Me.Stocks(i), Me.DefaultService, AdjustSplits, Use20Minutes, l)
threads(j).Thread.Priority = Threading.ThreadPriority.BelowNormal
threads(j).Thread.IsBackground = True
threads(j).Thread.Start()
i += 1
End If
End If
Next
Dim running As Boolean = True
While running
For j As Integer = 0 To threadcount - 1
If threads(j).UpdateState = 0 Then
Thread.Sleep(10)
running = False
SecUpd(j) = ""
Interlocked.Increment(UDone) 'threadsafe method of incrementing a variable by 1
Interlocked.Exchange(UCount, UCount + threads(j).UpdateCount) 'Threadsafe method for assigning a value
End If
Next
End While
End While
Dim pending As Integer = threadcount
Dim tempcount As Integer = 0
Dim oldcount As Integer = UCount
While pending > 0
pending = threadcount
tempcount = 0
For i = 0 To threadcount - 1
If threads(i).UpdateState = 0 Then
SecUpd(i) = ""
pending -= 1
tempcount += threads(i).UpdateCount
Thread.Sleep(10)
End If
Next
Interlocked.Exchange(UDone, Me.Stocks.Count - pending) 'Threadsafe method for assigning a value
Interlocked.Exchange(UCount, oldcount + tempcount) 'Threadsafe method for assigning a value
End While
Me.URunning = False
Catch ex As System.Threading.ThreadAbortException 'handle abort correctly
Dim pending As Integer = threadcount
Dim tempcount As Integer = 0
Dim oldcount As Integer = UCount
While pending > 0
pending = threadcount
tempcount = 0
For i = 0 To threadcount - 1
If threads(i).UpdateState = 0 Then
SecUpd(i) = ""
pending -= 1
tempcount += threads(i).UpdateCount
End If
Next
Interlocked.Exchange(UDone, Me.Stocks.Count - pending) 'Threadsafe method for assigning a value
Interlocked.Exchange(UCount, oldcount + tempcount) 'Threadsafe method for assigning a value
End While
End Try
End Sub

When the market is opened, stock prices changed every 500 ms . You can see this change on google finance.
I figured as much, but my thoughts are that if you can somehow find a way to make your program more event driven, then it may be possible to reduce unnecessary looping...
“If you want something you've never had, you need to do something you've never done.”
Don't forget to mark
helpful posts and answers
! Answer an interesting question? Write a
new article
about it! My Articles
*This post does not reflect the opinion of Microsoft, or its employees.

How to reduce CPU fan sound....help!!! help!

Hello my friends!
I got my new Computer just before christmas.
But I dont like the screaming sound the CPU fan makes.
I have installed the corecenter and put it into auto and the sound increased a little.....but its still annoying.
I should be able to use different modes in corecell but I can figure how.....MSI talks about " BUZZFREE" & "LIFEPRO" & "POWERPRO" & "SPEEDSTER".....What is this and how do I Enable them.....Cant find them in corecenter.....
The only thing I find is Auto and manual.
Anyvone who can recomend a Good and silent fan for my CPU what should i be buying.......Please help me.
And how hot may the cpu reach.....how hot can it be.....what temperature should I try to run it on....
MY SYSTEM:
CPU 3.0 Ghz P4 + standard Fan
Motherboard : MSI 865PE Neo2-LS Vers 1.1 + Bios 1.9
Grafic: Hercules 9800 Pro 128 MB + Catalyst 3.10
Chase: Antec Sonata 380W + 120mm fan (Low speed)
Best regards
Mr Lithesteel

Those other options you mentioned have nothing to do with how quiet your CPU Fan is Going to Be (By the Way why, what type of Heatsink Fan are you using)? and under Core-Center, You can Manually set the speed of Both the CPU and NB Fans by Selecting "User Mode" in the Fan Options UI,There you can choose up to 7 different speed settings.....And If you plan on Overclocking your FSB on your PC, you should be very careful on how low you set the CPU Fan, as It can and will get hot if you are using the "Stock" Intel Thermal Solution......If you want Great Cooling capability and a Quiet Fan, you should consider some of the Aftermarket Units for sale out there, I happen to have on all 3 of my systems (and Love) the Zalman 7000 AlCu heatsink fan unit, it is Big 96mm fan but Quiet, even at Full speed, and it is a Variable Speed (hardware and software adjustable) as at 100% speed, it only has to spin at 2,700 RPM'S, where the Stock Intel Unit spins at Close to 5,000 RPM'S, and with the Zalman you maintain about a -12 Degree C Delta in cooling capability over the Stock Intel unit.............................Sean REILLY875

How to find CPU and Memory Utilization

Hi,
How to find CPU and Memory Utilization of my application which is
running in solaris workstation.My application has a management console in which we need to update the cpu and memory periodically.
(Notr : Usage of JNI is restrcited)
Thnx and Rgds,
Mohan

There is no CPU usage API in Java. You need some JNI code. For memory usage see the Runtime methods:
     * Get information of memory usage: max, total, free and (available/used).
     * <ul>
     * <li>Max is the maximum amount of bytes the application can allocate (see also java options -Xmx). This value is fixed.
     * If the application tries to allocate more memory than Max, an OutOfMemoryError is thrown.
     * <li>Total is the amount of bytes currently allocated from the JVM for the application.
     * This value just increases (and doesn't decrease) up to the value of Max depending on the applications memory
     * requirements.
     * <li>Free is the amount of memory that once was occupied by the application but is given back to the JVM. This value
     * varies between 0 and Total.
     * <li>The used amount of memory is the memory currently allocated by the application. This value is always less or equal
     * to Total.
     * <li>The available amount of memory is the maximum number of bytes that can be allocated by the application (Max - used).
     * </ul>
     * In brief: used <= total <= max
     * <p>
     * The JVM can allocate up to 64MB (be default) system memory for the application. If more is required, the JVM has to be started with the Xmx option
     * (e.g. "java -Xmx128m" for 128 MB). The amount of currently allocated system memory is Total. As the JVM can't give back unallocated memory
     * to the operating system, Total can just increase (up to Max).
     * @return Memory info.
    static public String getMemoryInfo() {
        StringBuilder sb = new StringBuilder();
        sb.append("Used: ");
        sb.append(toMemoryFormat(getUsedMemory()));
        sb.append(", Available: ");
        sb.append(toMemoryFormat(getAvailableMemory()));
        sb.append(" (Max: ");
        sb.append(toMemoryFormat(Runtime.getRuntime().maxMemory()));
        sb.append(", Total: ");
        sb.append(toMemoryFormat(Runtime.getRuntime().totalMemory()));
        sb.append(", Free: ");
        sb.append(toMemoryFormat(Runtime.getRuntime().freeMemory()));
        sb.append(")");
        return sb.toString();
    }//getMemoryInfo()

How to Increase number of oacore jvm's in EBS 12.1

Hi,
Does anybody know of a document showing how we increase the number of jvm's for the oacore in EBS 12.1 ? I found some google searches detailing changing the opmn.xml file but I would like to see a document detailing which references need to changed.
Also it is often stated that 1 jvm should configured for each cpu and best practice should be a 1 jvm should be configured for 2 cpu's. Does the type of processor effect this rule, is this as valid for a risc processor and a intel processor.
Thanks
Mike

Please see these docs.
Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12 [ID 362851.1]
How To Prevent Inactive JDBC Connections In Oracle Applications [ID 427759.1]
Thanks,
Hussein

How to increase CPU utilisation in XI

Similar Messages

Maybe you are looking for